Hi
I need to update one of the test databases:
There are about 140 tables which don€™t get used but I don't want to delete to I want to prefix them with 'x'.
Is this possible or do I have to alter each one, one at a time
Thanks
Rich
Hi there. I haven't been able to figure out how to join a table on column on multiple table names. Here's the situation:
I have a table "tblJob" with a key of jobID. Now for every jobID, the program creates a new table that keeps track of the stock before the jobId was processed and after it was processed to give accurate stock levels and show the difference in stock levels. So, a jobID of 355 would be related to the table: "tblPreStock_335" and "tblPostStock_335". These 2 tables have all the materials in stock and the quantity. Therefore they show how much material was used. I need to figure out the difference in the material in the stock before and after the processing.
That means that I have to get a stockID, get the associated pre and post tables, and then display the difference of ALL the materials in the pre and post tables.
Could someone help me get started on the right path? Even a link to similiar problem that I haven't found would be nice.
Thx
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
I'm trying to update a checkbox from "False" to "True" within a single table for multiple records. I can update a single record using the script below. However, I'm having trouble applying additional Id's to the string.
(Works) - Update Name_Demo set KEY_CONTACT = 'true' where ID = 225249
(doesn't work) - Update Name_Demo set KEY_CONTACT = 'true' where ID = '225249, 210014, 216543'
It says query executes successfully but returned no rows.
Hello All
I am trying to figure out if what i am attempting to do is possible and whether or not my approach is wrong to begin with.
I am trying to build a custom report for our accounting system which is Traverse from Open systems. This is what i have done in the stored procedure thus far
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER PROCEDURE rptArFLSalesByCustItemized_sp
@custId pCustID,
@dateFrom datetime,
@dateThru datetime,
@itemIdFrom pItemId,
@itemIdThru pItemId
as
set nocount on
-- define some variables for previous year
declare @LYqty int, @LyAmt money, @LYfrom datetime, @LYthru datetime
-- set defaults
SET @itemIdFrom=ISNULL(@itemIdFrom,(SELECT MIN(itemId) FROM tblInItem))
SET @itemIdThru=ISNULL(@itemIdThru,(SELECT MAX(itemId) FROM tblInItem))
SET @LYfrom=DATEADD(YEAR,-1,@dateFrom)
SET @LYthru=DATEADD(YEAR, -1, @dateThru)
-- create small temp table to hold customer info
Create Table #tmpArCustInfo
(
custId pCustID,
custName VARCHAR (30),
)
-- populate customer temp table with info
Insert into #tmpArCustInfo
select custId, custName
from tblArCust
WHERE custId = @custId
-- create a temp table to hold the Data for each Item
Create Table #tmpArSalesItemized
(
itemId pItemId,
productLine VARCHAR (12),
pLineDesc VARCHAR (35),
descr VARCHAR (35),
LYQtySold int,
LYTDQtySold int,
QtySold int,
LYTDsales money,
totalSales money,
LastInvDate datetime,
)
-- populate the temp table with all of the inventory items
insert into #tmpArSalesItemized
select ii.itemId, ii.productLine, ip.Descr, ii.Descr, 0,0,0,0,0, NULL
from tblInItem ii, tblInProductLine ip
where ip.productLine = ii.productLine
AND ii.itemId BETWEEN @itemIdFrom AND @itemIdThru
-- update table with this years quantities
update #tmpArSalesItemized
SET QtySold = (select SUM(QtyOrdSell) from tblArHistDetail hd
where TransId IN (select TransId from tblArHistHeader where custId = @custId)
AND orderDate IN (select OrderDate from tblArHistHeader where OrderDate BETWEEN @dateFrom AND @dateThru)
AND hd.partId BETWEEN @itemIdFrom AND @itemIdThru
GROUP BY hd.partId
)
-- Return the temp tables results
select * from #tmpArSalesItemized, #tmpArCustInfo
drop table #tmpArSalesItemized, #tmpArCustInfo
return
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
My problems begin where i want to start updating all of the Qty's of the QtySold field. I have managed to get it to write the same sum in every field but i cannot figure out how to update each row based on the sum of the qty found for that item in the tblArHistDetails table, trouble is too that there is no reference to the custId in that table either. The custId resides in tblArHistHeader and is linked to the details table via the TransId column. So really i need to update many rows based on criteria from 2 other tables.
