Hello,
I read Data Tutorials from this site. here in DAL Different TableAdapters are created for different purpose. I want to know when I want to update More then one table at a time then I have to fire Update Query from more than one Table Adapter. now how to maintain Consistancy? what if one adapter is successed and other fails to update tables in my database ?
How to solve this problem???
Hi,
I'm trying to update a table with a value that is dependent on another table.
Scenario
Table 1 has 2 fields: FieldID, FieldA
Table 2 links each Table 1 row to a specific row in Table 3 using FieldID
Table 3 has 2 fields: FieldID, FieldA
I need to update Table1.FieldA to equal the value in Table3.FieldA in the appropriate row.
I was attempting this along the lines of:
UPDATE Table1
SET Table1.FieldA=
(
SELECT DISTINCT Table3.FieldA FROM Table1, Table2, Table3
WHERE Table1.FieldID=Table2.Table1ID
AND Table2.Table3ID=Table3.FieldID
)
However, I realised that the select query would not know which Table3 row to look at.
I hope that makes sense and if someone can help me urgently I would be most appreciative!
Ian
we have some tables in a many-to-many relationship. when data is changed in a row in one table, simultaneous changes are also made to a second table. this may not be the best way to do what we are doing, but it's the way it is today. if we were to use merge replication with column-level tracking and a conflict occurs in a column in either table, we want the row for both tables to be including in the conflict and resolved together. we don't want the row for a table that no conflict occured to be updated while the other row in the other table where the conflict did occur to not be updated. is there a way to wrap two updates to two tables in a transaction? or link them together in a single "conflict resolution transaction"? i don't see any online documentation referencing this scenario. if there is documentation on this, i would appreciate a pointer to it.
thanks,
bryan
Hi,
I'm using ASP with a JScript variant and MSSQL Server 2000. I would like to write a script that basically erases all data except for a few things.
Is there a way to update multiple tables at once without having to write lines and lines of code? I tried UPDATE tbl1,tbl2 SET uid='asc', but to no avail. It gave me a syntax error. My thinking behind it is something like... UPDATE dbo.* SET uid='mferguson' and after that I can delete stuff like DELETE dbo.*... Any ideas?
I know the above is ASP, I've tried this thread in the ASP forum with no avail... they referred me to this forum.
Is there any way to update multiple tables in a single query. I know we can write triggers. Apart from triggers, is there any other way available in SQL Server. I am using 2008R2.
View 8 Replies View RelatedHi All,
My database's design is set out here. In summary, I'm trying to model a Stock Exchange for a Technical Analysis application written using Visual C++. In order to create the hierachy I'm using a Nested Set Model. I'm now trying to write code to add and delete equities (or, more generically, nodes) to the database using a form presented to the user in my application. I have example SQL code to create the necessary add and delete procedures that calculate the changes to the values in the lft and rgt columns, but these examples focus around a single table, where as my design aggregates rows from multiple tables using UNION ALL:
Code Snippet
CREATE VIEW vw_NSM_DBHierarchy -- Nested Set Model Database Hierarchy
AS
SELECT clmStockExchange, clmLeft, clmRight FROM tblStockExchange_
UNION ALL
SELECT clmMarkets, clmLeft, clmRight FROM tblMarkets_
UNION ALL
SELECT clmSectors, clmLeft, clmRight FROM tblSectors_
UNION ALL
SELECT clmEPIC, clmLeft, clmRight FROM tblEquities_
Essentially, I'm trying to create an updateable view but I receive the error "UNION ALL View is not updatable because a partitioning column was not found". I suspect that my design in wrong or lacks and this problem is highlighting the design flaws so any suggestions would be greatly appreciated.
Hi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
is there a way to update multiple rows in one update query in tsql? what I wanted to do is for example I got a table containing
code : desc
1 : a
2 : b
3 : c
4 : d
1 : e
3 : f
I wanted to update it to
code : desc
1 : x
2 : b
3 : y
4 : d
1 : x
3 : y
how to do it?
