Upgraded To SQL 7 And A Month Later System Went Back To 6.5 ???
Mar 14, 2000
Hi,
I did a same server upgrade from SQL 6.5 to 7.0 about a month ago. I never deleted the old 6.5 installation/databases. Yesterday, for some reason SQL 7.0 wouldn't start. When I looked at SQL 6.5 enterprise manager, it showed that 6.5 was started. So I stopped it. I tried to start 7.0 back up and it would just start 6.5. I tried a reboot... that didn't work. Then I uninstalled 6.5, rebooted, and SQL 7.0 finally came up. I check the error logs and it showed that there was a "short stack dump" (details below)
Would a "stack dump" have caused sql to revert back to 6.5?
Thanks,
LC
Dump thread - spid = 10, PSS = 0x3505b4b4, EC = 0x3505b664
Stack Dump being sent to e:MSSQL7logSQL00003.dmp
************************************************** *****************************
*
* BEGIN STACK DUMP:
* 03/13/00 15:07:33 spid 10
*
* Input Buffer 66 bytes -
* SELECT category FROM z_guarantees WHERE z_guarantees.code ='GGTD'
*
************************************************** *****************************
-------------------------------------------------------------------------------
Short Stack Dump
0x77f67a2b Module(ntdll+7a2b) (ZwGetContextThread+b)
0x0077fc6b Module(sqlservr+37fc6b) (utassert_fail+1a0)
0x005b0ebe Module(sqlservr+1b0ebe) (XCB::Rollback+4a)
0x005aa843 Module(sqlservr+1aa843) (bds_defect_xact+84)
0x0051abea Module(sqlservr+11abea) (clean_process+200)
0x005b22fd Module(sqlservr+1b22fd) (language_exec+5f9)
0x4106135c Module(opends60+135c) (execute_event+659)
0x4106164b Module(opends60+164b) (process_commands+f3)
0x4109285a Module(ums+285a) (ProcessWorkRequests+ed)
0x41092d28 Module(ums+2d28) (ThreadStartRoutine+139)
0x7800bee4 Module(MSVCRT+bee4) (beginthread+ce)
0x77f04ee8 Module(KERNEL32+4ee8) (lstrcmpiW+be)
2000-03-13 15:07:34.09 spid10 CImageHelper::GetSym Error - The specified module could not be found.
Hi all, I'm running SQL 7.0. Due to large tables, the space on the SQL server was getting filled up. So i truncated some tables. Now even though the SQL dbase shows 3Gb free, the HDD shows only 150 MB free. How do i get SQL 7.0 to release the sapce back to HDD?
I am wondering if we could back up the databases to any place outside of the local server system? As I found, we can only back up the database to the local server system, so we have needs to share databases on network places. Is there any method to back up the database on network place rather than first of all I have to back up the database on a local server system, then copy it to the network place, that just sounds really inconvenient.
Thanks a lot in advance for your help and I am looking forward to hearing from you shortly.
Summary: Started replication April 1 of 4M xact / day publishing system to subscribing system.
Performance was good. Latency was ~ 5-7 seconds.
May 10 we noticed that the DB was behind (latency was 12 hours).
All performance counters seem good with the exception of the disk.
. Performance spikes are 8 minutes apart and last from 30 - 60 seconds.
. During this period, Disk % Busy (1 - Disk % Idle) is 100%
The publisher DB publishes about 50-52 xacts/sec.
Rate of distribution (distribution DB to Subscriber DB) is ~ 47 xacts / second, so latency is increasing (currently at 33 hours). Previously my Subscriber system's "capacity" was 150 xacts / sec.
I know this because several weeks ago, the network went down, we were 24 hours behind.
When the network came back up the replication subscriber system was able to catchup at around 150 xacts / sec, or 3X the production system rate.
What has changed between then and now? Not much. We did install Tivoli Service Manager (IBM's backup system) a couple of weeks ago. It seems to run fine on a nightly basis, but I don't see any periodic heavy Disk I/O from that. Just to be sure, I've had them shut the TSM services down just to be sure.
