I want to upload 100 pdf files to database with a single button click. i dont want to use file input control at design mode.I want to create a instance of fle input control at run time and with a loping concerpt 100 more files should be uploaded to database.
Is there any way to upload without using file input control at design mode and upload all files with a single button click.......
I am importing all the files from a particular folder to a table on my database KB. It is working perfectly if i use it on the same system where the DB exists and not working from the network.
USE TESTDB
--Table Creation Starts here
Create table Account([ID] int IDENTITY PRIMARY KEY, Name Varchar(100), AccountNo varchar(100), Balance money)
Create table logtable (id int identity(1,1), Query varchar(1000), Importeddate datetime default getdate())
--Table Creation ends here
---Stored Procedure Starts here
Create procedure usp_ImportMultipleFiles @filepath varchar(500), @pattern varchar(100), @TableName varchar(128) as set quoted_identifier off declare @query varchar(1000) declare @max1 int declare @count1 int Declare @filename varchar(100) set @count1 =0 create table #x (name varchar(200)) set @query ='master.dbo.xp_cmdshell "dir '+@filepath+@pattern +' /b"' insert #x exec (@query) delete from #x where name is NULL select identity(int,1,1) as ID, name into #y from #x drop table #x set @max1 = (select max(ID) from #y) --print @max1 --print @count1 While @count1 <= @max1 begin set @count1=@count1+1 set @filename = (select name from #y where [id] = @count1) set @query ='BULK INSERT '+ @Tablename + ' FROM "'+ @Filepath+@Filename+'" WITH ( FIELDTERMINATOR = ",",ROWTERMINATOR = "")' --print @query exec (@query) insert into logtable (query) select @query end
I was following an example from the book "ASP.net unleashed" in Chapter 14, where it describes how to upload a file directly into the database. I got it to insert the file into my database as described, and with changes created a master and detail form to select the file and display it.. (which I assume had worked). Except, when attempting to access the file it gives two different errors. For a ppt file it gives:
The XML page cannot be displayed Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'http://localhost:3870/SeminarOrganiser/view_file...
and for a simple txt file:
The XML page cannot be displayed Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://localhost:3870/SeminarOrganiser/view_file.aspx?...SELECT suggestEvent.suggestID, suggestEvent.uID, users.uFirstName, users.uLastName, users.uEmail, suggestEvent.suggestTitle,...From these two errors, I cannot really make sense of what has gone wrong or even why XML has even been mentioned. Looking around on the net has not allowed me any further progress.In any case, would anyone be able to explain to me what might have gone wrong?Alternatively, any links that may help would be greatly appreciated.Thank you very much in advance.
I have a directory of files that I would like to upload with some datato a table so that I can store the files in the db. I'm not trying toparse files into rows, I want to stick the actual file in the column.Is there some kind of insert script, or bulk copy that I can use?I have about 150 docs and I would rather not go through the whole app,pick the file, upload it. etc.thx,M@
I have a webpage where I want to upload pdf files to my database (arround 2 MB). Putting them inside the database is the choice based on audit definitions the client has.The problem is that for big file uploads, I get the "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding." error.I believe the solution is expanding the connection timeout time in the SQL connection. But I don't want to do that in web.config, as a small timeout is good for every page except this one.What I was thinking about was something like, on button command:- "create new connection string"- use that connection string to upload the file using the datatables and tableadapters- turn back to the default connection string. How do I explicitly tell the system to "use THIS connection string on the next task" ?Alternatively, another way of doing is also appreciated!
Hi everyone! i am working on an web application database(asp.net,c# and sql server), wherein i wanna upload and retrieve different kinda files . so guys, plz do, give me some info abt how exactly i can carry out the task and if possible give me the snippet too(hmm,, very lazy....) thanx in advance regards kiran
Can anyone show me how to upload a pdf file to SQL 2005 and perform a Full Text Search on it and to extract record based on a word in the pdf. I have looked all over the web and I couldn't get any thing working as mentioned in other forums. Please mail me a small example if possible on salman.anwar@wmich.edu ASAP.
Hello, I have 3000 images to upload in SQL. I have a page that does it in ASP.net 2.0 1 by 1 but i am looking for a faster way. The targeted table look like this *ID (int) ImgSize (int) ImgContentType (nvarchar 50) ImgFile (image) Thanks for the help.
