I accidently deleted the file that I was working on in notepad that had the tables and views that I created. Is there a way to retrieve a list and the code that I put in for the tables and views?
View 1 RepliesI need ssrs report  which  get job info from job table in list control  and other  one is jobid and workdate which also need to be group by and storeproc I am using for this  report is as follow:
ALTER proc [dbo].[VRAJ_JobScheduleReport] Â Â Â Â Â Â Â Â Â Â Â
  @JobID int = null,  @StartDate varchar(25) = null,  @EndDate varchar(25) = nullASSET
NOCOUNT ONÂ SET ANSI_NULLS ONÂ SET QUOTED_IDENTIFIER ONÂ DECLARE @sql varchar(max);DECLARE @param varchar(max);DECLARE @where1 varchar(max);DECLARE
@where2 varchar(max);SET @param='';SET @where1='';SET @where2='';IF @JobID IS NOT NULLÂ Â BEGINÂ Â Â
SET @param = @param + 'DECLARE @JobID int; SET @JobID=' + CAST(@JobID AS varchar(50)) + ';';Â Â Â IF @where1 = ''Â Â Â Â
[Code] ...
I need ssrs report which get job info from job table in list control and other one is jobid and workdate which also need to be group by and storeproc I am using for this report is as follow:
ALTER proc [dbo].[VRAJ_JobScheduleReport]
@JobID int = null,
@StartDate varchar(25) = null,
@EndDate varchar(25) = null
AS
SET NOCOUNT ON
[Code] .....
Is there a way to easily list the tables/views that a view is using to get its data?
Thanks in advance,
Shawn
Hi,
this is my second attempt to get an answer to this question.
We want to strip our firstName column and lastname column of any punctuation that might be present.
What's the best of doing that?
Is my only choice to write a nested REPLACE for each character we want replaced (which will end up being very very long) or is there another way.
thanks
Zoey
Ok here is what I have
Department:A
Line 1 Name: George
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
125254 Test 10
Total: 80% 40
Name: Mik
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
Total: 70% 30
Name: Jonathan
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
Total: 70% 30
Line 10
Line 15 Total for this division: 33% ((100 )/3) 100
Department:B
€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦..
Here is what I did I have a list control that is grouped by department. this will get me the info from Line 1 to Line 10 then this list control is actually under another list control that is grouped by department to get the info from Line 15. I used this example for simplicity and what I am doing is fairly similar to this situation. My problem is, I need to find away to know how many totals I have to count the total for the entire department. In other words : from the example above how can I know I have to divide by 3 to get 33%. I can get the 100 without any problem but I can€™t tell what number I need to divided by. I tried to use Count(Name.Field) I was hoping this will give me 3 which indicates the divided number. But I was getting 7 for some reason.
How can I get the number of times the list control was implemented for one department which is in this case 3?
thanks
I have a custom list(say a list for account numbers, account numbers starting with 13 form a group, then starting with 14 form a group and like that)
and then there are tables inside this list. the report will be displayed based on the values of this custom list.
i also have a drill through report for this. now when i pass fields!accountnumber.uniquename for this list only the first of the group values say 130001 is selected..
what shud i do to select the whole grp??
thanks!
Hello I have a few questions hoping someone can help
Any way to hide a report completely ? ie data source folders, subreports called from hyperlinks etc
Anyway off hiding the List view and restrict the user from selecting list view ?
Anyway off customising the reporting services top area which is in yellow and black ie put a logo in this area ?
thanks
Dear Friends
I have 3 form with these names :
Clients <----- Projects <------- Files
I am using this query in my [ web ] page :
select clients.id ,
(select count(*) from projects where projects.clients_id = clients.id) as TotalProjects
from clients
I want to compute SUM for all relevant files for each client's projects.
how i can add it to select select statement ??
thank you.
m.o
When using Sql Server Enterprise Manager and viewing a Database / Tables section, most of the tables if not all have a create date of 11/5/2004.Except for one, DNN_Users, has a creation date of 7/10/2007What factor could have caused that create date to have changed?What factors go into the date being set on that column in the database design? Does the date get updated say if I were go go in and change a datatype in a table?
