is there a way to update multiple rows in one update query in tsql? what I wanted to do is for example I got a table containing
code : desc
1 : a
2 : b
3 : c
4 : d
1 : e
3 : f
I wanted to update it to
code : desc
1 : x
2 : b
3 : y
4 : d
1 : x
3 : y
how to do it?
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
I am working on a project that was assigned to me that has to do with data in one of our SQL databases. I have the following query that takes information from a single table and averages test scores for each student.
--Group all scores from same student and average them together
with cte_names as
(
SELECT StudentID, MAX(StudentName) AS StudentName
FROM LDCScores
WHERE schoolYear='2014-2015' AND term = 3
GROUP BY StudentID
[code].....
I now need to take the results from the above query and determine the percentage of students, per school that scored a 2 or greater in grade 7 for each test. For grade 8 scored a 2.5 or greater, grade 9 scored a 3 or greater, grade 10 scored a 3 or greater, grade 11 scored a 3.5 or greater, and grade 12 scored a 3.5 or greater.
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
How would I update a table where id = a list of ids?Do I need to parse the string idList? I am being passed a comma seperated string of int values from a flex application.example: 1,4,7,8 Any help much appreciatedBarry 1 [WebMethod]
2 public int updateFirstName(String toUpdate, String idList)
3 {
4 SqlConnection con = new SqlConnection(connString);
5
6 try
7 {
8 con.Open();
9 SqlCommand cmd = new SqlCommand();
10 cmd.Connection = con;
11 cmd.CommandText = "UPDATE tb_staff SET firstName = @firstName, WHERE id = @listOfIDs";
12
13
14
15 SqlParameter firstName = new SqlParameter("@firstName", toUpdate);
16 SqlParameter listOfIDs= new SqlParameter("@listOfIDs", idList);
17
18
19
20 cmd.Parameters.Add(firstName);
21 cmd.Parameters.Add(listOfIDs);
22
23 int i = cmd.ExecuteNonQuery();
24 con.Close();
25 return 1;
26
27 }
28 catch
29 {
30 return 0;
31 }
32 }
33
34
Hi,New to writing sql scriptI get this error in my sql scriptServer: Msg 512, Level 16, State 1, Line 1Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.The statement has been terminated.I want to write a single sql script which will update column 1 (FK)in table A with column 1 (PK) in table BHere's an example of what I need to doTable DATA_A-------------column C1 (Foreign Key)111111222222333333334455Table DATA_B------------column C1 (Primary Key) Column C2 Column C311 ABC NULL12 ABC 2004-12-1222 EFG NULL23 EFG 2003-12-1233 HIJ NULL34 HIJ 2003-12-1244 KLM 2005-02-0255 JJJ NULLI need to update Table DATA_A set column C1 with 11 data to point toTable DATA_B column C1 with 12 data. Currently, the problem is theTable DATA_A Column C1 is pointing to the wrong primary key which hasNULL data in COLUMN C3. I need to point to the correct Primary Key withDate filled in Column 3. The two primary key is tied together bycolumn C3.Here's my SQl scriptUPDATE DATA_A SET C1 =(SELECT C1 FROM DATA_BWHERE C2 in(SELECT B1.C2 FROM DATA_B B1WHERE EXISTS(SELECT * FROM TABLE_B B2 WHERE B2.C3 is NOT NULL)AND EXISTS(SELECT * from TABLE_B B2 WHERE B2.C3 is NULL)AND B2.C2 = B1.C2GROUP BY B1.C2HAVING COUNT(B1.C2) = 2)AND C3 IS NOT NULL)WHERE(SELECT C1 FROM DATA_BWHERE C2 in(SELECT B1.C2 FROM DATA_B B1WHERE EXISTS(SELECT * FROM TABLE_B B2 WHERE B2.C3 is NOT NULL)AND EXISTS(SELECT * from TABLE_B B2 WHERE B2.C3 is NULL)AND B2.C2 = B1.C2GROUP BY B1.C2HAVING COUNT(B1.C2) = 2)AND C3 IS NULL)Thanks - Been struggle at this for a whileMLR
View 1 Replies View RelatedOK, I am trying to update a particular column with a numerical number. Here is the query I am using.
UPDATE viewerblock SET dummycat = (?) WHERE dummyproduct = 0
I am trying to number dummycat row to a certain number for example
dummycat-----------------dummyproduct
1--------------------------0
2--------------------------0
3--------------------------0
4--------------------------0
5--------------------------0
6--------------------------0
do you see what i am trying to do? I am simply trying to number the dummycat column where ever dummyproduct = 0.
is this possible to do?