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I have a couple of hundred flat files to import into database tables using SSIS.
The files can be divided into groups by the format they use. I understand that I could import each group of files that have a common format at the same time using a Foreach Loop Container.
However, the example for the Foreach Loop Container has multiple files all being imported into the same database table. In my case, each file needs to be imported into a different database table.
Is it possible to import each set of files with the same format into different tables in a simple loop? I can't see a way to make a Data Flow Destination item accept its table name dynamically, which seems to prevent me doing this.
I suppose I could make a different Data Flow Destination item for each file, in the Data Flow. Would that be a reasonable solution, or is there a simpler solution, or should I just resign myself to making a separate Data Flow for every single file?
I am trying to restore multiple .bak backup SQL database files onto a new server. However, I have found that it will not allow me to restore multiple databases at once. Is there a way to do this so that I do not have to manually upload one at a time? I tried adding all the .bak files at once to the backup device window but it only did the first one listed. It would be so much easier to restore them all at once so that I do not have to continue this manual process. I am restoring them via device.
I need to be able to bulk insert a bunch of tables from their corresponding flat file. I have created an XML file (see below) which has the file name/table name pair at each node. I then created a ForEachLoop task and used the Node enumeration type and the following OuterXpathString: ReferenceFiles/File. At this point I get lost. How do I pass the 2 inside node values (file name and table name) to variables which I can then use as expressions for the bulk insert task inside the Foreach?
I used the data export wizard to export a single table to a single flat file (multiple wasn't allowed). I saved the package as a *.dtsx file which I'm attempting to edit to add the additional tables.
Creating additional sources is fairly easy copy of the first source and change to the table name.
I've tried copying the destination connection and changing to a new text file, but can't get past having to add each column manually to the new destination.
How can I duplicate the mapping that must be taking place in the wizard in the *.dtsx editing environment?
This seems like a simple / common task, but I've been unable to find a solution.
Hi! I want to save and retreive some files on sqlserver. I want to save the files in binary format on sqlserver and I want to get back them in their format.Is it possible in c#? If possible please help me to do this. I already succeeded to save a file in binary format, but i am getting problem to retreive that in its format. Thanks in adance
I have a server containing two mirrored HD's connected to a SAN.
I have to install SQL Server 2005 onto this server, I intend to put all data/log files on the disks that are in the SAN but my question is: where is the best place to install SQLServer itself, the local disk (ie. C:) or disks within the SAN?
I have searched but not found quite the best way to look at this so far..
I have an application that outputs data to several text files (up to 30). These have commonality by an object name, but then contain completely different column data.
In DTS I had each of the source text file connections going to one OLE DB connection and then individual transform data tasks pointing to the one OLE DB connection.
Looking at SSIS, it would appear that I would need to have one source and one destination for each of these and therefore 30 parallel data flows?
Just wondering if there is a neater way of doing this??
It is a regular data import that happens a few times a day - the text files are named the same as the SQL tables - ie app_userdata.txt goes to app_userdata table.
Hello,I'm looking for a tutorial or some sample code to save a file in sql server with c#. So far I have not been able to find a anything I could use as most tutorials are in VB. I'm using the varbinary max type to store the file. The part I need help with is selecting the file and converting it using the Stream object, not the SQL insert statements. Thanks,Arnold
How can i Store files like (abc.txt , abc.doc) in SqlServer Database from ASP.NET application ?? my files are about (2 Mb ) size aslo want to know about text as well as .jpg , . gif files also pls send me code ... help me
I built an application that connect to MS SqlServer2005 using Native driver (sqlncli.msi) I install that file from MS site, I need to deply my application to the end-user, and I would like to know what files do I need to deploy to make sure the application is gona run okay on the client PC's.
I search in the registry for the driver, and I found this "sqlncli.dll", is it enough or I need to include more files !!
I am trying to write (my first, unfortunatly) DTS, and am having some problems.
I need to be able to import multiple flatfiles (all in the same format, just with different schema), each one going into a different table. I have written an application to call my DTS, sending it variables for the tablename and the filename. This works fine when I test it on a single flatfile.
My problem is, the Tranformation object does not reset after each DTS call, so I get "Column does not exist" errors after the first successful import. I can go into the DTS Manager and reset the Transformation options, but that would defeat the purpose of automation. Is there anyway to reset, or another technique, the Transformation object so that it will continuosly work on files that use different schema?
