Urgent!!! - Tempdb Out Of Control
Sep 6, 2000
Tempdb has grown to over 17 GB. It had no max growth limit set and actually took up all the disk space on the drive. I tried to run DBCC SHRINKDATABASE and received a bunch of errors about table corruptions. So, I found Brian Knight's post about stopping and restarting tempdb in minimal mode. I did that. It came back up and tempdb was correctly only 2 MB. It freed up 17 GB on the disk. Then, I stopped and restarted the service again, not in minimal mode, and it won't come back up. It has taken back that 17 GB of disk space. From the error log, I can see that it is stuck on rebuilding tempdb. Why is it trying to rebuild tempdb to 17 GB???
While in minimal mode, we did set the maximum growth limits to 1 GB for both data and log for tempdb, but that seemed to have no effect.
Any suggestions????
View 3 Replies
ADVERTISEMENT
Mar 22, 2004
Hi all.
I have a db application that has been running fine for months. Volumes have been gradually increasing and one day the system locked up.
A stored proc that typically ran in 3 or 4 minutes never returned. The tempdb kept expanding to fill available disk space (100GB). This was the offending statement inside the stored proc:
INSERT INTO cpp (CPPDate,MerchantLink,ReportNumber,FromDate,ToDate ,TransThreshold,DayThreshold,CPPType)
SELECT S.CPPDate,S.MerchantLink,s.ReportNumber, s.FromDate,s.ToDate, S.OccurThresh,s.DaysThresh,'D'
FROM #stuff S, Trans T with (nolock), Supplier P with (nolock)
where T.MerchantNumber in (SELECT MerchantNumber FROM Merchant WHERE MerchantLink = s.MerchantLink)
AND T.TranDate >= S.FromDate
AND T.TranDate <= S.ToDate
AND T.LoadDate <= @ReportDate2
AND (T.SupplierNumber = P.SupplierNumber
AND T.IncludeInCpp = 'Y'
AND P.CountryNumber IN (SELECT CountryNumber FROM REPORTCOMBO WHERE ReportNumber = s.ReportNumber))
GROUP BY CPPDate,Merchantlink,ReportNumber, FromDate,ToDate, OccurThresh, DaysThresh
HAVING COUNT(DISTINCT T.AccountNumber) >= OccurThresh
I realize that a "group by" uses the tempdb, but can't figure out why it would go away rather than returning an error.
I have a workaround in place now. I split this big query into several steps using a cursor. (slower and clumsier, but it works) Statistics are updated daily, i have tried defragging, and reindexing with no success.
Any thoughts would be appreciated. If you need any more details, please let me know.
Thanks in advance.
View 3 Replies
View Related
Jul 18, 2006
Over weekend my tempdb grew 118 gig usually 1 gig.
I did shrink on it ...and its fine now.
But how to determine what could have caused this..
How can i say it was this process or this job ...any ideas.
Thanks
View 10 Replies
View Related
Jul 23, 2005
I have a very big table with 20 million records DistinctProjectionKeywhich i join several times to different tables in this query.select distinct distinctprojectionkeyid,dpk.MarketID,dpk.Classificationid,dpk.DistributorID,dpk.ManufacturerID,dpk.LocationID,dpk.TimeID,P4.FACTOR as factor1,P3.FACTOR as factor2 ,P2.FACTOR asfactor3,P1.FACTOR as factor4into Projectionfactors1FROM DistinctProjectionKey dpk INNER JOIN D_Time tON t.TimeID = dpk.TimeIDINNER JOIN (select * from (select distinctClassificationID_Major,'fam' as lab fromStagingOLTP..ClassificationFlat) cf1)cfON cf.ClassificationID_Major = dpk.ClassificationIDLEFT OUTER JOIN StagingOLTP..ProjectionDefaultFlat p4ON t.TheDate = p4.TheDateAND p4.Name = 'FAM'AND cast(cf.Lab as varchar(20)) = cast(p4.Lab as varchar(20))AND dpk.MarketID = p4.MarketIDAND p4.ManufacturerID IS NULLAND p4.ClassificationID IS NULLLEFT OUTER JOIN StagingOLTP..ProjectionDefaultFlat p3ON t.TheDate = p3.TheDateAND p3.Name = 'fam'AND cast(cf.Lab as varchar(20)) = cast(p3.Lab as varchar(20))AND dpk.MarketID = p3.MarketIDAND p3.ClassificationID = dpk.ClassificationIDAND p3.ManufacturerID IS NULLLEFT OUTER JOIN StagingOLTP..ProjectionDefaultFlat p2ON t.TheDate = p2.TheDateAND p2.Name = 'fam'AND cast(cf.Lab as varchar(20)) = cast(p2.Lab as varchar(20))AND dpk.MarketID = p2.MarketIDAND p2.ManufacturerID = dpk.ManufacturerIDAND p2.ClassificationID IS NULLLEFT OUTER JOIN StagingOLTP..ProjectionDefaultFlat p1ON t.TheDate = p1.TheDateAND p1.Name = 'fam'AND cast(cf.Lab as varchar(20))= cast(p1.Lab as varchar(20))AND dpk.MarketID = p1.MarketIDAND p1.ManufacturerID = dpk.ManufacturerIDAND p1.ClassificationID = dpk.ClassificationIDthe other table have fewer number of records .I find that when I try to do the insert tempdb goes out of control ,itgrows above 100 GB?Would anyone know the reason why and the solution to apply to avoidthis problem?The other tables have fewer recodsClassification flat has 5000 records and projection default flat has32652 records.AjayAjay
View 2 Replies
View Related
Jul 18, 2001
I am finding the following error on the error log:
The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space..
