Upgrading MY Preformance
Jul 20, 2005
Hello all! I'm a newly appointed database administrator and have been
struggling with my consious about what would make me an excellent
database administrator. I've worked in Access for years and know that
if your comfortable with:
1. writing expressions
2. writing some VBA
3. the basics with Tables, Forms, Queries and Reports.
and you'd be sitting pretty. SQL Server is a little more robust than
Access and i'm not sure where I should start.
I'm comfortable with writing T-SQL statments, backing up, and creating
users. but other than that, i'm a little lost on what else i should
know.
thanks.
View 1 Replies
ADVERTISEMENT
Mar 6, 2001
Does anyone have any formulas or standards that you use in determining the hardware needs of either a new server or for keeping your current server in top running condition.
Also, I know some of the basics for performance on the databases, but any ideas on things I should look for (or documentation links) on utilizing the best performance of the server itself?
thanks in advance for any comments
View 2 Replies
View Related
Dec 22, 1999
I have found a huge prefomance degridation running something thru a Job on the server and running it through ISQL.
I have a sp the runs in about 24 min thru ISQL, but when I fire it off thru a job at night using the Agent, it take roughly 4.5 hours... Way slow...
Any thoughts?
View 1 Replies
View Related
Jul 6, 2006
Hello,I am learning SQL Server and I would like to ask you a question. Couldyou tell me please if sequence of columns in a table has influence onperformance?Thank you very much/RAM/
View 3 Replies
View Related
Nov 6, 2007
Hi All,
Need to know the preformance statistics of SSIS!
Please reply Ur comments,
Regards,
Sandesh
View 3 Replies
View Related
Jan 1, 2007
we have run access 2003 application using SQL 2005 server
and the data transfer rate is extreamly slow.
we are using ODBC connection
and the access apllication works very fast with SQL 2000.
we have the tested the comptabilty of the application to SQL 2005 with Microsoft wizard and it had no problems.
even when i run simple application on the sql 2005 server, it runs very slowly.
i am using the MDAC clients ODBC component and the SQL Native Clients one.
which eliminates the possibilty of network problem.
what could be the problem???
View 1 Replies
View Related
Feb 5, 2002
Hi,
I have to upgrade the sql server from 6.5 to 7.0 for the first time. I have decided to go with two machine upgrade using named pipes.
The question is: Can we still use 6.5 machine and database as production version until we test out the application on 7.0?
We are planning to relpeat the upgrade once the testing is done on 7.0 server once the testing is done.
View 1 Replies
View Related
May 14, 1999
We're going to be upgrading our Server from 6.5 to 7.0. In addition we're getting a new SQL Server Box.
Which of the following is better: a) Install SQL 6.5 on the new box, restore the DB from old box to the new box, then install 7.0 on the new box and use the upgrade wizard to upsize the DB. (We'll have room to leave the 6.5 devices on the box after upgrading.) or b) Install SQL 7.0 on the new box and upsize the db across the network (100megabit network cards).
Thanks,
Kevin M. Tupper
EZLinks Golf, Inc.
http://www.ezlinksgolf.com
View 3 Replies
View Related
Jan 19, 1999
I'm following a white paper and have run chkupg65 and am stuck at resolving keyword conflicts. I see many TechNet references about fixing them...but none about how. A little help? Below are the conflicts:
Keyword conflicts
Column name: SyncModification.ACTION[SQL-92 keyword]
Column name: Jobs.EXPIREDATE[SQL-92 keyword]
Column name: SqlStoreTable.SIZE[SQL-92 keyword]
Column name: JobDetails.TIME[SQL-92 keyword]
Column name: SchedulerSafeDelete.TIME[SQL-92 keyword]
Column name: SMSEvent.TIME[SQL-92 keyword]
Column name: SyncModification.TIME[SQL-92 keyword]
Column name: vJobDetails.TIME[SQL-92 keyword]
Column name: vSMSEvent.TIME[SQL-92 keyword]
Column name: Sites.TIMESTAMP[SQL-92 keyword]
Column name: QueryExpressions.VALUE[SQL-92 keyword]
View 1 Replies
View Related
Jun 15, 2001
Does anyone know of a good book or resource on what's the best way to upgrade 6.5 to 2k? Or generally how would you do that considering you need to do on more then 50 servers?
