I am relatively new to SQL and am having trouble with an update. I know I cannot use a join update and have to use subquery. I am not sure of the syntax on how to do this. Below is basically what I want to do, but cannot figure out how to do it with a subquery. Any help would be appreciated.
update revisedapps
set alternateapp = t.alternateapp
from tempalternateapps t
join revisedapps r on t.appname = r.softwarename
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Hi All, I have a Problem while updating one table data from another table's data using sql server 2000. I have 2 tables named TableA(PID,SID,MinForms) , TableB(PID,SID,MinForms) I need to update TableA with TableB's data using a single query that i have including in a stored procedure.
I'm an sql/SSMSE novice, but have successfully connected to my sql database on a webserver.
My question is: Can I update the table data "directly" using SSMSE's interface, or do i have to run an sql update statement? (By updating table data directly, i mean: can i view the contents of a table, and simply edit the data in a field, like with in an MS Access table?) If I can update the data "directly," how does one do that?
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master UPDATE [dbname].dbo.table SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1 WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2 AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3 AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error: Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
I'm not sure if this could be done, but if anyone has any insight on how to do this please let me know...
Currently, I have a table that has a field of Categories. I recently created a Category table in which each category has it's own ID. I need to replace the Data that was in my original table with the new ID's based on the actual category name... Is there any way of doing this without manaul data entry?
I'm not sure if this could be done, but if anyone has any insight on how to do this please let me know...
Currently, I have a table that has a field of Categories. I recently created a Category table in which each category has it's own ID. I need to replace the Data that was in my original table with the new ID's based on the actual category name... Is there any way of doing this without manaul data entry?
Can you create an UPDATE TRIGGER and use some typeof code to figure out which SP just updated the current table?If not how can i achieve what i want?I tried to run SQL Profiler and i don't understand why i can'tsimply have the Profiler filter events only for the specific database idand the table's object id i chose?What am i doing wrong with SQL Profiler? I was testing thisthrough SQL EM. I had the filters chosen for a specific database idand a specific table's object id, yet when i open another table SQLProfiler captures that information too.Thank you
I could use some help on how to save the result of my data-flow in an existing table.
I have created a data flow. I have no trouble storing the result of the flow in a new table. But I'm trying to store the result of my data flow in an existing table. (The flow involves fuzzy grouping, and i would like to store the result in the original table on which the fuzzy grouping was performed). But I cannot get it to work.
I can select the existing table as OLE DB destination. I can write an SQL to manipulate this table, but how do i address the result of the flow in the SQL?
I have a dataset that was created via a source + lookups + derived columns.
I wish to take this dataset and treat is as a table within a sql statement so that I can update a permanent table with the a specific value within the temp dataset.
In sql this is what I am trying to do:
SELECT COUNT(*) AS Count_of_Employees, DEPT FROM Employees GROUP BY DEPT
UPDATE Departments SET Number_of_Employees = Count_of_Employees WHERE Dept = dept.
I have a table with a datetime field 'TheDate'. Currently dates are stored as 'mm-dd-yyyy 00:00:00'. Is there a way to get just the month, day and year parts, '01/01/2008' into the field without changing the field data type to varchar? I'm asking because when I do this:
update TheTable set TheDate = substring(convert(varchar,TheDate,101),1,10)
I'm still getting a date in the format 'mm-dd-yyyy 00:00:00' stored in the table. I'd like to be able to lose the time portion, but I'd like to be able to keep the datetime datatype for date math purposes. Can it be done?
I'm trying to move my current use of an sql 2000 db to sql 2005.
I need to update a table definition (to change a field to an Identity)
I'm getting a dialog box (in SQL server management studio) on save saying :
'xxxx' table
- Saving Definition Changes to tables with large amounts of data could take a considerable amount of time. While changes are being saved, table data will not be accessible.
I press 'Yes' to the dialog box.
After 35 seconds, I get another dialog box saying:
'xxxx' table
- Unable to modify table.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Well, the server is responding and I can query that talbe and other, I can add/delete rows to other columns. I can modify other (smaller) tables.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database which is configured and set on the hosting web server. Right now for managing my sql server 2005 database, i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database, it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors. Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still the problem persist.
Im trying to create an update statement which references two tables (join) and has a CASE clause attached. Not sure where im going wrong...
Using T-sql!!!
update import set import.gone = from import inner join stat ON stat.id = import.id CASE WHEN stat.A = import.field2 THEN import.gone = sec.A WHEN stat.B = import.field2 THEN import.gone = sec.B WHEN stat.C = import.field2 THEN import.gone = sec.C WHEN stat.D = import.field2 THEN import.gone = sec.D WHEN stat.E = import.field2 THEN import.gone = sec.E WHEN stat.F = import.field2 THEN import.gone = sec.F ELSE import.gone = null END
I want to write trigger code to update values in table1 to table2. ALTER, CREATE, DROP cannot be used in a trigger, I guess.
