Upper Limit For SQL Server?
Sep 23, 2005
I was wondering what more experienced DBAs have observed with regard to the capacity of a MSSQL DB. Is there an upper threshold of rows where performance becomes unacceptable? I have a fairly slow, but constant input rate of approximately 2,000 rows every 60 seconds or so (that is a little high, but I'm interested in worse case scenario here). That is up 172,800 rows a day. (I'm being overly pessimistic here.) We'd like to be able to keep all of this around as long as possible.
Or would a more heavy duty DB be in order for these sorts of data rates?
View 7 Replies
ADVERTISEMENT
Apr 19, 2001
One of our database is approaching the gigabyte size. I know that microsoft claims to support terabyte databases with sql server 7.0. I was wondering if anyone could tell me about the max size of database they have used on an OLTP site without running into problems. ofcourse with SQL Server.
thanks,
rachna.
View 1 Replies
View Related
Sep 9, 2015
Our development team wanted to create a database user for each application user in the application and use these for granular data access control, which at first, sounded like a good idea but our initial testing ran into some interesting results.
Our target user base was about 15 million users with an estimated 1% concurrency rate, and finding no MS documentation on an upper limit to the number of users a database can have we began some load testing to see how the database performed. In the hundreds of thousands of users range our test database had a hard time performing well under light loads (even without any concurrent connections).
When we purged the users and reverted back to just a handful of service accounts, performance went back to "normal" under the same loads. I began to wonder if this is a situation where throwing more hardware at the problem would overcome the issue or if there is a practical upper limit to the number of users a single database can handle well.
(There were of course other cons to this arrangement and I certainly was never going to expand the users tree in the object explorer for a database like this, but we thought it a solution worth investigating.)
What is the largest number of users any of you have had in a single database?
View 3 Replies
View Related
Jul 20, 2007
There may/may not be an upper limit for the number of rows in a table, but is there any performance-related limit?
I'm designing a database that stores results that have been acquired from a number of devices. Each device provides a set of data measurements every 10 minutes. Therefore each year a device will produce 52000 sets of results.
If I design a table to store a row for each set of measurements from a device (PK is based on the timestamp and the deviceID), and if there are 100 devices recording for 5 years, there will be 52000x100x5 rows. Would I get a performance increase by separating this data into one table per year? Perhaps the year could be appended to the table name to identify the particular tables.
A secondary issue is some devices can also be configured to produce a different set of measurements every 10 seconds. In this case there will be hundreds of millions of rows over a 5 year period. Therefore I am considering bulking the results into an array for a 10 minute period, and storing this array as a blob each 10 minutes. Is this going to be faster or slower than having hundreds of millions of rows?
Thanks in advance for any advice,
Mark.
View 2 Replies
View Related
Jul 23, 2005
Hi, all:I'd heard that the upper row limit in SQL of 6080 bytes may have beenincreased with SP3.Can anyone confirm/deny this? Is this still a 'carved-in-stone' uppercap?Thanks,DW.
View 1 Replies
View Related
Nov 3, 2004
Hi,
Can we set the Uper/Lower case in server wide in SQL server 2000 as like case sensitive.
Thanks,
Ravi
View 6 Replies
View Related
Jul 13, 2006
Our sql server 2005 database is receiving data from a third part program over which we have no control. We need to be able to automatically convert data entered in one column of one table to UPPER case only.
How can this be done in the table itself?
View 3 Replies
View Related
Apr 25, 2008
An IBM Global Services consultant is telling my client that in order to have SAP BI read any data from any other application supported by SQL Server 2005, that all tables and fields MUST be in UPPER CASE. This would mean that SAP BI could not read ANY data from AdventureWorks (which everyone needs ) but more importantly from 95% of applications written and stored on SQL Server. I find this to be ludicrious, frankly, but don't know how to find out if it is true. Anyone?
View 4 Replies
View Related
Mar 30, 2004
Hi
I want to return distinct values from a table in uppercase
Have tried
SELECT UPPER DISTINCT fieldname FROM tablename
But returns an error, what is the correct syntax.
Thanks
View 8 Replies
View Related
Mar 27, 2001
Is there a way I can have all entries in a table automatically in caps once entered by user, import or any other way ?
Thanks a lot in advance.
-PFD
View 2 Replies
View Related
Aug 13, 2001
Is there a method for converting the first character of a account name to uppercase and the the remaining characters to lower case? I've used the substring procedure but for a name like 'MY NEW COMPANY', how could I convert it to 'My New Company' ?
Thanks,
Terry
View 1 Replies
View Related
Mar 27, 2001
Folks,
what script must I use, as a part of CREATE TABLE, to automatically convert characters to UPPER case on insert?
