I don't know How can i upload my sqlserver file to the server could you help me? could you write an example code in query analyser for uploading sql server file to database
I'm a newbie. I have googled many web sites,but i can't find the help that how to upload or store files(include images) into a database with Asp.Net 2.0. Although i have found few samples about storing images into database,but the sample applied with Asp.Net 1.0 or 1.1 technology... In microsoft MSDN,i found the help about FileUpload control,but the sample is about how to upload files to servers's folder with saveas() method. Who can help me ?Give me a refer sample about upload files to database with Asp.Net 2.0. Is it need to use stream or what other method? By the way, i want make a document managment system with vwd and sql express. Thank u very much if u can give me a help.
plz help me to upload my sqlserver data base with query analyzer method plz write the code i should write in query analyzer box to uplode my database(db) in my server(h_server) and is it neccessary to uplode log file or not ,or guide me with intruducing a site
I am rewritting our DTS that upload tables in FoxPro to SQL Server using SSIS. I am finding the that SSIS is way slower. My uploads using DTS take just 7 minutes where doing the same thing in SSIS is taking 1 hour 15 minutes.
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System; using System.Collections.Generic; using System.Text; using System.Net; using System.IO;
namespace Predict.Services { public static class Foo { public static string GetIntradayQuote(string symbol) { string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close(); response.Close();
return returnQuote; } } }
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
I am in the process of planning a server upgrade to sql2005 x64.
I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.
I have the following error when I query the linked servers. OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error". OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.". Msg 7311, Level 16, State 2, Line 1 Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.
I am aware of KB 906954. http://support.microsoft.com/default.aspx?scid=kb;en-us;906954
I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.
However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.
Hi, I am new to SQL Server 2005. I tried connecting to my local machine by using my machine name as Server name and then tried running the following query: SELECT * FROM SYS.Objects. It gives me following error: Invalid object name 'sys.objects'.
Whereas, if I connect to my local machine using mahcinenameSQLEXPRESS, then the above mentioned query runs fine.
Why is this difference? What is the difference when I login in these 2 different ways. Any help would be appreciated.
I used upload image feature and below is the code that I used. The image is stored in a folder. I want to save the image in sql database. I create the database which is “database�, and I create a table which is “user�. User table has auto “id� field and “image� field. I want to save the image in the image field. I need your help to do the other codes.
I am using asp.net with VB
This is what I did so far: ============================ Partial Class upload Inherits System.Web.UI.Page Dim strFileName As String
Protected Sub btnupload_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnupload.Click UploadImage() End Sub Sub UploadImage()
If Not (fileupload1.PostedFile Is Nothing) Then 'Check to make sure we actually have a file to upload
Dim strLongFilePath As String = fileupload1.PostedFile.FileName Dim intFileNameLength As Integer = InStr(1, StrReverse(strLongFilePath), "") strFileName = Mid(strLongFilePath, (Len(strLongFilePath) - intFileNameLength) + 2)
Select Case fileupload1.PostedFile.ContentType Case "image/pjpeg", "image/jpeg" 'Make sure we are getting a valid JPG image FileUpload1.PostedFile.SaveAs(Server.MapPath(" estimages") & strFileName) lbstatus.Text = strFileName & " was uploaded successfully to: " & Server.MapPath(" estimages") & strFileName
Case Else 'Not a valid jpeg image lbstatus.Text = "Not a valid jpeg image" End Select
I am using the article, " Storing Binary Files Directly in the Database Using ASP.NET 2.0 By Scott Mitchell "
http://aspnet.4guysfromrolla.com/articles/120606-1.aspx I have tried to modify the code and my datatable to replicate the function, but I am getting an error, "MIMEType" is not a SQL Parameter
An SqlParameter with ParameterName 'Type' is not contained by this SqlParameterCollection. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IndexOutOfRangeException: An SqlParameter with ParameterName 'Type' is not contained by this SqlParameterCollection.Source Error:
Line 53: Line 54: 'Specify the values for the MIMEType and ImageData parameters Line 55: e.Command.Parameters("Type").Value = MIMEType Line 56: Line 57: 'Load FileUpload's InputStream into Byte arraySource File: E:homeDefaultetances.ushtdocshomeadminaddNews.aspx Line: 55 Code: Protected Sub AddNewsBut_Click(ByVal sender As Object, ByVal e As System.EventArgs) If Page.IsValid Then InsertDs.Insert() Response.Redirect("~/news/default.aspx") End If
End Sub
Protected Sub InsertDs_Inserting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) 'Reference the FileUpload control
'Make sure a file has been successfully uploaded If UploadedFile.PostedFile Is Nothing OrElse String.IsNullOrEmpty(UploadedFile.PostedFile.FileName) OrElse UploadedFile.PostedFile.InputStream Is Nothing Then Label1.Text = "If there is no photo of this event, please use a stock photo if you have none available. Else, please upload a photo of the event." e.Cancel = True Exit Sub End If
'Make sure we are dealing with a JPG or GIF file Dim extension As String = Path.GetExtension(UploadedFile.PostedFile.FileName).ToLower() Dim MIMEType As String = Nothing
Select Case extension Case ".gif" MIMEType = "image/gif" Case ".jpg", ".jpeg", ".jpe" MIMEType = "image/jpeg" Case ".png" MIMEType = "image/png"
Case Else 'Invalid file type uploaded Label1.Text = "Please use the correct file type: .jpg, .jpe, .gif, or .png." e.Cancel = True Exit Sub End Select
'Specify the values for the MIMEType and ImageData parameters e.Command.Parameters("Type").Value = MIMEType
'Load FileUpload's InputStream into Byte array Dim imageBytes(UploadedFile.PostedFile.InputStream.Length) As Byte UploadedFile.PostedFile.InputStream.Read(imageBytes, 0, imageBytes.Length) e.Command.Parameters("Photo").Value = imageBytes
I created a website a year ago. I remember I need to download something from Microsoft (some kind of sql admin thing), which allows me to convert my database in the Express Visual Web developer to sql file, then I can copy those sql commands into my web hosting company's sql admin window to upload the database online. I forgot what things I should download from Microsoft? Please help.