Can anyone please help? I dont have a clue how to make this work, and most of what i have learned about sql thus far has been from opening other stored procs etc in the accounting system and just reading to see how the developers have done things.
Thanks
Jamie
Hi Guys
I have 4 databases in the same space.My users use all of them and use the same username and password to log into these 4 databases.In each of these databases,i have put a control table to allow me to keep track of all users that have to reset their passwords.
The control table consists of the username and flag fields.When the flag is ON(1) the user is forced to reset thier password and if the flag is OFF(0) they are not.
When a user logs into any one of these databases and they have to reset thier password,how do i make sure that all the other tables in other databases are also updated to make sure that the user is not forced to reset their password again when they log into those other databases later since they are using the same username and password for all databases.
I am planning to use a stored procedure which i will put into all the four databases and when a user logs in and has to reset their password,that sproc is called and automatically updates all the other 3 tables in other 3 databases.
Some SQL examples will be very appreciated.
Thanks.
Hi,
i have a scenario where I have to read 2 files that update the same table (a temp staging table)...this comes from the source system's limitation on the amount of columns that it can export. What we have done as a workaround is we split the data into 2 files where the 2nd file would contain the first file's primary key so we can know on which record to do an update...
Here is my problem...
The table that needs to be updated contains 9 columns. File one contains 5 of them and file2 contains 4 of them.
File 1 inserts 100 rows and leaves the other 4 columns as nulls and ready for file 2 to do an update into them.
File 2 inserts 10 rows but fails on 90 rows due to incorrect data.
Thus only 10 rows are successfully updated and ready to be processed but 90 are incorrect. I want to still do processing on the existing 10 but cant affort to try and do processing on the broken ones...
The easy solution would be to remove the incorrect rows from the temp table when ever an error occurs on the 2nd file's package by running a sql query on the table using the primary keys that exist in both files but when the error occurs on the Flat File source, I can't get the primary key.
What would be the best suggestion? Should i rather fail the whole package if 1 row bombs out? I cant put any logic in the following package that does the master file update/insert from the temp table because of the nature of the date. I
Regards
Mike
I am trying to multiple update records in Table B from a single record in Table A. To identify the records that need to be updated I used this:
Select
Table1.cfirstnameas'Table
1 First',Table1.clastnameas'Table
1 Last',Table1.ifamilyid,CR.icontactid,CR.lLiveswithStudent,
Table2.cfirstnameas'Table
2 First',Table2.cLastNameas'Table
2 Last',Table2.ilocationidas'Table
2 Location',Table1.iLocationIDas'Table
1 Location'
fromTable1
JoinTable3
CRonTable1.istudentid=CR.istudentid
JoinTable2
onCR.icontactid=Table2.iContactID
whereCR.lLivesWithStudent=1
andTable1.ifamilyid>0
andTable1.ilocationid<>Table2.iLocationIDandTable1.lCurrent=1
I need to update the ilocationid from Table 1 to all Table 2 records related to Table 1but there is no direct relation from Table 1 to Table 2. I needed Table 3 to make the connection from Table 1 to 2.
I am designing a package to export staging tables into a flat file.The names of the tables will be: TableAStaging_YYYYMM and TableBStaging_YYYYMM. As you can see the names of the tables will be changing each month.
The flat files will have similar naming: C:MyPathFlatFileTableAStaging__YYYYMM and C:MyPathFlatFileTableAStaging__YYYYMM.I want to run the package as an sql job in two steps, one for each table.I need to dynamically pass the table names and file names (together with the path) to the IS package.
