Urgent - No Mapping Between Account Names And Security IDs Was Done Error !
Feb 28, 2007
Hi There
When i go to configuration manager and change the sql server service to run as a domain account i get the following error:
No mapping between account names and security IDs was done.
This is Sql Server Express running on a domain controller - Windows Server 2003 R2.
Everything i find ont he net refer to IIS, DHCP etc etc , i cannot find the issue regrading sqls server configuration manager.
Thanx
View 13 Replies
ADVERTISEMENT
Oct 25, 2007
Hello all;
I am trying to form a replication system but at the very beginning i couldn't pass an obstacle.
While trying to create the Replication it says i have to change the user which starts the SQL Agent because the current starter user account is a system account and this will make the replication between servers fail.
"SQL Server Agent on OZN currently uses the system account, which causes the replication between the servers fail. In the following dialog box, specify another account for the service startup account."
I change it in the properties dialog box of the SQL Server Agent. The new account is the one I formed and granted accordingly. But it gives the following error when I try to apply the changes.
" Error 22042: xp_SetSQLSecurity() returned error -2147023564, 'No mapping between account names and security IDs was done' "
I tried many things, searched in the net, changed the owner of the database, applied new accounts, many grants, applied service pack 4, etc...
If anyone helps it will be very much appreciated. Thanks in advance...
View 3 Replies
View Related
Jun 7, 2006
I received the following when trying to deploy an 2005 analysis services package over an existing database:
The following system error occurred: No mapping between account names and security IDs was done.
We have redeployed this solution several times over the last week and have never encountered this error. The changes that we are deploying are related to partitioning of the measure group fact tables - and are not related to security in any way. Can someone assist?
View 1 Replies
View Related
Aug 26, 2015
Our software vendor rep is trying to upgrade MS SQL server 2008 SP4 to 2012 SP1. Get an error message: no mapping between account names and security ADs was done. He says that we get this error message because we have two domain controllers in our network, and one is running on the same windows server that run sql server. Out IT support disagrees to delete the second domain controller, saying it is recommended by Microsoft and he suggests that the problem is in Active directory.
View 2 Replies
View Related
Jul 4, 2007
Hi,I created a user account on my active directory service. I then triedto assign a service located on my SQL server to be executed by thisaccount. However, when I try to configure my SQL server service, Iget the following error message:WMI Provider Error"No mapping between account name and security ID was done"Do you know what I am doing wrong?thanks
View 1 Replies
View Related
Sep 19, 2007
Hi,
If you use a component that has a column mapping tab (most do) then you know that the component will try and map input and output columns automatically by name.
Is there a way to disable this feature when writing your own custom components? There is already a manual way to do this: rightmouse in the mappings tab of a component and chosen "Map Items By Matching Names". I find it is less helpful to auto-map initially because the designer tends to not think about the mappings.
A way of turning of auto-mapping in existing components would be cool too!
Cheers,
Martin
View 3 Replies
View Related
May 10, 2015
I am using Windows server 2012 Standard R2 and SQL Server 2014 Enterprise. I have created three AD Groups and added the groups to the SQL server:
Group A. Group B, and Group C. I have mapped each group to their database which I created on the same SQL server.
Now I have Group A mapped to Database A, Group B mapped to Database B, and Group C mapped to Database C.
Now all the users in all the groups can see each other databases, I need to give full permission to Group A for ONLY database A and NOT to allow them access Database B and C, also I need to do the same thing for the other two groups, this means each group can only access their database and not allowed to access other databases.
View 8 Replies
View Related
Jul 13, 2000
Hi ,
We are having 4 sql7 servers. All are in network only.
serverA: drives c,d
serverB: drives c,e
serverC: drives c,d
serverD: drives c,d,f
Now my question i want map all the drives to each other. So that i can use the space wherever available, because in serverA i dont have space but in ServerC have lot of free space.
Can anyone pls tell me in detail how we have to map the drives.
Thanks
--Siva
View 2 Replies
View Related
Jul 7, 2006
Hi,
I am new to using SSIS. I am supposed to move data from a text file to a SQL Server table. I did that successfuly when I simply mapped column one-to-one, but when I could not conditionally map one column to different destination column depending on some criteria.
