Hi,
I need to update just a portion of a column value in a table.
example,
Order_data = 'source=ABD00050&ordsrc=&ecode=ABD00001'
Order_data ='source=ABD00050&ecode=ABD00001'
for both of these values of Order_data I just need to update value of ecode..
Please help..
Thanks,
Reva
Trying to update part of a field. Currently using ColdFusion 4.0 and SQL Server 7.0.
My field looks something like this: ABC.DEF.GHI and I just want to update the last 3 characters, GHI. The length of the field may change so it's not going to be 11 characters long.
Any help would be appreciated.
Need Help...I have to update a link in database. There are about 20,000 of them. I can update the link but i only need to update part of the link. Also, I don't want to touch the AccessionNumber because they are unique. I would like to update DSN=test to DSN=imagecast.
I'll appreciate any help Thanks in advance!
UPDATE IDX_attach
SET image_path = REPLACE (image_path, ‘http://CLINIC001=&Mode=VIEWIMAGE&DSN=test&AccessionNumber=169328’, ‘http://CLINIC001=&Mode=VIEWIMAGE&DSN=imagecast&AccessionNumber=169328)
WHERE image_from = ‘IDX Images’
Hello all,
I have a table that holds a large amount of text in a field that is the body of the email. For example, it might say something like:
Quote: Email tech support at thisemail@email.com if you have any questions about the results of this test.
I need to change the email address in this field. Using this example I need to change thisemail@email.com to thatemail@email.com; however I do not want to change the other text in that field.
It is also important to note that the rest of the body of the emails stored here is different depending on the email.
So basically what I need is a statement that would look at a particular field, search for an email address, and replace that email address with another one without disturbing the rest of the text in that field. I already checked the w3 update tutorial and the update there is for the entire field.
Thanks for the help in advance!
I need to set only the date part of tblEventStaffRequired.StartTime to tblEvents.EventDate while maintaining the time part in tblEventStaffRequired.StartTime.
UPDATE tblEventStaffRequired
SET StartTime = <expression here>
FROM tblEvents INNER JOIN
tblEventStaffRequired ON tblEvents.ID = tblEventStaffRequired.EventID
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Any suggestions?
Hello All,
I've been struggling with this for a few weeks now. I have this table with the following information:
08/10/2006 10:31:13 AM
08/14/2006 1:32:10 PM
38895.396528
38916.584873
38917.5639
38922.398727
38919.482083
9/20/2006 12:01:19 PM
09/08/2006 1:32:02 PM
38894.73316
38918.543229
38926.564954
08/10/2006 12:31:25 PM
08/10/2006 12:31:25 PM
08/09/2006 1:03:25 PM
What I'm trying to do is get these dates w/timestamps (38926.564954) into this format
08/09/2006 1:03:25 PM . Please help!!!!! Thanks.
ok can i append some data to the data inside a column??
View 4 Replies View RelatedHi,
I am looking for some help in MS SQL server. I want to access the columns of a table without using the names of the colulmns.
Example - SELECT table1.field[1], table1.field[2] FROM table1;
Any information to this effect is much appreciated.
cheers/- Pradeep
Hi,
I need to automate the procedure of selecting column with numeric and passing those column values as string to another stored procedure.