Hi
I was wondering if anyone has an idea of how we could find the table names and column names of the tables in our Sql server database at runtime/dynamically given our connection string? Please let me know.
Thanks.
is there a way to update multiple rows in one update query in tsql? what I wanted to do is for example I got a table containing
code : desc
1 : a
2 : b
3 : c
4 : d
1 : e
3 : f
I wanted to update it to
code : desc
1 : x
2 : b
3 : y
4 : d
1 : x
3 : y
how to do it?
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Any suggestions?
I'm trying to do an update query that looks like this:
UPDATE
PAEMPLOYEE
SET PAEMPLOYEE.LOCAT_CODE = EMPLOYEE.PROCESS_LEVEL
FROM
PAEMPLOYEE A
JOIN EMPLOYEE B ON A.EMPLOYEE = B.EMPLOYEE
It's erroring out on the Employee prefix B.EMPLOYEE saying:
..."does not match with a table name or alias name used in the query"
Is it wrong or will it cause problems to have a field name the same as the table name?
I have several 64 bit SQL 2005 servers that up to 4 named instances residing on them. Before going into production I need to change the port addressing to use fixed TCP ports. I have SQL Browser running to enbale me to see the named instances.
What steps are required to change to using specific TCP port addresses and is there a particular range to use ?
Hello,I read Data Tutorials from this site. here in DAL Different TableAdapters are created for different purpose. I want to know when I want to update More then one table at a time then I have to fire Update Query from more than one Table Adapter. now how to maintain Consistancy? what if one adapter is successed and other fails to update tables in my database ? How to solve this problem???
View 3 Replies View RelatedHow would I update a table where id = a list of ids?Do I need to parse the string idList? I am being passed a comma seperated string of int values from a flex application.example: 1,4,7,8 Any help much appreciatedBarry 1 [WebMethod]
2 public int updateFirstName(String toUpdate, String idList)
3 {
4 SqlConnection con = new SqlConnection(connString);
5
6 try
7 {
8 con.Open();
9 SqlCommand cmd = new SqlCommand();
10 cmd.Connection = con;
11 cmd.CommandText = "UPDATE tb_staff SET firstName = @firstName, WHERE id = @listOfIDs";
12
13
14
15 SqlParameter firstName = new SqlParameter("@firstName", toUpdate);
16 SqlParameter listOfIDs= new SqlParameter("@listOfIDs", idList);
17
18
19
20 cmd.Parameters.Add(firstName);
21 cmd.Parameters.Add(listOfIDs);
22
23 int i = cmd.ExecuteNonQuery();
24 con.Close();
25 return 1;
26
27 }
28 catch
29 {
30 return 0;
31 }
32 }
33
34
I have a problem like this. I have an application which shud be internet hosted. All transactions should be updated to the central server of the net as well as an intranet DB server. (I'll have a DB server - SQL Server 2000 in each intranet). Is this possible.. i'm planning to use ASP to develop the net based application.
Thank you in advance..
Geetha R
Hi,
I'm trying to update a table with a value that is dependent on another table.
Scenario
Table 1 has 2 fields: FieldID, FieldA
Table 2 links each Table 1 row to a specific row in Table 3 using FieldID
Table 3 has 2 fields: FieldID, FieldA
I need to update Table1.FieldA to equal the value in Table3.FieldA in the appropriate row.
I was attempting this along the lines of:
UPDATE Table1
SET Table1.FieldA=
(
SELECT DISTINCT Table3.FieldA FROM Table1, Table2, Table3
WHERE Table1.FieldID=Table2.Table1ID
AND Table2.Table3ID=Table3.FieldID
)
However, I realised that the select query would not know which Table3 row to look at.
I hope that makes sense and if someone can help me urgently I would be most appreciative!
Ian
I have a large table with many columns that have rows with N/A or null values, which are gotten from a bulk insert.
In order to format the data properly, we need to convert the data from N/A or null to 0, as the original values come from the supplier.
