Upgrade And Now Mail Doesn`t Work
Sep 4, 1998
Hello, I upgraded to Beta 3 and now mail isn`t working(I hate mail!) I found 2 error messages. One when trying to add an operators email id and the other when I try to "test" mail under server properties.
- Unable to start a mail session on the server with this mail profile.
- no mail profile defined.
The account that I am using is used for all our SQL Servers and was working on this server on 6.5 before the upgrade. I have checked the new SQLServerAgent service and it`s using the correct account.
Any help would be appreciated.
And to all you that are off for a long Labor Day weekend...I`m jealous!
View 1 Replies
ADVERTISEMENT
Nov 21, 2007
I am having trouble getting database mail to work. I have tried many things, but can't make it work.
Initially, I setup IIS opn the same box as a virtual SMTP server. I set it up to relay to 127.0.0.1. In sql server, I setup database mail
to point to localhost, with no authentication. After the setup, when I test the email it works fine.
I created a job that will fail every time. I setup myself as the notify party on the job. When I run the job, it fails.
I get no email. The job log has the following error (notice failed to notify):
Message
The job failed. The Job was invoked by User xxxxAdministrator.
The last step to run was step 1 (test 1).
NOTE: Failed to notify 'Dan Jones' via email.
In the SQL Server log, I see:
[264] An attempt was made to send an email when no email session has been established
Also:
Message
[260] Unable to start mail session (reason: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException: Mail configuration information could not be read from the database. ---> System.Data.SqlClient.SqlException: profile name is not valid
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
a)
This is my preferred configuration, but I couldn;t make it work, so I tried another...
I tried to setup mail through my mail service provider. I entered the IP in sql server. When I test it, I get the following error:
Date 11/19/2007 8:16:06 AM
Log Database Mail (Database Mail Log)
Log ID 24
Process ID 3176
Last Modified 11/19/2007 8:16:06 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
On the same box, I used telnet to step through thge SMPT mail send process. It worked fine, indicating no firwewall, router or other issues.
I am of the opinion that Database mail is defective. This post is similar to another I have done, but no usefull responses have been made.
I am hoping that sonmeone will provide some useful information here
This is running on Windows 2003 Standard, and on SQL Server workgroup edition.
I have a second backup server similary configured that behaves exactly the same.
View 10 Replies
View Related
Sep 5, 2000
Hi All,
I just upgraded my servers from 6.5 to 7.0,
however, all the transfer jobs that was using xfragent.exe
does not work anymore. Any idea? Please help.
Thanks,
Richard
View 1 Replies
View Related
May 5, 2006
Upgraded SQL Server 2005 x64 to Service Pack 1 expressly for the purpose of enabling Database Mail from SQL Job, which was a known bug that was listed as fixed in this Service Pack. It still does not work; in fact after installing SP1 on an x86 SQL Server Standard, Database Mail does not work from there now either, although it did prior to the upgrade! I am using Integrated Security.
Error message received: The job succeeded. The Job was invoked by User <name>. The last step to run was step 1 (Select). NOTE: Failed to notify 'Mike Schelstrate' via email.
Message in Error Log: [264] An attempt was made to send an email when no email session has been established.
Send test Email does work on both Servers.
Here is another Error message I found in the SQL Error Logs: [298] SQLServer Error: 2812, Could not find stored procedure 'msdb.dbo.xp_sqlagent_notify'. [SQLSTATE 42000] (DisableAgentXPs). Looks like this may be the root of the problem because it does not exist, I checked. How do I obtain this missing extended stored procedure?
View 9 Replies
View Related
Sep 15, 2005
I'm pretty new to DTS, so forgive me if this is basic. I created a simple DTS package to run a query and export it to a text file. I can execute the package fine from my workstation through EM, but when I try to execute the job to run the package I get this error:
Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied.
I think that maybe SQL Agent doesn't have the right permissions to write to that network drive. What should the permissions be?
View 3 Replies
View Related
Nov 10, 2004
This is probably very simple, but I can't get passed this problem.
I have a report in MS Access that uses info generated by a query. One of the text fields in the query contains either the word 'Select' or the name of a course.