View 1 Replies
View Related
May 15, 2008
So I'm using Visual Studio's one click deployment to install/update software for users. SQL Express 2005 is the default, and I need to get all current and new users to update to SQL Express 2005 SP2. Ontop of that, I need to change the sa password for all current users (I should be able to manually set it for the new guys).
The problem I'm having is that instead of just updating the current SQL Express engine installed, it creates a new instance of the SQL Express engine when installing SQL Express SP2.
Is there anyway to just update SQL Express to SP2? Is there an easy way to change the sa password when doing so?
View 1 Replies
View Related
Jul 23, 2005
I have an application which installs MySQL 3.23. It's hard-coded. Irealize there are newer versions, so I am thinking, what's easiest:1) install the application with its default 3.23 and then run a scriptto convert 3.23 to 4.1 or later,or2) modify the application to install a newer version of MySQL from thestart.
View 2 Replies
View Related
Nov 29, 2007
I'm in the process of upgrading a gazillion apps from using .MDB files to using SQLCE 3.5. (Or, at least planning the upgrade). Is there an easy way to save existing .MDB files as .SDFs? Also, we have an occasional app that's web based (eg. certification exam, where we have 10 people take it online at the same time, in one day, and the database keeps the score, questions, etc.); is it a good idea to move that kind of app to SQLCE from MDB?
View 3 Replies
View Related
May 29, 2008
Hey,
I have a SQL Server 2005 Express Edition installed, and I want to upgrade to SP2.
Is there a way to configure (using the setup ini file maybe?) the installer to install only the SP2?
Thanks ahead
--sternr
View 7 Replies
View Related
Dec 22, 2005
When I run SP3 & SP4 for SQL Server it runs okay. I get no errors after the installation & both installations call for a reboot which I do with no problems.
But yet when I get back into my machine, go to the Query Analyzer & run "Select @@version" and execute it, it's still showing v8.00.194 (Original release). It should be showing 8.00.2039.
Any ideas or suggestions?
Thanks!
View 1 Replies
View Related
Apr 29, 2002
We are upgrading our servers from 6.5 to 7.0 SQL servers. I used the same configurations on both 6.5 server and 7.0 server like ANSI and the others. But SQL7.0 server turns out to have different data on some tables. Here is the example on one table. Why?
6.5 database
WT_PAY_PERIOD_DATE WT_RDC_HOURS WT_RDC_EXPENSE WT_MS_SUB_HOURS
------------------ ------------ -------------- ---------------
Apr 20 2002 12:00AM 0.00 0.00 0.00
WT_MS_APPR_IND WT_NEW_EMPL_FLAG WT_ASSOC_OTH_EXPENSE WT_ASSOC_TOT_EXP
-------------- ---------------- -------------------- ----------------
N 3.76 135.21
WT_MS_TOT_EXP WT_MS_MILE_LIM
------------- --------------
135.21 0
7.0 database
WT_PAY_PERIOD_DATE WT_RDC_HOURS WT_RDC_EXPENSE WT_MS_SUB_HOURS
----------------------- ------------ -------------- ---------------
2002-04-20 00:00:00.000 23.50 135.2050 23.50
WT_MS_APPR_IND WT_NEW_EMPL_FLAG WT_ASSOC_OTH_EXPENSE WT_ASSOC_TOT_EXP
-------------- ---------------- -------------------- ----------------
Y X 3.7600 135.2050
WT_MS_TOT_EXP WT_MS_MILE_LIM
------------- --------------
135.2050 373
------------ 135.21 135.21 0
7.0 databases
WT_PAY_PERIOD_DATE WT_RDC_HOURS WT_RDC_EXPENSE WT_MS_SUB_HOURS WT_MS_APPR_IND WT_NEW_EMPL_FLAG
------------------------------------- -------------------------- --------------------------------- -------------------------------- ----------------------------- --------------------------------
2002-04-20 00:00:00.000 23.50 135.2050 23.50 Y X
WT_ASSOC_OTH_EXPENSE WT_ASSOC_TOT_EXP WT_MS_TOT_EXP WT_MS_MILE_LIM
------------------------------------------- ----------------------------------- -------------------------- ---------------------------
3.7600 135.2050 135.2050 373
************************************************** ************************************************** ************************************************** **********************
I have checked the datatypes that are transferred from SQL6.5. They are the same types as SQL6.5. Plus the configurations are the same on both 6.5 and 7.0. The question is that why the values are different? What the way is to fix it?