I need to update a empty column in our SQL database with the login ID for employees of our company.The table is called SY01200 and were I need to put the login ID is column INET5, and the login ID is just me stripping off the company's email address(removing the @company.com), and I need to update the INET5 column only where Master_Type = 'EMP'
And here is the Query that I am using to strip the email select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp'And here is what I thought the Query would be to update however I got and error saying more than 1 arguement returned
UPDATE sy01200
SET INET5 = (select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp')
WHERE Master_Type = 'EMP'
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
Hi all..
First of all Thanks for all the help, I received over the years from MSDN..
Here is my new problem...
I have a SQL table like following table..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
12/31/2049
Now here is what I want to do€¦
1> Sort the table based on Start Date (the picture shown is already sorted..) for example first 6 rows for AK - Anchorage
2> select the rows with same city (rows 1-6)
3> Select the rows with distinct start date (rows 1-3-5)
4> Change the End Date of the second selected row (row 3 in this case) to I day below the start date of 1 selected row. (4/1/2007 €“ 1 day = 3/31/2007)
5> proceed till end of selected rows.. 1-3-5
6> do the same thing for rows 2 and 4.
7> follow the same procedure for rest of the file.
The selected file should look like this when done..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
9/30/2006
Is there way to do this in SSIS? any recommened appprach>?
Any help with this is highly appreciated..
Thank You..
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
I'm using a stored proceedure which should update a number of rows in atable depending on a key value supplied (in this case 'JobID'). Butwhat's happening is when I call the proc from within the program, onlyone row gets updated.SoWhen I call the proc from Query Analyser, all rows get updated.When I call the proc from within the program, only one row gets updatedAny ideas as to why this is happening??JobID Description Price Status----------------------------------------------73412 Documents:Item 3 .00 073412 Documents:Item 5 .00 073412 Documents:Item 2 .00 073412 Documents:Item 4 .00 073412 Documents:Item 1 .00 0^^^^Only one record gets updated, so the table ends up being...JobID Description Price Status----------------------------------------------73412 Documents:Item 3 .00 473412 Documents:Item 5 .00 073412 Documents:Item 2 .00 073412 Documents:Item 4 .00 073412 Documents:Item 1 .00 0Public Sub UpdateAllItems() As BooleanDim objCnn As ADODB.ConnectionDim objCmd As ADODB.CommandSet objCnn = New ADODB.ConnectionWith objCnn.ConnectionString = cnConn.CursorLocation = adUseClient.OpenEnd WithSet objCmd = New ADODB.CommandSet objCmd.ActiveConnection = objCnnWith objCmd.CommandText = "sp_UpdateJobItem".CommandType = adCmdStoredProc.Parameters.Append .CreateParameter("@Status", adInteger,adParamInput, 4, Me.Status).Parameters.Append .CreateParameter("@JobID", adInteger,adParamInput, 4, Me.iJobID).ExecuteEnd WithSet objCnn = NothingSet objCmd = NothingEnd Sub-----------------------------------------------------------------SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOALTER PROCEDURE dbo.sp_UpdateJobItem@JobID As int, @Status As intAS--================================================== ===========================================SET XACT_ABORT OFF -- Allow procedure to continue aftererrorDECLARE @error integer -- Local variable to capture theerror OnHoldAction.--================================================== ===========================================BEGIN TRANSACTIONUPDATE tbl_JobItemsSET Status = @statusWHERE JobID = @JobID--================================================== ===========================================-- Check for errors--================================================== ===========================================SELECT @error = @ERRORIf @error > 0BEGINROLLBACK TRANSACTIONENDElseBEGINCOMMIT TRANSACTIONENDGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
View 13 Replies View RelatedHello All
I am trying to figure out if what i am attempting to do is possible and whether or not my approach is wrong to begin with.