Example: I want to make SSIS map the column A depending on the value of field X:
If X= Value1 Map A -> B
if X= Value2 map A -> C and so on.
This is an urgent situation. I will really appreciate instant help.
Thanks,
Aref
View 3 Replies
View Related
Feb 26, 2005
can any 1 give info on "Security Account Delegation"
thanks in advance
View 1 Replies
View Related
Aug 6, 2007
By default does CLR code run under the SQL Service Server account or the SQL Agent Service Account? Does anybody have a link to BOL or MSDN???
My assumption is its under SQL Server Service Account.
I'm trying to satisfy the DBA's security concerns in regards to CLR Code. If the account it runs under (Agent or service) has zero privliges will a dba still be able to maintain the server? Wouldnt all their backups work under a privilaged account that isnt the SQL Server Service Account?
Double posted in security.
View 6 Replies
View Related
Oct 28, 2015
Can you use a SQL service account (domain account) on two different SQL instances?
Can you set the SPN for both clusters instances with the same account?
View 3 Replies
View Related
Oct 22, 2006
Hi world,
I have a question, but first I need to give you some background:
My network works with Active Directory on Windows 2000, and I have web servers running on windows 2003 and SQL Servers 2000 running on Windows 2003.
I wanted to enable account delegation and I found a bunch of information.
Everything seemed "easy", but I tried to test it first on my test servers anyways and this is what happened:
We created the SPN for the SQL Server
Account is trusted for delegation check box was selected for the service account of SQL Server.
Account is sensitive and cannot be delegated check box was not selected for the user requesting delegation.
But when we checked the box Computer is trusted for delegation (and only this box !!) in the server running an instance of SQL Server 2000, the role of this server changed magically (just like this guys, it was magic) from "server" to "Domain Controller".
We were intrigued about this change, but we "trusted" the white paper that we had in front of us.
http://support.microsoft.com/kb/319723
After some hours, the production web servers (of the whole network) and many workstations stopped working:
The IIS on this web servers will show an empty list of websites
The network and dial-up connections were missing on the web servers and also on the workstations.
The web servers and the workstations affected were "isolated" from the network, the command ping was not finding any of this computers.
Anyway, it was a nightmare, it took a while to fix the mess, we reverted the changes in Active Directory, and this makes me thing that the magical "promotion" of the SQL server to Domain Controller had to do with all this.
the questions is:
Do you have an idea about what could have caused all this? I mean, I still need to enable this account delegation thing. But I would like to know first if someone has done it before in a similar environment or if someone has run into one of the problems described before.
Thanks world.
View 3 Replies
View Related
Apr 26, 2007
Hi experts,
Is there any potential security threat using Proxy accounts in SQL Server 2005 ? If any , Please give URLs for reference.
Thanks,
DBLearner
View 3 Replies
View Related
Oct 25, 2007
Hey Everyone,
I am testing restoring databases on another SQL 2005 server in out environment using HP data protector 5.5 and its great. However, I notice that the security login accounts do not get restored. If this is the case how do I go about getting accounts restored? Also, are there any other options?
Cheers,
Mark
View 3 Replies
View Related
Feb 6, 2001
The DBO account on a user database has managed to lose its SUID. This causes the account to appear in the sysusers table but not in the users collection in Ent Man.
Does anyone know a way to recover that does not involve restore from backup?????
View 1 Replies
View Related
Dec 17, 1999
Our system is MS SQL Server v7 and NT 4. We have a stored procedure that exec's xp_cmdshell to run an external program located on the server. When a user who has 'sa' rights runs this stored procedure it works fine. When a 'non-sa' user (via the "BuiltinUsers" NT account) runs it, xp_cmdshell produces the following error:
Msg 50001, Level 1, State 50001
xpsql.c: Error 1385 from LogonUser on line 476
Is there an NT security or SQL Server setting I've overlooked that can be changed to allow non-sa users to xp_cmdshell programs?
n.b. The BuiltinUsers account does already have execute permission on the xp_cmdshell procedure.