In my code the best way to achieve this is running multiple queries as
update csv_testing set testing5 = 0 where testing5 like'%N/A%'
update csv_testing set testing6 = 0 where testing6 like'%N/A%'
update csv_testing set testing7 = 0 where testing7 like'%N/A%'
update csv_testing set testing9 = 0 where testing9 like'%N/A%'
etc for about 12 columns
is there a better way of doing this ?
Hi guys.........i'm tryign to update 2 tables in one stored procedure. However i'm getting errors. heres the code i have:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[snow_ors_additionalInfoUpdate]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[snow_ors_additionalInfoUpdate]
GO
CREATE PROCEDURE dbo.snow_ors_additionalInfoUpdate
@Reference int,
@CanTravel int,
@SEEmployee varchar(100),
@SE_EMPLOYEE_FROM datetime,
@SE_EMPLOYEE_TO datetime,
@WorkHours Varchar(100),
@DrivingLicence varchar(100),
@CriminalConvictions bit,
@CriminalConvictionsDetails1 text,
@CriminalConvictionsDate1 datetime,
@CriminalConvictionsDetails2 text,
@CriminalConvictionsDate2 datetime,
@CriminalConvictionsDetails3 text,
@CriminalConvictionsDate3 datetime,
@VacancyMonitoring Varchar(100),
@VacancyMonitoringDetails Varchar(50),
AS
UPDATE Account
SET CanTravel= @CanTravel,
SEEmployee = @SEEmployee,
WorkHours= @WorkHours,
DrivingLicence = @DrivingLicence,
CriminalConvictions = @CriminalConvictions,
CriminalConvictionsDetails1 = @CriminalConvictionsDetails1,
CriminalConvictionsDate1 = @CriminalConvictionsDate1,
CriminalConvictionsDetails2 = @CriminalConvictionsDetails2,
CriminalConvictionsDate2 = @CriminalConvictionsDate2,
CriminalConvictionsDetails3 = @CriminalConvictionsDetails3,
CriminalConvictionsDate3 = @CriminalConvictionsDate3
WHERE Account.Reference = @Reference
UPDATE Application
SETVacancyMonitoring = @VacancyMonitoring,
VacancyMonitoringDetails = @VacancyMonitoringDetails,
WHERE Application.Reference = @Reference
GO
and here are the errors i'm getting:
Server: Msg 156, Level 15, State 1, Procedure snow_ors_additionalInfoUpdate, Line 19
Incorrect syntax near the keyword 'AS'.
Server: Msg 156, Level 15, State 1, Procedure snow_ors_additionalInfoUpdate, Line 37
Incorrect syntax near the keyword 'WHERE'.
thanks again guys!
Hi,New to writing sql scriptI get this error in my sql scriptServer: Msg 512, Level 16, State 1, Line 1Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.The statement has been terminated.I want to write a single sql script which will update column 1 (FK)in table A with column 1 (PK) in table BHere's an example of what I need to doTable DATA_A-------------column C1 (Foreign Key)111111222222333333334455Table DATA_B------------column C1 (Primary Key) Column C2 Column C311 ABC NULL12 ABC 2004-12-1222 EFG NULL23 EFG 2003-12-1233 HIJ NULL34 HIJ 2003-12-1244 KLM 2005-02-0255 JJJ NULLI need to update Table DATA_A set column C1 with 11 data to point toTable DATA_B column C1 with 12 data. Currently, the problem is theTable DATA_A Column C1 is pointing to the wrong primary key which hasNULL data in COLUMN C3. I need to point to the correct Primary Key withDate filled in Column 3. The two primary key is tied together bycolumn C3.Here's my SQl scriptUPDATE DATA_A SET C1 =(SELECT C1 FROM DATA_BWHERE C2 in(SELECT B1.C2 FROM DATA_B B1WHERE EXISTS(SELECT * FROM TABLE_B B2 WHERE B2.C3 is NOT NULL)AND EXISTS(SELECT * from TABLE_B B2 WHERE B2.C3 is NULL)AND B2.C2 = B1.C2GROUP BY B1.C2HAVING COUNT(B1.C2) = 2)AND C3 IS NOT NULL)WHERE(SELECT C1 FROM DATA_BWHERE C2 in(SELECT B1.C2 FROM DATA_B B1WHERE EXISTS(SELECT * FROM TABLE_B B2 WHERE B2.C3 is NOT NULL)AND EXISTS(SELECT * from TABLE_B B2 WHERE B2.C3 is NULL)AND B2.C2 = B1.C2GROUP BY B1.C2HAVING COUNT(B1.C2) = 2)AND C3 IS NULL)Thanks - Been struggle at this for a whileMLR
