Below is my sql, i am getting error msg "Incorrect sytax near 'Votes'."
Can anyone tell me what im doin wrong?
UPDATE #TblExposure
SET E.Unity =
(
SELECT
-- DealId ,DocketId,
CASE Participant2
WHEN nullTHEN 'NA'
ELSE
CASE WHEN Participant2-Vote2 =0 THEN 'Yes'
ELSE 'No'
END
END AS Unanimous1
FROM #tblVoting
) Votes
FROM #tblExposure E INNER JOIN Votes
ONVotes.Dealid = E.Dealid
AND Votes.DocketId =E.DocketId
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Any suggestions?
Hi, I wanna know is there any advantage of perf gain when using Derived Tables over Temp Tables, advice me which one is better to use. Can I create Indexes and Insert/Update records into Derived Tables.
-Senthil
I have 3 tables TableA , TableB and TableC
I have to update tableA with the value of TableB by checking A.Field=B.Field
and TABLEB as condition that B.Field should exists in tableC
Update A Set A.Field=B.Field From tableA A
(select B.Field From TableB B where B.Field=A.Field and B.Field in (select C.Field
From tableC C))
How to do it correctly.
Thanks in advance
Hi,
I have built a database for a university project, but am having trouble with the SQL syntax for inserting derived data from a calculation into a table. At present my SQL is;
INSERT INTO MemberPayment (TotalCharge) VALUES ( [Total] )
SELECT ((MileageHistory.MileageUrban * Vehicle.EmissionsPerGramUrban) * 0.05) + ((MileageHistory.MileageCountry * Vehicle.EmissionsPerGramUrban) * 0.05) AS 'Total'
FROM [NeuCar].[dbo].[MileageHistory] JOIN [NeuCar].[dbo].[Vehicle]
ON MileageHistory.Registration = Vehicle.Registration
JOIN [NeuCar].[dbo].[Member] ON Vehicle.UserName = Member.UserName
WHERE Member.UserName = 'wenger1' AND (MileageHistory.[Date] >= CURRENT_TIMESTAMP - 30);
Would anybody be able to point out where I am going wrong? I would very much appreciate any advice,
Kind regards,
Chima
I got an error as follows:
Derived table 'A' is not updatable because a column of the derived table is derived or constant.
when I tried to run this query:
update A set MonthsUnbilled =99999888
FROM (select MonthsUnbilled from dbo.vw_MasterView
WHERE (RecordID =8377396)) A
This is a simplified query in order to pinpoint the culprit. I know I don't need to use a derived table if the real query is this simple.
Thanks in advance!
I want to rank the below table by Sum [Pts} Desc AS Position?
,Sum(Games) as Pl
,SUM(Win) as W
,SUM(Draw) as D
,SUM(Loss) as L
,SUM(F) as F
,SUM(A) as A
,SUM(Total) as Tot
,ROUND(AVG(GPG),2) AS GPG
[code].....
OBJECTIVE:THE QUERY SHOULD GIVE ME THE FIELDS I MENTIONED IN THE FIRST QUERY WITH THE CONDITIONS BELOW.
CONDITION 1: RateReview field should have yesterday's date
CONDITION 2: Email will be send to customer only once so Customer_GUID is UniqueIdentifier
CONDITION 3: Customer shouldnt' have opted to get out from receiving any email so Termination field should be NULL
ONe Customer can have many transwactions
Is there any way i write the code specifying that no email should be sent more than once evereven if customer buys 10 tickets.
Only one email sent so i need to specify that if this email has gone to particulare CUSTOMER_GUID then Ignore that record and
do not send any email. This would be done by some tool known as StrongMail.
