I want to write an update statement that updates a column in Table1 with the result of a calculation. The problem is that the calculation uses two different values (both from Table2) depending on the. It goes something like this:
UPDATE dbo.Table1 SET A = Table1.A * (
(Calculation > 0) * (SELECT PositiveModifier FROM Table2 WHERE Table2.ID = Table1.T) +
(Calculation <= 0) * (SELECT NegativeModifier FROM Table2 WHERE Table2.ID = Table1.T))
I know this syntax doesn't work, but it should give an understanding of what I want to do.
Of course I can add a where clause that only updates tables where the calculation > 0 and then another one that updates the other half, but I'm sure this can be done as a single statement.
I am new the asp.net. I have written the following code and cannot get it to read from my text boxes to assign the values to the parameters. When I use a fixed value in a string variable and set the parameter to it, I can make it work, but not from the text boxes. Any help is greatly appreciated. Thanks
Sub btnUpdate_Click(ByVal s As Object, ByVal e As EventArgs)
' Connect to DB Dim conInventory As SqlConnection Dim cmdUpdate As SqlCommand Dim strCommand As String Dim test As String test = "hello" 'my attempt to test the sql parameter strCommand = ""
conInventory = New SqlConnection("server=server;uid=id;pwd=pwd;database=db")
cmdUpdate = New SqlCommand("Update [tw48_inventory] Set [Date]=@Date", conInventory) cmdUpdate.Parameters.Add(New SqlParameter("@Date", SqlDbType.VarChar, 50)) cmdUpdate.Parameters("@Date").Value = test 'cmdUpdate.Parameters.Add(New SqlParameter("@Date", test)) 'works with constant string value conInventory.Open() cmdUpdate.ExecuteNonQuery()
conInventory.Close()
End Sub Sub Page_Load() ' Connect to DB Dim conInventory As SqlConnection Dim cmdSelect As SqlCommand Dim dtrReader As SqlDataReader
conInventory = New SqlConnection("server=server;uid=id;pwd=pwd;database=db") conInventory.Open()
cmdSelect = New SqlCommand("Select * From tw48_inventory", conInventory) dtrReader = cmdSelect.ExecuteReader
One of the requirements of the UpdateParameters for a GridView I'm building is that the fields that are being edited via EditItemTemplates are passed back to the UpdateParameter as XML. How would I go about combining the fields from the GridView/EditItems into an XML string that I can set as an asp:Parameter? Thanks.
I need to know how to setup the ControlParameter for a template control in my Gridview? I have a datepicker in my template and I need to know how to refer to it in the ControlParameter of the SQLDataSource control. <UpdateParameters> <asp:ControlParameter Name="dp_start" ControlID="bdpPlanStart" PropertyName="SelectedValue" Type="Datetime" /> Here is the template:<asp:TemplateField HeaderText="Start" SortExpression="dp_start"> <ItemTemplate> <%#DataBinder.Eval(Container, "DataItem.dp_start", "{0:d}")%> </ItemTemplate> <EditItemTemplate> <BDP:BasicDatePicker id="bdpPlanStart" SelectedValue='<%# DataBinder.Eval(Container.DataItem,"dp_start") %>' runat="server" DateFormat="d"> </BDP:BasicDatePicker> </EditItemTemplate> </asp:TemplateField>
I'm trying to update a database field using an update parameter for a stored procedure. The field is defined as float in SQL Server 2000 so I'm using this line. However, if I enter 2.25 or 2.5 or similar in txtResourceHours.Text, the value is always rounded to the nearest whole number and stored in the database like this. cmdUpdate.Parameters.AddWithValue("@resourcehours", SqlDbType.Decimal).Value = txtResourceHours.Text Stored Procedure Code: @resourcehours as decimal(4),
The problem is with @NUMERY parameterin code behind i setDim dr As GridViewRowDim numery As Stringnumery = "" For Each dr In GridView1.RowsDim numeros As Label = dr.Cells(0).Controls(1)numery += numeros.Text & ", "Next numery = numery.TrimEnd(", ") SqlDataSource1.UpdateParameters("NUMERY").DefaultValue = numery'so numery will look like this 123, 65465, 54616, 56465Update command looks like this :UpdateCommand="UPDATE slon SET mrowka = @MROWKA WHERE (NUMER IN (@NUMERY))" <UpdateParameters><asp:Parameter Name="MROWKA" /><asp:Parameter Name="NUMERY" /></UpdateParameters> And because of @numery i have err: Error converting data type nvarchar to numeric. how should i post "123, 65465, 54616, 56465" as parameter for this query ?