Here is sample code :
CREATE procedure procdeure1 @Utility varchar(50) WITH RECOMPILE
as
if @Utility='Electricity'
begin
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmers1')
DROP TABLE gmmers1
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmers2')
DROP TABLE gmmers2
create table gmmers1(sitecode varchar(15),
Gen_Electricity_Usage bigint
)
create table gmmers2 (gmmerssitecode varchar(15),
Gmers_Electricity_Usage bigint
)
insert into gmmers1
Select site.Sitecode,sum(isnull(AcctRptdata.ElectricityUse,0)*factor) as 'Electricity Usage'
From GEN..AcctRptdata AcctRptdata, GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings
Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and
--((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and
((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and
site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')
and len(sitecode ) = 8
and AcctRptdata.idsvc in (100) and
SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitElec and
SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 1
and site.Sitecode not like '%B%'
and site.sitecode not like '9999%'
and AcctRptdata.ElectricityUse >0 --Added on 16th Aug
and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)--= 11)
--and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11)
Group by site.Sitecode having sum(AcctRptdata.ElectricityUse*factor) > 0 Order by site.Sitecode
insert into gmmers2
select left (sitecode, 8) BU, sum(isnull(KWh_Purchased_Quantity, 0 )) as 'electric use' from gmers_prodn..electricity_data
where sitecode in --(select sitecode from facility_data where left (sitecode ,8) in
(select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 )
-- and len (sitecode) = 11)
and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01'
--and sitecode like 'A0916323%'
and sitecode not like '%B%' and left(sitecode,8) not in ('N0010024','N0010088','N0010101','N0010173',
'N0010373','N0010447') and sitecode not like '9999%'
group by left (sitecode, 8) order by left (sitecode, 8) -- yyyy-mm-dd
select *,(Gen_Electricity_Usage-Gmers_Electricity_Usage)as Diff from gmmers1,gmmers2
where gmmers1.sitecode=gmmers2.gmmerssitecode and (Gen_Electricity_Usage-Gmers_Electricity_Usage) <>0
end
else if @UTILITY='GAS'
begin
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gengas')
DROP TABLE gengas
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmersgas')
DROP TABLE gmmersgas
create table gengas(sitecode varchar(15),
Gen_Gas_usage bigint
)
create table gmmersgas (gmmerssitecode varchar(15),
Gmers_Gas_Usage bigint
)
insert into gengas
Select site.Sitecode,sum(isnull(AcctRptdata.NaturalGasUse,0)*factor) as 'Gas Usage' From GEN..AcctRptdata AcctRptdata,
GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings
Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and
--((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and
((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and
site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')and
len(sitecode ) = 8 and AcctRptdata.idsvc in (200,300) and
SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitGas and
SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 61
and site.sitecode not like '%B%' and site.sitecode not like '9999%'
and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)
and AcctRptdata.NaturalGasUse >0 ----Added on 16th Aug
--and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11)
Group by site.Sitecode having sum(AcctRptdata.NaturalGasUse*factor) > 0 Order by site.Sitecode
insert into gmmersgas
select left( sitecode, 8 ) BU , sum(Utility_Natural_Gas_Volume) as 'gas use' from GMERS_PRODN..fuel_data
where sitecode in --(select sitecode from facility_data where left (sitecode,8) in
(select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 )
-- and len(sitecode )= 11 )
and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01'
and sitecode not like '%B%' and sitecode not like '9999%'
group by left( sitecode, 8 ) order by left( sitecode, 8 )
select *,(Gen_Gas_usage-Gmers_Gas_Usage)as Diff from gengas,gmmersgas
where gengas.sitecode=gmmersgas.gmmerssitecode and (Gen_Gas_usage-Gmers_Gas_Usage)<>0
end
My aim is to pass sitecode having difference <>0 and from date and todate as an parameter to another stored procedure which updates sitewise for the utility so that in case a particular sitecode with same date range is included in one utility it should not be repeated in another utility.
Hi,
If I am taking a Matrix and right clicking on the column header and click on the SubTotal then it always place that column on the right of it .If I want to place that column to the left of my original column then I can't do it.
Adding manual column and then puuting the Expresstion =Sum(Fields!MyCol.Value) is not halping as it will give me the same value that is there in the column instead of giving me the column
-Thanks,
Digs
hi ,
this is my first post on MS Forums .
Q: my question is that , i want to format a date column .. d/m/yyyy .. but there is no any format facility ..
anybody can help me here ??
I'm in a middle of a project where replication established between Oracle 8i and SQL server 2005. Now we need to drop one column from on of the tables replicated from Oracle side. My question : Is there anyway I can do this in Oracle and automatically reflected on SQL server? If not what is the proper steps to do it. Realy appreciate your fast response.
Regards
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
I have made the following Scalar-valued function:
CREATE FUNCTION [dbo].[TimeCalc]
(
@OriginalTime AS INTEGER
, @TenthsOrHundredths AS INTEGER -- code 2: 1/10, code 4: 1/100
)
RETURNS NVARCHAR(8)
[Code] ....