I am very new at DTS, so please consider me "ignorant" when replying.
Can I have multiple SQL Server Agents running concurrently?
I would like to have 10 instances of database running on my local SQL Server - each of these are Merge Replication to a unique database located offsite.
Do they all run through one SQL Server Agent?
If they do would this be a slow process as, I think, the SQL Server Agent queues the replications pending.
I have a sql server project where I have added 1 stored procedure (named StoredProcedure1) and 1 class (named MyClass). MyClass has two functions Func1() and Func2(). The stored procedure simply instantiates MyClass and calls Func1().
Func1() creates a SqlConnection object using "context connection=true" - opens the connection and then calls Func2(). Func2() also creates a SqlConnection object using "context connection=true" - and attempts to open the connection. However when attempting to the Open() call inside Func2(), the code just exits. What gives? The code is pasted below, thanks!
*******THE STORED PROCEDURE************** using System; using System.Data; using System.Data.SqlClient; using System.Data.SqlTypes; using Microsoft.SqlServer.Server; using SqlServerProject1;
public partial class StoredProcedures { [Microsoft.SqlServer.Server.SqlProcedure] public static void StoredProcedure1() { // Put your code here MyClass obj = new MyClass(); obj.Func1(); obj = null; } };
*******THE CLASS "MYCLASS"************** using System; using System.Collections.Generic; using System.Text; using System.Data; using System.Data.SqlClient; using System.Data.SqlTypes; using Microsoft.SqlServer.Server;
public class MyClass { public MyClass() {
}
public void Func1() { using ( SqlConnection conn = new SqlConnection("context connection=true") ) { conn.Open();
Func2(); conn.Close(); } }
public void Func2() { using ( SqlConnection conn = new SqlConnection("context connection=true") ) { if ( conn.State != ConnectionState.Open ) conn.Open();
if ( conn.State == ConnectionState.Open ) conn.Close(); } } }
I am new to SQL Server 2005 SSIS Packages. I want to transfer data from multiple tables from sql server to oracle database. I cannot use export wizard as it creates new tables in the destination (oracle) DB. I already have tables created in the destination DB. When I created an SSIS package, it allowed me create package to tranfer data for only for one table from source to destination. I have created DTS packages in 2000, where you have source db and destination db and just add links for multiple tables. Is there a way I can do it in SSIS. Please let me know.
I have multiple .sql files, exe each one manually is a pain, so how do you run multiple .sql files all at once? Beside creating a batch file, are there t-sql commands that could execute .sql files?
I have a rather large sale transaction DB. Basic header, and detail tables. I am providing a third party company with daily sales information, and I need to give them back data from about 8 or 9 months ago. I currently have a DTS package that gets sales for the current day, but since I have to go back, I have to manually edit the query in the DTS package, and change the date range...UNLESS ...
Blah, blah, blah. The problem is that they can only take the data in Daily files. So, there would be ONE file for each day. I really don't need to be manually running these jobs, so I'm wondering if someone could point me to a way of writing a package (maybe ActiveX, not sure) that would run through a loop, basically, of dates, and create a seperate file for each day. Versus having to edit a generic DTS package, and changing the date range 350 times...
Using an expression to set the log filename to include the date and time results in 3 log files being created.
Ummm. Why? I only ran the package once. Is SSIS not sharing my log file connection among the different components?
On first thought my workaround would involve using a script task to "set" the log file name to a variable and use an expression to set the log connection to the variable. But the problem with that is that logging starts BEFORE the script task is run...
I have a job with a single step that executes a stored procedure that performs the following steps:
1. Checks for the existance of a file A in a folder A
2. If it exists,
a. executes the cmdshell to run a DTS package to drop a table, recreate it and load the data in the file A to table X
b. runs other stored procedures that use the data in table X to create other tables Y and Z
c. executes the cndshell to remove and rename the file A from Folder A into Folder B
What I'd like to do is use this same stored procedure if possible, but create a job or another store procedure that would loop thru and process multiple files in Folder A instead of just one.
Hi, I have about 300-400 XML files I want to load in my SQL database (2005). The following code will load one (1) file. How do i do a mulitple collections? INSERT INTO MEL (DATA) SELECT * FROM OPENROWSET (BULK'C:TempCHAPTER1.xml', SINGLE_BLOB) AS TEMP Thanks,
