Urgent!! - SQL Server Failing On A Clustered Environment -
Oct 10, 2001
Hello,
Yesterday, our server 'failed over' to the passive node in our clustered environment. We are running Windows NT, with MSSQL 7.0. What triggered the fail over, according to the logs, was an error in tempdb. Basically, the error said that tempdb could not be expanded, (could not create any more space for tempdb).
The drive that tempdb database is located on has more than enough room. The tempdb is set at 300M, and can grow to over 700M. The drive that tempdb is on
has over 19Gig of space on it.
One other important piece of information is that the drive where our production database is on and the tempdb is quite full. The 19 gig that is left over represents only about 5 percent of the disk.
Can anyone shed some light on why the sql server would have failed over when trying to expand tempdb, when there was sufficient resources to handle that growth? Am I barking up the wrong tree? Could this be another error? When we restarted the server (both nodes and the disk array) the production database came back as suspect. Most of the stuff in BOL points to the space issue. The production database is around 37 gig.
Any help would be appreaciated
thanks,
jim
View 1 Replies
ADVERTISEMENT
Oct 4, 2007
I am looking at combining / consolidating some of our servers and was wondering if I can install SQL 2000 and SQL 2005 in a clustered Environment on a san.
Cheers
Angie
View 6 Replies
View Related
Aug 9, 2006
We are running 2 SQL Server and both run in failover clustered Environment.
The Problem is now we need to Replicate a Database from one Virtual SQL Sever to the other.
The Second one (clusterd environment)is stroing their database localy while the First One (clustered environment)is storing database in a shared storage.
Note that Both Server are used for sperate purpose , but we now need to set replication on the Other Clustered Setup for Reporting Purpose.
Will it work if we configure replication from One SQL Server Clustered Setup to the Other Clstered Setup.
If yes, then please let me know how it can be done ?
Thanks
View 1 Replies
View Related
May 20, 2008
I am running into an issue trying to uninstall SQL Server 2005 64-bit. It hangs at the same point: Removing backup files. I then get a message that, "The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it." The instance that I am trying to uninstall is in a cluster hosting two other SQL Server installations. I have tried a few combinations when attempting to uninstall: running the cluster group containing the server I am uninstalling on a different cluster node than all the other cluster groups; running them all on the same node. The only one I haven't tried is moving the Cluster Group containing the IP address of the cluster, cluster name, etc to another node while running the other groups on the other node. Has anyone run into this issue? Each of the nodes has been rebooted several times during these attempts and we are using Windows Server 2003 Clustering. Again, the hang happens at the same point every time. The exact error(s) from the even log are as follows:
Product: Microsoft SQL Server 2005 (64-bit) -- Error 29528. The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
Product: Microsoft SQL Server 2005 (64-bit) -- Error 29530. Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.
)
Thanks,
Todd
View 6 Replies
View Related
Aug 6, 2015
Would it be possible to disjoin the SQL Server Clustered environment to a new domain without having to reinstall the cluster?
disjoin
e.g 2 node activeactive cluster with 4 named instances. SQLserver1.dn.za; SQLserver2.dn.za; SQLserver3.dn.za;SQLserver4.dn.za
servernode1.dn.za; servernode2
re-join them as SQLserver1.dn.ra; SQLserver2.dn.ra; SQLserver3.dn.ra;SQLserver4.dn.ra
servernode1.dn.ra; servernode2.dn.ra
What would be the impact on the servers, will they be able to resolve the new dns.?
View 1 Replies
View Related
May 14, 2015
How can i add additional SQL server instance to existing clustered environment on SQL 2005.
View 7 Replies
View Related
Jun 20, 2007
I am embarking on a project to upgrade our SQL server environment. I'm curious for some opinions on the relative benefits of Log Shipping versus a Clustered environment and you have any experience that has helped form your opinion on the issue?
Thanks,
Marc
View 3 Replies
View Related
Feb 13, 2008
I have a two node failover cluster(Active/Passive). I am planning on installing the Report Server database on the failover instance.
Do i need to install RS on both the nodes?
thanks?
View 3 Replies
View Related
Jul 19, 2000
I get the following error when trying to execute a call to a procedure located on a linked server. My source server is within a clustered environment.
"Could not relay results of procedure % from remote server %."
Straight select T-SQL calls work fine.
Could anybody help?
View 2 Replies
View Related
Jun 8, 2007
Can someone tell me how to make a backup in a sql clustered environment (MSSQL 2000) and how to restore that backup in clustered environment (MSSQL2005)? A step by step backup and restore procedure is appreciated.
View 5 Replies
View Related
Jun 27, 2006
Hi can anyone help with a step by step instructions on how to set up log shipping in a clustered envionment?