We've also eliminated all extraneous processes other than those I need for performance monitoring (there was a RTVscan, virus scan process).
I've eliminated Autogrowth's as an issue as I've bumped the growth so that they are very infrequent (several days at this point. When we resolve the problem, I'll dial this down to something more reasonable.
My disk configuration is not ideal I realize (single Raid-5 disk with 3 partitions), however, this has not changed in the 6 weeks.
Thanks for any help on this!
Jack Griffith
Configuration:
Subscribing System:
SQL Server: 2000, SP4 - 8.0.2039
CPU - 2.8GHZ Xeon, Quad Dual-core
Memory - 3.5GB RAM
Disk: 3 partitions on a single RAID-5 disk with 1118 GB of space:
C: 39GB System and Programs
D: 97GB Log space
E: 982 GB Data space
Replication configuration:
- nosynch, continuous Transactional Replication - Distribution db is on Subscription system - distribution - Publication of approx. 50 transactions / second
Subscriber DB configuration: DB size: 64458 MB Logging: Simple (at this point)
Hello what I'd like to display the following in a matrix report:
Parameter selected: 3 (March), 2008 (Year)
Monthly TO Summed up ArtNo March <=March 1210 20,500 50,900 1220 21,200 64,000 1230 15,400 40,300 ... ... ...
So, in the rows I have the articles and in the column the selected month via parameter. In another column I need to sum up all monthly values up to the selected month, meaning in this example the sum of jan, feb and mar per article.
I just upgraded SQL6.5 standard(Installed 7.0 and ran Wizard to upgrade dbs) to SQL7.0 by running the exe file.
It turned out that the MSSQL7 folder is follen on Drive C instead of Drive D which is what I wanted. When I was running the upgrade exe file, there was no prompt to ask me the right path.
How could I have the MSSQL7 folder installed on D drive?
We just upgraded SQL 6.5 to 7.0 --database was imported (thinking all table structure/ data all were imported.) Software application lost its login connection.
How can I re-establish the connection ? Thanks for your help !!
We recently upgraded from sql 2000 to sql server 2005. Our system was developed using Microsoft visual Basic. Since we upgraded to sql server 2005 our system has been very slow. I suspect that it was because of the new sql 2005 installation that i made. Does anyone know how to solve this problem for me to be able to increase the perfomance speeed of our system again. It has been stressing me for a while now.
Microsoft SQL Server Management Studio 9.00.1399.00 Microsoft Analysis Services Client Tools 2005.090.1399.00 Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158) Microsoft MSXML 2.6 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 6.0.2900.2180 Microsoft .NET Framework 2.0.50727.832 Operating System 5.1.2600
My coworkers have a higher version 9.00.34xx or something.
I am trying to generate scripts w/ the "drop before create" function...
I am beginning to write stored procedures for an application which is to be written in VB5. The stored procedures will be written in 6.5 but when the system goes live, we hope to upgrade to SQL server 7 What I want to know is what changes will I have to make to the stored procedures when I upgrade to 7.0?
While a database upgrade schema changes were being made the Mirror became disconnected will this recover itself when it reconnects or will it be the case that we will have to copy the db files to the Mirror and set it up from scratch.
Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick
New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
I just did a 2005 "In-Place" upgrade to a 2000 server yesterday, and now we're getting intermittant time-out errors trying to connect via SQL Server Management Studio. Sometimes we connect instantly, then if I try again 10 minutes later, it might time-out. No problems with our other 4 SQL 2005 servers (2 were just upgraded, 2 are native 2005). No timeouts so far when logged on to the server directly, just when logging in from our desks.
It's set to TCPIP only (removed named pipes), but can't think what else might be the problem. Any ideas ?
One little thing I just noticed while comparing to another server: In the console, a "good" server has the little green arrow on the server & SQL Agent icons, while the "problem" server is connected, but there is no green arrow. If I log on the server directly and open SQL, I get the green arrows. Is that trying to tell me something about the connection ??
Database 'C:INETPUBDEMO.TRUTHSTONE.COMAPP_DATAASPNETDB.MDF' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Hi, Strange one. I have copied my working web-site to the production server and get this message. Tried copying new set of database files and reset the server to ensure no applications could be accessing the database files. Still get the same error. Works fine on my Visual Studio VWD Express version.