How would I update a table where id = a list of ids?Do I need to parse the string idList? I am being passed a comma seperated string of int values from a flex application.example: 1,4,7,8 Any help much appreciatedBarry 1 [WebMethod]
2 public int updateFirstName(String toUpdate, String idList)
3 {
4 SqlConnection con = new SqlConnection(connString);
5
6 try
7 {
8 con.Open();
9 SqlCommand cmd = new SqlCommand();
10 cmd.Connection = con;
11 cmd.CommandText = "UPDATE tb_staff SET firstName = @firstName, WHERE id = @listOfIDs";
12
13
14
15 SqlParameter firstName = new SqlParameter("@firstName", toUpdate);
16 SqlParameter listOfIDs= new SqlParameter("@listOfIDs", idList);
17
18
19
20 cmd.Parameters.Add(firstName);
21 cmd.Parameters.Add(listOfIDs);
22
23 int i = cmd.ExecuteNonQuery();
24 con.Close();
25 return 1;
26
27 }
28 catch
29 {
30 return 0;
31 }
32 }
33
34
I have a problem like this. I have an application which shud be internet hosted. All transactions should be updated to the central server of the net as well as an intranet DB server. (I'll have a DB server - SQL Server 2000 in each intranet). Is this possible.. i'm planning to use ASP to develop the net based application.
Thank you in advance..
Geetha R
I have a large table with many columns that have rows with N/A or null values, which are gotten from a bulk insert.
In order to format the data properly, we need to convert the data from N/A or null to 0, as the original values come from the supplier.
In my code the best way to achieve this is running multiple queries as
update csv_testing set testing5 = 0 where testing5 like'%N/A%'
update csv_testing set testing6 = 0 where testing6 like'%N/A%'
update csv_testing set testing7 = 0 where testing7 like'%N/A%'
update csv_testing set testing9 = 0 where testing9 like'%N/A%'
etc for about 12 columns
is there a better way of doing this ?
Hi guys.........i'm tryign to update 2 tables in one stored procedure. However i'm getting errors. heres the code i have:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[snow_ors_additionalInfoUpdate]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[snow_ors_additionalInfoUpdate]
GO
CREATE PROCEDURE dbo.snow_ors_additionalInfoUpdate
@Reference int,
@CanTravel int,
@SEEmployee varchar(100),
@SE_EMPLOYEE_FROM datetime,
@SE_EMPLOYEE_TO datetime,
@WorkHours Varchar(100),
@DrivingLicence varchar(100),
@CriminalConvictions bit,
@CriminalConvictionsDetails1 text,
@CriminalConvictionsDate1 datetime,
@CriminalConvictionsDetails2 text,
@CriminalConvictionsDate2 datetime,
@CriminalConvictionsDetails3 text,
@CriminalConvictionsDate3 datetime,
@VacancyMonitoring Varchar(100),
@VacancyMonitoringDetails Varchar(50),
AS
UPDATE Account
SET CanTravel= @CanTravel,
SEEmployee = @SEEmployee,
WorkHours= @WorkHours,
DrivingLicence = @DrivingLicence,
CriminalConvictions = @CriminalConvictions,
CriminalConvictionsDetails1 = @CriminalConvictionsDetails1,
CriminalConvictionsDate1 = @CriminalConvictionsDate1,
CriminalConvictionsDetails2 = @CriminalConvictionsDetails2,
CriminalConvictionsDate2 = @CriminalConvictionsDate2,
CriminalConvictionsDetails3 = @CriminalConvictionsDetails3,
CriminalConvictionsDate3 = @CriminalConvictionsDate3
WHERE Account.Reference = @Reference
UPDATE Application
SETVacancyMonitoring = @VacancyMonitoring,
VacancyMonitoringDetails = @VacancyMonitoringDetails,
WHERE Application.Reference = @Reference
GO
and here are the errors i'm getting:
Server: Msg 156, Level 15, State 1, Procedure snow_ors_additionalInfoUpdate, Line 19
Incorrect syntax near the keyword 'AS'.
Server: Msg 156, Level 15, State 1, Procedure snow_ors_additionalInfoUpdate, Line 37
Incorrect syntax near the keyword 'WHERE'.
thanks again guys!
