Urgent (The Property ‘DefaultValue’ Of Report Parameter ‘split’ Doesn't Have The Expected Type.)
Aug 2, 2007
Hi,
I have declared an internal paramter and given the default non queried value as
select @split = case when max(rowid)%2 = 1 then (max(rowid)/2) + 1 else max(rowid)/2 end
and when i run it i am getting the error -- The property 'DefaultValue' of report parameter split doesnt have the expected type. What should i do to solve it. Any help is appreciated.
Regards,
Karen
View 1 Replies
ADVERTISEMENT
Apr 22, 2015
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
View 3 Replies
View Related
Jun 16, 2006
I am having problems exporting data into a flat file using specific code page. My application has a variable "User::CodePage" that stores code page value (936, 950, 1252, etc) based on the data source. This variable is assigned to the CodePage property of desitnation file connection using Property expression.
But, when I execute the package, the CodePage property of the Destination file connection defaults to the initial value that was set for "User:CodePage" variable in design mode. I checked the value within the variable during runtime and it changes correctly for each data source. But, the property of the destinatin file connection doesn't change and results in an error.
[Flat File Destination [473]] Error: Data conversion failed. The data conversion for column "Column01" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: The ProcessInput method on component "Flat File Destination" (473) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
If I manually update the variable with correct code page and re-run the ETL, everything works fine. Just that it doesn't work during run-time mode.
Can someone please help me resolve this.
Thanks much.
View 5 Replies
View Related
Jan 22, 2008
Hi,I have setup a report model and am ready to deploy it for the first time. I have had no issues deploying my report definitions so presumably this should be alright.However, trying to deploy it gives this error:
TITLE: Microsoft Semantic Model Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.1399.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<meta name="StackTrace" content=" at Microsoft.ReportingServices.Diagnostics.RSConfiguration.Load()
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.Construct(String configFileName)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration..ctor(String configFileName, String location)
at Microsoft.ReportingServices.Diagnostics.RSConfigurationManager..ctor(String configFileName, String configLocation)
at Microsoft.ReportingServices.Library.Global.get_ConfigurationManager()
at Microsoft.ReportingServices.WebServer.Global.StartApp()
at Microsoft.ReportingServices.WebServer.Global.Application_BeginRequest(Object sender, EventArgs e)" />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError) </li><ul>
<li>Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.</li>
</ul>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</body>
</html>
--. (Microsoft.ReportingServices.SemanticQueryDesign)
I'd greatly appreciate any insight you could give me into fixing this problem.ThanksJohn
View 3 Replies
View Related
Jun 3, 2008
This is nutty. I never got this error on my local machine. The only lower case m in the sql is by near the variable Ratingsum like in line 59.
[SqlException (0x80131904): Incorrect syntax near 'm'.An expression of non-boolean type specified in a context where a condition is expected, near 'type'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +925466 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800118 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) +196 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +269 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 view_full_article.btnRating_Click(Object Src, EventArgs E) +565 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746</pre></code>
Here is my button click sub in its entirety:
1 Sub btnRating_Click(ByVal Src As Object, ByVal E As EventArgs)
2 'Variable declarations...
3 Dim articleid As Integer
4 articleid = Request.QueryString("aid")
5 Dim strSelectQuery, strInsertQuery As String
6 Dim strCon As String
7 Dim conMyConnection As New System.Data.SqlClient.SqlConnection()
8 Dim cmdMyCommand As New System.Data.SqlClient.SqlCommand()
9 Dim dtrMyDataReader As System.Data.SqlClient.SqlDataReader
10 Dim MyHttpAppObject As System.Web.HttpContext = _
11 System.Web.HttpContext.Current
12 Dim strRemoteAddress As String
13 Dim intSelectedRating, intCount As Integer
14 Dim Ratingvalues As Decimal
15 Dim Ratingnums As Decimal
16 Dim Stars As Decimal
17 Dim Comments As String
18 Dim active As Boolean = False
19 Me.lblRating.Text = ""
20 'Get the user's ip address and cast its type to string...