View 1 Replies
View Related
Apr 30, 2002
Hi,
Well there's always a first for everything!! I have a SQL 7.0 server on sP1
and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
Thanks Much,
Steve Bajada
Senior DBA
View 3 Replies
View Related
Jul 18, 2001
Has anyone attempted an upgrade from sql7 to 2000? is it a difficult process? what happens to the users. Is there a good site i can go to to get this info ?
Thanks in advance
View 1 Replies
View Related
Aug 5, 2001
Does anyone know how to upgrade a sql driver. Or where to get the driver dll from. The client machine is running 3.70.06.23 and needs 3.70.08.20 to connect to the sql server!
View 1 Replies
View Related
Aug 11, 1999
One of my students' company is doing an upgrade from SQL 6.5 to SQL 7.0
and everything converts fine except one veiw. Does anyone know what
would cause this to happen? If they run the script in SQL 7.0 it works
fine. Any thoughts?
CREATE VIEW dbo.vewRptWooActiveList
AS
SELECT vewRptWooActiveListSub1.wotUserValue1,
vewRptWooActiveListSub1.wooNum,
vewRptWooActiveListSub1.wooCreatedWhen,
vewRptWooActiveListSub1.wooDispatchedWhen,
vewRptWooActiveListSub2.MaxOfwslInsertedWhen AS wooLastStatusWhen,
vewRptWooActiveListSub1.wosUserValue1,
vewRptWooActiveListSub1.sitName,
vewRptWooActiveListSub1.empFullName_Cp,
vewRptWooActiveListSub1.Company,
vewRptWooActiveListSub1.Region,
vewRptWooActiveListSub1.ServiceCenter,
vewRptWooActiveListSub1.Zone
FROM vewRptWooActiveListSub1 INNER JOIN
vewRptWooActiveListSub2 ON
vewRptWooActiveListSub1.wooID = vewRptWooActiveListSub2.wsl_WooIDFk
Thanks
Dawn Gill
View 2 Replies
View Related
Jul 21, 1999
I have a couple of 6.5 installations with different codepages/sort orders, when I come to upgrade these databases, is it possible to change the code pages/sort order during the upgrade of my existing databases so that I have the same sort order/codepages across all my sites?
The databases don't actually have any extended characters in.
Thanks
Dan
View 1 Replies
View Related
Jul 29, 1998
All the documentation I have read talks about upgrading from SQL Server 6.x. I presume I can use the upgrade wizard to upgrade my 6.0 system directly to 7.0 without having to upgrade to 6.5 first.
Any thoughts, comments or help would be much appreciated.
View 4 Replies
View Related
Dec 7, 1998
Hi all :
Does the upgrade wizard in 7.0 help me upgrade ALL the database objects in SQL 6.5 (including stored procedures, triggers) to 7.0? Has anyone encountered any problems?
Rnathan
View 1 Replies
View Related
Feb 13, 2002
Anyone know of any issues I should be aware of when upgrading from sql 7.0 to 2000? Is it a problematic proccess?
liz
View 2 Replies
View Related
Jun 29, 2001
Have you ever faced a problem like this. I am running MS SQL Server 6.5 on Windows NT 4.0 computer whose name is with dashes (hou-is). Now, I try to update to version 7.0 and it gives me error message: @@nameserver from export 6.5 is not valid. Use sp_addserver and sp_netname.
How you can change a sql server name to non-dash name in order to complete the upgrade sql server?