Hi,New to writing sql scriptI get this error in my sql scriptServer: Msg 512, Level 16, State 1, Line 1Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.The statement has been terminated.I want to write a single sql script which will update column 1 (FK)in table A with column 1 (PK) in table BHere's an example of what I need to doTable DATA_A-------------column C1 (Foreign Key)111111222222333333334455Table DATA_B------------column C1 (Primary Key) Column C2 Column C311 ABC NULL12 ABC 2004-12-1222 EFG NULL23 EFG 2003-12-1233 HIJ NULL34 HIJ 2003-12-1244 KLM 2005-02-0255 JJJ NULLI need to update Table DATA_A set column C1 with 11 data to point toTable DATA_B column C1 with 12 data. Currently, the problem is theTable DATA_A Column C1 is pointing to the wrong primary key which hasNULL data in COLUMN C3. I need to point to the correct Primary Key withDate filled in Column 3. The two primary key is tied together bycolumn C3.Here's my SQl scriptUPDATE DATA_A SET C1 =(SELECT C1 FROM DATA_BWHERE C2 in(SELECT B1.C2 FROM DATA_B B1WHERE EXISTS(SELECT * FROM TABLE_B B2 WHERE B2.C3 is NOT NULL)AND EXISTS(SELECT * from TABLE_B B2 WHERE B2.C3 is NULL)AND B2.C2 = B1.C2GROUP BY B1.C2HAVING COUNT(B1.C2) = 2)AND C3 IS NOT NULL)WHERE(SELECT C1 FROM DATA_BWHERE C2 in(SELECT B1.C2 FROM DATA_B B1WHERE EXISTS(SELECT * FROM TABLE_B B2 WHERE B2.C3 is NOT NULL)AND EXISTS(SELECT * from TABLE_B B2 WHERE B2.C3 is NULL)AND B2.C2 = B1.C2GROUP BY B1.C2HAVING COUNT(B1.C2) = 2)AND C3 IS NULL)Thanks - Been struggle at this for a whileMLR
View 1 Replies View RelatedHow can I update each record in a table, based on a value in another tablewith a single SQL statement?For example, suppose I have the following two tables:Table1Name Something Color-----------------------------------------John GHAS BlueJohn DDSS BlueJohn EESS BluePaul xxxx RedRingo HJKS RedRingo FFFS RedSara hjkd PurpleSara TTHE PurpleJimi sdkjls GreenTable2Name Color------------------------John ?Paul ?Ringo ?Sara ?Jimi ?How can I update the color field in table 2 to correspond with the colorfield in table1 (so I can normalize the db and delete the color field fromtable1)?I know I could open table2 and loop through within my app; just wonderingabout a single SQL statement that would do it. I need a similar technique inother places as part of my app.Thanks,Calan
View 5 Replies View RelatedI have a really simple query I'm trying to execute. I want to replace all instances of int X (8) in Column A (LastActivityID) with int Y (27) but the following SQL returns the said error. I understand the error, but not sure how to script the SQL differently to get the intended result. Thanks in advance.
Code Block
UPDATE Item SET LastActivityID = 27 WHERE LastActivityID = 8
Error: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
OK, I am trying to update a particular column with a numerical number. Here is the query I am using.
UPDATE viewerblock SET dummycat = (?) WHERE dummyproduct = 0
I am trying to number dummycat row to a certain number for example
dummycat-----------------dummyproduct
1--------------------------0
2--------------------------0
3--------------------------0
4--------------------------0
5--------------------------0
6--------------------------0
do you see what i am trying to do? I am simply trying to number the dummycat column where ever dummyproduct = 0.
is this possible to do?