21 strRemoteAddress = CStr(MyHttpAppObject.Request.UserHostAddress)
22 'Build the query string. This time check to see if IP address has already rated this ID.
23 strSelectQuery = "SELECT COUNT(*) As RatingCount "
24 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
25 strSelectQuery += " AND ip = '" & strRemoteAddress & "'"
26 'Open the connection, and execute the query...
27 strCon = System.Web.Configuration.WebConfigurationManager.ConnectionStrings("sqlConnectionString").ConnectionString
28 conMyConnection.ConnectionString = strCon
29 conMyConnection.Open()
30 cmdMyCommand.Connection = conMyConnection
31 cmdMyCommand.CommandType = System.Data.CommandType.Text
32 cmdMyCommand.CommandText = strSelectQuery
33 intCount = cmdMyCommand.ExecuteScalar()
34 intSelectedRating = Int(Me.rbRating.Text)
35 conMyConnection.Close()
36 'Close the connection to release these resources...
37
38 If intCount = 0 Then 'The user hasn't rated the article
39 'before, so perform the insert...
40 strInsertQuery = "INSERT INTO tblArticleRating (rating, ip, itemID, comment, active) "
41 strInsertQuery += "VALUES ("
42 strInsertQuery += intSelectedRating & ", '"
43 strInsertQuery += strRemoteAddress & "', "
44 strInsertQuery += articleid & ", '"
45 strInsertQuery += comment.Text & "', '"
46 strInsertQuery += active & "'); "
47 cmdMyCommand.CommandText = strInsertQuery
48 conMyConnection.Open()
49 cmdMyCommand.ExecuteNonQuery()
50 conMyConnection.Close()
51 Me.lblRating.Text = "Thanks for your vote!"
52 Comments = comment.Text.ToString
53
54 If Len(Comments) > 0 Then
55 emailadmin(comment.Text, articleid)
56 End If
57 'now update the article db for the two values but first get the correct ratings for the article
58 strSelectQuery = _
59 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
60 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
61 conMyConnection.Open()
62 cmdMyCommand.CommandText = strSelectQuery
63 dtrMyDataReader = cmdMyCommand.ExecuteReader()
64 dtrMyDataReader.Read()
65 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
66 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
67 Stars = Ratingvalues / Ratingnums
68 conMyConnection.Close()
69 'Response.Write("Values: " & Ratingvalues)
70 'Response.Write("Votes: " & Ratingnums)
71
72 UpdateRating(articleid, Stars, Ratingnums)
73 Else 'The user has rated the article before, so display a message...
74 Me.lblRating.Text = "You've already rated this article"
75 End If
76 strSelectQuery = _
77 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
78 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
79 conMyConnection.Open()
80 cmdMyCommand.CommandText = strSelectQuery
81 dtrMyDataReader = cmdMyCommand.ExecuteReader()
82 dtrMyDataReader.Read()
83 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
84 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
85 Stars = Ratingvalues / Ratingnums
86 If (Ratingnums = 1) And (Stars <= 1) Then
87 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
88 ElseIf (Ratingnums = 1) And (Stars > 1) Then
89 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
90 ElseIf (Ratingnums > 1) And (Stars <= 1) Then
91 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
92 ElseIf (Ratingnums > 1) And (Stars > 1) Then
93 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
94 End If
95
96 'Response.Write(String.Format("{0:f2}", Stars))
97 'Response.Write("Values: " & Ratingvalues)
98 'Response.Write("Votes: " & Ratingnums)
99 If (Stars > 0) And (Stars <= 0.5) Then
100 Me.Rating.ImageUrl ="./images/rating/05star.gif"
101 ElseIf (Stars > 0.5) And (Stars < 1.0) Then
102 Me.Rating.ImageUrl = "./images/rating/05star.gif"
103 ElseIf (Stars >= 1.0) And (Stars < 1.5) Then
104 Me.Rating.ImageUrl = "./images/rating/1star.gif"
105 ElseIf (Stars >= 1.5) And (Stars < 2.0) Then
106 Me.Rating.ImageUrl = "./images/rating/15star.gif"
107 ElseIf (Stars >= 2.0) And (Stars < 2.5) Then