I aware that your need to set up a clutered share but am looking for as much details as possible.
Thank your for your help in advance.
View 2 Replies
View Related
Jul 23, 2005
Hi All,[color=blue]>From last 2 weeks I am despirately trying to get the installation steps[/color]of R/3 4.7 on SQL server 2000 on Windows 2k or 2003 server. This is fora distributed environment, I mean central instance on the centralinstance host and the database instance on the on the database instancehost. I got a few response, which is highly appriciable and I respectfor those SAP gurus in order to providing me the valuable inputs. Butif some one has realy done the installation on disrtibuted environmentearlier, please forward me the document for installation. Its an urgentneed. I hope you all are understanding my position.With Regards,Mike Johns
View 3 Replies
View Related
Sep 10, 2015
Is it possible to use registered servers feature in clustered environment and with different versions of Sql server like 2012 & 2014.
View 0 Replies
View Related
Jul 20, 2007
I am able to send databasemail on my staging servers which are non clustered but databasemail fails on my clustered production servers.
Both production and staging servers sit on the same domain(although the domain controller is sitting on one of the staging servers)
I have set up the account and profile and have double checked that it is pointing to the correct SMTP server and to the same one as the staging servers.
I have also enabled database mail in surface area configuration.
The message gets queued, because i see the 'mail is queued' message.
The databaseMail Process also gets started, but during the actual send process I see
The following is the error in the databasemail log.
Any ideas what could be my problem?
Databasemail Log
Date 18/07/2007 18:49:17
Log Database Mail (Database Mail Log)
Log ID 14
Process ID 964
Last Modified 18/07/2007 18:49:17
Last Modified By TT-IXTOOLSixtools
Message
1) Exception Information
===================
Exception Type: System.NullReferenceException
Message: Object reference not set to an instance of an object.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.SessionManager.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
btw, I ran this command to send mail
declare @body1 varchar(100)
set @body1 = 'Server :'+@@servername+ ' My First Database Email '
EXEC msdb.dbo.sp_send_dbmail @recipients='mytestemail@email.com',
@subject = 'My Mail Test',
@body = @body1,
@body_format = 'HTML' ;
View 5 Replies
View Related
Nov 27, 2007
We will be implementing our first SQL cluster in December. Our current plan calls for a shared development/test database server with one physical server, but two SQL Server instances. Our production environment will be a SQL cluster. Is it necessary to create a clustered test environment for testing patches, hot-fixes, etc...?
Thanks, Dave
View 2 Replies
View Related
Oct 25, 2015
I am trying to set up log shipping in a clustered server environment. I am pretty confused about the location of the shared folder to be created to put backup created by log shipping job. Which drive should I use either local or clustered shared drive to store the backups in primary server and to copy the same in secondary Server?
View 2 Replies
View Related
Jan 31, 2007
I've seen other posts on this topic, but not with error 0x32.
I was attempting to change a CLUSTERED instance of SQL 2005 from dynamic port to static port and in the process have somehow messed it up to the point it will no longer start. Version is 9.00.2047.00
The ERRORLOG has the following
2007-01-31 15:02:05.77 spid9s Starting up database 'model'.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1c.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1.
2007-01-31 15:02:05.77 Server Error: 17826, Severity: 18, State: 3.
2007-01-31 15:02:05.77 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-01-31 15:02:05.77 Server Error: 17120, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
The values have only been changed using SQL Server Configuration Manager (no direct registry changes have been made).
Thanks for you help.
View 1 Replies
View Related
Feb 13, 2002
Sql Guru's,
I have some DTS packages some times failing.one day sucess and next day it's failing. The following error showing.
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147217900 (80040E14) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7312 (1C90) Error string: [OLE/DB provider returned message: Timeout expired] Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_3 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRu... Process Exit Code 1. The step failed.
Any body help me. This is very urgent
View 2 Replies
View Related
Jul 27, 2001
When I change the SA password on my server the current Scheduled SQL Jobs no longer work. If I run DTS packages by themselves and not from the Scheduled job window they work fine. I am using the sa as the Owner of the jobs and my SQL Agents services use a Domain Account. If I rebuild the jobs after the sa password is change they work fine. However, I don't want to rebuild 100 jobs every time I change my SA password.How can I fix or get around this problem without rebuilding my jobs?
View 5 Replies
View Related
Jan 5, 2005
Folks, this is the error i get when backing up user db to local disk:
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionRead (WrapperRead()).
Server: Msg 11, Level 16, State 1, Line 0
General network error. Check your network documentation.
10 percent backed up.
Connection Broken
If i copy a file (2gb) to local disk from network it works. The disk have much space. Any ideas;;; :confused:
I get the same error when backuping up even MSDB to a network path using UNC [\].