View 5 Replies View RelatedI need to install SSIS/SSRS in SSMS. I have connected the SharePoint list view to excel for reporting purpose but due to data size the performances is very slow in excel and now I would like to connect the SharePoint List to SSIS/SSRS
I have windows 8, 64 bit system
I have installed SQL Server Management studio 2012 but I am unable to enable the Integration and Reporting Services
May be I have missed to choose the option during installation.
I want to see all the fields list on the left side of report layout, you can drag a field and put it on the report.
Thank you very much.
I am creating a view consisting of 278 to 300 columns. ( I want to use this view for data entry). The columns are of varchar(30) datatype. I am able to successfully create the view but upon opening the view in Enterprise Manager or Access I get the following error:
Too many columns defined in rowset.
Is this a bug? Please advise.
Thanks
Ziggy
I need to see the sql for a view in query analyzer.
how can i do that ??
Hi ALL,
How to create index in the view on MS SQL 2000?
Thank you very much!
I have a list of ClassID that is stored based on users multi select on a listview
For example ClassID might contain
301
302
303
304
Now I need to find InstructorID where classID matches all the value in the above list.
I am using this query
Code:
Dim assSQL = "Select InstructorID from ClassInstructors where ClassID = @P0"
For i = 1 To classIDs.Count - 1
assSQL &= " UNION Select InstructorID from ClassInstructors where ClassID = @P" & i.ToString
Next
[Code] ....
But the problem is the query is returning InstructorID where ClassID matches any of the ClassIDs. I want it to return Instructor ID where ClassID matches all of the ClassIDs in the string.
How to set default values for selection list navigator without using parametrized queries for data source view.
View 2 Replies View RelatedHi all,
I have writen a Function which call's the same function it self. I'm getting the error as below.
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
Can any one give me a solution for this problem I have attached the function also.
CREATE FUNCTION dbo.GetLegsFor(@IncludeParent bit, @EmployeeID float)
RETURNS @retFindReports TABLE (EmployeeID float, Name nvarchar(255), BossID float)
AS
BEGIN
IF (@IncludeParent=1)
BEGIN
INSERT INTO @retFindReports SELECT MemberId,Name,referredby FROM Amemberinfo WHERE Memberid=@EmployeeID
END
DECLARE @Report_ID float, @Report_Name nvarchar(255), @Report_BossID float
DECLARE RetrieveReports CURSOR STATIC LOCAL FOR
SELECT MemberId,Name,referredby FROM Amemberinfo WHERE referredby=@EmployeeID
OPEN RetrieveReports
FETCH NEXT FROM RetrieveReports INTO @Report_ID, @Report_Name, @Report_BossID
WHILE (@@FETCH_STATUS = 0)
BEGIN
INSERT INTO @retFindReports SELECT * FROM dbo.GetLegsFor(0,@Report_ID)
INSERT INTO @retFindReports VALUES(@Report_ID,@Report_Name, @Report_BossID)
FETCH NEXT FROM RetrieveReports INTO @Report_ID, @Report_Name, @Report_BossID
END
CLOSE RetrieveReports
DEALLOCATE RetrieveReports
RETURN
END
Hello,
Maybe anyone have done that before?
I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables.
i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.
I made such SSIS package. set ole db source data access mode to table or view name variable.
set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables)
but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.
how to solve that problem?
I have a database that has 370 tables that match %_REF_% naming. All of these tables have a column call ds_name.
I need to get a list of all values of ds_name for each table.