108 Me.Rating.ImageUrl = "./images/rating/2star.gif"
109 ElseIf (Stars >= 2.5) And (Stars < 3.0) Then
110 Me.Rating.ImageUrl = "./images/rating/25star.gif"
111 ElseIf (Stars >= 3.0) And (Stars < 3.5) Then
112 Me.Rating.ImageUrl = "./images/rating/3star.gif"
113 ElseIf (Stars >= 3.5) And (Stars < 4.0) Then
114 Me.Rating.ImageUrl = "./images/rating/35star.gif"
115 ElseIf (Stars >= 4.0) And (Stars < 4.5) Then
116 Me.Rating.ImageUrl = "./images/rating/4star.gif"
117 ElseIf (Stars >= 4.5) And (Stars < 5.0) Then
118 Me.Rating.ImageUrl = "./images/rating/45star.gif"
119 ElseIf (Stars >= 4.5) And (Stars <= 5.0) Then
120 Me.Rating.ImageUrl = "./images/rating/5star.gif"
121 End If
122 dtrMyDataReader.Close()
123 conMyConnection.Close()
124 End Sub
If you want to reduplicate the error, click over here and try to submit a rating:
http://www.link-exchangers.com/view_full_article.aspx?aid=51
Thanks for helping me figure this out.
View 4 Replies
View Related
May 7, 2008
Untill recently I had a smooth running SSIS package,but suddenly it throws error syaing
"OnError,,,,,,,The result of the expression
"@[User:trTextFileImpDirectory] +"SomeTextStringHere"+ @[User:trANTTextFileName] +(DT_STR,30,1252) @[User:taging_Date_Key]+ "SomeTextStringHere"
" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property."
I have child SSIS package running under a parent package (through execute package task)
I have few flat file connection managers in child package for text file import , in which I am building text file path dynamically at run time by assigning an expression in connection string property of connection manager.
The Expression is as follows
"@[User:trTextFileImpDirectory] +"SomeTextStringHere."+ @[User:trANTTextFileName] +(DT_STR,30,1252) @[User:taging_Date_Key]+ +"SomeTextStringHere"
Where @[User:trTextFileImpDirectory] is a variable which contains path of directory containg text
files.Value in this variable is assigned at runtime from parent package's variable,which in turns fetch
value from a configuration file on local server.
With my current configuration this path has been configured to some other server's directory over network ( I.e my package picks text files from some other servers folder over network)
While
"Some string here"+ @[User:trANTTextFileName]" part of file name string.
(DT_STR,30,1252) @[User:taging_Date_Key] Contain the date of processing ,value in this variable is also picked up at run time from parent package variable.
1) So can someone give me some insight into possible reason of failures.
2) Is it possible that problem arises if directory (from which I m picking text files) is assigned password or is there exist some problem in accessing forlders over network ?
3) Or there can be some problem in package configuration at design time( I.e where I m assigning value in variable from parent package vriables)?
View 10 Replies
View Related
May 12, 2010
I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
View 5 Replies
View Related
Sep 11, 2015
I'm using Cube.My DimDate tables Datekey is integer .But client wants a calendar to set date as you see in picture .how can I change calendar value which will be input by user.
View 3 Replies
View Related
Aug 10, 2007
Hi,
I have 7 excel files that i have to import to sql server database and in that 6 of them work fine. But when i try to import the 7 one i get an
oledb exception saying that External table is not in the expected format.
So can i someone please help me with this error.
Regards
Karen
View 6 Replies
View Related
Apr 23, 2008
The ConnectionRetryTimeout property of the SQL Server 2005 Compact Edition Replication doesn't work as expected.
I had set the repl.ConnectionRetryTimeout = 10; in the code. But when i unplug the GPRS device from the PDA, the synchronization process doesn't timeout in 10 seconds, rather it takes about 1 minutes and 10 seconds to time out.
