I'm having a problem updating my Client profile table. I intially put
the data in with the "INSERT" SQL command that part works great. but
when I retrive the data to edit the profile it returns the correct
details and phone numbers. The problem is when I use the "UPDATE" SQL
command it saves all the data correctly except for the mobile phone
number which it drops off the last number all the time. Field sizes etc
are okay. Any help appreaciated
In Microsoft SQL Server, I have a documents table and a table whichcategorizes the documents, which we'll call categories.I tried running UPDATE statements on the categories table previouslyand I ran into a foreign key constraint. The error given was "UPDATEstatement conflicted with COLUMN REFERENCE constraint FK..."So I got rid of the Foreign Key relationship, and tried running anUPDATE statement against the categories table again.I'm now getting the following message:'Cannot UPDATE "categories" because "documents" exists.'There must be something hanging around maintaining that relationship,but I'm not sure where it would be found.I was thinking about dropping the table and then adding it back again,but I'm not entirely sure what that would do.Any help is appreciated in advance.thanks,Geoff
View 3 Replies View RelatedHi,
How can I update my users table and set the password field to a random number or string.
eg.
update tbl_users set password='a way to generate a random number say between 2000 and 100000 for example'
even better would be a randomly generated alphanumeric string.
All help much appreciated.
Cheers,
RG
I have table
id, series, seriesnr
and data
65557,AS,0
74443,AS,0
how to update table so seriesnr would be incremental , like
65557,AS,1
74443,AS,2
if i use
update x set seriesnr=select max(seriesnr) from x
then i got same seriesnr for all rows like max was calculated only one time on the begining not on each row update(why is that itseem so illogical)
65557,AS,1
74443,AS,1
this is a slight change to a fequently asked question around here. Ihave a table which contains a "sortorder" column where a user canspecify some arbitrary order for records to be displayed in. Usershave sometimes ordered records the way we used to number lines in aBASIC program (10,20,30, etc.). I'd like to do an update query and fixthis so that every record is in sequential order. I found an examplein this newsgroup of how to do this.However, I have a slight problem! Sometimes, the users duplicated thesortorders. So for example, I might have two records were thesortorder is 20. The query I found in this newsgroup does not work inthat case. Here is some code so that you can see what I mean.create table sorttest (label char(5),sortorder int)goinsert sorttest values ('joe',20)insert sorttest values ('dan',10)insert sorttest values ('jim',44)insert sorttest values ('tom',20)insert sorttest values ('jan',50)-- data dumpselect label, sortorder from sorttest order by sortorder-- I'd like to fix all of the sortorder fields so that they aresequentialupdate sorttestset sortorder = (select count(*)from sorttest subquerywhere sorttest.sortorder <= subquery.sortorder)-- note that tom and joe BOTH HAVE SORTORDER = 4select label, sortorder from sorttest order by sortorderdrop table sorttestThanks in advance for any help.
View 19 Replies View Related
Hi, I need to update a number of columns in a number of tables - I just don't know how many. In this case, I am updating all varchar fields and nvarchar fields to be converted to lower case. The problem is that the table structure is amended over time as columns are added programmatically, so I do not know which tables have which columns and if so which of them are varchars.
I can get a table of which fields I need to update using:
SELECT TABLE_NAME, COLUMN_NAME, ORDINAL_POSITION, DATA_TYPE
INTO tblTempLCase
FROM information_schema.columns
WHERE DATA_TYPE LIKE '%varchar'
and I can do the update with UPDATE tblxxx SET column = LOWER(column)
But what I don't know is how to step through my temporary table and do the updates. I can do it in ASP.NET, but that involves pushing commands and data between ASP and SQL, and will be too slow. How do I do it in SQL?
Thanks,
Dave Stephens
Hi,
I need to update a number of columns within a number of tables - I just don't know how many. In this case, I want to convert all varchar and nvarchar columns to lower-case versions of themselves. The problem is that the table structure is changed programatically, and so at any point in time I cannot be certain what fields are in which table, and what data type they are.
I know that I can get a lit of columns using:
SELECT TABLE_NAME, COLUMN_NAME, ORDINAL_POSITION, DATA_TYPE
INTO tblTempLCase
FROM information_schema.columns
WHERE DATA_TYPE LIKE '%varchar'
and do the update using:
UPDATE tblABCDE SET column = LOWER(column).
In ASP.NET I can pull in this temporary table using a SQL Data Adapter, and then step through the records to formulate the UPDATE statements and execute them all. However, I hope that this is possible in SQL too, so that I do not have to keep firing data/commands between ASP and SQL, as it should be quicker, and is also neater.
If so, how do you do it?
