I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
We have received a backup of a database from an external company for a project that we are taking over. We have attempted to restore the database and it fails giving us the error: "Internal consistency error occurred."
We have run the restore verifyonly command with the results: "The backup set is valid." However, I don't have confidence that the verify is telling the complete story.
It appears that the database is restored and the overall restore is failing on the transaction log file.
Hi, I've to restore a bk into a new DB, because the old one has a lot of devices created on different places and phisical disks. Im not sure to do that, cause Ive heard some problems with this action.
The old Db has 10 devices of data and 10 devices of log, and I want to create only one device of data (sum of all the data devices) and only one device of log (sum of all log devices) Is it possible or not?
I have this error message when I try to connect to a server SQL Server :
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC SQL Server Driver] Client unable to establish connection /include/ctt.asp, line 6
Hi, I am trying to do DTS for transfering data from one server to other server,both are on T1 link,after some time DTS failed by giving error message saying that " Error at destination for Row number 3357844,Errors encountered so far in this test:1,,,Invalid charector value for cast Specification " that table have 24 million rows..
How can i solve this problem,Please help me in this.this is urgent please
I have this error message on the server event log. I don't know what it actually means and how it can be resolved.
Error: 644, Severity: 21, State: 1 Could not find the index entry for RID '36f072000300101a0434d54525830303237323038' in index page (1:28942), index ID 2, database 'gemprod'.
A service which transfers HL7 data in and out of SQL server gave me the following error message
01/25/02 07:59:41:HL7 TCP Import:Error: Error: -842150451: Unexcepted error: Attempt to fetch logical page (1:112948) in database 'Development' belongs to object 'TRIGGERSbkup', not to object 'PATIENT'. Attempt to fetch logical page (1:112948) in database 'Development' belongs to object 'TRIGGERSbkup', not to object 'PATIENT'
I ran dbcc against the database and recieved no errors. Any help appreciated
Hi i am trying to transfer the contents of a dbf file to sql server 2005 and this is my error message 'C:Documents and SettingsKarenMy DocumentsVisual Studio 2005WebSitesASC1pdfclientAS.DBF' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. This is my code If (FlAS.PostedFile.FileName.ToLower.EndsWith(".dbf")) Then FlAS.PostedFile.SaveAs(location) Try 'Connection string to a dbase file Dim dbfConnectionString As String = String.Format("Provider=Microsoft.Jet.OLEDB.4.0;Data Source ={0};Extended Properties= dBase IV", location)
'create connection to the DBF file Using connection As Data.OleDb.OleDbConnection = New Data.OleDb.OleDbConnection(dbfConnectionString) Dim command As Data.OleDb.OleDbCommand = New Data.OleDb.OleDbCommand("Select * from AS.DBF", connection) connection.Open()
'Create a dbDatareader to the dbf file Using dr As Data.Common.DbDataReader = command.ExecuteReader() Dim sqlConnectionString As String = System.Configuration.ConfigurationManager.AppSettings(APPSETTINGS_CONNECTION) Dim myConnection As New SqlConnection(System.Configuration.ConfigurationManager.AppSettings(APPSETTINGS_CONNECTION)) Dim query As String = "Truncate table ASDBF" myConnection.Open() Dim cmd As New SqlCommand(query, myConnection) cmd.CommandType = CommandType.Text cmd.ExecuteScalar() myConnection.Close()
'bulk copy of sql server Using BulkCopy As SqlBulkCopy = New SqlBulkCopy(sqlConnectionString) BulkCopy.DestinationTableName = "ASDBF" BulkCopy.WriteToServer(dr) End Using End Using connection.Close() End Using
Hi I am writing a program in Visual basic 5.0 which would read the data from btrieve database and would transfer the btrieve data to Sql server database.My code part is working properly but as soon as (sql Server) it inserts the 325th record i get the following error
"Can't allocate space for object syslog in database tempdb because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment."
This error comes only when i edit my database in SQL Server and in my code i get ODBC Call failed(this error is just because it could not insert any further records to the database.)
Please suggest me with the syntax or code to be used in Sql server or a query to be passed
What i did i truncated the transaction log but every now and then i have to manually truncate transactions. But did'nt work
Hi there, I access to server SQL by an application on web,I configured the ODBC box for using TCP/IP and the server use also the TCP/IP. I have this message :
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL server not found. /medecin/IdentificationAcces/membre_enregistrer.asp, line 108
I get the same when I try a restore database The instance is on a xp Pro local desktop which is only new. No database has been restored yet on this instance. But everything seems to work fine on this instance e.g Northwind, xp_cmdshell etc. Any help?? Thanks
I am reading a guide telling how to create a private server and it says I need to restore the database. So I go to File->Open->File->My Computer->Local Disk->Program Files->Microsoft SQL Server->MSSQL.1->MSSQL->Data->GunzDB. Then the following message comes up: "The file cannot be opened because it is being used by another process. Please close all applications that might access this file and try again."