Please let me know, if any one come across with this kind of issue before!!!!
Thanks in advance,
Manu
View 3 Replies
View Related
Aug 20, 2007
Hi,I am trying to create an update statementon a table with a foreign key to the Userstable (userid).I am getting the error:An expression of non-boolean type specified in a context where acondition is expected, near ')'.Below is the Update statement.UPDATELastLogin SETdate= '2007-08-14 05:34:09.910',status= 1 ,activity = 0WHERE(SELECT ll.status, ll.activity, ll.dateFROM LastLogin ll, Users uWHERE ll.userid = u.useridAND u.email = 'dushkin@hotmail.com')Thanks!
View 2 Replies
View Related
Jul 18, 2007
[Microsoft follow-up]
Hello,
I think I've found a bug.
I have an expression set on the 'Disable' property of a data-flow task. When the expression evaluates to true the data-flow still executes. That seems wrong to me.
I ahve a demo package here: http://folders.live.com/self.aspx/VQ9oHa1TJjc/Public/SSIS%20Stuff/ExamplePackages/20070717%20Expression%20on%20Disable%20property%20has%20no%20effect/Package1.zip
Please reply letting me know whether this is indeed a bug or not.
I'm on SP1 by the way.
Regards
Jamie
View 9 Replies
View Related
Apr 10, 2015
I am getting an error when running this query in SSRS- "an expression of non-boolean type specified in a context where a condition is expected , near ',' " on the following query in the WHERE clause section.
SELECT
MG_BL_ITINERARY.ETA_DT,
MG_BL_ITINERARY.TO_LOCATION_CD
FROM MG_BL_ITINERARY
[code]...
what I need to change in the WHERE clause to rectify this error ?
View 3 Replies
View Related
Nov 20, 2007
Hi all,
Heres the setup...
We have an asp application that runs the reportserver URL for the selected report, passing it through parameters. This opens the report viewer and the report runs.
The problem im having is that one report is not working as expected. When the report is run from report manager, everything works fine. The links do what they're meant to (they link to other reports passing through parameters). When the report is run from our asp application with the report viewer, the links fail.... they dont pass through the correct values or sometimes dont pass through a value at all.
Were the report viewer and report manager applications developed seperately?
Any help would be appreciated.
Thanks.
View 5 Replies
View Related
Jun 14, 2006
I created a report with RS in VS.NEt and set the width and height to 8.5in by 11in from the property window. When I designed it , everything fit on one page nice and neat.
When printed it prints on two pages and the font size comes out much larger than expected. The whole document seems to have been blown up bigger and the right side of the document has been cut off. Why is this? Do I need to configure vs.net to print????
Am I missing some setting somewhere?
Other documents print out fine on this printer, so it is not the printer.
Any help would be greatly appreciated, thank you
this seems small but if I can't get the report to print out right then..........
View 5 Replies
View Related
Dec 14, 2007
I like to define my procedure parameter type to match a referenced table colum type,
similar to PL/SQL "table.column%type" notation.
That way, when the table column is changes, I would not have to change my stored proc.
Any suggestion?
View 1 Replies
View Related
Jan 15, 2008
Hello there!
I installed and configured SQL Server 2005 reporting services. When I try to connect to it using SQL Server Management Studio, I get the following error:
Client found response content type of "text/html", but expected "text/xml".
What should be done to overcome this?
Does anyone have any idea about this?
Thanks in advance
Hemant
View 10 Replies
View Related
May 6, 2008
Hi,
In my VB .Net application , when I am trying to fire a SSRS report on my local machine . Its giving the error ".Client found response content type of 'text/html', but expected 'text/xml'."
The request failed with the error message:
--
<html><head><title>Error</title></head><body>The Local Security Authority cannot be contacted
</body></html>
--.
the error is being thrown at the code line...
reportviewer.serverReport.getParameters()
I have reportserver as
https://ReportServerforApplication.abc.com/abc_ReportServer
I have admin rights on my machine but still the problem persists. Am i missing some user group?
