how to update a temp table with another temp table for example I have #tempdashboard that has info in it.I also have #tempappscount of which I want to insert the info inside it into #tempdashboard...I believe the column in #tempdashboad is DailyAppsInINT,
I did a query that gave me the number of daily apps created. I was told to create #tempappscount and my query to dump into #tempappsaccount. Then dump the info from #tempappsaccount into #tempdashboard.
Hi all,
Looking at BOL for temp tables help, I discover that a local temp table (I want to only have life within my stored proc) SHOULD be visible to all (child) stored procs called by the papa stored proc.
However, the following code works just peachy when I use a GLOBAL temp table (i.e., ##MyTempTbl) but fails when I use a local temp table (i.e., #MyTempTable). Through trial and error, and careful weeding efforts, I know that the error I get on the local version is coming from the xp_sendmail call. The error I get is: ODBC error 208 (42S02) Invalid object name '#MyTempTbl'.
Here is the code that works:SET NOCOUNT ON
CREATE TABLE ##MyTempTbl (SeqNo int identity, MyWords varchar(1000))
INSERT ##MyTempTbl values ('Put your long message here.')
INSERT ##MyTempTbl values ('Put your second long message here.')
INSERT ##MyTempTbl values ('put your really, really LONG message (yeah, every guy says his message is the longest...whatever!')
DECLARE @cmd varchar(256)
DECLARE @LargestEventSize int
DECLARE @Width int, @Msg varchar(128)
SELECT @LargestEventSize = Max(Len(MyWords))
FROM ##MyTempTbl
SET @cmd = 'SELECT Cast(MyWords AS varchar(' +
CONVERT(varchar(5), @LargestEventSize) +
')) FROM ##MyTempTbl order by SeqNo'
SET @Width = @LargestEventSize + 1
SET @Msg = 'Here is the junk you asked about' + CHAR(13) + '----------------------------'
EXECUTE Master.dbo.xp_sendmail
'YoMama@WhoKnows.com',
@query = @cmd,
@no_header= 'TRUE',
@width = @Width,
@dbuse = 'MyDB',
@subject='none of your darn business',
@message= @Msg
DROP TABLE ##MyTempTbl
The only thing I change to make it fail is the table name, change it from ##MyTempTbl to #MyTempTbl, and it dashes the email hopes of the stored procedure upon the jagged rocks of electronic despair.
Any insight anyone? Or is BOL just full of...well..."stuff"?
I have an application that I am working on that uses some small temptables. I am considering moving them to Table Variables - Would thisbe a performance enhancement?Some background information: The system I am working on has numeroustables but for this exercise there are only three that really matter.Claim, Transaction and Parties.A Claim can have 0 or more transactions.A Claim can have 1 or more parties.A Transaction can have 1 or more parties.A party can have 1 or more claim.A party can have 1 or more transactions. Parties are really many tomany back to Claim and transaction tables.I have three stored procsinsertClaiminsertTransactioninsertPartiesFrom an xml point of view the data looks like this<claim><parties><info />insertClaim takes 3 sets of paramters - All the claim levelinformation (as individual parameters), All the parties on a claim (asone xml parameter), All the transactions on a claim(As one xmlparameter with Parties as part of the xml)insertClaim calls insertParties and passes in the parties xml -insertParties returns a recordset of the newly inserted records.insertClaim then uses that table to join the claim to the parties. Itthen calls insertTransaction and passes the transaction xml into thatsproc.insertTransaciton then inserts the transactions in the xml, and alsocalls insertParties, passing in the XML snippet
View 2 Replies View RelatedI have 3 Checkbox list panels that query the DB for the items. Panel nº 2 and 3 need to know selection on panel nº 1. Panels have multiple item selection. Multiple users may use this at the same time and I wanted to have a full separation between the application and the DB. The ASP.net application always uses Stored Procedures to access the DB. Whats the best course of action? Using a permanent 'temp' table on the SQL server? Accomplish everything on the client side?
[Web application being built on ASP.net 3.5 (IIS7) connected to SQL Server 2005)
I'm trying to update a table from a temporary table but I'm struggling a little with the syntax. Here's what I have so far:
DECLARE @WeekNo INT
SET @WeekNo = 1
WHILE @WeekNo <= 53
BEGIN
SET @SQL = 'UPDATE [Targets]
SET [Target] = SELECT ISNULL(Week' + Cast(@WeekNo as VarChar(2)) + ', 0) FROM #targets
WHERE [CampaignID] = @CampaignID'
SET @WeekNo = @WeekNo + 1
EXECUTE (@SQL)
END
My temp table gets created OK, it's just setting the 'Target' field to the value of the same field in my temp table.