Hi, I have a table in which I will insert several redundant data. Don't ask why, is Integration services, it only reads data and inserts it in a SQL table. THis way, I have a SQL table with several lines repeating them selves. What I want to do is create a procedure that reads the distinct data and inserts it in another table, but my problem is that I am not able to select data line by line on the original table to save it in local variables and insert it on the another table, I just can select the last line. I've tried a while cycle but no succeed. Here is my code: create proc insertLocalizationASdeclare @idAp int, @macAp varchar(20), @floorAp varchar(2), @building varchar(30), @department varchar(30)select @idAp = idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization)select @macAp=macAp,@floorAp=floorAp,@building=building,@department=department from OLTPLocalizationif (@idAp <> null)beginInsert into dimLocalization VALUES(@idAp,@macAp,@floorAp,@building,@department)endGO This only inserts the last line in the "oltpLocalization" table. O the other hand, like this:create proc aaaaasdeclare @idAp as int, @macAp as varchar(50), @floorAp as int, @building as varchar(50), @department as varchar(50)while exists (select distinct(idAp) from OLTPLocalization)begin select @idAp =idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization) select @macAp = macAp from OLTPLocalization where idAp = @idAp select @building = building from OLTPLocalization where idAp = @idAp select @department = department from OLTPLocalization where idAP = @idApif (@idAp <> null)begin insert into dimLocalization values(@idAp,@macAp,@floorAp,@building,@department)endendgo this retrieves every distinct idAp in each increment on the while statement. The interess of the while is really selecting each different line in the OLTPLocalization table. I did not find any foreach or for each statement, is there any way to select distinct line by line in a sql table and save each column result in variables, to then insert them in another table? I've also thought about web service, that reads the distinct data from the oltpLocalization into a dataset, and then inserts this data into the dimLocalization table. Is there anything I can do?Any guess?Really needing a hand here!Thanks a lot!
View 1 Replies View RelatedHi everyone,
I use sql 2005. What is the best practice for dealing with large table (more than million rows)? Table Partition, View or other?
Can you please give some suggestions? It will be very helpful if you can post some references or examples.
Thank you!
i need to give list all table in my database plaese give me qurity?
thanks a lot
Hello,
If you need to have a liste of tables starting with 'WI', under Oracle for example, with a simple select of a system view (with a filter : table_name like 'WI%') you have the result.
Under SQL Server, how to do this simply (sp_tables ?) ?
Thanks in advance
Hi Group!I would like to get a list of all the table names from a database, cananybody please tell me how to do that? Many thanks!
View 4 Replies View RelatedHi,
i want to get the list of column i have in a table using sql statment
can someone send me example?
thanks
Anybody know any method/script I can use to see a list of table name
and table size (in bytes, not rows) within a database?
I know I can see the size of any particular table in "Table info" tab or using "sp_spaceused" procedure. But I can't generate a report with a list of table name and table size using these methods.
Any idea? Thanks.
John
SELECT Item.Unit_price
FROM Item
ORDER BY Item.Unit_price DESC
How can I display the Top10 only? thanks.
Hi guys, i'm sort of stuck.
I have a list of names, all i have to do is check to see if any of them are in a table, if they are they get deleted. The unique field of the table is title and it is what i have. I don't really know how i am meant to do this. I thought of creating a new table, placing my values into it and comparing to the already existing table, but surely their is a simple way?
Is there a system table that holds the table definitions, names, properties, etc. for tables that I have designed? I would like to write a transact SQL query to insert a field in every table that I have defined.
View 1 Replies View RelatedPlease how can I get list of tables in a database? Thanks.
View 3 Replies View RelatedHi Everybody,
i am it sutck when i am writing this sql in sqlserver2005
my requirement is to list all the table name and along with their filed name if some one modified (table definition ) for a specifc date range ?
is there any way to get these information in sql server 2005 ?
regards
sujithf
Hi,How to get list of all relations of certein database's table?
View 7 Replies View RelatedHi! There must be a very simple answer to this question, but it’s my first venture into using SQL Server data.
I’ve set up an ASP.NET site to provide for on-line sign-up of events. The site has a masterpage and utilizes a wizard to create an e-mail to request sign-up for an event.
I’d like to make my radiobuttonlist dynamic so that events past the signup deadline will not be displayed. So, I’ve created a database table that includes two fields: event_description and event_date – such that the radiobuttonlist will only show those events that are at least three days beyond today’s date.
I’ve configured the data source and the radiobuttonlist so that I can display all the entries in the event table, but I can’t figure out how to restrict them to today + 3 events only.
I’m guessing my problem is in the “Add Where Clause� of the “Configure Data Source� wizard. I’m sure the “Column� should be set to event_date and the “Operator� should be set to “>�, but what should I set the “Source� & “Parameter Properties� to? I’ve set a variable in my program as “Dim deadline As Date = Today.AddDays(3)�, but the wizard doesn’t seem to see it.
Can anyone steer me in the right direction?
Thanks, Jerry