Hello, is it possible to pass a variable into a trigger and update the trigger by doing so? I tried the trigger below but i get an error message saying '@current_trigger_item must be declared'. I was hoping to use @current_trigger_item to hold an item passed to it(like a regular procedure) by updating the trigger when i wanted to change the variable. Hope that make sense.
CREATE TRIGGER low_item (@current_trigger_item VARCHAR(15))on stock FOR INSERT AS
BEGIN declare @price money declare @item_id int declare @item varchar(15)
select @price = price from inserted select @item_id = item_id from inserted select @item = item from inserted
If ( @price < (select min(price) from stock where ((item_id <>@item_id) AND (@item = @current_trigger_item) ) ) )
I have a formview with name, email, and password. I bind all fields to sql except the password which is blank. In my sqldatasource, I define parameters for name, email and id: UpdateCommand="UPDATE UserProfile SET Name = @Name,Email = @Email WHERE (ID = @ID)"><UpdateParameters><asp:Parameter Name="Name" /><asp:Parameter Name="Email" /><asp:Parameter Name="ID" /></UpdateParameters> In code I want to add a password parameter if there is value in the password field otherwise I don't want the password field updated. If I add define a password parameter like above then if a user left the password field blank then their new is blank. That's way I think adding it dynamically is the way. But I am having problems with the code to add the parameter in sqldatasource_updating event. Protected Sub SqlProfile_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles SqlProfile.UpdatingDim password As TextBox = FormView1.FindControl Protected Sub SqlProfile_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles SqlProfile.Updating Dim password As TextBox = FormView1.FindControl("tb_password1") If Not password.Text.ToString & "" = "" Then SqlProfile.UpdateParameters.Add(New Parameter("@Password", TypeCode.String, password.Text.ToString)) End If
I need to update an Oracle table from SQL Server. I am trying to use Openquery Update statement. I need to pass a integer as a parameter. I will be updating a date field and a status field.
This is the gist of what I need to do in a stored procedure
DECLARE @ID1 INT, @SQL1 VARCHAR(8000), @STATUS VARCHAR(10), @DATE DATETIME; SET @ID1 = 350719; SET @STATUS = 'COMPLETED'; SET @DATE = GETDATE(); SELECT @ID1; SELECT @SQL1 = 'UPDATE OPENQUERY(NGDEV2_LINK2, ''select DM_IMPORT_STATUS, DM_IMPORT_DATE FROM NEXTGEN.PARTY_HISTORY WHERE PARTY_HISTORY_ID = ' + CAST(@ID1 as nvarchar(30)) + ''')' SET DM_IMPORT__STATUS = @STATUS, DM_IMPORT_DATE = @DATE; EXEC (@SQL1);
When I make a call to a stored procedure to update a record, the update does not happen. No error is thrown, there are just no rows updated. When I look at SQL Server Profiler, this is what I see: exec TTN_Update_RecurringIssueVehicle @RecurringIssueVehicleID='00962233-6EC3-42CE-ABBD-1851F1176D63',@RecurringIssueID='66FE821A-9881-4368-B975-5B04975C5E16',@RecurringIssueProblemID='ABED20CD-CB37-4491-903F-553555EEE47C',@MarketID=1,@VehicleNumber=268,@AddedDate=N'12/14/2006 3:30:00 PM',@AddedBy=12,@ResolvedDate=N'12/15/2006 10:19:45 AM',@ResolvedBy=12
It seems to be putting a carriage return in the middle of one of my date parameter values, and also seems to be putting those values in double quotes. If I try to run this in SQL Management Studio, it throws an error. If I take out the carriage return, and fix the quotes, it succeeds. Here is my VB.Net code:
<DataObjectMethod(DataObjectMethodType.Update)> _ Public Function Update_RecurringIssueVehicle( _ ByVal RecurringIssueVehicleID As Guid, _ ByVal RecurringIssueID As Guid, _ ByVal RecurringIssueProblemID As Guid, _ ByVal MarketID As Integer, _ ByVal VehicleNumber As Integer, _ ByVal AddedDate As DateTime, _ ByVal AddedBy As Integer, _ ByVal ResolvedDate As DateTime, _ ByVal ResolvedBy As Integer) As Integer dbCmd.CommandText = "TTN_Update_RecurringIssueVehicle" dbCmd.Parameters.Clear() dbCmd.Parameters.AddWithValue("@RecurringIssueVehicleID", RecurringIssueVehicleID) dbCmd.Parameters.AddWithValue("@RecurringIssueID", RecurringIssueID) If RecurringIssueProblemID <> Guid.Empty