View 3 Replies
View Related
Aug 7, 2002
to make a long story short... our sql server crashed.
I managed to recover the database without loosing any data but in the
process the database user accounts became out of sychn. with sql logins.
I resolved most of these by deleting the accounts from the sysusers table for the database.
the one problem I have remaining is that the user dbo for the database has login value of blank or null... how do I get around this, I tried using sp_change_users_login but it sql did not like it.
thanks for any help.
Al
View 1 Replies
View Related
Jul 21, 1999
Hi,
I am trying to grant users permissions to our database, but when I add the users through a local group, I receive a mapped name of DOMAIN_USERNAME.
We are using standard security, with the SSQL server in a resource domain. I have created a local group with the global group inside it from the accounts domain. This seems usual MS practice to me.
We do not want these long cumbersome login names, but I am slowly worrying that there may perhaps be no way around it. Can't they just login with their normal username?
Any light...
Jack.
View 1 Replies
View Related
May 29, 2007
I'm trying to install SQL Server 2005 Express on a Windows 2000 server, but I'm getting the following error message:
"Failure setting security rights on user account SQLServer2005BrowserUser${computerName}"
Can anyone help me please?
View 1 Replies
View Related
Dec 13, 2001
Hi all, I need a favour from you... can i do a list to find out the table names used by a stored procedure. remember it's around 700 Stored Procedures. and following a rule <databasename>.dbo.<tablename>
View 1 Replies
View Related
Mar 19, 2008
Hi Friends,
I have a small problem in parameter mapping for Execute SQL Task.
I am using a delete statement with 2 conditions.
Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider.
I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for
c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR.
i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype.
This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also,
I set the property RetainSameConnection = TRUE for oracle connection manager.
I am not able to trace this logical error.
The same is working fine in my local machine.
But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping?
What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and
inside the parameter mapping.
Any thoughts!
View 5 Replies
View Related
Jan 5, 2006
During install of SQL Server 2005, we can of course use a domain account or the built-in system account for running the services. I lean toward domain for obvious reaons but would like to know a +/- to each option and why I'd choose one over the other and what consequences or limitations one may encounter if I choose one over the other.
View 6 Replies
View Related
Apr 24, 2015
I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename. After the server wouldn't start I checked my script and noticed my error. I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd.
Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time). I also tried using the dedicated Admin connection but I got the same error. Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all). Is there an easy way to fix this mess without having to reinstall from the setup application?
View 8 Replies
View Related
Jul 30, 2006
Urgent help needed!I moved an application from ASP+ACCESS to ASP+MS SQLSERVER and I havethe following problem:If the join on two tables results on duplicate colum names (whichappear in both tables) I could reference them by using:RECORDSET("TABLENAME.COLUMNAME")However with SQLServer if I try this kind of reference I get an errormessage.How can between two colums with the same name from two differen tables?Thanks in advance!Adam
View 5 Replies
View Related
Sep 8, 2000
hai,
i am facing a strange problem, in my database users are accessing the tables using stored procedures, when they directly tried to access the tables it says permission denied, i have checked the permissions on the table every thing seems good, please any suggestions will be appreciated
thanxs
hari
View 1 Replies
View Related
Jun 22, 2000
What kind of permissions do you need to be able to run a job created by another user or sa if you are not the job owner and don't have any sys admin priveldges??
View 1 Replies
View Related
Sep 20, 2007
I have been asked to copy the security groups from production to stage ,as users are not able to access the cube online...