I get the following errors:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'SELECT'.
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ' + Cast(@WeekNo as VarChar(2)) + '.
Can anyone help?
Thanks in advance,
Brett
below is the complete code of two temp talbe , the first temp talbe i created so for others it is easy to see what fields I am copying into the temptable.
So what I am doing is that, copying the values from #RealTable into the #Rpt table. Later I want to check the values into the some column and than on certain condtions I am going to update the values. But the way I am doing is I am using the update statment to change the values, where as I think there must be a better way of doing what I am doing in these codes. So instead of using the updates like 6 times or more I can just use them maybe twice. Or probably not at all.
Please give your idea. Thanks.
Code is running and you can try.
I just depict a litttle code here but in real i have 30 columns and the data is coming from the complex join statments. And I am doin the updates for 8 times.
BEGIN
Create table #RealTable
(
LastName varchar (20)
,Phone varchar (20)
,MissingInfo varchar (100)
,ErrMessage varchar (255)
);
--
Insert INTO #RealTable Values('Abraham','917 250 9999', '1', 'Need More Paper')
Insert INTO #RealTable Values('Sar', '917 999 9999', '2', 'Need ID')
Insert INTO #RealTable Values('John', '732 888 8888', '3', 'Need More Paper')
Insert INTO #RealTable Values ('Sal', '555 555 5555', '4', 'Legal Documentation')
Create table #Rpt
(
LastName varchar(20)
,Phone varchar(20)
,MissingInfo varchar(20)
,ErrMessage varchar(255)
,TextMessage varchar(255)
,CheckMark varchar(1)
)
Insert INTO #Rpt
Select
LastName
,Phone
, MissingInfo
,ErrMessage
,'' AS TextMessage
,'' AS CheckMark
From #RealTable
Select * from #Rpt
--Now i saw the result which is what I have inserted.
--but I want to fill the values of the TextMessage and the CheckMark.
--So there could be a way to do what I am doing following.
Update #Rpt
Set TextMessage='Please send the signed copy'
Where MissingInfo='Need More Paper'
Update #Rpt
Set TextMessage='Send us photo copy of your ID'
Where MissingInfo='Need ID'
Update #Rpt
Set TextMessage='Send the legal copy of the document'
Where MissingInfo='Legal Documentation'
Update #Rpt
set CheckMark='a'
where MissingInfo in ('1','3','4') AND ErrMessage='Need More Paper'
Select * From #Rpt
END
I am attempting to execute a stored procedure as the sql query for a data transformation from sql into an excel file. The stored procedure I am calling uses temp tables (#tempT1, #tempT2, etc.) to gather results from various calculations. When I try to execute this sp, I get
'Error Source: Microsoft OLE DB Provider for SQL Server
Error Description: Invalid Object name "#tempT1"'
Is there a way to make a DTS package call a stored procedure that uses temp tables?
Thanks.
Hi,
I want to check to see if a temporary table exists before I try creating one but I can't seem to find which sys table or schema collection I check. Any ideas?
Seoras
I have a stored proc that creates a temporary table, then calls several other stored procs to insert data.
CREATE PROCEDURE usp_CreateTakeoff
@iEstimate int,
AS
CREATE TABLE ##Temp_Takeoff
(
Field1 ......
Field2 ......
)
-- Add Structural data
usp_AddStructural @iEstimateID, 1, 'Structural'
usp_AddForming @iEstimateID, 2, 'Forming'
...
...
...
GO
Now, a couple of problems, after the table is created and populated, I cannot find it in my list of tables, even after "refreshing".
I checked to ensure that it exists using the query analyzer and it does so I know the table is being created.
Also, I cannot see the table using crystal reports, connecting etc...... Can I not access a temporary table from 3rd party applications? I have crystal reports 7.0 professional.
Any ideas?
Mike B
Hey,
I am in the process of modifying some stored procedures that currently do not use temp tables. For this modification I am required to make the stored procedures use temp tables. There are several UDF's within this stored procedure that will need to use the temp tables, and this is where in lies the problem. Does anyone know of a work around that would allow UDF's to use temp tables, or does anyone know of alternate methods instead of temp tables that wouldn't involve too much change?