Mitch PS I am not trying to upgrade the database, just use it!
I am trying to save a newly created diagram in SQL Server 2005 SP1.
The error message is: ----Beginning of pasted error message---
===================================
Cannot insert the value NULL into column 'diagram_id', table 'adt_db.dbo.sysdiagrams'; column does not allow nulls. INSERT fails. The statement has been terminated. The 'sp_creatediagram' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be returned instead. (.Net SqlClient Data Provider)
------------------------------ Program Location:
at Microsoft.VisualStudio.DataTools.Interop.IDTDocTool.Save(Object dsRef, String path, Boolean okToOverwrite) at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.DatabaseDesignerNode.Save(VSSAVEFLAGS dwSave, String strSilentSaveAsName, IVsUIShell pIVsUIShell, IntPtr punkDocDataIntPtr, String& strMkDocumentNew, Int32& pfCanceled)
----End of pasted error message---
The database I use has been upgraded from SQL Server 2000.
I am running in SQL Server 2000 Compatibility Mode (80) but changing the compatibility mode to SQL Server 2050 (90) does not make any difference with regards to this error.
ID varchar (contains alphanumeric values,not unique) Territory (combined with ID unique) Total_Used int can be null Date_ date (date of the import of the data) ID Territory Total_Used Date_ ACASC CAL071287 2014-06-01 ACASC CAL071287 2014-08-01 ACASC CAL071288 2014-09-01
[Code] .....
Now the problem,per month I need the most recent value so I'm expecting
I have two tables Costtable (Id,ResourceId, Amount,Date) and ResourceTable (ResourceId,Name) which shows output as below.
I want to show 0 amount for rest of the name in case of September. For e.g. if rest of the Resources does not appear in cost table they should appear 0 in amount
My Desired output
My current query
SELECT RG.Id AS Id, RG.Name AS Name, ISNULL(SUM(AC.Amount), 0) AS Amount, RIGHT(CONVERT(varchar(10), AC.[Date], 105), 7) AS [YearMonth]
I upgraded my XP and when attempting to restart my web site using MSSQL 2005 my login credentials were not recognised. Now, the Databse does not want to start and I can not login to check error logs. I have enclosed the error message that I am experiencing.
Can anybody please help.
Regards
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Hello,I am hoping you can help me with the following problem; I need to process the following steps every couple of hours in order to keep our Sql 2000 database a small as possible (the transaction log is 5x bigger than the db).1.back-up the entire database2.truncate the log3.shrink the log4.back-up once again.As you may have determined, I am relatively new to managing a sql server database and while I have found multiple articles online about the topics I need to accomplish, I cannot find any actual examples that explain where I input the coded used to accomplish the above-mentioned steps. I do understand the theory behind the steps I just do not know how to accomplish them!If you know of a well-documented tutorial, please point me in the right direction.Regards.
In trying to upgrade my sql express install from express to developer edition, I ended up having to delete all things express from my computer and do a clean install of developer edition (as i installed developer edition initially over sql express but this didnt seem to work; express edition still appeared in add remove programs etc). Anyway so i blew away the install and have a clean install of developer edition. Now when I create a new website in Visual Studio 2005 and try to add a database to the project, it gives me an error stating that i need to have sql server express 2005 installed to function properly... Do i need to have express AND developer edition of sql installed to do this? I would think developer edition of sql would enable me this functionality...http://img277.imageshack.us/img277/4228/sqlerrorie2.jpgThanks!It is also worth noting that I get the dreaded remote connection error when trying to connect to a db that I used to be able to connect to when I was using sql express (the aspnetdb database that is created when you user their membership stuff)"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "However, I did the following successfully:1. create a database using the sql management studio2. added a table and some data to it3. threw a dataset into the website4. added a gridview to a page in the website, pulling data from the dataset5. and the website runs successfully populating the page with data...fyi: My sql services: http://img158.imageshack.us/img158/2020/sqlserviceshj6.jpg
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.PermissionSet.Demand() at System.Data.Common.DbConnectionOptions.DemandPermission() at System.Data.SqlClient.SqlConnection.PermissionDemand() at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was: Demand The type of the first permission that failed was: System.Data.SqlClient.SqlClientPermission The Zone of the assembly that failed was: Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
Does anyone know how I can get last day of month if I pass a function a given month and and given year. @Month = 2 @Year = 2004 The result I would need is 29 because there are 29 in the month of February in the 2004. Any help on this is greatly appreciated. Kellie
Does anybody know of a way to rollback SQL Server 2005 databases back to SQL Server 2000? Is there a way of doing it without resorting to Copy Database Wizard? I love to find a way of attaching a SS 2005 database to a SS 2000 instance without any issues.