SELECT
CAST(a.Transaction_GUID AS varchar(36)) as Transaction_GUID,
CAST(a.Customer_GUID AS varchar(36)) as Customer_GUID,
Film_id as MovieId,
First_nm as FirstName,
Last_nm as LastName,
Email_nm as EmailAddress
FROm
Table1 where RateReview_dm >= dateadd(day, datediff(day, 0, getdate()), -1) -- Greater or same as Yesterday day
and RateReview_dm < dateadd(day, datediff(day, 0, getdate()), 0) -- Less than today's date
and
and Terminate_dm is null
(I don;t know what condition to give that same customer good should not be send email again if send once)
i don't know whether i need to create a derive table or it can work without drive table
Cananyone help me with this query please
I've created this:SELECTc.ProjectID,Count(c.ID) as 'Registrants',Count(dt.Hits) as 'Submissions'FROMCME_TBL cJOIN(SELECT ProjectID, Count(*) as Hits FROM CME_TBLWHERE evalDate Is Not NULL OR testDate Is Not NULLGROUP BY ProjectID) dtON c.ProjectID = dt.ProjectIDGROUP BYc.ProjectIDORDER BYc.ProjectIDand I get this:ProjectID Registrants Submissions--------- ----------- -----------adv_104699 99adv_1047185 185adv_110566 66boh_107134 34Instead, I want this:ProjectID Registrants Submissions--------- ----------- -----------adv_104699 14adv_1047185 82adv_110566 17boh_107134 12The "ProjectID" and "Submissions" columns are produced when I run thederived table (dt, above) as a standalone query. By the same token,the "Project ID" and "Registrants" columns are produced when I run the"outer" query, above.Am I on the right track here?TIA,-- Bill
View 6 Replies View RelatedHi all,I have a table in this formatcolname1 colname2 colname3col1data1 col2data1 col3data1col1data2 col2data2 col3data2col1data3 col2data3 col3data3col1data4 col2data4 col3data4I want to display it in this formatcolname1 col1data1 col1data2 col1data3 col1data4colname2 col2data1 col2data2 col2data3 col2data4colname3 col3data1 col3data2 col3data3 col3data4Basically rotate it through 90 degrees clockwise and flip it over :)I'm pretty sure this is done by using a crosstab query and or aderived table or temp table. The problem is I use a crosstab query toget the original data into the first format. I've been strugglingtrying to get the ouptput into the second format for over a day nowand just can't seem to get it to work. Can anyone give me any pointerson the general solution to this?I hope this makes sense. Thanks for the help.
View 4 Replies View RelatedI have an application that has two different database backends, one is SQL Server Compact Edition and the other is SQL Server. The reason is because the application may run at home on one of our sales agent's computers or here in the office.
I have a query that uses a derived table and works just fine in SQL Server, however when I run it in the compact edtion (having the exact same table structures) it will not run. My question is...does the Compact Edtion or the Mobile Edition allow derived tables. If not is there a way to work around this? I will happily give an example if it will help.
Thank you,
Adam
I have some questions on derived table. Below is my situation.
Table order, there are 40 columns and it has indexes for productID and addressID
Table product, there are 15 columns and it has index for productID
Table address, there are 20 columns and it has index for addressID
Query A
-------
select C.address, C.area, B.productname, B.category, A.qty, A.price
from order A
join product B
on A.productID = B.productID
join address C
on A.addressID = C.addressID
Query B
-------
select C.address, C.area, B.productname, B.category, A.qty, A.price
from (select qty, price, productID, addressID from order) A
join (select productID, productname, category from product) B
on A.productID = B.productID
join (select addressID, address, area from address) C
on A.addressID = C.addressID
Will I loss the indexing when using derived table?
Why query B performance is much better than query A?
Thanks.
Hi All,
Can any one give me code sample which uses the recordset returned by the execution of a stored procedure as a derived table.
Thanks,
venkat.
Hi,I got another question here:I want to use query like this:SELECT * FROM (sp_lock AS T) WHERE objectID = ...The purpose is that I want to query the result set returned by sp_lockusing derived table, but it doesn't work. Why?Thanks,Baihao--Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
View 2 Replies View Related
Hi,
I am working for my client on SQL 2005 Enterprise & observed a strange behaviour. Consider a table(EMPTABLE) as below:
PK, INT
VARCHAR
EMPID
EMPNAME
1
A
2
B
3
C
4
D
5
E
6
F
7
G
8
H
9
I
10
J
Now, I wanted the 5th highest EMPID from 2 from the table. Now, we know that the SQL
SELECT TOP 6 EMPID FROM EMPTABLE WHERE EMPID >=2 should (from all other possibilities) return me the desired value as the last row of the output table. I tried to get this in a derived table & get the MAX value i.e.
SELECT MAX(EMPID) FROM
(
SELECT TOP 6 EMPID FROM EMPTABLE WHERE EMPID >=2
) der
But this returns me 10, when I would've thought 7 was the expected answer
I remodified my query as mentioned below to strangely get 7 as the result...
SELECT MAX(EMPID) FROM
(
SELECT TOP 6 EMPID FROM EMPTABLE WHERE EMPID >=2 ORDER BY EMPID ASC
) der
How did the ORDER BY hep it???
Also, if I use
SELECT MAX(EMPID) FROM
(
SELECT TOP 6 EMPID FROM EMPTABLE WHERE EMPID >2
) der
I get the same result without having to specify the ORDER BY in my derived TABLE...