Thanks
Hi,
I have a called stored procedure which creates a bunch of temporary tables, inserts data into them, indexes the tables and then returns to the main calling SP. In the main stored procedure I then do SELECTs from the temporary tables. My problem is I keep getting
invalid object errors on the temporary tables:
Invalid object name '#temp_table1'
The stored procedure is in a test environment. In the SELECT I tried a prefix of database owner (my logon) as well as "dbo." but still get the error. Any suggestions as to what I am doing wrong would be much appreciated.
Thanks,
Jeff
hi All,
I am using a temp table creating it as
create table #process
(
tons of coomuns in here
)
then
insert into #process(collumns)
select from peon
where etc....
Can i use the same temp table definition , but insert into another tempTable.Does alias help me accomplish this task.
Thanks for your input
In these two tables im just to bring the data back where the two DesignID's dont match. Im gettin an error
Server: Msg 107, Level 16, State 3, Line 1
The column prefix '#ttTopSellers' does not match with a table name or alias name used in the query.
Declare @CustomerID as VARCHAR(25)
Set @CustomerID = 'DELCOZ01-10'
/*Figure the designs that stores carry*/
Select Design.Description, Item.DesignID,
CustomerClassificationID, CustomerID, Region.[ID] as RegionID, Region.Name
Into #ttDesign
From Mas.dbo.Item Item
Inner Join MAS.dbo.Style Style
on Item.StyleID = Style.[ID]
Inner Join MAS.dbo.Line Line
on Style.LineID = Line.[ID]
Inner Join MAS.dbo.Design Design
on Item.DesignID = Design.[ID]
Inner Join Mas.dbo.DesignRegionIndex DRI
on Design.[ID] = DRI.DesignID
Inner Join MAS.dbo.Region Region
on DRI.RegionID = Region.[ID]
Inner Join MAS.dbo.CustomerClassificationRegionIndex CRI
on Region.[ID] = CRI.RegionID
Inner Join MAS.dbo.CustomerClassification CC
on CRI.CustomerClassificationID = CC.[ID]
Where @CustomerID = CustomerID
Group By Design.Description, Item.DesignID,
CustomerClassificationID, CustomerID, Region.[ID], Region.Name
/*This finds the top retail sales globally*/
Select Top 10 Sum(Sales) as Sales, DesignID, Design.[Description]
Into #ttTopSellers
From Reporting.dbo.RetailSales_ByStore_ByCustomer_ByDay_ByItem DI
Inner Join Mas.dbo.Item Item
on DI.ItemNumber = Item.ItemNumber
Inner Join MAS.dbo.Style Style
on Item.StyleID = Style.[ID]
Inner Join MAS.dbo.Line Line
on Style.LineID = Line.[ID]
Inner Join MAS.dbo.Design Design
on Item.DesignID = Design.[ID]
Where [Date] >= Month(getdate())-12
and DesignID <> 0
Group By DesignID, Design.[Description]
Order by Sum(Sales) Desc
Select *
From #ttDesign
Where #ttDesign.DesignID <> #ttTopSellers.DesignID
--Drop Table #ttDesign
--Drop Table #ttTopSellers
Why cant I use the same temptable name i a stored procedure after i have droped it?I use the Pubs database for the test case.CREATE PROCEDURE spFulltUttrekk ASSELECT *INTO #tempFROM JobsSELECT *FROM #tempDROP TABLE #tempSELECT *INTO #tempFROM EmployeeSELECT *FROM #temp
View 1 Replies View Related
I am having problem with my temp table.
I cannot get the syntax correct.
I need to do the following, If @mybit & br > 0 then
insert childid 'condidtion case when br & @mybit > then 0'
into the temp table.