I recently upgraded to SS 2005 and I am very unhappy with the SS 2005 and I want to rollback to SS 2000, which was a lot more stable. I am having several major issues that are affecting my whole company's day-to-day operations and the managers are not happy. Some of the issues include night time batch running very sluggish for no apparent reason. This is a biggest problem because it only occurs once or so a week and causes a disturbance with the daily activities when the night time processing isn€™t completed on time. The rest of the time, the batch processing runs great, even a little better then on SS 2000. I don't believe it is a matter of my application needing to be retuned because if that was the case, then why isn't it running sluggish every night? Also, it's never the same day that the sluggish behavior occurs. If it was occurring on the same night, then I would have something to investigate within our application, but it doesn't. Another issue that I am having involves a night time job that restores a copy of the production database to the Data Warehouse server to be used for updating the data warehouse. Again, most of the time it runs great (~2 1/2 hours), but once or twice a week, it goes stupid and takes 6 1/2 hours for no apparent reason. Again, it is not happening the same day either, which could give me something to invesigate. On SS 2000, this same job ran flawlessly. Never I did I run into situation that the database restoration took that long to run. Even another issue involves a SQL Server Agent Job that was put into suspended state. What's a suspended state and how can I get it out of suspended state? I can find no information about suspended state in BOL. I did a Google and nothing came up. If this suspended state was put in for security reasons, great, but then tell me how I can remove the suspended state. I am also not happy with the fact that I can't get accurate information about the queries that are actively running at that particular moment. In SS 2000, when I noticed high CPU usage on the server, I would run the sp_who2 active stored proc and it would show me all the active thread and how much CPU it was consuming. I would then find the running threads with the highest CPU numbers and investigate the query and see if we could improve it. Now in SS 2005, I get in the same situation and run the sp_who2 stored proc, and there is no smoking gun. All of the active threads are showing very little CPU usage, which I am very suspect of. What the heck happen to sp_who2? I looked at some of the other ways of looking at running processes (i.e... sys.sysprocesses) and they don't appear to be giving the information that I need.
I am very unhappy and I just want to roll back to SS 2000 and wait a couple of years before I upgrade to SS 2005.
Hi, I understand from previous threads that installing SQL Server 2005 Service Pack 2 on the desktop client can speed up the response rate of the Visual Studio 2005 Business Intelligence Tools.
However after logging on as an administrator and installing Service Pack 2, Service Pack 2 returned no errors. However after launching Visual Studio and clicking on the about dialog box the version reported was still €œRTM.050727-4200€? where I was expecting to see €œSP.050727-7600€?.
I understood that I applied the same service pack to my copy of SQL Server on my laptop and the upgrade worked successfully.
We just upgraded to SQL Server 2005 from SQL Server 2000. The DB was backed up using Enterprise Manager and restored with SQL Server Management Studio Express CTP. Everything went as expected (no errors, warnings, or any other indicator of problems).
The DB resides in a DB Server (Server1) and the application we are running is a Client/Server system where the AppServer resides on Server2.
During the application's operation all read, create, and delete transactions work fine but no update works. When viewing details in Trace Log I see this message after attempting any update:
Could not find server 'Server1' in sysservers. Execute sp_addlinkedserver to add the server to sysservers. (7202)
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select Jan 1- 23rd feb 1-23rd march 1-23rd april 1-23rd ,value from table
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