I need to update a empty column in our SQL database with the login ID for employees of our company.The table is called SY01200 and were I need to put the login ID is column INET5, and the login ID is just me stripping off the company's email address(removing the @company.com), and I need to update the INET5 column only where Master_Type = 'EMP'
And here is the Query that I am using to strip the email select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp'And here is what I thought the Query would be to update however I got and error saying more than 1 arguement returned
UPDATE sy01200
SET INET5 = (select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp')
WHERE Master_Type = 'EMP'
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
Dear all,I need to update one field in a table for a given record and visit number.Example below is how the table looks -SID VISIT DLCO101 0 12101 1 16102 0 18102 2 10103 1 12103 2 14Here is how I would like it to look. The changes are the starred items.SID VISIT DLCO101 0 14*101 1 16102 0 18102 2 16*103 1 12*103 2 14I know it is an UPDATE statement, but I am not sure how to use it when Ineed to update more than one record.Thanks for the help in advance.Jeff
View 3 Replies View RelatedHi
I need to update one of the test databases:
There are about 140 tables which don€™t get used but I don't want to delete to I want to prefix them with 'x'.
Is this possible or do I have to alter each one, one at a time
Thanks
Rich
Hi all..
First of all Thanks for all the help, I received over the years from MSDN..
Here is my new problem...
I have a SQL table like following table..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
12/31/2049
Now here is what I want to do€¦
1> Sort the table based on Start Date (the picture shown is already sorted..) for example first 6 rows for AK - Anchorage
2> select the rows with same city (rows 1-6)
3> Select the rows with distinct start date (rows 1-3-5)
4> Change the End Date of the second selected row (row 3 in this case) to I day below the start date of 1 selected row. (4/1/2007 €“ 1 day = 3/31/2007)
5> proceed till end of selected rows.. 1-3-5
6> do the same thing for rows 2 and 4.
7> follow the same procedure for rest of the file.
The selected file should look like this when done..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
9/30/2006
Is there way to do this in SSIS? any recommened appprach>?
Any help with this is highly appreciated..
Thank You..
Consider i have 2 database namely database1 and database2 . both the databases are in the same server
database1 has a following tables
1.the table "class" has following fields and many more fields. consider 50 fields but for the use of example i have given only three fields name and sample values. class studentname rollno (table name - class) 8th std aaaaa 100
2. the table "Fees" has the following fields and many more fields. consider 25 field but for the use of example i have gievn only 2 fields name and sample values rollno fees (table name - fees) 100 50000 101 25000
Now i have created the following tables in database2 the table "class" has the following fields only, class studentname rollnothe table "fees" has the following fields only. rollno fess
Question ?please let me know if there is any tool or method . to transfer values from database1 to databse2
now i want to update all the three tables with the help of asp.net in the table PhoneExtraFieldAliasalias should be replased by the inputed values say in filed1 = 'date' so now filed1 should behave like as date column and if no data is inputed then field should be 'null' and it picks up its value from phoneextra and phonemst and all the task are performed in one form of asp.net in phoneextra nad phoneextrafieldalias tables has phoneid is comman.first it takes data from phoneextrafiledalias then its value from phoneextra CREATE TABLE [dbo].[PhoneExtra] ([PhoneID] [varchar] (12) NOT NULL ,
[Field1] [varchar] (50) NULL ,[Field2] [varchar] (50) NULL ,[Field3] [varchar] (50) NULL ,[Field4] [varchar] (50) NULL ,[Field5] [varchar] (50) NULL ,[Field6] [varchar] (50) NULL ,[Field7] [varchar] (50) NULL ,[Field8] [varchar] (50) NULL ,[Field9] [varchar] (50) NULL ,[Field10] [varchar] (50) NULL ,[Field11] [varchar] (50) NULL ,[Field12] [varchar] (50) NULL ,[Field13] [varchar] (50) NULL ,[Field14] [varchar] (50) NULL ,[Field15] [varchar] (50) NULL ,[Field16] [varchar] (50) NULL ,[Field17] [varchar] (50) NULL ,[Field18] [varchar] (50) NULL ,[Field19] [varchar] (50) NULL ,[Field20] [varchar] (50) NULL ) ON [PRIMARY]
GO