I am trying to build a custom report for our accounting system which is Traverse from Open systems. This is what i have done in the stored procedure thus far
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER PROCEDURE rptArFLSalesByCustItemized_sp
@custId pCustID,
@dateFrom datetime,
@dateThru datetime,
@itemIdFrom pItemId,
@itemIdThru pItemId
as
set nocount on
-- define some variables for previous year
declare @LYqty int, @LyAmt money, @LYfrom datetime, @LYthru datetime
-- set defaults
SET @itemIdFrom=ISNULL(@itemIdFrom,(SELECT MIN(itemId) FROM tblInItem))
SET @itemIdThru=ISNULL(@itemIdThru,(SELECT MAX(itemId) FROM tblInItem))
SET @LYfrom=DATEADD(YEAR,-1,@dateFrom)
SET @LYthru=DATEADD(YEAR, -1, @dateThru)
-- create small temp table to hold customer info
Create Table #tmpArCustInfo
(
custId pCustID,
custName VARCHAR (30),
)
-- populate customer temp table with info
Insert into #tmpArCustInfo
select custId, custName
from tblArCust
WHERE custId = @custId
-- create a temp table to hold the Data for each Item
Create Table #tmpArSalesItemized
(
itemId pItemId,
productLine VARCHAR (12),
pLineDesc VARCHAR (35),
descr VARCHAR (35),
LYQtySold int,
LYTDQtySold int,
QtySold int,
LYTDsales money,
totalSales money,
LastInvDate datetime,
)
-- populate the temp table with all of the inventory items
insert into #tmpArSalesItemized
select ii.itemId, ii.productLine, ip.Descr, ii.Descr, 0,0,0,0,0, NULL
from tblInItem ii, tblInProductLine ip
where ip.productLine = ii.productLine
AND ii.itemId BETWEEN @itemIdFrom AND @itemIdThru
-- update table with this years quantities
update #tmpArSalesItemized
SET QtySold = (select SUM(QtyOrdSell) from tblArHistDetail hd
where TransId IN (select TransId from tblArHistHeader where custId = @custId)
AND orderDate IN (select OrderDate from tblArHistHeader where OrderDate BETWEEN @dateFrom AND @dateThru)
AND hd.partId BETWEEN @itemIdFrom AND @itemIdThru
GROUP BY hd.partId
)
-- Return the temp tables results
select * from #tmpArSalesItemized, #tmpArCustInfo
drop table #tmpArSalesItemized, #tmpArCustInfo
return
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
My problems begin where i want to start updating all of the Qty's of the QtySold field. I have managed to get it to write the same sum in every field but i cannot figure out how to update each row based on the sum of the qty found for that item in the tblArHistDetails table, trouble is too that there is no reference to the custId in that table either. The custId resides in tblArHistHeader and is linked to the details table via the TransId column. So really i need to update many rows based on criteria from 2 other tables.
Can anyone please help? I dont have a clue how to make this work, and most of what i have learned about sql thus far has been from opening other stored procs etc in the accounting system and just reading to see how the developers have done things.
Thanks
Jamie
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have a table with single row like below
 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0Â Â Â | Value1Â Â Â | Value2Â Â Â Â | Value3Â Â Â |Â Value4Â |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
 _ _ _ _ _ _ _ _
Column1 | Value1
 _ _ _ _ _ _ _ _
Column2 | Value2
 _ _ _ _ _ _ _ _
Column3 | Value3
 _ _ _ _ _ _ _ _
Column4 | Value4
 _ _ _ _ _ _ _ _
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies View RelatedI concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
Hello All,
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part |
1 | RAM
2 | Disk Drive
10| CPU
11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive|
----------------------------------------------
A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item
SELECT SYSTEM PART
FROM System Info
WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
Any help is much appreciated!
I have the following results:
ID, Office1
1, Testing
1, Hello World
What i am trying to do is to get this result:
ID, Office1, Office2
1, Testing, Hello World
how i can accomplish this task.
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies View RelatedI have an Parent table (Parentid, LastName, FirstName) and Kids table (Parentid, KidName, Age, Grade, Gender, KidTypeID) , each parent will have multiple kids, I need the result as below:
I need results for each parent like this
ParentID, LastName, FirstName, [Kid1Name,Kid2Name,Kid3Name], [Kid1Age,Kid2Age,Kid3Age],[kid1grade,Kid2grade,Kid3grade],[kid1gender,Kid2gender,Kid3gender]
I have the following  database structure
Stock     Depth41   Depth12   Depth34
AAA Â Â Â Â Â Â 1 Â Â Â Â Â Â Â 2 Â Â Â Â Â Â Â 1
BBB Â Â Â Â Â Â 2 Â Â Â Â Â Â 2 Â Â Â Â Â Â Â 4
How can I show  Each Depth column as seperate row
AAA Â Â Â Â Â 1
AAA Â Â Â Â Â 2
AAA Â Â Â Â Â 1 Â as follows
I previously posted a problem with result set bindings but I have not been able to resolve my problem. I guess all this comes with being new to programming in this environment! Anyway, I am trying to figure out how to process from an ADO.NET connection multiple rows with multiple columns. I have to read and manipulate each row. I was originally looking at using a foreach loop but have not been able to get it to work. One reply to my previous thought I should be using a data task to accomplish this. Could someone tell me the best way to handle this situation? As a note, I am new to programming in SSIS and basically trying to learn it as I go so please bear with me! Thanks in advance!