Could someone Please help me with this.
Thanks In Advance
Gaurav
View 4 Replies
View Related
Aug 29, 2007
Hi,
I am getting these errors from Report Manager. It seems that every time after the server has been idling for about 15 minutes, I would get this error message. I can click on other links and I am able to continue to use Report Manager.
Is there a timeout setting to help me resolve this or is this a bug with Report Manager? I just insitalled SP2 on the SQL Server and the Reporting Service.
Error message on browser:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'. The request failed with the error message: -- <html> <head> <title> SQL Server Reporting Services </title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.3042.00" /> <meta name="HTTP Status" content="500" /> <meta name="ProductLocaleID" content="9" /> <meta name="CountryLocaleID" content="1033" /> <style> BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black} H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt} LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline} .ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray} A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none} A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline} A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none} A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline} </style> </head><body bgcolor="white"> <h1> Reporting Services Error<hr width="100%" size="1" color="silver" /> </h1><ul> <li>An internal error occurred on the report server. See the error log for more details. (rsInternalError) <a href="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsInternalError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.3042.00" target="_blank">Get Online Help</a></li><ul> <li>For more information about this error navigate to the report server on the local server machine, or enable remote errors</li> </ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span> </ul> </body> --.
Any ideas?
Thanks,
-waslam
View 1 Replies
View Related
Apr 21, 2008
Is it possible to include a text/string as suffix(append to the end of textbox) to an report parameter prompt string ? Something like this
Enter Date: [ Textbox ] format:mm/dd/yyyy
Enter Age:[Textbox ] e.g 50
I need to include text like the one that I have highlighted in blue. Could someone help me out?
View 7 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
Oct 23, 2007
Hi,I was wondering about the possiblity of setting a SelectParameter for my SQLDataSource declaritively, using a public property value.Something like this: <SelectParameters> <asp:Parameter Name="CategoryIdLvl3" DefaultValue='<% SelectedCatLvl3%>' Type="String" /> </SelectParameters> So the default value automically processes Public Property value of SelectdCatLvl3, which is declared in my code behind. Of course this syntax is incorrect, but if someone can help, much appreciated.I don't want to set this parameter in code behind, because I'd have to do it mulitple times, so was hoping this method would somehow work. thanks..
View 3 Replies
View Related
Jun 6, 2002
Hi group,
I don't know what I should try next, all of my tries have been without results in this case. I just wanted to create a temporary table, then insert one row into it and then use this row to compare if this row exists in another table or not. This is my script:
------------------------
CREATE PROCEDURE imp_Tippimport (@TGName char(33)) AS
BEGIN
CREATE TABLE #tTippgeber (
TGName2 char(33)
)
INSERT INTO #tTippgeber (TGName2)
VALUES (@TGName)
*** see below ***
IF NOT exists (select TGName FROM Tippgeber WHERE TGName = @TGName)
INSERT INTO Tippgeber SELECT TGName2 FROM #tTippgeber
/* SELECT * INTO Tippgeber FROM #tTippgeber */
ELSE
UPDATE Tippgeber SET
TGName = t.TGName2
FROM #tTippgeber AS t, Tippgeber
WHERE TGName = t.TGName2
END
GO
I also created a cursor and used a fetch in to a veriable in the line with the stars to see the value of TGName2 but it was NULL.
Any ideas ?!
Thanks for any help !!
Sascha
View 1 Replies
View Related
Mar 8, 2007
You can set the default value of a reporting services parameter by any expression.
But with code I'm NOT allowed to do:
Parameters!myParam.Value = CDate("01.01.2007")
This is cause Value property is read-only.
So the question would be:
Are there any way I set a parameter value in runtime ?
Hope anyone can help...
View 3 Replies
View Related
Oct 2, 2015
I am working with SQL Server 2012. I have deployed a SSIS project that has 2 packages in it. The package connection manager (Test) uses an expression to evaluate one of the Project parameter value (TestConnectionString) to set its ConnectionString property.