What shall we do,it's a B2B production SQL server.
Thanks.
View 1 Replies
View Related
Dec 28, 1999
Hi,
I am installing the SQL server 7.0 as a production server and as soon as the server is started, within a week the date will be around 10 millinon rows, so I want to know how much space should I allocate for the tempdb and what should be the incremental percentage of the the tempdb(New server).
thanks in advance,
Madhu.
View 2 Replies
View Related
Jan 3, 2000
Hi,
I am installing the sql server 7.0 as a production server and when I create a database, I want to give my path of the tempdb on the other drive, when I am trying to change the path it is not allowing, Is it possible to change the path of the tempdb on the other drive. can any one give me the solution how can I change the path of the tempdb when I create a data base.
Thanks in advance.
bye,
Madhu.
View 2 Replies
View Related
Aug 28, 2002
I received the error from a SQL server "..can't allocate space for object "syslogs" in DB "tempdb". If you ran out of space in "syslogs" dump the trans log, otherwise , user alter database of sp_extendsegment to increase the size of the segment."
All help would be appreciated to overcome this error.
Thank You.
View 1 Replies
View Related
Feb 25, 2004
Hi All,
Sql Server 7
My tempdb is eating 1.27 gb of space of my d dive, and now only 10 mb is left in d drive . for this i stoped and started sqlserver but it didnt release much of space.Pls let me know is there any other way so that i can release some space from my tempdb.
Waiting for reply
TIA
Adil
View 5 Replies
View Related
Nov 6, 2007
i have another problem with my library...
i create a library with a datagridview, that i polute manually from several database querys...
thats just fine.... works excelent..
but if i browse the aspx page from another computer on the network, when the code tries to read the data set give me an error
Cannot find the table 0
seems like a problemwith the connection or the query, but if i browse the page from the localmachine i works just fine
please help
Public MM_CONEXION_STRING As String = "server=HP001SQL2000;uid=xxx;pwd=xxxxx;database=GSSDOTNET;"Dim myConnection As New SqlConnection(MM_CONEXION_STRING)Dim myCommand As New SqlCommand(SQL, myConnection)
myConnection.Open()Dim objDS As New System.Data.DataSet()
objDS=myCommand.ExecuteReader()For Each FILA As System.Data.DataRow In objDS.Tables(0).Rows .......
Next
View 2 Replies
View Related
Oct 16, 2007
Ok here is what I have
Department:A
Line 1 Name: George
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
125254 Test 10
Total: 80% 40
Name: Mik
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
Total: 70% 30
Name: Jonathan
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
Total: 70% 30
Line 10
Line 15 Total for this division: 33% ((100 )/3) 100
Department:B
¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦..
Here is what I did I have a list control that is grouped by department. this will get me the info from Line 1 to Line 10 then this list control is actually under another list control that is grouped by department to get the info from Line 15. I used this example for simplicity and what I am doing is fairly similar to this situation. My problem is, I need to find away to know how many totals I have to count the total for the entire department. In other words : from the example above how can I know I have to divide by 3 to get 33%. I can get the 100 without any problem but I cant tell what number I need to divided by. I tried to use Count(Name.Field) I was hoping this will give me 3 which indicates the divided number. But I was getting 7 for some reason.
How can I get the number of times the list control was implemented for one department which is in this case 3?
thanks
View 2 Replies
View Related
Jul 14, 2004
Has anyone seen the SQL Server error:
"tempdb is skipped. You cannot run a query that requires tempdb"?
We're running a .Net web application with a SQL Server 2000 backend, and we get the error intermittently. Restarting the SQL Server service seems to fix it, as it causes tempdb to be rebuilt, but this isn't a long term solution. Any direction or hints would be greatly appreciated. Thanks!
- Mike
View 11 Replies
View Related
Jan 27, 2008
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
View 5 Replies
View Related
Oct 25, 2007
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies
View Related
Mar 20, 2007
UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
View 1 Replies
View Related
Sep 27, 2000
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
A connection could not be estabished to server--Timeout expired
Please verfy SQL Server is running and check your SQL Server registration properties and try again.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
Please help!!!
View 3 Replies
View Related
Oct 26, 2000
hi, I have settup up sql mail and did the following:
1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook
2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services
3. I used the profile that I created in outlook to test the sql mail but got an error:
Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI
Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account
I do have a valid domain account
I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
View 1 Replies
View Related
Mar 23, 2001
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed.
I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment.
The error is:
19015: The encrypton is required but no available certificat has been found.
Please help me to start sql server.
Thanks.