I am building this project and for all the data i put in to the DB Title,Author, etc.... ineed to also add a picture of the book. I terms on space what is the best way to do this? In the DB? Or ref a folder? If so does anyone have sample code for each. ThanksMike
Hi, I am trying to upload a file to database. I have used the following code, every loads good to the database apart from the image, does it go anywhere? I have created a column in the table called 'FileUploadAdvert' and made it an image? Any ideas where I'm going wrong? ThanksGordon Protected Sub btnAdvertSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnAdvertSubmit.ClickDim dashDataSource As New SqlDataSource()dashDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("DashConnectionString1").ToString() dashDataSource.InsertCommandType = SqlDataSourceCommandType.Text dashDataSource.InsertCommand = "INSERT INTO tblAdvert (AdvertOwner, AdvertName, TopLeftH, TopLeftV, Height, Width, ToolTip, WebLink, AcceptTerms, DateTimeStamp, IPAddress) VALUES (@AdvertOwner, @AdvertName, @TopLeftH, @TopLeftV, @Height, @Width, @ToolTip, @WebLink, @AcceptTerms, @DateTimeStamp, @IPAddress)"dashDataSource.InsertParameters.Add("AdvertOwner", txtName.Text) dashDataSource.InsertParameters.Add("AdvertName", txtCompName.Text)dashDataSource.InsertParameters.Add("TopLeftH", DropDownAccross.Text) dashDataSource.InsertParameters.Add("TopLeftV", DropDownDown.Text)dashDataSource.InsertParameters.Add("Height", DropDownHeight.Text) dashDataSource.InsertParameters.Add("Width", DropDownWidth.Text)dashDataSource.InsertParameters.Add("ToolTip", txtOver.Text) dashDataSource.InsertParameters.Add("Weblink", txtURL.Text)dashDataSource.InsertParameters.Add("AcceptTerms", CheckBoxAgree.Checked) dashDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString)dashDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now) If Not FileUploadAdvert.PostedFile Is Nothing ThenDim filepath As String = FileUploadAdvert.PostedFile.FileName Dim pat As String = "\(?:.+)\(.+).(.+)"Dim r As Regex = New Regex(pat) 'runDim m As Match = r.Match(filepath) Dim file_ext As String = m.Groups(2).Captures(0).ToString()Dim filename As String = m.Groups(1).Captures(0).ToString() Dim file As String = filename & "." & file_ext 'save the file to the server FileUploadAdvert.PostedFile.SaveAs(Server.MapPath(".") & file) lblStatus.Text = "File Saved to: " & Server.MapPath(".") & fileEnd If Dim rowsAffected As Integer = 0 Try rowsAffected = dashDataSource.Insert()Catch ex As Exception Server.Transfer("Register_Fail.aspx") Finally dashDataSource = Nothing End Try If rowsAffected <> 1 ThenServer.Transfer("Register_Fail.aspx") ElseServer.Transfer("Register_Complete.aspx") End If End Sub
We have to upload the database from the production server to the ineternet server. We are making a backup and restoring the databse on the internet sever, this requiers somebody on the serrver to restore the database manually. Is there any other way? Can i overwrite or update the new design the database on the server in any other way? Thanks.
i am loading xml files present in a folder to sql server. i am doing this by means of ActiveX script (VB). i am passing every xml file and its schema definition file as parameter. later this script automatically create a table in script and loads the the data to database. for every xml in that foleder there is only one xsd.--------this was my intention. but when i run the DTS script error is coming like "Error source: schema mapping, unable to upload xsd file".
is that always necessary to add (xlmns:sql "urn:schemas-microsoft-com:mapping-schema") in its schema definition file.
Hello!! i need to upload a csv file to sql server, i am trying to load using bcp or bulk load, but the files has null columns, so i guess, that's why the program is displaying error.
If I need to upload a single value from some singular query to the localvariable it may be like this:set @var = (select F from T where...)Next, what to do if I need more than one?Is it necessary to create a cursor, then open it, fetch and so on? Or may besomething likeset @var1, @var2 = (select F1, F2 from T where...)Thank you.
How to upload a content of a table into sql-file (the set of INSERTs)using standard MSSQL utilities?*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
How to upload a content of a table into sql-file (as a set of INSERTs)using standard utilities?*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