What it does is convert numbers to times
E.g.: 81230 gets divided by 10 (times in seconds: 8123). This 1 1 full minute, and the remainder = 2123 making it 1.21.23 mins)
So far so good (function works perfectly)
My question: sometimes times are in 1/100 (like above sample), sometimes in 1/10.
This means that, e.g. with a time like 3.23.40 the last zero must be deleted.
My thoughts are to use the results from the Return Case part, and as the code = 4: leave it as it is,
is the code 2 the use LEFT(... result Return Case ..., Len(..result Return Case.. - 1))
There are 5 codes: 0 1 2 3 and 4
I have used the Microsoft code below to create a link to SQL server from access. I am using DAO not ADODB. Someone said that I should use dblib instead of ODBC in the connection string below in order to get the connection to work.
Does anyone know the correct syntax for OLE DB connection string and can it be used with DAO? I am getting an error "ISAM path not found"?? Seems I have wrong connection string syntax?? Please advise.
Thanks again for your help.
-------------------------------------------------------------------------
Sub ClientServerX3()
Dim dbsCurrent as Database
Dim tdRoy as TableDef
Set dbsCurrent = CurrentDb
Set tdfRoy = dbsCurrent.CreateTableDef("Roy")
tdfRoy.Connect = "ODBC;DATABASE=pubs;UID=sa;PWD=;DSN=Publishers"
***************IS THERE ANYWAY TO USE AN OLEDB (OR OTHER DSN-LESS)
***************CONNECTION HERE? How??
tdfRoy.SourceTableName = "Royalties"
dbsCurrent.TableDefs.Append tdfRoy
End Sub
Tell me please how can I make a foreing key constraint for a table using from another not all primary key or not all data. For example, I need to link a table "subject" with primary key "dscp_num, depart" using depart as a foreing key. But there is no table with such primary key, there is only table "codif_values" where selecting records by condition "codif_num = 1" gives the relation with necesary primary key to link. Also I need to link "subject" table as a primary key table with the table "ses_curr". But this table doesn't include "depart" field. It includes field "reg_num" that is a primary key in table "students". This table include field "stgroup" as a foreing key for table "groups". The last table includes "speciality" field that is a foreing key for table "specialities". And only this table includes "depart" field. Tell me please how I can make a foreing key constraint for table "ses_curr" by table "subject".
View 3 Replies View RelatedI want to add a new column in a table. In this column I want to include a Total Value. This Total Value exists already for dates after Sept 23, 2013. For dates before Sept 23, 2013 the total can be calculated using the following math:
Total = Total(t-1) - (Resource_Name1-Resource_Name1).
The Resource_Name column contains the Total field (after Sept 23) as well as the Resource_Name1 field. There is a third column called Direction which contains the values injection or withdrawal. The Resource_Name1 differes in value depending on whether it is injection or withdrawal. How do I create a new column with Totals for the full data set?
I have a huge question, it's for my job im doing now. I have a table with the name TWO.dbo.SVC06105. I want to be able to take the word "TWO" and put that into a variable. I know this doesn't look correct, but I want to be able to do something like this:
DECLARE @GPNAME CHAR(100)
SET @GPNAME = 'TWO'
SELECT * FROM @GPNAME.dbo.SVC06105
I know the SELECT statement isn't correct, but I hope that you guys understand what i'm trying to do through this example. BTW, I am new to this team so nice to meet you all. L8er
I want to hide a row n all pages except the first page , is there a way for doing this,
The haeder has totally 5 rows, But i want to hide only the 4th row, that too I want it in the first page and not the rest of the pages
I have a table like this :
reg.no |Â Â description |Â start_date |Â end_date |Â Â load_date
I want to join this table with itself on reg. no. But not all the rows in table must be joined.
But for example, rows with load_date 01-07-2015 to be joined with rows with load_date 02-07-2015. And the rest of the rows should not used in join (for example, rows having other load_dates)
Is this possible ? and how?