View 9 Replies
View Related
Aug 24, 2006
Hello,
How do I restore a sql database that is on a clustered server from a sql database backup file that is on a non_clustered server?
Thanks,
Serey
View 3 Replies
View Related
Jan 4, 2008
I have large table with 10million records. I would like to create clustered or non-clustered index.
What is the quick way to create? I have tried once and it took more than 10 min.
please help.
View 1 Replies
View Related
Nov 16, 2005
I have finished a change request from our client. I need to update clients' database with the one in developments.Here is the changes i made to database:Added/Changed some tablesAdded/Changed some stored proceduresAdded data to some dictionary tableThe data in clients' current database MUST be kept. So how can I merge the changed information to clients' database?
View 3 Replies
View Related
Feb 4, 2015
We have a table, which has one clustered index and one non clustered index(primary key). I want to drop the existing clustered index and make the primary key as clustered. Is there any easy way to do that. Will Drop_Existing support on this matter?
View 2 Replies
View Related
Jun 25, 2015
I have a requirement to only rebuild the Clustered Indexes in the table ignoring the non clustered indexes as those are taken care of by the Clustered indexes.
In order to do that, I have taken the records based on the fragmentation %.
But unable to come up with a logic to only consider rebuilding the clustered indexes in the table.
create table #fragmentation
(
FragIndexId BigInt Identity(1,1),
--IDENTITY(int, 1, 1) AS FragIndexId,
DBNAME nvarchar(4000),
TableName nvarchar(4000),
[Code] ....
View 5 Replies
View Related
Sep 4, 2015
We are going to use SQL Sever change tracking. The problem is that some of our tables, which are to be tracked, have no primary keys. There are only unique clustered indexes. The question is what is the best way to turn on change tracking for these tables in our circumstances.
View 4 Replies
View Related
Aug 28, 2015
I desire to have a clustered index on a column other than the Primary Key. I have a few junction tables that I may want to alter, create table, or ...
I have practiced with an example table that is not really a junction table. It is just a table I decided to use for practice. When I execute the script, it seems to do everything I expect. For instance, there are not any constraints but there are indexes. The PK is the correct column.
CREATE TABLE [dbo].[tblNotificationMgr](
[NotificationMgrKey] [int] IDENTITY(1,1) NOT NULL,
[ContactKey] [int] NOT NULL,
[EventTypeEnum] [tinyint] NOT NULL,
[code]....
View 20 Replies
View Related
Jul 19, 2013
I have created two tables. table one has the following fields,
Id -> unique clustered index.
table two has the following fields,
Tid -> unique clustered index
Id -> foreign key of table one(id).
Now I have created primary key for the table one column 'id'. It's created as "nonclustered, unique, primary key located on PRIMARY". Primary key create clustered index default. since unique clustered index existed in table one, it has created "Nonclustered primary key".
My Question is, What is the difference between "clustered, unique, primary key" and "nonclustered, unique, primary key"? Is there any performance impact between these?
View 5 Replies
View Related
Sep 8, 2006
Hi there, I have a table that has an IDENTITY column and it is the PK of this table. By default SQL Server creates a unique clustered index on the PK, but this isn't what I wanted. I want to make a regular unique index on the column so I can make a clustered index on a different column.
If I try to uncheck the Clustered index option in EM I get a dialog that says "Cannot convert a clustered index to a nonclustered index using the DROP_EXISTING option.". If I simply try to delete the index I get the following "An explicit DROP INDEX is not allowed on index 'index name'. It is being used for PRIMARY KEY constraint enforcement.
So do I have to drop the PK constraint now? How does that affect all the tables that have FK relationships to this table?
Thanks
View 3 Replies
View Related
Nov 24, 2014
What is the easiest way to remember the definitions of clustered and non clustered indexes.
View 9 Replies
View Related
Sep 30, 2015
I have a really super slow stored proc that does something simple. it updates a table if certain values are received.
In looking at this the matching is done on the Primary Key, which is set as a Clustered index, looking further I have another constraint, that sets the same column to a Unique, Non-Clustered.
I am not sure why this was done, but it seems to be counter productive. I have read only references to Which one is better on a primary key, but not can their be both and if it is "Smart".
View 4 Replies
View Related
Feb 26, 2008
Hello,
I've a table with primary key defined as non-clusterd, now without dropping it can I modify the existing index to clustered through tsql as I had to write some migration script and in that script I wanna do this.
Thanks in Advance,
Rohit
View 5 Replies
View Related
Oct 26, 2000
hi, I have settup up sql mail and did the following:
1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook
2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services
3. I used the profile that I created in outlook to test the sql mail but got an error:
Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI
Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account
I do have a valid domain account
I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
View 1 Replies
View Related