CREATE TABLE #tmp_table(
childid integer null
)
IF @mybit & br > 0 THEN
INSERT INTO #tmp_table
SELECT c.childid
VALUES (childid,
CASE WHEN br & @mybit > 0 THEN 1 ELSE 0
END)
FROM
child c
I sometimes get the following error from an update statement in astored procedure:Transaction (Process ID 62) was deadlocked on thread | communicationbuffer resources with another process and has been chosen as thedeadlock victim. Rerun the transaction.The isolation level is READ UNCOMMITTED and there are no explicittransactions in the stored procedure. The update statement is asfollows:UPDATE PLSET PL.PL_SI_LAST_YEAR_AMOUNT = #tmpWorkPLPrior.PRIOR_AMOUNTFROM #tmpWorkPLPriorWHERE PL.COMPANY = @compAND PL.PLAN_YEAR = @yearAND PL.FORECAST_QUARTER = @qtrAND PL.VERSION_ID = @verAND PL.BUSINESS_UNIT_CODE = #tmpWorkPLPrior.BUSINESS_UNITAND PL.PROJECT_ID = #tmpWorkPLPrior.PROJECT_IDAND PL.BUDGET_CODE = #tmpWorkPLPrior.BUDGET_CODEAND PL.BUSINESS_UNIT_CODE <> 'G7'PL rows: 24,342,553PL rows - Filtered: 230,088#tmpWorkPLPrior rows: 3,641Updated rows: 43,692The temp table (#tmpWorkPLPrior) is created by a SELECT INTO statement.It has the values that need to be set in the PL table. The PL tablehas a clustered index on 8 columns. The filters (@comp, @year, ...)select 230,088 rows. When the update succeeds it updates 43,692 rowsin about 15 seconds. Why does this sometimes deadlock and other timessucceed? There is nothing else running, so the process is deadlockingon itself.Thanks,Frank
View 4 Replies View RelatedI have a stored procedure which contains a temp table called #NamesThis has n rows of values which are peoples names (they are varchars)i.e#NamesRickRobFrankI have a table called tblPeople.tblPeopleid Name Telephone1 Ric 012334213452 Robert 0321120931233 Paul 123 123 123 123 I want to find all the people in tblPeople whose names are like those in the temp table #NamesHow do I do this?
View 1 Replies View Related Please tell me there's something I haven't set. I've done several tests now. If your final return in a stored proc is from a temp table (ala #mytable ) the system cannot read the schema - for that matter, it won't run at all, complaining that the object #mytable doesn't exists.
It can't possible be that temp tables aren't allowed in procs used by SQLDatasource - please tell me what I am doing wrong.
This proc, when fed to a sqldatasource, fails in the designer with #temp does not exists.
CREATE PROCEDURE dbo.repTest_TempASBEGIN
CREATE TABLE #Temp( [iTestID] uniqueidentifier, [bTest] [bit], [cTest] [varchar] )
INSERT INTO #TempSELECT *FROM tTest
SELECT *FROM #Temp
END
I have been researching some performance problems in a very large
application and I have a couple of questions about temp tables. (SQL 7.0
SP2)
I have one large procedure that I have been using as a test case.
Originally this procedure was a cursor with lots of processing steps
involving writing to, reading from and deleting in temp tables inside the
cursor. I remember reading that temp tables inside a cursor were a
potential performance problem, so I rewrote the procedure, replacing the
cursor with a While Loop.
Doing this showed no increase in performance. Since Profiler was showing .5
second duration times on statements in the procedure accessing the temp
tables I tested some more. I moved all the create statements to the top of
the procedure, as I know these statements after processing steps can cause
recompiles to happen. Still no performance increase.
Finally I replaced all the temp tables with actual tables, just to see what
would happen. With no other changes the performance increased by more than
500%.
Can someone give me some clues as to what is happening here, because if this
is a symptom of something I don't understand, the potential performance
problems from other places where temp tables are similarly used in the
application are enormous.
Thanks.
The problem is we need local tables in Access for SubReports (can't use store procedures as record source for this), therefore trying to create temp table and link to Access for each report instance.
When we create the ## type table in tempdb this cannot be linked from Access (cannot be seen via DSN).
The only other option we can find is doing
CREATE TABLE tempdb.dbo.[tablename]
but this requires the user to have admin permissions and therefore be 'dbo' on tempdb and not 'guest'.
Any clues?
Palmy
Is there any way to test if a table exists in the temp dB. In a procedure I create table called ##Test but I want to test if it exists before it's created and if it does I want to delete it. (It has to be a ## table because it's in a procedure being called in another procedure depending on an IF statement). The reason I want to do this is that I have multiple users and Occasionally they get the ... There is already an object named '##Test' in the database. error
Many Thanks
Hi everyone:
I am creating an sp, in which I check for the existence of a global temp table (using the exists)
statement. If the Exists returns a false, I move on to processing without the temp table. If it
returns a true, I utilize the temp table to do some inserts. I create the temp table when my
application first starts up. The problem that I am facing is that the check for the temp table`s
existence seems to be failing. Is there any other way to check for the existence of a global
temp table??