I wrote <CHECK (country = UPPER (country)> in the CREATE TABLE, which was wrong,
because the values were still in the lower case.
The sample script is:
CREATE TABLE address
(street varchar(40),
city varchar(20),
state char (2),
zip varchar (10),
country varchar (20))
When a user types "Canada", I want the inserted value be "CANADA"
Any help is greatly appreciated.
View 1 Replies
View Related
Jan 29, 2008
Hi expert, I would like to ask regarding the UPPER function in SQL Query. I was tryin' to create a scipt that will give me a result of all the names that are in UPPER case format, but when I tried to execute the script the result is not right, it also retrieves all the records that are in PROPER case.
SQL Script:
SELECT id, name FROM table_1 WHERE UPPER(name) LIKE 'DAR%'
Result:
ID NAME
-- -------
1 Darren
2 DARREN
View 2 Replies
View Related
Mar 12, 2008
Table :Employee
name Age
'ARUN KUMAR' 30
name column should be displayed
as Arun Kumar
'A' and 'K' need to be upper can i know what function to use??
View 1 Replies
View Related
Mar 26, 2008
I am new to SQL and, unfortunately, actually do my work in Access 2003, but I have a question.
This is an example of what the data I am working with looks like:
AALADIN
AA-TACH EH65X, EH65V (V-Twin)
AA-TACH w/Robin 20 & 20.5 h.p. OHV
AA-TACH w/Wisc.-Robin EY21
ABI CONTRACTOR w/Honda 20 h.p. (V-Twin)
The all caps text strings at the beginning of the field need to end up in a separate field than the mixed strings, and the mixed strings need to stay together. The field length varies, as do the lengths of the all caps text strings. There are a lot of records, so I would be interested to know if there was a way to proceed without manually editing each line.
The
View 7 Replies
View Related
Aug 3, 2004
someone suggested I use:
select top 20 * from t
where pkc not in (select top 10 pkc from t order by pkc) order by pkc
to simulate the limit function in mysql.
i want to replace the 10 in the inner select with a variable. When I do this:
select top 20 * from t
where pkc not in (select top @counter pkc from t order by pkc) order by pkc
it gives me in an error in sproc. Pls help!!
View 1 Replies
View Related
Jul 20, 2005
I'm storing time series data in a table in SQL server 2000. The tablehas columns like: CodeEquity, PriceDate, LastPrice. To extract thelast price for a number of equities on COMMON DATES I have used thequery:select t.LastPrice,h1.LastPrice,h2.LastPrice,h3.LastPrice fromBlg_HistoricData t,Blg_HistoricData h1,Blg_HistoricDatah2,Blg_HistoricData h3where t.CodeEquity=114151 and h1.CodeEquity=112220 andt.PriceDate=h1.PriceDate and h2.CodeEquity=112580 andt.PriceDate=h2.PriceDate and h3.CodeEquity=112228 andt.PriceDate=h3.PriceDatethis works for about 20 self joined tables and then says syntax error.I'm wondering what sql limits it hits. Is it possible to do this inSQL for 300 tables?Thank you.
View 1 Replies
View Related
May 13, 2004
Hi;
I have a stored procedure :
<code>
Create Procedure ControlDept
(
@DeptID nvarchar(10)
)
As
If Exists
(
Select DeptName From Departments Where
DeptID LIKE @DeptID
)
Return 1
Else
Return 0
Now I want to apply replace and upper functions to DeptID in database before saying
"DeptID LIKE @DeptID".
for example the parameter is :"D&V"
DeptID in database is:"d & v" //there are spaces
if I say DeptID LIKE @DeptID nothing is found because of character nonmatching
So I have to apply replace & upper functions to the column DeptID in database
but how?
can you help me please??
View 1 Replies
View Related
Jan 14, 2005
We want to covert all reserved words
in procedures to upper case,any suggestions ?
View 3 Replies
View Related
May 2, 2008
My SQL Server database is not case sensetive.
How can I compare like cluase with search for capital and small letter?
For example
SELECT add1 from xcty_all where add1 like '%AL'%'
I need only
...................
10 ltncewwod way AL
456 Ruio St. AL
NOT
Duci Ral Rd Mexico
Albi Road Hawai CA
I want to ingore this bold letter on search
Sanjeev Shrestha
12/17/1971
View 1 Replies
View Related
Apr 23, 2002
Ho can I convert first letters of a string to Upper Case (i.e. UNITED KINGDOM - Untited Kingdom). I have country names table which has all entries in uper case. This makes a select box very larg and unproportional.
Thanks in advance for the help.