I tried looking for similar threads. But nothing could explain this to me...
If anyone knows what I am not able to understand, please let me know.
Relative SQL newbie here......this is probably easy, but....Lets say I have a table (MainTable) that stores a list of input table names,a primary key (PKey), and a field called "Configured" for each one. Each ofthese input tables also contain a field called "Configured", which is set totrue or false in another process based on an OrderNumber. (So an order'sinputs are stored in several input tables, and the MainTable is a summarytable that shows which input tables have been configured for any givenOrderNumber).What I need to do is open each input table, and look for a record containinga specific OrderNumber and where Configured=true. If a record is found, Ineed to update the Configured field for that table in the MainTable, andthen move on to the next sub-table.The way I'm doing it now is with simple SQL and loops. Here is the basiccode (ASP):*****************************************OrderNumber = "562613" ' the current order that is being processed' reset all configured flagssql = "UPDATE MainTable SET Configured = 0"conn.execute sql, , &H00000080' get list of all tablenamessql = "SELECT InputTableName, PKey FROM MainTable WHERE InputTableName <>'---'"set rsTableNames = conn.execute(sql)while not rsTableNames.eof' test each input table for configured flagsql = "SELECT Configured FROM " & rsTableNames("InputTableName")& _" WHERE Configured = 1 AND OrderNumber = '" & OrderNumber &"'"set rs = conn.execute(sql)If Not rs.EOF Then' update the main tablesql = "UPDATE MainTable SET Configured = 1 WHERE PKey='" &rsTableNames("PrimaryKey") & "'"conn.execute sql, , &H00000080end ifset rs = nothingrsTableNames.movenextwend*****************************************There has to be a faster way.. I think.... maybe something that could bewritten as a stored procedure? I use a similar technique in a couple ofother places and it's a bit of a performance hit, especially as the numberof input tables grows.TIA!Calan
View 6 Replies View RelatedDear friends, can anyone please guide me on how to update table with results from derived column tool?
thanks,
I'm trying not to use a temp table, but i may have to do so..
I'm using sql2005 for this case.
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something. If I've aliased it as 'results', is there a way to alias results again as something else? or maybe a trick with CTEs? I will try that! It seems promising.
I'm trying not to use a temp table, but i may have to do so..
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something.
In my TSQL code i use a derived table to extract the value of account 321 to compare if they are the same that the SUM of my line invoice cost multiply by quantity line : Sum(fi.ecusto*qtt)
This is my script:
SELECT ft.ndoc [Doctype],ft.fno [Docnr] , Sum(fi.ecusto*qtt) [totalcostof my Invoiceline], xctb.conta [accountancy account],
sum(Case when ft.tipodoc = 1 then Xctb.ecre else Xctb.edeb end) as [Value of Cost of invoice in accountancy],
[DIF] = Sum(fi.ecusto*qtt) - Sum(Case when ft.tipodoc = 1 then xctb.ecre else xctb.edeb end)
[Code] ....
My problem is if i have more than on line on my invoice, for example 2 lines, the value of column [Value of Cost of invoice in accountancy] are duplicated, for 3 line invoice the value are multiply by 3.
When my colleague makes any change to a query containing a derived table, the word 'WITH' followed by a lot of graphical characters appears after the alias, rendering the query unusable. We have tried this with various existing and new, simple queries, all to no avail. We are editing the queries in Visual Studio 2003, and he does not get this effect when using Visual Studio 2005. I can edit the query in 2003 on my laptop with no ill effects.
Help!
Karen
I have discovered what looks like a bug in the optimiser. I've posted it at https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=288243 but I wonder if any of you with SQL 2005 RTM, 2005 SP1 or 2008 CTP could confirm when this was introduced and whether it is still an issue?
Code Snippet
-- Bug report
-- 2007/07/19
-- Alasdair Cunningham-Smith
-- alasdair at acs-solutions dot co dot uk
set nocount on
go
-- example date in in British date format
set dateformat dmy
go
use tempdb
go
create table foo( bar varchar( 30 ) not null )
go
insert into foo( bar ) values ( 'fishy' )
insert into foo( bar ) values ( '19/07/2007' )
go
-- this works fine in all versions - only valid dates are passed to the convert function
select
convert( smalldatetime, bar, 103 ) as bardate
from
foo
where
bar like '__/__/____'
go
-- this works on SQL 2000, but fails on SQL 2005 SP2 (I've not tried other SPs of SQL 2005):
-- Msg 295, Level 16, State 3, Line 2
-- Conversion failed when converting character string to smalldatetime data type.