Any info really appreciated
Thanks
Nisha
Sql 2000
Hi All,
I am creating a dts package which copies data via transform data task from a sql sever connection to an excel spreadsheet connection.
The transform data task uses a query that goes like this.
create table #temp1(CName varchar(10))
Insert #temp1
select CName from tbl1
--tbl1 is in a user DB called SALES
create table #temp2(VName varchar(10))
Insert #temp2
select CName from #temp1
select * from #temp2
--I need the resultset of the last select statement into an excel spreadsheet.
The problem is I can't even create the dts package..it shows up with an error saying that #temp1 is an invalid object....I am guessing that since the default database for the transform data task has been selected as SALES it is trying to locate the the #temp1 or #temp2 table in that DB instead of looking in the TEMPDB....My question is..is there any workaround for this problem.
Sample code welcome!!!!
Any help appreciated !
TIA
Kinnu
Hi All,
I have 4 temporary tables that hold criteria selected through a report wizard.
I've created a SQL statement and used the four tables in my WHERE/ AND clauses but the results retuned are not being filtered correctly.
Would somebody be kind enough to help me out please.
To briefly summarise, I have created a SQL statement that returns all rows in my recordset, I now need to implement some additional SQL to filter the recordset using my temporary tables, which contain the filters as follows:
(1) Temp table 1 (##tblTempAssetFilt) is mandatory and will always contain at least one row.
(2) Temp table 2 (##tblTempRepairTypeFilter) is optional and may never contain any rows. If this is the case then I have no reason to filter my resultset against this table.
(3) Temp table 3 (##tblTempRepairFilter) / Temp table 4 (##tblTempRepairElementFilter) are both optional, only one of these tables will contain data at one time. Again, as an optional filter the tables may never contain rows, and thus need to be ignored.
I have the following SQL, can somebody tell me how I would go about filtering the recordset using the temporary tables. The creation of the temporary tables occurs at the beginning so will always exist even when no rows have been inserted.
SELECT *
FROM tblActualWork [ActualWork]
JOIN tblRepair [Repair] ON ActualWork.intRepairID = Repair.intRepairID
JOIN tblRepairElement [RepairElement] ON Repair.intRepairElementID = RepairElement.intRepairElementID
JOIN tblRepairType [RepairType] ON Repair.intRepairTypeID = RepairType.intRepairTypeID
JOIN tblAsset [Asset] ON ActualWork.intAssetID = Asset.intAssetID
WHERE ActualWork.intAssetID IN (Select intAssetID From ##tblTempAssetFilter) AND Repair.intRepairTypeID IN (Select intRepairTypeID From ##tblTempRepairTypeFilter)
AND Repair.intRepairID IN (Select intRepairID From ##tblTempRepairFilter)
AND Repair.intRepairElementID IN (Select intRepairElementID From ##tblTempRepairElementFilter)
Any filtering must be based on the recordset filtered by temp table 1, which is a mandatory filter. Rows will always exist in this temp table.
Please help, not having much joy with this. Many thanks.
I have 2 temporary tables from a previous operation, Tab1 and Tab2, with the same dimensions. How do I create a third table Tab3 with the same dimensions containing the the combined rows of the 2 previous tables? TIA!
Tab1
Col1 Col2 Col3
A1 B1 C1
A2 B2 C2
Tab2
Col1 Col2 Col3
X1 Y1 Z1
X2 Y2 Z2
X3 Y3 Z3
After the required sql operation I should have
Tab3
Col1 Col2 Col3
A1 B1 C1
A2 B2 C2
X1 Y1 Z1
X2 Y2 Z2
X3 Y3 Z3
I have two temporary tables, both contain field 'BranchID'.
First table @TEMPNET returns 10 different BranchIDs, but the second table @TEMPCREDIT returns only 7 of those IDs, so when I run select from both tables 'WHERE N.BranchID = C.BranchID2' the result is blank. If I limit both tables to the IDs that are the same in both sets, it works.
How can I get ALL the results from table1 AND the results from table2 which match table1?
DECLARE @TEMPNET
TABLE
( BranchID int
, NetSales decimal(18,4)
, Cost decimal(18,4)
, SaleMonthNbr int
, SaleMonth varchar(15))
[Code] ....
Hi how can I delete a local temp table?
I know a golbal is deleted by
if exists(select * from tempdb..sysobjects where name='##MyTemGlobalTable' and type='U')drop table ##MyTemGlobalTable'
but how do I drop a #MyTemGlobalTable' ?
thank you
I need help on how to compare two temp tables. I have to compare two temp tables from two diferent server. Here is what I have done so far...