The question is, how do I get past this? I need the answer as soon as possible, I am a newb with this program so I don't entirely know what I am doing. I have tried searching for the answer, but I cannot find anything.
Hi, I'm trying to do insert some data to the database through typing the a number in a textbox. But i will get this error message whenever i tried putting a number that will be inserted to the database. Sorry that the codes are quite messy. Please do let me know which part of the coding contains the errors. Please help me. Thanks. Server Error in '/WSD Project - Cam-Mart' Application.
String or binary data would be truncated.The statement has been terminated. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: String or binary data would be truncated.The statement has been terminated.Source Error:
Line 26: Line 27: Protected Sub add_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles add.Click Line 28: SqlDataSource2.Insert() Line 29: Response.Redirect("Checkout.aspx") Line 30: Source File: C:Documents and SettingsAdministratorDesktopWSD Project - Cam-MartOrder.aspx.vb Line: 28 Stack Trace:
Protected Sub add_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles add.Click SqlDataSource2.Insert() Response.Redirect("Checkout.aspx") End Sub Protected Sub Back_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Back.Click Response.Redirect("Catalogs.aspx") End Sub Protected Sub checkout_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles checkout.Click Response.Redirect("Checkout.aspx") End Sub End Class
I have a 95GB database (dump file is 73 GB) and I want to restore it on a different server. I have created 95GB devices and tried to restore it, but it failed because of reason " page xxx had non-log objectid xxx while checking in syslogs" . I tried locating the object on that page but it showed page is in cache.
Hi all i create a setup project with visual studio 2005. In this project i install cassini, sqlexpress, ajax and my site. After this i have to restore a database i use for my application.
if i try to restore it in two machines (XP-Vista) where i have already installed sql server it works fine but when i try to restore it in a virgin machine i have a "Restore failed for Server 'MyServer' " error
So i suppose it's a problem of permission for user or is locked something in sqlexpress while it isn't in sql server I try to change "Built-in account" in Configuration Manager from Network service to Local System but nothig someone can help me? thanks Marco
I accidentally restore an old database backup to my current database!! The worst is I don't have any new backup for my current database....:eek:
So ... does anybody here know how to solve this problem?? Can I undo the transaction log?? if it is possible.. could you please teach me the way to undo it?? I'm desperate.....
I'd greatly appreciate if you can answer me....
Thanks in advance... __________________ Best Regards, Debbie
We have an order posting stored procedure that's been executing for 14 hours now. This procedure has simple update statements but all the tables updated have triggers which update other tables with triggers and so on. This procedure hasn't commited yet. I have a full database backup from last night and transaction log backup from this morning while it was running. I want to kill this job and restore database from last backup. Only thing I am afraid of is that it will take too long to roll back which I have no estimate of time. Is there any faster way to get rid of all the uncommited transactions? Has anybody rolled back such a massive transaction? Any idea on how long it can take? Can it affect the overall server performance as this is the main production ERP server. I can see in profiler that this procedure is still running and not hung.
I'm having a serious problem in SQL 2000 SP3 Database which is used Business Applications. Today, I tryied to take backup in service time by the Enterprize Manager, the following error occured and could not take backup. -------------------------------------------------------------------------------------------------------------------------------------- Error 926 : Database '[database name]' cannot opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information. -------------------------------------------------------------------------------------------------------------------------------------- After that, we tried same operation 3 times. But result is same.
After sometime, end-user report us that they can not log-in to database.
So we tried to dettach this database and attached it. We success to dettach, but we can not attached it.
Also we tried to restore this database from Yesterday's backup file by using Enterprize Manager, but the following error occured, and could not complete. This backup file was generated daily backup task in Maintenance Plan in Enterprize Manager. -------------------------------------------------------------------------------------------------------------------------------------- Microsoft SQl-DMO(ODBC SQLState:42000) The media family on device "E:ccd......xxx.bak" is incorrectly formed. SQL Server cannot process this media family. RESTORE DATABASE is terminating abnormally. --------------------------------------------------------------------------------------------------------------------------------------
We need to recover the database immediately not to stop the end-user business process. Please help us.
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
execInfo = rsReportExec.LoadReport(strReportPath, strHistoryID). The errro was "System.Web.Services.Protocols.SoapException: The path of the item "http://localhost/ReportServer/Pages/ReportViewer.aspx?/CAITReports/rptIssuesByRole&rs:Command=Render&intProjectID=119&nvchrWhoRan=DYW" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item "http://localhost/ReportServer/Pages/ReportViewer.aspx?/CAITReports/rptIssuesByRole&rs:Command=Render&intProjectID=119&nvchrWhoRan=DYW" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply.