Php95saj
View 14 Replies
View Related
Jul 23, 2005
Hello, we've an Oracle transition in the pipeline and want to convertall our database objects to upper case. Any one got a script ortechnique (other than manual) to do it?Many thanks, Kevin.
View 2 Replies
View Related
Oct 17, 2007
Hi,
I have a problem. I need to rename all columns of a database to uppercase. Since SQL SERVER 2005 does not support changing system tables is there a smooth way to do this? Has anyone ideas for a script? point me to the right direction.
I have found the stored procedure sp_rename which could be useful (or would it be better to alter the tables)...
So any help would be appriciated very much...
Regards
fb
View 4 Replies
View Related
May 21, 2007
Almost all of our character fields are stored in upper-case. Is there an easy way to force SQL Server char and varchar fields to upper-case? Something I can do in SQL Server instead of in the client? It needs to apply to any new records.
There are some exceptions (email addresses for one). I don't mind going through each field and changing something.
Thanks!
View 4 Replies
View Related
Jul 20, 2004
I have used this mysql code in my programm before:
select * from address order by vorname asc limit 0, 10
It works fine. But now I want to use sql server, and it doesn't recognize the term limit.
So I have found out that I can use top instead.
I have changed my code into this:
select top 0 * from (select top 10* from address order by vorname) order by vorname asc
But it gives me an error message:
wrong syntax near the word Order.
Can anyone give me a solution?
Thank you.
View 5 Replies
View Related
Jun 13, 2006
Hi, I need some help about a project I'm working on.
I'm working on a project (based on MS SQL Server) that will involve a lot of clients, each one constantly querying the server.
Just to have an idea of the project, I'm talking of about 2000 clients, each one queries the database 3-4 times per second: a total of 6-8000 queries per second.
The database is reached through Internet and every client uses a dedicated DSL connection.
My questions are:
- What is the maximum workload of a Microsoft SQL Server?
- What happens when the server workload reaches 100%? is there a queue? and what happens when the queue is full? is it possible that the server goes out of service due the excess of work?
- What are (more or less) the hardware requirements for such a server?
can anyone help me, at least telling me how to find these answers (web sites, books, ...)
thank you for you support
View 11 Replies
View Related
Oct 27, 2005
How can I check (from TSQL) if a table is likely to bust the 8k limit?ThanksMike
View 1 Replies
View Related
Jun 22, 2006
Hi There,
I have a column which contain alphanumeric values:
aab123add234cdf423dej553edg543
If I try to return records between these values 'a' and 'e' it will only go as far as d. (first letter)
aab123add234cdf423dej553
This is true if I use where value between a and e
Or if I use greater than equal to operators
Any help would be great.
Thanks
Stuart
View 2 Replies
View Related
Sep 20, 2006
hi i want to select * from table1 where name =petter?now if there is many type of petter in table linke PETTER , Petter And petter which record will come in display?if i want all this three (PETTER,Petter,petter) will come in display which command is for this ??? regard
View 4 Replies
View Related
Apr 12, 2007
I have several tables in a deployed database in which the primary key is of type int, and autoincrements by 1 each time a record is added. My question is, since ints are 32-bit, what happens when its value reaches 4,294,967,296? I know that seems like an extrememly large amount of records, but when we imported the data into the database it started at key value 1,000,000. I don't know how to make it use lower numbers which are currently not being used (numbers below 1,000,000), and I am worried I will have problems when I reach the upper bound. What kind of problems could this cause? Should I change the primary key's type?Thanks!
View 2 Replies
View Related
Dec 21, 2006
Currently i have 2 type of data
A and a
But when i try to:
select * from tableA where col = 'a'
then all record with A and a will be selected, any way to avoid it and select only record with col ='a'?
View 1 Replies
View Related
Aug 11, 2015
While creating a table, can we default a column to be UPPER. So that even if we insert a lower case, it should be converted to UPPER case.
View 4 Replies
View Related
Jul 7, 2015
In the database, most of our cities are stored in all upper case. For reporting purposes, I need to have them returned as upper/lower. I used the below function, which works great for one word cities. However I can’t figure out how to get it to capitalize the 1st letter of each word, for addresses containing multiple names such as Rancho Santa Margarita.
Upper(left(CR_MEMBER_ALLMEMBERDETAILS.ADDRESSCITY,1))+lower(substring(CR_MEMBER_ALLMEMBERDETAILS.ADDRESSCITY, 2, LEN(CR_MEMBER_ALLMEMBERDETAILS.ADDRESSCITY)))As ADDRESSCITY
This returns back: ‘Rancho santa margarita’; I need it to return ‘Rancho Santa Margarita’. Is this possible to do at the query level?
View 10 Replies
View Related