View 1 Replies View RelatedHow can I update each record in a table, based on a value in another tablewith a single SQL statement?For example, suppose I have the following two tables:Table1Name Something Color-----------------------------------------John GHAS BlueJohn DDSS BlueJohn EESS BluePaul xxxx RedRingo HJKS RedRingo FFFS RedSara hjkd PurpleSara TTHE PurpleJimi sdkjls GreenTable2Name Color------------------------John ?Paul ?Ringo ?Sara ?Jimi ?How can I update the color field in table 2 to correspond with the colorfield in table1 (so I can normalize the db and delete the color field fromtable1)?I know I could open table2 and loop through within my app; just wonderingabout a single SQL statement that would do it. I need a similar technique inother places as part of my app.Thanks,Calan
View 5 Replies View Related
we have some tables in a many-to-many relationship. when data is changed in a row in one table, simultaneous changes are also made to a second table. this may not be the best way to do what we are doing, but it's the way it is today. if we were to use merge replication with column-level tracking and a conflict occurs in a column in either table, we want the row for both tables to be including in the conflict and resolved together. we don't want the row for a table that no conflict occured to be updated while the other row in the other table where the conflict did occur to not be updated. is there a way to wrap two updates to two tables in a transaction? or link them together in a single "conflict resolution transaction"? i don't see any online documentation referencing this scenario. if there is documentation on this, i would appreciate a pointer to it.
thanks,
bryan
I have a really simple query I'm trying to execute. I want to replace all instances of int X (8) in Column A (LastActivityID) with int Y (27) but the following SQL returns the said error. I understand the error, but not sure how to script the SQL differently to get the intended result. Thanks in advance.
Code Block
UPDATE Item SET LastActivityID = 27 WHERE LastActivityID = 8
Error: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
OK, I am trying to update a particular column with a numerical number. Here is the query I am using.
UPDATE viewerblock SET dummycat = (?) WHERE dummyproduct = 0
I am trying to number dummycat row to a certain number for example
dummycat-----------------dummyproduct
1--------------------------0
2--------------------------0
3--------------------------0
4--------------------------0
5--------------------------0
6--------------------------0
do you see what i am trying to do? I am simply trying to number the dummycat column where ever dummyproduct = 0.
is this possible to do?
I need to update a empty column in our SQL database with the login ID for employees of our company.The table is called SY01200 and were I need to put the login ID is column INET5, and the login ID is just me stripping off the company's email address(removing the @company.com), and I need to update the INET5 column only where Master_Type = 'EMP'
And here is the Query that I am using to strip the email select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp'And here is what I thought the Query would be to update however I got and error saying more than 1 arguement returned
UPDATE sy01200
SET INET5 = (select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp')
WHERE Master_Type = 'EMP'
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
Dear all,I need to update one field in a table for a given record and visit number.Example below is how the table looks -SID VISIT DLCO101 0 12101 1 16102 0 18102 2 10103 1 12103 2 14Here is how I would like it to look. The changes are the starred items.SID VISIT DLCO101 0 14*101 1 16102 0 18102 2 16*103 1 12*103 2 14I know it is an UPDATE statement, but I am not sure how to use it when Ineed to update more than one record.Thanks for the help in advance.Jeff
View 3 Replies View RelatedHi all..
First of all Thanks for all the help, I received over the years from MSDN..
Here is my new problem...