CREATE PROC dbo.swn_sp
AS
/********************************************************************
*Program Name:
*
*
*********************************************************************
*
*Modification History:
*********************************************************************
--*************************************************************
--SET SQL STMT BASED ON SQL TYPE PASSED IN
--*************************************************************/
/* Create a Temp Table */
Create Table #TP_DGC(
station_nbr char (20),
station_name varchar (40),
group_code char (12),
beg_eff_date_DGC datetime,
end_eff_date_DGC datetime)
--------------Selection Gathering Table-------------------
DECLARE @groupcodechar (12),
@stationnumber char(20),
@stationamevarchar(40),
@begdateGdatetime,
@endeffdateGdatetime,
@Recordsint,
@record_found_flagchar(1),
@current_date datetime
SELECT Distinct a.station_nbr, c.station_name, a.group_code,
a.beg_eff_date As beg_eff_date_DGC, a.end_eff_date As End_eff_date_DGC
from TIES_Gathering.dbo.station_group a
Inner Join TIES_Gathering.dbo.station c on a.station_nbr = c.station_nbr
Inner Join TIES_Gathering.dbo.station_type d on a.station_nbr = d.station_nbr
Inner Join TIES_Gathering.dbo.group_detail e on a.group_code = e.group_code
Where ((e.group_type = 'NPN')or(e.group_type = 'WTF')or(e.group_type = 'NTF'))and
((d.type_code = 'WHM')or (d.type_code = 'CRP')) and (a.pipeline_code = '100000')
Order by a.station_nbr, a.group_code
INSERT INTO #TP_DGC(station_nbr,station_name,group_code,beg_eff_date_DGC,end_eff_date_DGC)
values (@stationnumber, @stationame,@groupcode,@begdateG,@endeffdateG)
--------------Selection Marketing Table-------------------
Create Table #TP_SES(
station_nbr char (20),
station_name varchar (40),
group_code char (12),
beg_eff_date_SES datetime,
end_eff_date_SES datetime)
DECLARE @groupcode_Mchar (12),
@stationnumber_M char(20),
@stationame_Mvarchar(40),
@begdateMdatetime,
@endeffdateM datetime,
@Records_Mint,
@record_found_flag_Mchar(1)
Select Distinct a.station_nbr,b.station_name,a.group_code, a.beg_eff_date As beg_eff_date_SES, a.end_eff_date As End_eff_date_SES
From TIES_Marketing.dbo.station_group a
Inner Join TIES_Marketing.dbo.station b on a.station_nbr = b.station_nbr
Inner Join TIES_Marketing.dbo.station_type c on a.station_nbr = c.station_nbr
Inner Join TIES_Marketing.dbo.group_detail e on a.group_code = e.group_code
Where ((c.type_code = 'WHM')or (c.type_code = 'CRP')) and (a.pipeline_code = '100001')
Order by a.station_nbr, a.group_code
INSERT INTO #TP_SES(station_nbr,station_name,group_code,beg_eff_date_SES,end_eff_date_SES)
values (@stationnumber, @stationame,@groupcode,@begdateM,@endeffdateM)
---------------compare both tables--------------------
Begin
Select #TP_SES.station_nbr, #TP_SES.station_name, #TP_SES.station_group,
#TP_DGC.beg_eff_date As beg_eff_date_DGC, #TP_DGC.end_eff_date As End_eff_date_DGC,
#TP_SES.beg_eff_date As beg_eff_date_SES,#TP_SES.end_eff_date As End_eff_date_SES
from #TP_SES left outer join #TP_DGC on station_nbr=station_nb
end
----- drop temporary tables---
drop table #TP_DGC
drop table #TP_SES
go
Thanks in advance for the Help!!!!!
Does anyone know how to compare two temp tables using a left outer join? I have to find the diferences between Temp Table A and Temp Table B.