In MS SQL Server, I have the following tables with some data in it.create table table1 (column1 varchar(32),column2 int not null,column10 varchar(255),.....primary key (column1, column2),);create table table2 (column1 varchar(32),column2 int not null,column20 varchar(255) not null,....foreign key (column1, column2) references table1(column1, column2));Now, I need to change the all column types from varchar to nvarchar tosupport internationalized character set.I am able to do so, for columns column10 in table1 and column20 oftable2 without any problems by using command:"alter table table1 alter column column10 nvarchar(255);"But, when I try the similar thing for column1 of table1/table2, amgetting one error message saying like: "ALTER TABLE ALTER COLUMN failedbecause one or more objects access this column". I guess, this iscoming because of foreign key relationship between the tables.NOTE: While defining the table2, for foreign key I have not specifiedanything like "on update cascase" ...etc.How can I resolve this issue? Any suggestions/solutions are reallyhelpful to me. Thanks in advance.
View 2 Replies View RelatedHi,
I want to join a temporary table with a table in my stored procedure :
CREATE PROCEDURE sp_DeltaabgleichDarlehen
AS
BEGIN
SELECT Grundeinstellungen.Dat_Initialisierung, Grundeinstellungen.Dat_Jahresbeginn
INTO #temp_IniDatum
FROM Grundeinstellungen
INSERT INTO DeltaDarlStammdaten (Datum, Vertragsnummer)
SELECT ImpDarlStammdaten.Datum, ImpDarlStammdaten.Vertragsnummer
FROM ImpDarlStammdaten
WHERE ImpDarlStammdaten.Datum=#temp_IniDatum.Dat_Jahresbeginn
END
i get the error :
The multi-part identifier "#temp_IniDatum.Dat_Jahresbeginn" could not be boundfor example
What is the problem? and how can i solve this?
thank you
Jupp
Hi all,
I found an article which described about Distributed query to Oracle table with four-part name.
http://support.microsoft.com/kb/294459/en-us
However, we still got the same error with MSSQL2000 sp4 and SQL2005. Any fix to this?
I have 2 tables (table1KKK, table2KKK), and want to run the same query on them by using parameter with the value "1" or "2".
Is it possible to use that parameter as a part of the queried table name?
Something like (only for demonstration €“ doesn€™t work):
Select *
From table +myParameter + kkk
Thanks in advance!
Hello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
In my database I want to archive some rows based on the time stamp. I read that horizontal partitioning will do that. This partitioning will insert the rows from the table into some other Database - Tablename. In retrivng those rows back I need to issue separate queries and UNION the result set. Is this way is correct or there any better ways to do this? If it is I have another question. If I add a new column to the table I partitioned, what will happen to the table that I stored in other Database. Is that going to add this new column too?
If possible please give me a sample code or queries to partition the database.
Thank you.
I'm trying to replace a particular part of a row in a table with a new value.
The row is called "DataPath" and it has a lot of values like so:
mashOperationsComponent Data FilesSantec
I want to run a query to replace the mash with our DFS namespace share name companysharesDepartments but keep everything else past the mash part of the original row.
I'm currently running this query, it says it is altering 30,000 rows, but it doesn't look like it's doing anything at all..
UPDATE dbo.Part
SET DataPath = REPLACE(DataPath,'company.localsharesDepartments','mash')
WHERE DataPath like 'mash\%'
So for example, it would change the mash above to
company.localsharesDepartmentsOperationsComponent Data FilesSantec
Hi there,
We're going to use replication on our database. There are tables without any primary key.
Is a primary key necessary for replication?
I have also antoher question: We want to replicate the whole OLTP database (size 30 GB).
Is snapshot replication a suitable mechanisme for this? I thougt snapshot replication overwrites all of the data, not only changed data. Or should we use another replication method?
Thanks in advance,
Patrick de Jong
Hi All,
I have a Problem while updating one table data from another table's data using sql server 2000.
I have 2 tables named TableA(PID,SID,MinForms) , TableB(PID,SID,MinForms)
I need to update TableA with TableB's data using a single query that i have including in a stored procedure.
If the id1 will change in table1 it should also change the corresponding id1 field in table2 it does not do anything.
CREATE TRIGGER [dbo].[IDCHANGE]
ON [dbo].[table1]
AFTER UPDATE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
We have two tables with names X and Y.
X has a,b columns. And Y has c,d columns.
I want to update b column in X table with the values from d column in Y table on condition X.a=Y.c.