I have a SQL table like following table..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
12/31/2049
Now here is what I want to do€¦
1> Sort the table based on Start Date (the picture shown is already sorted..) for example first 6 rows for AK - Anchorage
2> select the rows with same city (rows 1-6)
3> Select the rows with distinct start date (rows 1-3-5)
4> Change the End Date of the second selected row (row 3 in this case) to I day below the start date of 1 selected row. (4/1/2007 €“ 1 day = 3/31/2007)
5> proceed till end of selected rows.. 1-3-5
6> do the same thing for rows 2 and 4.
7> follow the same procedure for rest of the file.
The selected file should look like this when done..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
9/30/2006
Is there way to do this in SSIS? any recommened appprach>?
Any help with this is highly appreciated..
Thank You..
I have multiple excel Files  each has one sheet (With same column names) need to be loaded in a single table. I tried For each loop but couldn't succeed. Â
As I am new to SSIS. How to configure For each loop container for this...
Hi,
I'm using ASP with a JScript variant and MSSQL Server 2000. I would like to write a script that basically erases all data except for a few things.
Is there a way to update multiple tables at once without having to write lines and lines of code? I tried UPDATE tbl1,tbl2 SET uid='asc', but to no avail. It gave me a syntax error. My thinking behind it is something like... UPDATE dbo.* SET uid='mferguson' and after that I can delete stuff like DELETE dbo.*... Any ideas?
I know the above is ASP, I've tried this thread in the ASP forum with no avail... they referred me to this forum.
I'm using a stored proceedure which should update a number of rows in atable depending on a key value supplied (in this case 'JobID'). Butwhat's happening is when I call the proc from within the program, onlyone row gets updated.SoWhen I call the proc from Query Analyser, all rows get updated.When I call the proc from within the program, only one row gets updatedAny ideas as to why this is happening??JobID Description Price Status----------------------------------------------73412 Documents:Item 3 .00 073412 Documents:Item 5 .00 073412 Documents:Item 2 .00 073412 Documents:Item 4 .00 073412 Documents:Item 1 .00 0^^^^Only one record gets updated, so the table ends up being...JobID Description Price Status----------------------------------------------73412 Documents:Item 3 .00 473412 Documents:Item 5 .00 073412 Documents:Item 2 .00 073412 Documents:Item 4 .00 073412 Documents:Item 1 .00 0Public Sub UpdateAllItems() As BooleanDim objCnn As ADODB.ConnectionDim objCmd As ADODB.CommandSet objCnn = New ADODB.ConnectionWith objCnn.ConnectionString = cnConn.CursorLocation = adUseClient.OpenEnd WithSet objCmd = New ADODB.CommandSet objCmd.ActiveConnection = objCnnWith objCmd.CommandText = "sp_UpdateJobItem".CommandType = adCmdStoredProc.Parameters.Append .CreateParameter("@Status", adInteger,adParamInput, 4, Me.Status).Parameters.Append .CreateParameter("@JobID", adInteger,adParamInput, 4, Me.iJobID).ExecuteEnd WithSet objCnn = NothingSet objCmd = NothingEnd Sub-----------------------------------------------------------------SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOALTER PROCEDURE dbo.sp_UpdateJobItem@JobID As int, @Status As intAS--================================================== ===========================================SET XACT_ABORT OFF -- Allow procedure to continue aftererrorDECLARE @error integer -- Local variable to capture theerror OnHoldAction.--================================================== ===========================================BEGIN TRANSACTIONUPDATE tbl_JobItemsSET Status = @statusWHERE JobID = @JobID--================================================== ===========================================-- Check for errors--================================================== ===========================================SELECT @error = @ERRORIf @error > 0BEGINROLLBACK TRANSACTIONENDElseBEGINCOMMIT TRANSACTIONENDGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
View 13 Replies View RelatedHello,
Maybe anyone have done that before?
I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables.
i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.
I made such SSIS package. set ole db source data access mode to table or view name variable.
set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables)
but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.
how to solve that problem?