Thanks,
Dave Stephens
Hi,
I need to update a number of columns within a number of tables - I just don't know how many. In this case, I want to convert all varchar and nvarchar columns to lower-case versions of themselves. The problem is that the table structure is changed programatically, and so at any point in time I cannot be certain what fields are in which table, and what data type they are.
I know that I can get a lit of columns using:
SELECT TABLE_NAME, COLUMN_NAME, ORDINAL_POSITION, DATA_TYPE
INTO tblTempLCase
FROM information_schema.columns
WHERE DATA_TYPE LIKE '%varchar'
and do the update using:
UPDATE tblABCDE SET column = LOWER(column).
In ASP.NET I can pull in this temporary table using a SQL Data Adapter, and then step through the records to formulate the UPDATE statements and execute them all. However, I hope that this is possible in SQL too, so that I do not have to keep firing data/commands between ASP and SQL, as it should be quicker, and is also neater.
If so, how do you do it?
Thanks,
Dave Stephens
I have a Users Table. It is full of users already and I would like to start using the UserPIN in the software (this is an nvarchar column).
I would like to update the UserPIN column with the row_number. All of my efforts have resulted in setting the UserPIN to 1 for every record. I just want an update query that fill the UserPIN column in sequential order.
hello friends
i want to update one column from my table regularly on sequence number i.e. 0,1,2,3,4,5
i created procedure but it is not working as per my output
declare @IndexIDGen int
declare @ID int
set @ID = 0
update temp_test set indexid = NULL
declare IndexIDGen cursor for select indexid from temp_test
open IndexIDGen
FETCH Next from IndexIDGen into @IndexIDGen
while @@fetch_status = 0
begin
update temp_test set indexid = @ID where indexid is null
set @ID = @ID + 1
print @id
fetch next from IndexIDGen into @IndexIDGen
end
close IndexIDGen
deallocate IndexIDGen
where i am going in wrong direction ??????
T.I.A
Hi,
i read from help files that "For UPDATE, INSERT, and DELETE statements, the return value is the number of rows affected by the command. " Anyone know how to get the return value from the query below?
Below is the normal way i did in vb.net, but how to check for the return value. Please help.
========
Public Sub CreateMySqlCommand(myExecuteQuery As String, myConnection As SqlConnection)
Dim myCommand As New SqlCommand(myExecuteQuery, myConnection)
myCommand.Connection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
End Sub 'CreateMySqlCommand
========
Thank you.
I have a table where I would like to update the document number row for 3k rows. The problem I have is that the documents come in sets of two (version 1 and 2) but both have different numbers. Picture it like this below:
DOCNUM: 4445787 Version 1
DOCNUM: 4445790 Version 2
It should be the same docnum (ie 4445787 Version 1, 4445787 Version 2).
The challenge is how can we assign the new docnum for version 1 to be also for version 2 as well. Basically in SQL we need a way to
1. Find a way to distinguish the pair of documents in the target db that are the same even though they have different docnums.
2. Update them so that the docnums match.
Below is the resultset I got using the following SQL statement
SELECT ROW_NUMBER() OVER (PARTITION BY ID ORDER BY create_date DESC) AS RowNum
,ID
,create_date
,NULL AS end_date
FROM dbo.Table_1
Resultset:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 NULL
[Code] ....
Now, I want to update the end_date column with the create_date's values for the next row_number. Desired output is shown below:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 2015-02-18
[Code] ....
Hi, can anyone teach me how to automatic create a invoice number and insert or update it to a column?
View 2 Replies View RelatedI have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cd permit_nbr reference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1 991 100003
ABC1 992 100004
ABC1 993 100005
ABC2 880 100006
ABC2 881 100007
ABC2 881 100007
ABC2 882 100008
ABC2 882 100008
Is there a way we can prevent a object owner from dropping his tables. Example:
There is a user called 'tom' who is given create table permissions, 'tom' creates the table completes his dev and then the table is moved into production where 'tom' is still the owner. However, in production, 'tom' does not have the create table privs. Because 'tom' is the owner of the table, he is still able to drop the table in production. This is what I am trying to avoid. I would like to retain 'tom' as the owner and want to take away his create/drop privs.
Does anyone have any generic scripts that Drop all the statistics that SQL auto generates?? I have hundreds of '_WA_....'
indicies that are auto created by SS7 and I just want to get rid of ALL of them. Thanks!
Simple heres the syntax Alter Table XX Drop PRIMARY KEY.
This is not working whats up?
Thanks,
Phil
Whats the quickest way to drop a column from a table with 1 million rows.
This is for SQL Server 6.5
Thanks for all the responses,
Chan
I need to drop a database but cannot because there are 2 open connections that I cannot drop via EM. Is there a way to do this without starting and stopping??