View 1 Replies View RelatedPlease can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
ID Pat_ID
1 A
2 A
3 A
4 A
5 A
6 B
7 B
8 B
9 C
10 D
11 D
I want output for the above as:
Pat_ID ID1 ID2 ID3
A 1 2 3
A 4 5 null
B 6 7 8
C 9 null null
D 10 11 null
Please help me. Thanks!
use of Row_Number() over ( partition... but I dont understand how.
Imagine I have a table like
CustomerID, PartNum, QtyinOrder, shipped
1 6 3 0
1 6 2 0
2 6 1 0
2 5 1 0
2 5 2 0
2 5 3 0
2 5 4 1
1 6 4 1
2 6 2 1
But I wanted to return
CustomerID, PartNum, MaxQtyOrderedNotShipped
That would be just the rows
1 6 3 0
2 6 1 0
2 5 3 0
If I use this:
Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1
there is no restriction, so I get the shipped...If I alter the where clause to work only on not shipped, I get no records...as below
Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1 and shipped=0
I am creating a .aspx page that links with Miscrosoft SQL Server 2005 Express. It includes a GridView control that displays all the table data on the page. You can then select a record from the control (currently by clicking an image button to the left of each record- is there any way of selecting the record by clicking anywhere on the row? How would that be done?) and it displays the data in a detailsview control below where the data can be changed etc.
The data is like a phonebook (Name, Telephone number, and some other misc fields) and the user should be able to search by either name or number to filter out the records shown in the gridview control. I have two textboxes for this, and I started with the name text box and it works fine. i.e. with one filterparameter and one filterexpression. So that if you just enter 'Da' it filters out the records displaying only those whose name starts with 'Da'.
I have experimented but have found no way of including filter expressions to use the number as a search. I added the second filter parameter (under sqldatasource control so that:
<FilterParameters>
<asp:ControlParameter Name="DestinationName" ControlID="txtName" /><asp:ControlParameter Name="DestinationNumber" ControlID="txtNumber" />
</FilterParameters>
But I don't know what to do for the FilterExpressions. currently I just have:
FilterExpression="DestinationName LIKE '{0}%'"
i have tried using "DestinationName LIKE '{0}%' OR DestinationNumber LIKE '{0}%'" but it requires that both text boxes have data entered.
What I want is something that allows the user to enter either a name or number or both (all or part of so don't need to enter in full name/number) and it filters out the records accordingly. I.e. if you enterd 'Dav' and '079' it would bring back all the records who had a name starting with Dav and a number starting with 079. However if you enterd just 079 then it should just bring back all records with numbers starting 079 whatever their associated name.
Thanks
I have a table with a record that looks like the attached TXT.
I need to keep the most recently entered value where flag_out = 1 and delete those duplicate
records, and this should only apply to records where there's also an flag_in value of 1.
I've tried a bunch of delete statements without avail....
TIA
How can you handle multiple criteria query in T-SQL ? i wrote selection query and in my where clause i have about 7 different criteria and for some reason when i run the query i do not get any error but i do not get any data return.
So is there any other way to handle multiple criteria in T-SQL ?
Im sorry if this has been covered, I tried a search but I couldnt seem to find what I was after.
Anyway, I need an Update procedure which is actually several bunched into one. Ive had a stab at it myself, and perhaps my pseudo SQL might explain what I need..
Code Block
UPDATE [TW].[dbo].[TBLSalesPart]
SET
CASE WHEN [Part] = 'MONTV-' AND [YN] = 'False' THEN [SubCategory] = 20440 END
CASE WHEN [Part] = 'TC-' AND [YN] = 'False' THEN [SubCategory] = 20444 END
Hopefully this makes sense, cheers..
Hi.
I have this method in a class, it produces a string value based on the value of another property in the object (which represents a field in the database). I would like to turn this into a computed column in SQL server... but need help converting the formula if this is even possible. Thanks in advance.public string GetVendorEvalRating(int vendorevaltotal)
{
string vendorevalrating = "";if (vendorevaltotal >= 26)
{vendorevalrating = "Critical";
}else if ((vendorevaltotal >= 10) && (vendorevaltotal <= 25))
{vendorevalrating = "Material";
}else if ((vendorevaltotal >= 0) && (vendorevaltotal <= 9))
{vendorevalrating = "Minor";
}return vendorevalrating;
}
I am working on SQL Server in VB 2008. I have a table 'Records' having 8 columns. I have a search page where I can choose 5 different parameters to search as 'Category' , 'Name' , 'Date' etc.
I can successfully search with a single criteria selected either Category Name Or Date. But I want to create a single SQL command that can search my 'Records' table for either two or all the parameters depending on the selections made by the user.