The report should display a space if the value is 'Select', or the actual value of the field in any other case. The field can never contain a null value.
I've used:
=IIf([optVoc1]="Select","",[optVoc1])
in the text box on the report, but this only returns #error regardless of the actual content of the field.
What am I doing wrong?
Regards,
BD
View 5 Replies
View Related
Aug 27, 2004
Hi all,
I create and schedule a SQL job to run every minute to update a table base on certain condition but it doesn't work. Job history says successful every time but the table doesn't get updated.
However if I move it to Query Analyzer and run it under dba, it will work. Thinking that it may have to do with the user the job run as, I then change run as user from self to dba. But still SQL job won't update my table.
Anything about user permission or security that I can check? Or it there any other possibility?
TIA
View 1 Replies
View Related
Apr 26, 2007
When I run the select its fine but I cannot delete..... i have done this many times and it has worked.... I cannot see the error what am i missing
select
eqnow.empnumber,
eqnow_names.empnumber,
eqnow_names.names
--delete
from
eqnow
inner join eqnow_names
on eqnow.empnumber = eqnow_names.empnumber
where
eqnow_names.names is null
i get this error
Server: Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'inner'.
View 3 Replies
View Related
Oct 21, 2007
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'user instances enabled' does not exist, or it may be an advanced option.
Valid configuration options are
View 1 Replies
View Related
Apr 19, 2008
Hi to all, I'm building (and learn) an application with VB Express. In "edit dataset with designer" I've build this sql query:
SELECT tbl_soggetto.[ID Soggetto], tbl_soggetto_tipo.Tipo, tbl_soggetto.[Cognome/Denominazione], tbl_soggetto.Nome, tbl_soggetto.Indirizzo, tbl_soggetto.CAP, tbl_soggetto.Città , tbl_soggetto.Provincia, tbl_soggetto.[Telefono 1], tbl_soggetto.[Telefono 2], tbl_soggetto.[Telefono 3], tbl_soggetto.[Telefono 4], tbl_soggetto.[eM@il 1], tbl_soggetto.[eM@il 2], tbl_soggetto.Note
FROM tbl_soggetto INNER JOIN tbl_soggetto_tipo ON tbl_soggetto.[ID Tipo] = tbl_soggetto_tipo.[ID Tipo]
WHERE (tbl_soggetto.[Cognome/Denominazione] LIKE '%' + @Testo + '%')
The LIKE doesn't work!
I call the query with Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome(Me.txt_trova.Text.Trim)
But with LIKE '%ABC%' work!
Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome()
Someone can help me? Thanks...
View 12 Replies
View Related
Dec 11, 2006
When I try to install the problem I get the following error.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The log tells me nothing useful. I can't start the thing manually because after clicking cancel on the error message, the installer proceeds to roll back the installation.
How do I fix this problem?
View 3 Replies
View Related
Jun 8, 2005
This is the autogenerated code from the SelectCommand of my DataAdapter, except the red text. This DataAdapter is used to fill a DataGrid. What I want to do, is to calculate the total memory (4 slots) / PC.This code makes the sum of all memory of all PC's together.I'm not sure if the group by clause is needed here ...Me.OleDbSelectCommand1.CommandText = "SELECT PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type AS Case_Type, Processor_T" & _"ype.Type AS Processor_Type, Processor_Snelheid.Snelheid AS Processor_Snelheid, " & _"(SELECT SUM(Memory) FROM Memory, PC, RAM WHERE RAM.PcID = PC.ID AND RAM.GrootteID = Memory.ID)" & _"AS Memory, OS.Naam AS OS, OS_SP.Nummer AS OS_SP, Gebru" & _"iker.Naam AS Gebruiker_Naam, Status.Status, PC.Tagged FROM (Status RIGHT OUTER J" & _"OIN ((((((((PC LEFT OUTER JOIN (RAM LEFT OUTER JOIN Geheugen ON RAM.GrootteID = " & _"Geheugen.ID) ON PC.ID = RAM.PcID) LEFT OUTER JOIN Case_Type ON PC.Case_TypeID = " & _"Case_Type.ID) LEFT OUTER JOIN OS_SP ON PC.OS_SpID = OS_SP.ID) LEFT OUTER JOIN Ge" & _"bruiker ON PC.GebruikersID = Gebruiker.ID) LEFT OUTER JOIN Processor_Snelheid ON" & _" PC.Processor_SnelheidID = Processor_Snelheid.ID) LEFT OUTER JOIN Processor_Type" & _" ON PC.Processor_TypeID = Processor_Type.ID) LEFT OUTER JOIN OS ON PC.OsID = OS." & _"ID) LEFT OUTER JOIN Switchbox_Details ON PC.ID = Switchbox_Details.PcID) ON Stat" & _"us.ID = PC.StatusID) GROUP BY PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type, " & _"Processor_Type.Type, Processor_Snelheid.Snelheid, OS.Naam, OS_" & _"SP.Nummer, Gebruiker.Naam, Status.Status, PC.Tagged"I would like to know how to calculate the total memory for each separate PC.Hope you can help me.