--
-- I believe the query is rewritten as if the derived table query contained
-- "and convert( smalldatetime, bar, 103 ) < getdate()"
-- which would expose the convert to the invalid data
select
*
from
(
select
convert( smalldatetime, bar, 103 ) as bardate
from
foo
where
bar like '__/__/____'
) as derived
where
bardate < getdate()
go
-- Workaround:
-- Use a case statement to protect the convert operator from the invalid data
select
*
from
(
select
case when bar like '__/__/____' then
convert( smalldatetime, bar, 103 )
else
null
end as bardate
from
foo
where
bar like '__/__/____'
) as derived
where
bardate < getdate()
go
drop table foo
go
The workaround I discovered is simple but ugly. I invite your comments...
alasdair.
how to declare multiple derived columns in SSIS Derived Column Task in one attempt.as i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.
View 4 Replies View RelatedHello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
I am looking for the best way in SSIS to do the following. I have an SQL table that for each row in the table I want to take an element from the table do a lookup in a Teredata Table, return information from the teredata source. Use that returned data to do some calculations and create a derived column from my calculations and place the data into the same SQL table that I am parsing through.
Ideas?
Hi All,
I have a Problem while updating one table data from another table's data using sql server 2000.
I have 2 tables named TableA(PID,SID,MinForms) , TableB(PID,SID,MinForms)
I need to update TableA with TableB's data using a single query that i have including in a stored procedure.
If the id1 will change in table1 it should also change the corresponding id1 field in table2 it does not do anything.
CREATE TRIGGER [dbo].[IDCHANGE]
ON [dbo].[table1]
AFTER UPDATE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
We have two tables with names X and Y.
X has a,b columns. And Y has c,d columns.
I want to update b column in X table with the values from d column in Y table on condition X.a=Y.c.
Hi
Im trying to create an update statement which references two tables (join) and has a CASE clause attached. Not sure where im going wrong...
Using T-sql!!!
update import set import.gone =
from import
inner join stat
ON stat.id = import.id
CASE
WHEN stat.A = import.field2 THEN import.gone = sec.A
WHEN stat.B = import.field2 THEN import.gone = sec.B
WHEN stat.C = import.field2 THEN import.gone = sec.C
WHEN stat.D = import.field2 THEN import.gone = sec.D
WHEN stat.E = import.field2 THEN import.gone = sec.E
WHEN stat.F = import.field2 THEN import.gone = sec.F
ELSE import.gone = null
END
Any help would be greatly appreciated
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master
UPDATE [dbname].dbo.table
SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1
WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2
AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3
AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
What is wrong?
I want to write trigger code to update values in table1 to table2.
ALTER, CREATE, DROP cannot be used in a trigger, I guess.
Tabel1
ID, Name, Asset, Date, Active
---------------------------------
1, A, 10 , 01/08/04 Y
1, B, 16 , 06/08/04 Y
1, C, 12 , 07/08/04 Y
1, D, 13 , 10/08/04 Y
2, E, 10 , 15/08/04 Y
2, F, 11 , 16/08/04 Y
2, Y, 12 , 01/08/04 N
2, G, 15 , 17/08/04 Y
3, H, 13 , 19/08/04 Y
3, I, 15 , 02/08/04 N
Table2 after update
ID, Name1, Asset1, Date1, Name2, Asset2, Date2, Name3, Asset3, Date3, Name4, Asset4, Date4
---------------------------------
1,B,16,06/08/04,D,13,10/08/04,C,12,07/08/04,A,10,01/08/04
2,F,11,16/08/04,E,10,15/08/04,blank,blank, blank..
3,H,13,19/08/04,blank, blank...
As you can see, code must select only active('Y') names in table1 arrange in descending order of asset for each ID and updates(or insert into?)table2.
Please help me with code
How do I update a table from another table which resides in a different database but on the same server. Example Update table a which is in database 1 from table b which is database 2. Please help I need this as soon as possible. Thanks in advance to anyone who can help.
View 3 Replies View Relatedi have 3 following tables
Accidents, Vehicles, Casualties. the relationship is many vehicles to an accident and many casualties to a an accident.
I have one new table which will contain all the vehicles related to all accidents. however i want to be able put in all casualties that every vehicle is related to..so within the new table, there are three severities of casualties
Vehicledetails
column severity1 severity2 severity3
For every vehicle where there is 0 or more casualties I want to be able put a (total )number for each category of casualty( severity in the VehicleDeatils table ) into the columns in vehicledriverdetails
how can i do this?? i dont want ot have to manually update every single entry one by one...