View 2 Replies View RelatedHi,
I`m new at SQL Server so excuse me if this question sounds dumb.
Does anybody know how to drop columns in a table. I know I can drop and re-build the table,
but I would prefer and easier way.
Thanks
-Z
Hi,
After I drop the database, I backed up the master database, I recreate the database with new name. When I tried to do the import on the command level,
It gives me the error:
Attempt to locate entry in the sysdatabases for database 'db1' by name,
failed -- no entry found in that name.
What should I do? Thanks.
I have run the following script to create a default on a table:
alter table TableXYY
add default 0 for ColumnX
Now, how do I delete this default (without re-creating the table)??
Thanks
Anyone know how to drop all users associated with a particular login not matter what database they're contained in?
ie login AdminUser / User AdminUser (in databases master, Dev1)
....
Thus, is there a way to drop the AdminUser login above and associated user
AdminUser in databases master, Dev1 in example above.
Thanks
Hi friends,
How I can drop a database insatance from a different server ( data base is SQL Server 2005) from my code
Hoping a early reply ....
Thanks :)
Hi
I am using SQL server 7 database and ASP as front end. I run an application where a text file is loaded into database. After this is done procedures are run to create a set of tables that have snapshots of the data in the text file.. each time i load a new text file i want to create the snapshots.. i hve written a stored procedure to create tables and insert values into the tables.. however how do i delete the tables i created the previous time.. the number of snapshots and their names will depend on the size of the text file.. how do i refer to all the snapshots created and drop them all before creating new ones?
plese guide
regds
Looking for suggestions.
I have a database that is giving me a bad Index error. When I go to drop the necessary Index it is telling me that it either does not exist or cannot be dropped. However when I try to build that index, it tells me one already exists.
Is there any way to drop all of the indexes or at the very least see what the indexes are? This particular database is using 2005 Express.
Any help would be great!
Shawn
How to remove the constraints on a table in sql server 2000? I need to drop the column, so i need to drop the constraint before that.
Alter Table Table_Name NO CHECK constraints ALL.
Once I execute the above one, it says, "Successfully Executed" but when I try to drop it doesnt allow me and gives me the following error:
Server: Msg 5074, Level 16, State 1, Line 1
The object 'DF_Users_Created_by' is dependent on column 'CREATED_BY'.
Server: Msg 4922, Level 16, State 1, Line 1
ALTER TABLE DROP COLUMN CREATED_BY failed because one or more objects access this column.
Any ideas?
Thanks,
I think the answer to this question will be something like 'you'll have to re-initialize the subscribers', but I need to ask anyway...
I created a publication where my foreign key constraint we NOT created with NOT FOR REPLICATION. My publication is configured to replicate DDL changes. Is there any way I can drop and re-create the constraint in the publisher and get replication to push the change to the subscribers?
Thanks for your help
Graham
I have trouble dropping a job that was a maintence plan.
I get the following error. Is there a way around this?
TITLE: Microsoft SQL Server Management Studio
------------------------------
Drop failed for Job 'Maintenne Plan'. (Microsoft.SqlServer.Smo)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The DELETE statement conflicted with the REFERENCE constraint "FK_subplan_job_id". The conflict occurred in database "msdb", table "dbo.sysmaintplan_subplans", column 'job_id'.
The statement has been terminated. (Microsoft SQL Server, Error: 547)
I am trying to run a dymanic DROP DATABASE <dbname> command in a stored procedure called from ASP.NET. I typically connect from the .net using a SQL builtin account. I am getting this error:
System.Data.SqlClient.SqlException: Cannot drop the database 'db_testco', because it does not exist or you do not have permission.
The database is there for sure asI can browse it via the Studio manager. What permission do I need to set for my .net login to allow it to drop ? I tried adding the Delete permission to the database and still no go...
Setup: SQL 2005 SP2 2 Node cluster.
Thanks.
Hi,
I have a table with multiple column and has millions of rows in it(say about 50 millions ) and its in production.
What is the best way of dropping the a column from the table without impacting the systems performance. Remeber this table will be used some application to get some data out of it.
~Mohan
I am having following issue recreating my service broker
This could be a trivial fix...
when i execute the following query..
open master key decryption by password = 'pass1234$'
alter master key drop encryption by password = 'pass1234$'
close master key
drop master key
go
I get the following result..
Msg 15558, Level 16, State 1, Line 3
Cannot drop encryption by password '********'.
Msg 15580, Level 16, State 1, Line 5
Cannot drop master key because certificate 'BackofficeServiceAccount' is encrypted by it.
But 'BackofficeServiceAccount' was already dropped.
Can any one help me how to drop master key?
I appreciate any input..
regards...