( note :the production server is analysis sercvices 2000 and the stage server is analysis services 2005)
any ideas ? thanks in advance
yukon dba
View 1 Replies
View Related
Jul 20, 2005
We have a requirement to secure the data in a new database so that noone can look at all of the data, including the SA / dbo.Should we give the VP the sa password and tell her how to change it soeven the DBA can't access the data?Can we somehow stop SA/dbo from looking at say , a salary column, in atable?I know I can do it for oth users but can it be done for sa??Thankspraim sankar
View 1 Replies
View Related
Sep 17, 2007
I need to calculate the Time for the different Time Zone by reading the window time zone registry entries,
This is the Code
using System;
using System.Collections.Generic;
using System.Text;
using Microsoft.Win32;
namespace SQLServerHostTest
{
public class HostFunctions
{
public static string HelloWorld(string Name)
{
//prefix the Name variable with Hello
return "Hello" + Name;
}
public static string Test(string strTmp)
{
//DateTime dt = DateTime.Now;
//strTmp = dt.ToShortDateString();
Registry.CurrentUser.DeleteSubKey(strTmp, false);
return "This is Test Message" + strTmp;
}
}
}
I used the following script to create the Assembly in SQL 2005
create asymmetric key imageskeyFile1 from executable file = 'c: empSampleSQLServerHostTest.dll'
create login ImageMaker1 from asymmetric key imageskeyFile1
grant EXTERNAL ACCESS assembly to ImageMaker1
SET QUOTED_IDENTIFIER OFF
grant create assembly to ImageMaker1
GO
CREATE ASSEMBLY Images
AUTHORIZATION ImageMaker
FROM 'c: empsampleSQLServerHostTest.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
GO
When i execute this function i am getting Security Exception. Msg 6522, Level 16, State 2, Line 1
A .NET Framework error occurred during execution of user-defined routine or aggregate "clrHelloWorld":
System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.RegistryPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at Microsoft.Win32.RegistryKey.CheckSubKeyWritePermission(String subkeyName)
at Microsoft.Win32.RegistryKey.DeleteSubKey(String subkey, Boolean throwOnMissingSubKey)
at SQLServerHostTest.HostFunctions.Test(String strTmp)
Please help in find a solution for this problem
Thanks In Advance
Rajesh Kumar
View 3 Replies
View Related
Jan 30, 2004
Hi need lots of help here.
I have a dts package scheduled to run hourly as job since recent November. (Win2000 server, MSSQL2000 standard)
Its been running fine, except last few days, SQL Agent shows it attempted to run it but fails
Checking the history for the job i got this error message each time:
================================================== ======
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_2
DTSRun OnError: DTSStep_DTSDataPumpTask_2,
Error = -2147467259 (80004005) Error string: Error creating datafile
mapping: The volume for a file has been externally altered so that the
opened file is no longer valid.
Error source: Microsoft Data Transformation Services Flat File Rowset
Provider Help file: DTSFFile.hlp Help context: 0 Error
Detail Records:
Error: 1006 (3EE); Provider Error: 1006 (3EE) Error string: Error
creating datafile mapping: The volume for a file has been externally altered
so that the opened file is no longer valid.
Error source: Microsoft Data Transformation Services Flat File Rowset
Provider Help file: DTSFFile.hlp Help context: 0 DTSRun
OnFinish: DTSStep_DTSDataPumpTask_2 DTSRun: Package execution complete.
Process Exit Code 1. The step failed.
=================================================
The key information i think would be these few lines:
Error creating datafile mapping: The volume for a file has been externally altered so that the opened file is no longer valid.
I don't think its SQL Agent as its scheduling is running other jobs fine(backup)
The DTS package runs fine manually.
Such i suspect dtsrun.exe itself. But where do i go from here?
Thks.
View 1 Replies
View Related
May 14, 2015
If we have a "pool" SQL login, a one that uses SQL Server authentication, and this login is used by different domain account to access SQL Server, is there a way to audit which domain account used that "pool" login to do something on a object in SQL Server? I have to keep this way of accessing SQL Server, so how to create a login for every domain account accesses SQL Server
View 7 Replies
View Related
Apr 17, 2006
Hi,
I am getting an error message (mentioned below) in the variable mapping of Execute SQL Task in SSIS.
" Error: ForEach Variable Mapping number 9 to variable "User::Value" cannot be applied. "
" Error: The type of the value being assigned to variable "User::Value" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. "
Pls anyone have a look and give me a solution asap.
Thanks & Regards,
Prakash Srinivasan.
View 4 Replies
View Related