Michel
View 4 Replies
View Related
Jul 6, 2000
Hello,
I am facing a huge problem in my sql server database using access as a front end.The main problem is trying to execute queries "views" ,since they reside on sql server now,and using variables or parameters in reports and forms to filter on this query.
Ex.
how can the following be implemented using the same query but in sql server?
Access
------
SELECT MAT_Charts.YYYYMM
FROM MAT_Charts
WHERE ((([Area_Code] & "-" & [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
GROUP BY MAT_Charts.YYYYMM;
It is specifically this statement in which I am interested:
[GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
Thank you very much for your concern.
View 2 Replies
View Related
Dec 20, 2000
Hi everybody,
I have a batch which needs to be run every day night at 2:00 am.I Using At command but it is not working. if u have idea, please let me know
I AM USING THE FOLLOWING COMMAND :
AT 2:00AM C:SCHED.BAT
Thanks in advance
Krishna
View 3 Replies
View Related
Apr 19, 2008
hi all
its urgent really urgent
please reply soon
I am getting error in sysindexes when i run dbcc checkdb on a production db.
the error is Server: Msg 8928, Level 16, State 1, Line 1
please help me to remove this
all the options of dbcc checkdb as well as table are not helping me
thanks in advance
View 4 Replies
View Related
Jun 1, 2005
TempDB is one of the databases equipped with MSSQL Server by default.What is the purpose of it?Why do we use this temp database?
View 4 Replies
View Related
Apr 9, 2002
Hi,
THis is sql server 6.5 question.
I have tempdb data device size default 2 MB, which has completely filled up. I am trying to expand data device to it.
I created new device tempdb_data_ext (250 MB) and tried to expand tempdb data device. But everytime I do it, it ends up adding space to tempdb log device. How can I expand tempdb data device?
It's extremely urgent.
Thanks
View 1 Replies
View Related
Apr 16, 2001
Hi,
How can I control the growth of tempdb in SQl server.It's growing like anything.
CAn I create some alerts or jobs and what those alerts/job are supposed to do?
All help appreciated.
Jai
View 1 Replies
View Related
Jun 27, 2001
Hello!
This is error message I discovered in NT even viewer:
c:MSSQL7DATATEMPDB.MDF: Operating system error 112(There is not enough space on the disk.) encountered.
In SQL Server error log the errors are:
Error: 1101, Severity: 17, State: 10
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth..
Currently tempdb rezides on C drive and it's almost out of space.
What should I do?
Detach tempdb and then move to different drive?
What's the procedure?
Thanks
Lena
View 4 Replies
View Related
May 10, 2000
TEMPDB in one of our production servers does not clear up so every three to four weeks I have to restart NT. Nothing like this happens on any of the other three servers. Does anybody know where I should look at to correct the problem. I sure would appreciate it.
Thanks
Shashu
View 2 Replies
View Related
Feb 2, 2001
I have never done this before and thought I would ask. Is it possible to detach the tempdb database, move it to another drive or partition, and then re-attach it? What would be the downside or side-affects to doing such a thing?
Thanks. JT
View 2 Replies
View Related
Jan 17, 2001
We want to shrink the size of our TEMPDB , Does anyone know how to without blowing it away and re creating it.
Also, our tempdb expands to occupy all available space on the server, the space is not released until the server is restarted.
Any ideas would be appreciated.
View 3 Replies
View Related
Oct 18, 2000
Hi why I cannot backup the tempdb. Is this a normal or there is something that I am doing wrong.
Ali
View 1 Replies
View Related
Apr 6, 2000
Hi
I get a message:
Error : 933, Severity: 22, State: 1
Logical page 258 of the log encountered while retrieving highest timestamp in database 'tempdb' is not the last page of the log and we are not currently recovering that database.
I use sqlserver -T4022 to start my SQL Server since it will not start with out it. When I start sqlserver without the option, it tells me that
Error : 615, Severity: 21, State: 1
Unable to find database table id = 2, name = 'tempdb'.
I just want my SQL Server back. Please help!
Thanks
Betty Lee
View 4 Replies
View Related
Apr 20, 2000
I need to move tempdb to another drive,also increase the size.Largest database is 15GB.Can anyone suggest the size and also the exact commands to move.Do I need to backup the databases before I do this task?If SP1 is not installed,will it be o.k for me for this tempdb problem.If we have a larger tempdb like 4GB,will it effect anything?...Urgent!!
View 2 Replies
View Related
Aug 29, 2000
The tempdb has grown to over 2 GB on our DB. There are no user tables or SP in it. Is there a way to clean up and are there any consequences to this?
View 4 Replies
View Related
Jan 13, 2000
I read an article on this site by Michael Hotek re "Basic SQL Server 6.5 Configuration Options". In the paragraph about TempDB he says that you should always avoid using Temp tables in stored procs. I use this feature a lot when trying to do "not in" type queries (I filter out a portion of a larger table and then use the "not in" on the temp table rather than the entire table.)
Is there a better way to run a Not in query. I have the table well indexed (i think) but it seems to do a full table scan if I use the entire table.
Any ideas???
View 1 Replies
View Related