View 4 Replies View RelatedI need help on two questions:1. Is temp table the only way to pass recordsets from a nested storedprocedure to a calling stored procedure? Can we avoid temp tables inthis case?2. Are operations in a stored procedure are treated as a transaction?Any help will be greatly appreciated.Background: We need to use temp table to pass recordsets from a nestedstored procedure to a calling stored procedure. Our understanding isthat in this case, we have no choice but to use temp tables. So, weneed to optimize the performance as much as possible. To do this, wewanted to find out whether operations in a stored procedure are treatedas a transaction. We are using SQL 2000 SP4. I could not find anyanswers so I did the following experiment.Experiment 1:SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[Wiz_SP_Transaction_Test]') and OBJECTPROPERTY(id,N'IsProcedure') = 1)drop procedure [dbo].[Wiz_SP_Transaction_Test]GOCREATE PROCEDURE [dbo].[Wiz_SP_Transaction_Test]ASUpdateArticlesSETIsUpdate = 20whereArticlesId < 80000SELECT * from ArticlesGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO"SELECT * from Articles" takes a long time (about 40 seconds) tocompleteBefore executing the SP, the IsUpdate attribute for all articles is 30.Then I executed this SP. Before the SP is finished, I end the SPmanually. I checked the IsUpdate attribute again, and found that allArticles's (ArticlesId < 80000) Isupdate attribute is now 20. Theoperations did not rollback. I interpret this to mean that the whole SPis not treated as a transaction.Then, I did experiment 2 below. This time, I explicitly declared thetransaction.SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[Wiz_SP_Transaction_Test]') and OBJECTPROPERTY(id,N'IsProcedure') = 1)drop procedure [dbo].[Wiz_SP_Transaction_Test]GOCREATE PROCEDURE [dbo].[Wiz_SP_Transaction_Test]ASBEGIN TRANSACTIONUpdateArticlesSETIsUpdate = 50whereArticlesId < 80000SELECT * from ArticlesIF @@ERROR <0 ROLLBACK TRANSACTIONCOMMIT TRANSACTIONGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOBefore this second SP, the IsUpdate attribute is 20 (set in the firstexperiment). I run this second SP and ended it manually before itfinished. I checked the IsUpdate attributes for all Articles's(ArticlesId < 80000), but their Isupdate attribute is 50. So theoperation did not rollback either. But we have declared the transactionexplicitly. Does this mean that the SP is still not treated as atransaction?
View 6 Replies View RelatedI'm relatively new to SQL-Server, and I have a quick question abouttemporary tables. I am using a function from Erland Sommarskog'sexcellent article about arrays in SQL server.Erland's approach uses a user-defined function, which parses a stringof delimited values (integers) into a temporary table. The temporarytable is joined to tables in a stored procedure select statement tolimit the records returned.The question is, what happens to the temporary table generated by thefunction? Is it implicitly destroyed when the stored procedurefinishes? Does it need to be dropped explicitly (something not done inhis examples)?Also, what are the implications of scope, if multiple users areaccessing the stored procedure through a web application?Thanks in advance,Tim
View 2 Replies View RelatedHi group,
I want to create several global temp tables. I've created a script:
if not object_id('tempdb..##tbl_ProductTypes') is null
begin
drop table ##tbl_ProductTypes
end
select * into ##tbl_ProductTypes from dbo.tbl_ProductTypes
This script creates a global temp table. When I run it in QA the table is created. When I close QA the table is dropped. This is correct since I found the following in BoL:
[Global temporary tables are automatically dropped when the session that created
the table ends and all other tasks have stopped referencing them. The
association between a task and a table is maintained only for the life of a
single Transact-SQL statement. This means that a global temporary table is
dropped at the completion of the last Transact-SQL statement that was actively
referencing the table when the creating session ended.]
I created a job that executes the statement above. The job exists with success, however the table is not created!
Why wasn't the table created??
TIA
Regards,
SDerix
I had a SP to generate a recordset for a MIS report. It had 11 temp tables , basically taking data from real tables , performing some aggregation and counts and passin on the records to a temp table which gave the result as desired ..ofcourse with some group by clauses...
Now i replaced these temp tables (most of them..left with just 2), and used derieved tables instead in the final query..and joins which will execute with each query iteration..something of the sort
select col1,co2 ,
(select count(id) from sometable x group by sayaccount where x.id = temp.id) ,
(select sum(id) from (select count(id) from sometable group by sayaccount) DERIVED_Tab),
......
from #finaltemp temp
group by col1.....
(earlier the count was stored in 1 temp table, then sum one n stored in other).
the idea was to reduce the execution time...but i din achieve it...not with just a single user running the report i.e , rather it marginally increased. my thinking was that i'll be avoiding the locks on tempdb by reducing the number of temp tables....pls tell me if im goin wrong...i still have the option of using table datatype if thats feasible..