View 5 Replies
View Related
Sep 20, 2000
I had a SQL Server falure. I rebiuld Master and tried to attach my database
with sp_attach_db? but get an error
Location: pageref.cpp:3931
Expression: rowLog.RowCount () == 1 || pPage->IsEmpty ()
SPID: 10
Process ID: 119
Connection Broken
View 1 Replies
View Related
Mar 1, 2001
I try to copy a DB from one server to another. On the target server an older version of the DB has been deleted and I now try to attach the new version using "sp_attach_db DBname, Filelocation", but I always get an error "Device Activation error. The physical file name 'D:mssql7dataAgency_log.ldf' may be incorrect"
"Database 'Agency' cannot be Created"
To me it seems that the database is looking for the log files (now deleted).
I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create a new database and replace the mdf file, but nothing works.
View 3 Replies
View Related
Mar 31, 2003
Hi,
I wanted to create a new trigger, but Enterprise Manager tells me about an "Incorrect syntax near @UpdatedByID, line 28". I double-checked everything, but it still does not work :mad: .
Any hints :confused: ?
TIA,
-Gernot
Here is the statement (line 28 is marked with ***):
CREATE TRIGGER TransferToABII ON [dbo].[CALGeneral]
FOR INSERT
AS
BEGIN TRANSACTION
BEGIN
DECLARE @Event varchar(255),
@BBaseUID int,
@StartDate smalldatetime,
@EndDate smalldatetime,
@Details varchar(255),
@AddressID int,
@ProjectID int,
@UpdatedByID int,
@ActID int,
@EventID int
SELECT @Event = Event,
@BBaseUID = BBaseUID,
@StartDate = StartDate,
@EndDate = EndDate,
@Details = Details,
@AddressID = AddressID,
@UpdatedByID = UpdatedBy,
@ProjectID = ProjectID
FROM INSERTED
BEGIN
EXEC BrainBase.dbo.BB_NEW_CREATE_NoteTask_Ret *** (@UpdatedByID,
@AddressID,
@ProjectID,
@BBaseUID,
@StartDate,
GetDate(),
@Event,
NULL,
NULL,
NULL,
NULL,
@Details text,
@ActID = @ActID OUTPUT,
@EventID = @EventID OUTPUT)
END
BEGIN
UPDATE CALGeneral SET ActID = @ActID WHERE ID = INSERTED.ID
END
END
IF @@ERROR <> 0
BEGIN
RAISERROR('Error occured',16,1)
ROLLBACK TRANSACTION
END
COMMIT TRANSACTION
View 4 Replies
View Related
Nov 11, 1999
I'm working with mssql 6.5
I have an primary key column with Identity property.
And at the moment server doesn't insert the proper value to this column.
Error message is following
Msg 2601, Level 14, State 3
Attempt to insert duplicate key row in object 'Spot' with unique index 'XPKSpot'
Command has been aborted.
The datatype of this column is int, and number of rows ~17000.
If I execute select @@identity it returns null.
View 4 Replies
View Related
Aug 2, 2004
I'm combining first name, last name, middle name, and an ID number together into an alias. Then I need to match that alias with a variable passed to the page (its a search results page). The problem is it claims that there is no table with the name of my alias. Anyone know what I'm doing wrong?