CREATE TABLE [dbo].[PhoneExtraFieldAlias] ([CampaignID] [varchar] (20) NOT NULL ,[Field1] [varchar] (50) NULL ,[Field2] [varchar] (50) NULL ,[Field3] [varchar] (50) NULL ,[Field4] [varchar] (50) NULL ,[Field5] [varchar] (50) NULL ,[Field6] [varchar] (50) NULL ,[Field7] [varchar] (50) NULL ,[Field8] [varchar] (50) NULL ,[Field9] [varchar] (50) NULL ,[Field10] [varchar] (50) NULL ,[Field11] [varchar] (50) NULL ,[Field12] [varchar] (50) NULL ,[Field13] [varchar] (50) NULL ,[Field14] [varchar] (50) NULL ,[Field15] [varchar] (50) NULL ,[Field16] [varchar] (50) NULL ,[Field17] [varchar] (50) NULL ,[Field18] [varchar] (50) NULL ,[Field19] [varchar] (50) NULL ,[Field20] [varchar] (50) NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[PhoneMst] ([PhoneId] [varchar] (12) NOT NULL ,[PhoneNo] [varchar] (50) NOT NULL ,[Name] [varchar] (50) NULL ,[Sex] [char] (1) NULL ,[Company] [varchar] (100) NULL ,[Address] [varchar] (150) NULL ,[City] [varchar] (50) NULL ,[State] [varchar] (50) NULL ,[Zip] [varchar] (50) NULL ,[Country] [varchar] (50) NULL ,[Email] [varchar] (60) NULL ,[Website] [varchar] (50) NULL ,[Fax] [varchar] (50) NULL ,[EntryOn] [datetime] NULL ,[Remarks] [varchar] (10) NULL ) ON [PRIMARY]GO
I have a webform contains a list of documents and information about them. What would be the best way to update any changes back to the database where I would need to log each change into an audit table as well.
For example:document changedA YesB NoC Yes
I would need to take this information and update the documents table with the changes from A and C, but ALSO would need TWO entries in my audit log table. One for A and one for C. Is there a quick way to do this or will I need to use loops and/or cursors? I'm trying to find a way that won't kill my performance. Thank you.
Even if indexes are good, isn't there still a performance issue with updates to a very fat table (333 columns and almost 8030 bytes, with over 100,000 rows). We are looking at 300 users updating this table 400-500 times an hour. I had no input on the table design, but I can complain. All the updates are sql, not sp's
View 2 Replies View RelatedHello I have two tables users and Private I want to be able to view, update, delete info from the two tables from one screen
scenario user logs in to system system stores userID and transfers userID to new table this user id will be used by sql to load only that users details (UserID is PK for users and FK for private) the user will be able to update some of their info. as an admin they will use the same procedure except they will be able to see all members details and add new members using update or delete. I have tried to use a data Sqladaptor to do this but the info will display it will not allow delete update. If I load both tables into separate Sqladaptors they are not in sync anyone have any suggestions
thanks
M
I have two tables:
table 1
-------
code
description
colour
size
active
table 2
-------
code
location
sales_region
active
How can I, using SQL Server 2005, update both tables so that
colour = red
location = Wisconsin
size = medium
active = yes
where code = AL1
please?
table 1 has code as the primary key. table 2 has no index.
Okay, here is my issue:I have an access program that tracks the location of certain items.When the items are moved their record will be added with transferinformation.So, there are two tables: tblContents and tblTransfertblContents holds all the relevant information about each item as wellas a flag for transferred items and tblTransfer holds all thetransferred item information.My problem is: How do I update tblTransfer when an item in tblContentsgets flagged true?btw, this is using a .asp front end to interact with the database.
View 1 Replies View RelatedI'm writing a sproc to update a table based on parameters being passed into it. Here is the sproc:
Code Block
CREATE PROCEDURE [dbo].[UpdateLicense]
@VendorId int,
@PoId int,
@LicenseTypeId int,
@LicenseUserId int,
@LocationId int,
@LicenseStartDate smalldatetime,
@DaysAllowed int,
@SerialNum varchar(50),
@ActivationKey varchar(50),
@MaxUsers int,
@Comments varchar(1000),
@LicenseId int
AS
BEGIN
UPDATE license
SET
vendor_id = @VendorId,
po_id = @PoId,
license_type_id = @LicenseTypeId,
lic_user_id = @LicenseUserId,
location_id = @LocationId,
lic_start_date = @LicenseStartDate,
days_allowed = @DaysAllowed,
serial_num = @SerialNum,
activation_key = @ActivationKey,
max_users = @MaxUsers,
comments = @Comments
WHERE license_id = @License_id;
END
When I try to compile this I get the following error:
Error Message
Msg 137, Level 15, State 2, Procedure UpdateLicense, Line 35
Must declare the scalar variable "@License_id".