Tabel1 ID, Name, Asset, Date, Active --------------------------------- 1, A, 10 , 01/08/04 Y 1, B, 16 , 06/08/04 Y 1, C, 12 , 07/08/04 Y 1, D, 13 , 10/08/04 Y 2, E, 10 , 15/08/04 Y 2, F, 11 , 16/08/04 Y 2, Y, 12 , 01/08/04 N 2, G, 15 , 17/08/04 Y 3, H, 13 , 19/08/04 Y 3, I, 15 , 02/08/04 N
As you can see, code must select only active('Y') names in table1 arrange in descending order of asset for each ID and updates(or insert into?)table2. Please help me with code
How do I update a table from another table which resides in a different database but on the same server. Example Update table a which is in database 1 from table b which is database 2. Please help I need this as soon as possible. Thanks in advance to anyone who can help.
Accidents, Vehicles, Casualties. the relationship is many vehicles to an accident and many casualties to a an accident.
I have one new table which will contain all the vehicles related to all accidents. however i want to be able put in all casualties that every vehicle is related to..so within the new table, there are three severities of casualties Vehicledetails column severity1 severity2 severity3
For every vehicle where there is 0 or more casualties I want to be able put a (total )number for each category of casualty( severity in the VehicleDeatils table ) into the columns in vehicledriverdetails
how can i do this?? i dont want ot have to manually update every single entry one by one...
I am trying to update one table with information from another - which became corrupt. The data layout is the same. cand_id below is the key, and thus can only returnb a single value. Any help is most appreciated. Thanks. This is the attempt I took:
update mwm.jf_candidates C
set c.ed_occ = x.ed_occ
from mwm.jf_candidates C, mwm.jf_candidates_corrupt X
I know this is probably really obvious but I am trying to insert values into columns into a table if a client exists and I can't for the life of me figure out the syntax. It is something like this:
table A Client_Id Field 1 Field 2
Insert (Field1) into Table_A Select field1 from table_B Where Table_B.Client_Id = Table_A.Client_id
Whenever I run this query Iget the following error message. Can anyone tell me why. I get the same error with or without the "Distinct"
Query:
update Clients set Clients.Siccode = (Select distinct updateSIC.siccode from updateSIC where Clients.accountnumber = updateSIC.accountnumber)
Error Message:
Server: Msg 512, Level 16, State 1, Line 1 Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression. The statement has been terminated.
Ok this may be really simple but I am totally not seeing this at the moment. I have a table and I need to update this table with records from another table but I need all the rows from both tables and those that match.
Table A ID Data1 A 100 B 200
Table B ID Data2 B 333 C 345
Results should be ID Data1 Data2 A 100 B 200 333 C 345
When I insert data in my table, it don't update untill I click on the "!" execute button. I need my table to update as sonn as I insert information in there. Could some one tell me how to do this. Thanks.
Hi , I am very new to this. I need help updating a table. Here is what I am doing.
I have a table("TransferRequest") that has some records and Date_Transferred field.. Every 10 mins I need to check a view("v_UnTransferred") that checks the untransferred requests from the table and transfer them. After this process, the Date_Transferred field in the table needs to be updated with the time it was transferred. Here is my code:
Dim rsSched As New ADODB.Recordset Dim cmd As New ADODB.Command
need some help, I want to replace 422 entries in 2 columes of a table with date from 2 columes of a table from a different data base example replace the data lname colume of customer table from the test database, using data from the last_name colume of the address table from the stores database
I have limited knowledge on sql scripts thanks for any help
I need to update the data in one table with dat from another.
i have a table called tblclients and a column called intethnicity. I also have a table called tblethnicity. The column in the table intethnicity should be the primary key integer for the corresponding ethnicity. So since most of the clients are caucasian, and the id for caucasian is 4, the intethnicity column should be 4.
Here is the problem:
I have a table of 1300 hundred records and the column intethnicity now has the actual ethnicity in it instead of the corresponding id for the ethnicity. I need a way to update all the records so that the intethnicity column has the id for the corresponding ethnicity, not the actual ethnicity itself.
I know I can go uodate tblcients set intethnicityid =4 where intethnity ='white', but that would take too long.
I need a way to update the column based on the id from the table ethnicity.
I€™m in the process of rewriting several AbInitio graphs into SSIS and ran into something that I€™m not sure how to handle in SSIS. In AbInitio when you use their update component you can redirect records that aren€™t used in the update command. How would I do the same thing in SSIS?
Right now I€™m using the OLE DB Command component but don€™t see how I can take the records that didn€™t update anything and capture them in a flow out. Any help would be greatly appreciated.
I’m a complete newbie so forgive this question. If i have 2 tables Table 1 has the columns for NNAME, PHNUM, SSN, DOB, JOB, UPDATED however the Job description is emptyTable2 has the columns for SSN and JOB The question is, how I write an update statement that looks at the SSN in table2 matches it to SSN in table 1 and fills in the job description for that person in table1 and adds yes to the UPDATED field. I have somewhere in the neighborhood of 25,000 records to update.any help would be greatly appreciated.Thank YouAdam
If I have a table with three fields (A, B, C) and 'A' is a primary key, 'B' and 'C' do not have any content and another table with the same number of fields contains the same fields(A, B, C) and the fields do contain data.
I want to populate the first table with the data from the second table where the primary key 'A' is equal.