A mockup of the SQL looks like this:
SELECT UserID, Last_Name + ', ' + First_Name + ' ' + Middle_Name + '.' AS name
FROM Table
WHERE name LIKE 'variable%'
Everything looks right with the results, if I take out the WHERE clause it has name displayed properly and joined together with the rest of the data in the results properly.
Thanks in advance for any help that can be provided!
View 3 Replies
View Related
Oct 12, 2007
I have a query that doesn't work when i use 4 name convention instead of a openquery. The msg is below. Anyone know what is going on?
Both queries are the same but one doesn't work.
-- works
SELECT TOP 1 * FROM OPENQUERY(AS400_PROD, 'SELECT * FROM PPTREASUSA.ORDDET')
-- doesnt work
SELECT TOP 1 * FROM AS400_PROD.S1030Y3M.PPTREASUSA.ORDDET
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: Unspecified error]
[OLE/DB provider returned message: [IBM][iSeries Access ODBC Driver][DB2 UDB]CPF5715 - File ORDDET01 in library QTEMP not found.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBSchemaRowset::GetRowset returned 0x80004005: ].
http://www.sqlserverstudy.com
View 2 Replies
View Related
Jan 17, 2008
hi all,
i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Exams',
@recipients = 'me@domain.com',
@Body_format = 'HTML' ,
@subject = 'Room Preparation' ,
@body='hi there';
so can anyone help with this issue
thanks in advance
View 6 Replies
View Related
Feb 7, 2007
I have a drill through that passes four parameters. Three are passed from the current selections in that reports parameters and the fourth needs to be the customer name they click on in the body of the report so it's passed as Fields!fieldname.Value. When I click on the customer name, the drillthough fires but the report simply doesn't load. If I remove the parameter from the field clicked on and just pass the three parameters, it goes to the drill through correctly and that fourth parameter just sets to the default for that parameter in that report.
I can then simply check that parameter and select the value from the list that is exactly the same as the value I was attempting to pass it in the drill through and report refreshes correctly.
Whatever it is, is something in the manner that the value is passed in the drill through specifically.
Any ideas?
View 1 Replies
View Related
Mar 15, 2007
Hello,
I've rescued a MDF and LDF files off a client's old server, and I wanted to attach it to our own, but I can't seem to get the command to work, basically I have these two files, which I've dropped on our server:
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.LDF
So when I do a
SP_ATTACH_SINGLE_FILE_DB 'somedb','C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF'
It says the LDF path my be incorrect, and that there's two other files that are missing:
MYCLIENTNAME_LOG (no extension)
extra_log (no extension)
I thought the whole point of the command is that you only need a single file?
Its very hard to go back to the client's old server and try to find these two files, and it doesn't really matter if we loose a bit of data, so long as the bulk of it is available.
Update: I think I've found the answer...its not possible to do this, it really needs all the log files.
Any workarounds?
View 1 Replies
View Related
Jun 25, 2007
This works:
-- authenticator
CREATE FUNCTION [dbo].[cc2_Helper]( @SecretData VARBINARY(256), @cId INT )
RETURNS NVARCHAR(50)
WITH EXECUTE AS 'DBO'
AS
BEGIN
RETURN convert( NVARCHAR(50), decryptbykeyautocert( cert_id( 'cert_SecretTable_SecretData_Key' ), null, @SecretData, 1, convert(varbinary, @cId) ) )
END
go
CREATE VIEW [dbo].[cc2View2]
AS
SELECT CardID as CardID, [dbo].[cc2_Helper](CardNumber, CardID) as CardNumber FROM [dbo].[cc2]
go
GRANT SELECT ON [dbo].[cc2View2] TO [user_low_priv]
This doesn't:
-- auth2/view3
CREATE FUNCTION [dbo].[cc2_Helper2]( @SecretData VARBINARY(256), @vBin VARBINARY )
RETURNS NVARCHAR(50)
WITH EXECUTE AS 'DBO'
AS
BEGIN
RETURN convert( NVARCHAR(50), decryptbykeyautocert( cert_id( 'cert_SecretTable_SecretData_Key' ), null, @SecretData, 1, @vBin ) )
END
go
CREATE VIEW [dbo].[cc2View3]
AS
SELECT CardID as CardID, [dbo].[cc2_Helper2](CardNumber, convert(varbinary, CardID)) as CardNumber FROM [dbo].[cc2]
go
GRANT SELECT ON [dbo].[cc2View3] TO [user_low_priv]
WHY? Note that the conversion to VARBINARY was moved from the call to DecryptByKeyAutoCert to the call to cc2_Helper2. That is the only change...