I know this is a challenging tech question.
I appreciate your tech expertise.
Vinh Nguyen from Houston, TX.
View 2 Replies
View Related
Apr 19, 2002
We are currently still running SQL6.0 on NT4 server, and we want to upgrade to SQL2000. My question: how easy is it to upgrade from SQL6.0 to SQL2000?
View 3 Replies
View Related
Nov 2, 2001
Currently running SQL Server 7, and have databases. I want to upgrade to SQL Server 2000. How can achieve it without delete or losing my databases. This is NOT a production server, BUT I still want to keep my databases. Ideally I would like to uninstall and reinstall so that there are no SQL Server 7 files lying around when I have SQL 2000 running. Thanks.
View 1 Replies
View Related
Dec 3, 2004
Hi,
We are trying to upgrade from SQL Server v7.0 to SQL Server 2000. Here's our set up,
Current Server: Win NT, SQL Server v7.0
New Server : Win 2000, SQL Server 2000
Client (my PC): Win XP, SQL Server 2000
The New Server is designated SQL Server machine -- company-wide. That is, all the apps/projects uses this machine as the SQL Server. It only has one instance of SQL Server running.
Different project are assigned a dedicated 'Drive' (logical only) and allocated certain disk size as the work space. We (my team) will be the new entry for this server.
Q: When doing the Copy Wizard (from my PC) to upgrade/copy the existing v7.0 db (from Current Server) to New SQL Server 2000, do I need to specify the physicall 'Data' folder? Or, can I copy the database to the selected path -- which is my dedicated drive?
Thanks in Advance.
_msd_
View 1 Replies
View Related
Jan 6, 2005
Hey,
Does anyone know how I would go about upgrading a database version to 'C.0.6.43'? I am getting an error and it is telling me to upgrade my database to this version.
Thanks
View 2 Replies
View Related
Feb 11, 2004
Hi All,
We're about to upgrade/re-build our SQL server box.
We have 2 apps which use the server (both fairly small), one uses NT security - the other uses SQL security.
My question is, apart from our 2 databases, what else should we backup (and restore onto the new clean machine) so as to preserve the user logins for the app that uses SQL security (the other one's dead simple)? The app itself maintains the user details and creates the SQL logins (with passwords etc.) but I can't find a way to 're-create' them.
Any help would be greatly appreciated.
Thanks,
John
View 1 Replies
View Related
Mar 11, 2004
I have read a few books on SQL Server and on access. I recently got my 1st programming job (vb.net)
I want to move my database from Access to SQL server. But I would like to Use access as the front end for simple data entry, queries and reports. I dont know how to do this,, (using Access as a front end for SQL Server)
Can anyone recomend topics of interest or a good book?
Thanks
~M
View 6 Replies
View Related
Mar 5, 2007
Hi all, I'm hoping someone can help me out. I'm totally new to SQL server.
I wanted to upgrade this one server that was running SQL 8.0. I did an install of SQL2005 (9.0 right?) and it appeared to go well. But once it was completed I found out that the original installation of SQL was on a different drive. So instead of upgrading, I actually installed another instance of SQL? (Is that term correct?) So now when I open SQL2005, it shows the server name but with (SQL Server 8.0.2039) next to it.
How can I now upgrade the databases themselves?
Please help!
thanks!
-tim
View 1 Replies
View Related
Sep 11, 2007
Hi
Im new to this forum so go easy!
Ive been asked to do a few things:
1. copy an existing 2005 express db to another machine
2. on the new machine install 2005 express and get the db working
3. upgrade 2005 express to 2005 standard (have disks etc)
So far i've physically copied the .mdf and the .ldf to the new local machine and I think ive installed sql 2005 express ok, but what do I do when I start it up, eg asks for a server name etc. Is that my local machine name, ive tried browsing and cant seem to do so locally to pick up the copied db. Once ive got this sorted, is the upgrade to standard a straight forward microsoft install, or do i have to do anything to the db (unmount is it called?)
Any help/suggestions would be greatly appreciated! Many thanks
View 5 Replies
View Related