I have two tables a and b, where I want to add columns from b to a with a criteria. The columns will be added by month criteria. There is a column in b table called stat_month which ranges from 1 (Jan) to 12 (Dec). I want to keep all the records in a, and join columns from b for each month. I do not want to loose any row from a if there is no data for that row in b.
Here is table a:
naics ust_code port all_qty_1_yr all_qty_2_yr all_val_yr all_air_val_yr all_air_wgt_yr all_ves_val_yr all_ves_wgt_yr all_cnt_val_yr all_cnt_wgt_yr all_border_val_yr
11111000 2010 2002 8070569.14298579 0 2335641254.30021 0 0 2335641254.30021 8156408492.66667 0 0 0
11111000 2230 2010 280841.478063446 0 84622385.9133129 0 0 84622385.9133129 299600780.773355 0 0 0
11111000 2410 1401 25735 0 12305667 0 0 12305667 25719794 0 0 0
[Code] ....
and here is table b:
naics ust_code port stat_month Cum_qty_1_mo Cum_qty_2_mo Cum_all_val_mo Cum_air_val_mo Cum_air_wgt_mo Cum_ves_val_mo
11111000 1220 0106 01 2 0 3440 0 0 0
11111000 1220 0107 03 14 0 3442 0 0 0
11111000 1220 0108 09 0 0 0 0 0 0
[Code] ....
I do not know how to have the multiple joins for 12 different months and what join I have to use. I used left join but still I am loosing not all but few rows in a, I would also like to know how in one script I can columns separately from stat_mont =’01’ to stat_month =’12’
/****** Script for SelectTopNRows command from SSMS ******/
SELECT a.[naics]
,a.[ust_code]
,a.[port]
,a.[all_qty_1_yr]
,a.[all_qty_2_yr]
[Code] ....
Output should have all columns from a and join columns from b when the months = '01' (for Jan) , '02' (for FEB), ...'12' (for Dec): Output table should be something like
* columns from a AND JAN_Cum_qty_1_mo JAN_Cum_qty_2_mo JAN_Cum_all_val_mo JAN_Cum_air_val_mo JAN_Cum_air_wgt_mo JAN_Cum_ves_val_mo FEB_Cum_qty_1_mo FEB_Cum_qty_2_mo FEB_Cum_all_val_mo FEB_Cum_air_val_mo FEB_Cum_air_wgt_mo FEB_Cum_ves_val_mo .....DEC_Cum_qty_1_mo DEC_Cum_qty_2_mo DEC_Cum_all_val_mo DEC_Cum_air_val_mo DEC_Cum_air_wgt_mo DEC_Cum_ves_val_mo (FROM TABLE b)
I have two tables a and b, where I want to add columns from b to a with a criteria. The columns will be added by month criteria. There is a column in b table called stat_month which ranges from 1 (Jan) to 12 (Dec). I want to keep all the records in a, and join columns from b for each month. I do not want to loose any row from a if there is no data for that row in b.
Here is table a:
CREATE TABLE #A(
naics INT,
ust_code INT,
port INT,
all_qty_1_yr FLOAT,
[Code] ....
And here is table b:
CREATE TABLE #B(
naics INT,
ust_code INT,
port INT,
stat_month INT,
Cum_qty_1_mo FLOAT,
[Code] ....
I do not know how to have the multiple joins for 12 different months and what join I have to use. I used left join but still I am loosing not all but few rows in a, I would also like to know how in one script I can columns separately from stat_mont =’01’ to stat_month =’12’
/****** Script for SelectTopNRows command from SSMS ******/
SELECT a.[naics]
,a.[ust_code]
,a.[port]
,a.[all_qty_1_yr]
,a.[all_qty_2_yr]
[Code] ....
output should have all columns from a and join columns from b when the months = '01' (for Jan) , '02' (for FEB), ...'12' (for Dec): Output table should be something like
* columns from a AND JAN_Cum_qty_1_mo JAN_Cum_qty_2_mo JAN_Cum_all_val_mo JAN_Cum_air_val_mo JAN_Cum_air_wgt_mo JAN_Cum_ves_val_mo FEB_Cum_qty_1_mo FEB_Cum_qty_2_mo FEB_Cum_all_val_mo FEB_Cum_air_val_mo FEB_Cum_air_wgt_mo FEB_Cum_ves_val_mo .....DEC_Cum_qty_1_mo DEC_Cum_qty_2_mo DEC_Cum_all_val_mo DEC_Cum_air_val_mo DEC_Cum_air_wgt_mo DEC_Cum_ves_val_mo (FROM TABLE b)