But if I declare @vBin as VARBINARY(256) then it does work! Guess I'm a little confused on declaring vars...anyone can elucidate? Thanks.
View 1 Replies
View Related
Jul 28, 2007
I have a number of jobs which in step one create a flat file from my databases using an expression to insert the date (yyyy-mm-dd) within the file name. I am then in step two using send mail to send those files to my users, again using an expression to reference the attached file.
When the first step's file is already created and I'm overwriting, the job runs fine either manually within Business Studio or as a scheduled job via SQL Agent. But when the files are being created in step one, the job fails validation with the message that the send mail file attachment doesn't exist! SSIS doesn't seem to recognize that the file is being created in the prior step. Could this be true? Or is there some other problem that I'm missing?
View 2 Replies
View Related
Dec 25, 2005
In the Data Source Wizard the "insert,delete,update" advanced options are greyed out.
The table's PK is not an identity, but a uniqueidentifier.
View 2 Replies
View Related
Jan 16, 2006
I have been looking at this for over a day now. I cannot see why this procedure does not work, its so simple.
No matter what happens it always returns 0. If it locates a record, it doesnt update it, yet it still returns 0.
It should not be returning 0 if its not updating so I can't figure out why it does.
Why does this always return 0?
[pre]Create Procedure CreateNewCategory @title nvarchar(100), @description nvarchar(1000), @displayOrder intAS DECLARE @Result as int
IF EXISTS(SELECT categoryTitle FROM categories WHERE categoryTitle = @title) BEGIN SELECT @Result = 1 ENDELSE BEGIN INSERT INTO categories(categoryTitle, categoryDescription, displayOrder) VALUES(@title, @description, @displayOrder) /* If no error was encountered, 0 will be returned. */ SELECT @Result = @@Error ENDGO[/pre]
Thanks!
View 2 Replies
View Related
Mar 28, 2000
Since I have to go across the network, I'm trying to use the UNC. However, this won't even work when I'm using the UNC to point to the server on which this is run. I'm trying to restore a single table on 6.5. What is the obvious piece that I'm missing?
This works.
LOAD TABLE address
FROM DISK = 'd:MSSQLackupDBBackup.DAT'
WITH source='address'
This doesn't.
LOAD TABLE address
FROM DISK = 'server1d$MSSQLackupDBBackup.DAT'
WITH source='address'
View 2 Replies
View Related
Jan 18, 2006
Hi all, I have a problem with this trigger. It seams to be very simple, but it doesn't work...
I created a trigger on a table and I would want that this one updates a field of a table on a diffrent DB (Intranet). When I test it normally (a real situation), it doesn't work, but when I do an explicit update ("UPDATE AccesCard SET LastMove = getDate();" by example) it works.
If anyone could help me, I would appreciate.
NB: Is there a special way, in a trigger, to update a table when the table to update is on another BD ?
Francois
This is the trigger:
------------------------------------------------------------
ALTER TRIGGER UStatus
ON AccesCard
AFTER UPDATE, INSERT
AS
DECLARE @noPerson int
SET NOCOUNT OFF
IF UPDATE(LastMove)
BEGIN
SELECT @noPerson = Person FROM INSERTED
UPDATE Intranet.dbo._Users SET Intranet.dbo._Users.status = 1 WHERE personNo = @noPerson;
END
SET NOCOUNT ON
View 5 Replies
View Related
Nov 24, 2006
I have the following situation: A webserver in a DMZ which connects to a DbServer in a Domain.
but when I try to make a ODBC connection on the webserver I get the well-known "Server does not exist or access denied" error.
I tried using IP address as well as FQDN. I turned off the firewall in the router (I'm able to access shares and what not from the webserver so the firewall is really turned off).