This works fine in a Dev environment. However when deployed to UAT, it keeps failing with the error:
PackageExport:Error: The result of the expression
"@[$Project::TestConnectionString]" on property
"Package.Connections[Test].Properties
[ConnectionString]" cannot be written to the property. The expression was evaluated, but cannot be set on the
property.
I can not seem to find what the issue could be. I have come across [URL] .... where it says: "If the package contains project parameters, the package execution may fail." but offers no solution.
View 4 Replies
View Related
Sep 20, 2007
I've got a big problem that I'm trying to figure out:I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.I don't need this for an individual ID select, I need it applied to every record from the table.My address table has some columns that look like:
[AddressID] [int][LocationID] [int][Type] [nvarchar](10)[Address] [varchar](50)[City] [varchar](50)[State] [char](2)[Zip] [varchar](5)[AddDate] [datetime][EditDate] [datetime]AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.How can I do this efficiently with perfomance in mind???Thank you in advance for any and all replies...
View 5 Replies
View Related
Sep 20, 2007
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like:
[AddressID] [int]
[LocationID] [int]
[Type] [nvarchar](10)
[Address] [varchar](50)
[City] [varchar](50)
[State] [char](2)
[Zip] [varchar](5)
[AddDate] [datetime]
[EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.
So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
Thank you in advance for any and all replies...
View 2 Replies
View Related
Oct 10, 2006
when i pass a input parameter, the SP doesn't recognize it.
like
exec SP 00004
it will print:
select * from table where idname = 4
i want it to print
select * from table where idname = '00004'
how can i do that?
View 11 Replies
View Related
Aug 20, 2001
Hi, I have no idea what i'm doing wrong: Tried to gather more detail information about Deadlock (error # 1205) set the trace flag 1204 - ON (tried 1205 - ON as well) nothing happend, still the same message outgoing "Your transaction (process ID #13) was deadlocked with...." with no any detail.
If anybody met the same problem before, HELP please.
Maybe the information goes to some place other than Error Log file?
Thanks,
Dima
View 2 Replies
View Related
Jun 19, 2008
I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
View 2 Replies
View Related
Feb 3, 2007
Hi all:
I have a list of items (actually a relation in which a user has selected an item, along with a rating for the item) in an Access database table, connected to my app with a SqlDataSource and bound to a repeater. The repeater displays the items to the user along with a dropdown box to show the rating, and allow the user to update it. The page connects and displays correctly.
My problem is that when the user submits the page and I iterate through the repeater items to update each rating, the updates are not being completed in the database. The update works if I hard-code a value for the rating into the query itself, but not when using an updateparameter (pTaskRating below). In other words if I replace pTaskRating with '5', all the correct records will be found and have their ratings updated to 5. That means that the mySurveyId and pTaskId(DefaultValue) parameters have to be working, because the right records are found, but I can't seem to update records based on the DefaultValue of the pTaskRating parameter, even though I can verify that the DefaultValue is correct by placing a watch on it. It seems that my problem must be in my use of that particular parameter in the query, either in properties of the parameter or in the value assigned to it. I am extremely frustrated - any ideas would be greatly, greatly appreciated. Thanks!