I copied and pasted the path on the URL and it worked. What did I miss in the code? Why strHistoryID is required as it is nothing? Please refer to http://msdn2.microsoft.com/en-us/library/microsoft.wssux.reportingserviceswebservice.rsexecutionservice2005.reportexecutionservice.render.aspx
Private Sub sExecuteReportingServicesReport()
Dim rsReportExec As ReportExecutionService = New ReportExecutionService
I'm trying to use the message queue task in SSIS 2005 and not getting very far. Right off the bat I'm trying to create a Message Queue Connection Manager and when I enter the path, trying both "seawxxxx estq" (my local computer name) or ". estq" and test it, it comes back with "invalid path". Have done quite a bit of searching around and can't find anything on this particular error.
I am having difficulty restoring a database (DB_1) consists of 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf, Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf, One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
The development environment & the SQL Box are two different boxes.
I am trying to create a simple application where I want to synchronize data between Pocket PC application's ( Emulator) local database(SQL Mobile) to SQL 2005 Database. I have tried the steps outlined in the following link
Once I have completed all the steps as per the steps in the above link, I have copied the .sdf file to an another machine where I have the development environment. I have created a device application in VS 2005 and created a datasource poiting to the file (.sdf) copied locally.
Then I have added the following code string filename = @"e:VelsunMobileTest.sdf";
if (VelsunMobileTestDataSetUtil.DesignerUtil.IsRunTime()) { // TODO: Delete this line of code to remove the default AutoFill for 'velsunMobileTestDataSet.Customers'. this.customersTableAdapter.Fill(this.velsunMobileTestDataSet.Customers); }
}
private void DeleteDB() { if (System.IO.File.Exists(filename)) { System.IO.File.Delete(filename); } }
private void Sync() { SqlCeReplication repl = new SqlCeReplication();
Can anyone help, I have a master database on my server which has an extremely large log file size. I need to shrink this down and so I have tried using dbcc shrinkfile (master, 50, truncateonly) and dbcc shrinkdatabase although it does not seem to reduce in size
Hi,After just installing sql 2005 on our test machine, I am trying torestore a database using a backup file on the network. However, thespecify backup diagol box allows only for browsing to a file on thelocal machine - I find no way to type a UNC path to choose the backupfile from. I can do this in 2000, is it no longer an option to doitthrough the GUI or am I missing something?ThanksKR
I'm trying to RESTORE LOG with a different recovery path. Is there a way to do this? I'm getting the below error. I know I could RESTORE from the beginning, but need to RESTORE the log file to the same database schema but different database and server. What steps do I need to do?
This backup set cannot be applied because it is on a recovery path that is inconsistent with the database. The recovery path is the sequence of data and log backups that have brought the database to a particular recovery point. Find a compatible backup to restore, or restore the rest of the database to match a recovery point within this backup set, which will restore the database to a different point in time. For more information about recovery paths, see SQL Server Books Online.
I have a problem that looks like it has not been discussed before inthese groups.I have a simple SQLAgent job that runs sp_who (could be anything, butlet's just say sp_who for this example). I have set the jobstep towrite to an output file "T:out.txt". If the job is owned by anadmin, it runs fine and writes the output file. If it is owned by anon-admin user, it gets the following error msg:Warning: cannot write logfile t:out.txt. Error 1059 : Circularservice dependency was specified. The step failed.I know about setting up the SQLAgent CMDExec proxy account, and havedone that. In fact, both SQLAgent and the SQLAgent cmdexec proxy usethe same domain account, which is in the administrator group of thelocal server. So, I know that security is not the issue.When a simple job runs and writes to an output file, what service orservice group could it be trying to start or modify? I looked throughthe list of Services, and could not find any circular dependencies.Is there a utility to detect this? Why would running under onecontext (as an admin) be ok while the other context (non-admin on SQL,but using the same admin domain service account) fails?Thanks in advance for any info you might have.
Can anyone tell me why my SQL2000 database has grown aprox 15 % and my Log file 20,000 % when I attach it to SQL2005 .I've Thousands of Databases to Upgrade, but with the log file increasing to more than the size of the Database Its going to be a struggle !
It also takes a fair ammount of time to attach,
I suspect there is some reindexing going on , as when I try to reattach to SQL 2000 I get index errors ?
Is the re anything I can do in advance to reduce the database growth ?
I know I can truncate the log afterward but the peak diskspace consumed during my Migration may be an issue !
I'm trying to restore my DB to a new server and also a new instance of SQL 2005 SP2+ hotfix KB934458.
I've successfully restored my MSDB database and everything seems to be working fine, but now when I'm trying to do a restore of my Database RMc to the attached SAN,
I'm getting the error:
System.Data.SqlClient.SqlError: The path 'H:' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
the H: is the Drive letter for my attached SAN.
The path I'm trying to give is H:\DBData for the MDF-file and the H:DBLog for the LDF-file.
I have the DB running on another server also with a SAN attached and there are no problems.
I also moved the MSDB to another drive on the SAN - a G-drive without any problems.