I think however i have narrowed down the problem to the TCP/IP connection of the SQL Server. Normally when you try from a command prompt
"telnet dbserver 1433" you get a connection. But when I try this to the specific DbServer I get an "unable to connect" error. Even when I try it on the dbserver itself (so telnet localhost 1433). This should work always?
In the network configuration of the sql server the Named Piped as well as the TCP/IP protocols are enabled. TCP/IP is offcourse configured on port 1433.
How can I fix this problem?
View 2 Replies
View Related
Feb 17, 2004
Hi again, all...here I am again, trying to work on my CloseIndex thang again...Same subject, different tack...
Basically, I have two tables...for the sake of simplicity, let me define them as:
PortfolioIndex
PortfolioID int
CreateDate smalldatetime
CloseIndex float
PortfolioPerformance
PortfolioID int
CreateDate smalldatetime
PrevDate smalldatetime
DailyPerChg float
UPDATE PortfolioIndex
SET CloseIndex = CASE
WHEN PPI.CloseIndex IS NULL THEN 100.00
ELSE (PPI.CloseIndex + (PPI.CloseIndex * PP.DailyPerChg / 100))
END
FROM PortfolioIndex AS P INNER JOIN PortfolioIndex AS PPI on (P.PortfolioID = PPI.PortfolioID), PortfolioPerformance AS PP
WHERE (P.PortfolioID = PP.PortfolioID) AND
((P.CreateDate = PP.CreateDate) AND
(P.CreateDate = @CreateDate) AND
(PPI.CreateDate = PP.PrevDate))
What I am trying to do is...get the previous day's portfolioIndex row's CloseIndex and create a new one for today's row.
As ugly as it is, it works when I execute it in the SQL Query Analyzer, but when I try to create the stored procedure, the syntax check complains that the PortfolioIndex reference at the UPDATE... part is AMBIGUOUS...yet when I define it in the SP as P.PortfolioIndex, it fails at run time saying there is no object named P.PortfolioIndex (well, of course there isn't!).
How can I make this work (and if possible, make it prettier too! *L* ;) )
View 7 Replies
View Related
Mar 16, 2015
I am using BCP utility to export data from a view to text file. I get the following error
"Copy direction must be either r 'in', 'out' ..." when I execute the following
exec master..xp_cmdshell 'bcp [Salesforce_Prod].[dbo].[Project With Opps] out c: est99.txt -c -t, -T -S'
The same thing work if I replace the view in the statement above with a table name.
View 3 Replies
View Related
Aug 12, 2005
Bob writes "Your FAQ asks an intersting question:
Why doesn't SELECT @columns FROM @tablname work?
No answer is provided however.
I need to write a stored procedure the passes in a fieldname, retrives next key type int data from that field, increments the field, and returns the NextKey.
Would be nice if something like this worked:
DECLARE @iNext INT
SELECT @iNext = SELECT @columnName FROM Next_Keys WHERE ID = 1
SELECT @iNext = @iNext +1
UPDATE Next_Keys Set @columnName = @iNext WHERE ID = 1
RETURN @iNext
SQL Server 2000 - Win Server 2003
Editing SP from VS2005
TSQL newbe writing first sp"
View 1 Replies
View Related
Apr 20, 2007
***Disclaimer***
This is homework, just need a hint.
I compare this to other scripts and can't find any differences. I'm getting a syntax error:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near '('.
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near '('.
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near '('.
Any hints would be great! Thanks.
USE StateUBookstore
ALTER TABLE dbo.Classes
ADD( InstructorID char (5) NOT NULL,
Credits int NOT NULL);
GO
ALTER TABLE dbo.Students
ADD( PhoneNO char(14) NULL,
Email char (50) NULL),
DROP COLUMN BookStoreEmp;
GO
ALTER TABLE dbo.Enrollment
ADD( Semester int NOT NULL,
EndDate DateTime NOT NULL);
View 13 Replies
View Related
Aug 22, 2007
I setup a maintenance plan in SQL and added some vbscript codes. One line is just wscript.sleep 10000. When I tried to run the job, I received error description: variable is undefined: 'wscript'
What's up with SQL?
View 1 Replies
View Related