Then dbCmd.Parameters.AddWithValue("@RecurringIssueProblemID", RecurringIssueProblemID) dbCmd.Parameters.AddWithValue("@MarketID", MarketID) dbCmd.Parameters.AddWithValue("@VehicleNumber", VehicleNumber) dbCmd.Parameters.AddWithValue("@AddedDate", AddedDate.ToString()) dbCmd.Parameters.AddWithValue("@AddedBy", AddedBy) If ResolvedDate <> DateTime.MinValue Then dbCmd.Parameters.AddWithValue("@ResolvedDate", ResolvedDate.ToString()) If ResolvedBy <> -1 Then dbCmd.Parameters.AddWithValue("@ResolvedBy", ResolvedBy) Dim retVal As New SqlParameter("@RetVal", SqlDbType.Int) retVal.Direction = ParameterDirection.ReturnValue dbConn.Open() dbCmd.ExecuteNonQuery() dbConn.Close() Return CInt(retVal.Value) End Function
Hi all: I have a list of items (actually a relation in which a user has selected an item, along with a rating for the item) in an Access database table, connected to my app with a SqlDataSource and bound to a repeater. The repeater displays the items to the user along with a dropdown box to show the rating, and allow the user to update it. The page connects and displays correctly. My problem is that when the user submits the page and I iterate through the repeater items to update each rating, the updates are not being completed in the database. The update works if I hard-code a value for the rating into the query itself, but not when using an updateparameter (pTaskRating below). In other words if I replace pTaskRating with '5', all the correct records will be found and have their ratings updated to 5. That means that the mySurveyId and pTaskId(DefaultValue) parameters have to be working, because the right records are found, but I can't seem to update records based on the DefaultValue of the pTaskRating parameter, even though I can verify that the DefaultValue is correct by placing a watch on it. It seems that my problem must be in my use of that particular parameter in the query, either in properties of the parameter or in the value assigned to it. I am extremely frustrated - any ideas would be greatly, greatly appreciated. Thanks! Bruck The table I'm pulling from and updating looks like this: SURVEY_ID (Text 50), TASK_ID (Long Int), RATING_ID (Long Int) Here's my ASPX for the main data source: <asp:SqlDataSource ID="sqlTaskSelections" runat="server" ConnectionString='Provider=Microsoft.Jet.OLEDB.4.0;Data Source="abc.mdb";Persist Security Info=True;Jet OLEDB:Database Password=xyz' ProviderName="System.Data.OleDb" SelectCommand="SELECT [SURVEY_ID], [TASK_ID], [RATING_ID] FROM [TBL_TASK_SELECTION] WHERE [SURVEY_ID] = mySurveyId" UpdateCommand="UPDATE [TBL_TASK_SELECTION] SET [RATING_ID] = pTaskRating WHERE ([SURVEY_ID] = mySurveyId) AND ([TASK_ID] = pTaskId)"> <UpdateParameters>
<asp:SessionParameter Name="mySurveyId" SessionField="SurveyId" DefaultValue="" /><asp:Parameter Name="pTaskId" DefaultValue="" /><asp:Parameter Name="pTaskRating" DefaultValue="" /> </UpdateParameters> And here's the repeater (the Task ID and Rating are stored in hidden fields for easy access later): <asp:Repeater ID="rptTaskSelections" runat="server">
<FooterTemplate></td></tr></table></FooterTemplate> </asp:Repeater> And here's the page load and submit VB: Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
'BIND / LOAD RATINGS TO DROPDOWN BOXES HEREDim i As IntegerDim cbCurrentRating As DropDownListDim hCurrentRating As HiddenFieldrptTaskSelections.DataSource = sqlTaskSelectionsrptTaskSelections.DataBind()
Hi, I'm trying to update a sqlserver database through vb.net in an asp.net 2.0 project. I'm using a sqldatasource and am trying to code an update parameter with a session variable. code snippet: <UpdateParameters><asp:Parameter Name="hrs_credited" /> <asp:Parameter Name="updater_id" DefaultValue="<%$ Session("User_ID")%>" Type="Int32"/> <asp:Parameter Name="activity_id" /> <asp:Parameter Name="attendee_id" /></UpdateParameters> The error message that I receive is: Error 2 Literal content ('<asp:Parameter Name="updater_id" DefaultValue="" Type="Int32"/>') is not allowed within a 'System.Web.UI.WebControls.ParameterCollection'. C:DevelopmentCMEdataentryattendance.aspx 29 Does anyone have an idea how to assign the session var value to the parameter? Thanks!