Bruck
The table I'm pulling from and updating looks like this:
SURVEY_ID (Text 50), TASK_ID (Long Int), RATING_ID (Long Int)
Here's my ASPX for the main data source:
<asp:SqlDataSource ID="sqlTaskSelections" runat="server" ConnectionString='Provider=Microsoft.Jet.OLEDB.4.0;Data Source="abc.mdb";Persist Security Info=True;Jet OLEDB:Database Password=xyz' ProviderName="System.Data.OleDb" SelectCommand="SELECT [SURVEY_ID], [TASK_ID], [RATING_ID] FROM [TBL_TASK_SELECTION] WHERE [SURVEY_ID] = mySurveyId" UpdateCommand="UPDATE [TBL_TASK_SELECTION] SET [RATING_ID] = pTaskRating WHERE ([SURVEY_ID] = mySurveyId) AND ([TASK_ID] = pTaskId)">
<UpdateParameters>
<asp:SessionParameter Name="mySurveyId" SessionField="SurveyId" DefaultValue="" /><asp:Parameter Name="pTaskId" DefaultValue="" /><asp:Parameter Name="pTaskRating" DefaultValue="" />
</UpdateParameters>
And here's the repeater (the Task ID and Rating are stored in hidden fields for easy access later):
<asp:Repeater ID="rptTaskSelections" runat="server">
<HeaderTemplate><table border="0"></HeaderTemplate>
<ItemTemplate>
<tr class="abctr"><td class="normal"><asp:DropDownList ID="cbRatings" runat="server"></asp:DropDownList><asp:HiddenField ID="hTaskId" Runat="server" Visible="false" Value='<%# Eval("TASK_ID") %>' /><asp:HiddenField ID="hRating" Runat="server" Visible="false" Value='<%# Eval("RATING_ID") %>' /> <%# Eval("TASK_ID") %></td></tr>
</ItemTemplate>
<FooterTemplate></td></tr></table></FooterTemplate>
</asp:Repeater>
And here's the page load and submit VB:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
'BIND / LOAD RATINGS TO DROPDOWN BOXES HEREDim i As IntegerDim cbCurrentRating As DropDownListDim hCurrentRating As HiddenFieldrptTaskSelections.DataSource = sqlTaskSelectionsrptTaskSelections.DataBind()
For i = 0 To rptTaskSelections.Items.Count - 1
cbCurrentRating = rptTaskSelections.Items(i).FindControl("cbRatings")hCurrentRating = rptTaskSelections.Items(i).FindControl("hRating")
cbCurrentRating.DataSource = sqlRatingscbCurrentRating.DataTextField = "RATING"cbCurrentRating.DataValueField = "ID"cbCurrentRating.DataBind()cbCurrentRating.SelectedValue = hCurrentRating.Value
Next
End If
End Sub
Protected Sub btnSubmitRateTasks_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmitRateTasks.Click
'UPDATE RATINGS HERE
Dim i As IntegerDim cbCurrentRating As DropDownListDim hCurrentTaskId As HiddenField
For i = 0 To rptTaskSelections.Items.Count - 1
cbCurrentRating = rptTaskSelections.Items(i).FindControl("cbRatings")hCurrentTaskId = rptTaskSelections.Items(i).FindControl("hTaskId")
sqlTaskSelections.UpdateParameters.Item("pTaskId").DefaultValue = hCurrentTaskId.ValuesqlTaskSelections.UpdateParameters.Item("pTaskRating").DefaultValue = cbCurrentRating.SelectedValue
sqlTaskSelections.Update()
Next
Response.Redirect("nextpage.aspx")
End Sub
View 3 Replies
View Related
May 9, 2006
I'm rather new at reporting services, so bear with me on this one.
I have a stored procedure in MSSQL called prc_failedSLA_per_week, that has two parameters (@startWeek and @endWeek). I've added a dataset in reporting services which runs my procedure. when I run it from the data tab in RS, I get prompted for values on these two parameters, and a table gets generated. But if I try to preview my report, I get the error "Procedure of function "prc_failedSLA_per_week" expects parameter "@startWeek", which was not supplied".
I've tried to find info on this in the help file to no avail, not even google helps me in any way. I guess it's some kind of newbie mistake, but I simply can't figure out what to do.
Any help would be greatly appreciated!
View 3 Replies
View Related
May 21, 2007
Hi All,
I'm unable to pass a report a parameter via a URL and thoughts on what I'm messing up?
Browser is IE7
The following is my url... Report name is Report3 and the Parameter name is WONumber
http://report/Reports/Pages/Report.aspx?ItemPath=%2fOutage+Reporting%2fDevelopment%2fReport3&WONumber=264698
View 5 Replies
View Related