My first question is what line is line 1? Does the line count include every line, even comments? Becuase, if so, then line 35 is "location_id = @LocationId," which makes no sense to me given the error message about the scalar variable. I am probably missing a comma or something but I cant see it. Anyone?
Hi,
Is it possible to update two tables with the same stored procedure. I want to update the tables Member an Login using the same SP. If not is it possible to use two stored procedures but the same SQLconnection with two command statements?
e
USE [AdminDB]
ALTER PROCEDURE [dbo].[swim_insert_ipnumber]
@member int,
@mbrFirstName nvarchar(15),
@mbrLastName nvarchar(15),
@mbrEmail nvarchar(15),
@lgnIPnumber int
AS
BEGIN
update Member,, Login
set Member.mbrFirstName = @mbrFirstName,
Member.mbrLastName = @mbrLastName,
Member.mbrEmail = @mbrEmail,
Login.lgnIPnumber = @lgnIPnumber
where mbrMemberNumber = @member
END
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
I'm trying to update a checkbox from "False" to "True" within a single table for multiple records. I can update a single record using the script below. However, I'm having trouble applying additional Id's to the string.
(Works) - Update Name_Demo set KEY_CONTACT = 'true' where ID = 225249
(doesn't work) - Update Name_Demo set KEY_CONTACT = 'true' where ID = '225249, 210014, 216543'
It says query executes successfully but returned no rows.
I'm using a stored proceedure which should update a number of rows in atable depending on a key value supplied (in this case 'JobID'). Butwhat's happening is when I call the proc from within the program, onlyone row gets updated.SoWhen I call the proc from Query Analyser, all rows get updated.When I call the proc from within the program, only one row gets updatedAny ideas as to why this is happening??JobID Description Price Status----------------------------------------------73412 Documents:Item 3 .00 073412 Documents:Item 5 .00 073412 Documents:Item 2 .00 073412 Documents:Item 4 .00 073412 Documents:Item 1 .00 0^^^^Only one record gets updated, so the table ends up being...JobID Description Price Status----------------------------------------------73412 Documents:Item 3 .00 473412 Documents:Item 5 .00 073412 Documents:Item 2 .00 073412 Documents:Item 4 .00 073412 Documents:Item 1 .00 0Public Sub UpdateAllItems() As BooleanDim objCnn As ADODB.ConnectionDim objCmd As ADODB.CommandSet objCnn = New ADODB.ConnectionWith objCnn.ConnectionString = cnConn.CursorLocation = adUseClient.OpenEnd WithSet objCmd = New ADODB.CommandSet objCmd.ActiveConnection = objCnnWith objCmd.CommandText = "sp_UpdateJobItem".CommandType = adCmdStoredProc.Parameters.Append .CreateParameter("@Status", adInteger,adParamInput, 4, Me.Status).Parameters.Append .CreateParameter("@JobID", adInteger,adParamInput, 4, Me.iJobID).ExecuteEnd WithSet objCnn = NothingSet objCmd = NothingEnd Sub-----------------------------------------------------------------SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOALTER PROCEDURE dbo.sp_UpdateJobItem@JobID As int, @Status As intAS--================================================== ===========================================SET XACT_ABORT OFF -- Allow procedure to continue aftererrorDECLARE @error integer -- Local variable to capture theerror OnHoldAction.--================================================== ===========================================BEGIN TRANSACTIONUPDATE tbl_JobItemsSET Status = @statusWHERE JobID = @JobID--================================================== ===========================================-- Check for errors--================================================== ===========================================SELECT @error = @ERRORIf @error > 0BEGINROLLBACK TRANSACTIONENDElseBEGINCOMMIT TRANSACTIONENDGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
View 13 Replies View Related