I'm getting a type mismatch error (currently string, when I think I need Int32 ?) with the code below. I'm having difficultly setting my session variable to type Int32 and having it take up the value of RawCoDeptRowID. When I "Watch" it, it's value remains as "snCoDeptRowID". Also, not sure if my Update command and it's snCoDeptRowID input parameter is well formed? Any advice would be greatly appreciated. Thank you. Web Page 1: Session["snCoDeptRowID"] = Convert.ToInt32 (RawCoDeptRowID);
Dear All - iam facing a problem for passing a parameter to update paradox table statment in the OLE DB Command
Briefly an OLE DB Command exist between OLE DB Source and OLE DB destination , all i want it to send the data that flow from the OLE DB Source to the update paradox table statment in OLE DB Command ,
i use the parameter annotation which is "?" to refer to the parameter in the update where clause and it sucess when i use the OLE DB Command to connect to SQL Server DB but when i use it with the Paradox Table an error appear saying that there is more than one data source column with the name "?" The data source column names must be unique.
i dont know what that means is it means that "?" it consider "?" as a column or what or is there another way to send parameter to Update statment for the paradox table differ from the SQL Server Update statment which is the "? "
i hope someone help me as soon as possible because i need it in work sOOon Thanks, Maylo
I am attempting to update a sql db using the update and parameter code in VB.net 2003 through MSDE for a web application. It updates changed data OK, but if the textbox value is deleted, the code does not update the sql db. I am new to this, and I'm sure it is something simple. Here is some sample code.
With cmdCategoriesUpdate .Parameters("@Field1Tag").Value = txtFld1.Text .Parameters("@Field2Tag").Value = txtFld2.Text End With cmdCategoriesUpdate.ExecuteNonQuery() SqlConnection1.Close()
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
I hope to update a DateTime column value with a Time input parameter. Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE] @QuePoolID int=null ,@ApptTime time(7) ,@SendOnDate datetime
Hello, since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON SET QUOTED_IDENTIFIER ON CREATE PROCEDURE [schema].[spCreateReportTest] @Name nvarchar(20)= ''
AS BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON set @slqSelectQuery = N'SELECT field1,field2,field3 from table' if (@Name <> '') begin set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + '''' end EXEC sp_executesql @slqSelectQuery end
Inside my business Intelligence Project I created: -the shared data source with the connection String - a data set : CommandType = Stored Procedure Query String = schema.spCreateReportTest When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter... So inside"Layout" tab, I added the parameter: Name allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1 available values: from query default values: non query (specify a value "<None>") Parameter 2 available values: Non query (no value specified) default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
I have parameters in my report. The user can choose the year, month and date (3 parameters). Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension . Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007". But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All". Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you can not select null in multivalue parameter.How can i do it. i am using share point list.
Does anyone know if this is possible right out of the box in SSRS 2005 against an OLAP data source?
I have several parameters. My second parameter is to be filtered based on the first parameter (kinda like cascading), but how do I do this against an OLAP data source? Lets say I have param1 and param2 in a dataset. I want Param2 to show the locations only based on what I select in Param1. Same but a little different: I have Parameter1 and then my second parameter (Param2) is a boolean (True/False). I want to show Parameter 3/Paramater 4 based on selection of Param2 (So, if true, show Param3, if false, show Param 4) and remember we are doing this in a sequence. Can you do this thru SSRS? Any help would be great. Thanks for your time in advance. Kent
Is it possible to fill a parameter list with values based on another parameter value? Here's what I have so far (which hasn't worked)... I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school. I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table). I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school. Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up... The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'. The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid. ...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter? Any help you can give me would be great!! Thank you
I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature available in any other updated version of ssrs?
I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
I want to set the default parameters for a function. I;d like to set the date start date to current date and end date for the last 90 days. how to make this work?
Create Function HR.Equipment ( @startdate Date =(Convert(Date,DATEADD(DAY,-1,GETDATE())), @enddate Date = (Convert(Date,@StartDate-90) ) RETURNS TABLE AS RETURN ( SELECT EquipID, EmpName, IssueDate FROM HR.Equipment WHERE IssueDate <=@StartDate and IssueDate >=@EndDate ) GO
