Urgent....Transaction Log Backup
Feb 7, 2000Hi,
What do I do if transaction log is full ?????
Can I automate the truncation of the transaction log????
Bindu
Hi,
What do I do if transaction log is full ?????
Can I automate the truncation of the transaction log????
Bindu
Hi Guys,
We have a database with 20 gig and with huge transactions. The transaction log backup is scheduled every one hour
from 3.00 AM to 9.00 PM.
We take a full backup in the disk at 9.00 PM and again a full backup in the tape at 2.00 AM
It works fine in the day from 6.00 AM and complete within seconds and the size is approx. 50 to 200 MB.
But the very first transaction log backup at 3.00 AM is running like 3 hrs and the size is approx. 11 gig whick is almost equivalent to the Full backup size. There are some dts packages that are running in the night and as usual reindex, intergrity checks are running and there no large user traffic during night. But I have no idea which the very first transaction log backup in the morning takes longer time and has this bug size. Is there any work around to fix this proble.
Please advise.
Thanks,
Anu
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedHow do we know the list of all the backups that are present in a particualr backup device like file# and time of backup taken etc for the purose of restore?
When I run :
RESTORE HEADERONLY FROM BackupDeviceName
it doesn't give that info. Can anyone tell me the exact command to list all the files of a backup device so that I can restore the right one??
Thanks.
Shalini.
Hello, everyone:
I just heard that for restore purpose, ths full backup and transaction log backup should be from one maintenance plan. Otherwise transaction log backup files cannot be restored after restoring full backup files.
Is it true? Can anyone offer official documents?
In my system, full and transaction backups are from one maintenance plan. Restores are doing fine. I am not sure that ideal is true or not.
Thanks
ZYT
what is the differences between a differenctial backup and transaction log backup?
View 1 Replies View RelatedI neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
Hi! i need to clean the transaction log of a local database. I used to do this in SQL server 6.5 with the sentence 'dump transaction {DB} with no_log'. After this ran 'sp_spaceused @updateusage = 'true'' and the problem was corrected. How can i do this in version 7' ? Are the same sentences?
View 1 Replies View RelatedFor some reason the transaction log backup which occurs every few hours has failed. This means my transaction log in filling up. Is it possible to increase the space allocated for the log whilst the server is in use.
Thanks in advance for help.
Hi,
what do I do if the trasaction log is full?????
Bindu
Hi All,
I have been asked to take over the maintenance on dB servers that I have not originally 'set up'. The request came as a result of the database log files growing at such a rapid pace its taking up hard drive space. I ran sp_dboption and noticed that the log files are NOT set up to truncate on checkpoint. As in SQL 2000 I wanted to determine if the dB was set up in 'simple' or 'full' recovery mode. It appears they are set up in 'full' recovery mode (which we can modify, since this is not a transactional dB and we rarely if ever have to restore from the transaction log). Hence my question,
Is there anything I need to worry about (regarding replication)if I change the dboption to truncate on checkpoint and set dB in simple recovery mode?
And after I backup the transaction log and try to shrink it will that have any adverse affects? I feel like this is all I need to do but replication is new ground for me, any information regarding it would be greatly appreciated. Also, any advice on how to maintain the transaction logs would be helpful.
Christine
Hi,
I would like to capture number of the total transactions made on the server during a day. ie begin tran - commit tran
How can I collect this information?
Is it possible?
Please help.
Hi,
I have just migrated the 6.5 SQL Server to 7 and the intial isze of Db growth was unlimited for 7.0 and so was the transaction log
, now the problem is that the trasaction log file has grown to 8GB, i truncated the transaction log and took a complete DB
backup now the log size is 90MB but i was to put restrictions on log growth to max of 1500MB but when i go to properties of Db
and try to change the log size to 1500 it says cannot change it as the size is less than max size, the max size it shows currently is 8GB
i was to re set it to 1.5GB how can i do that i have tried shrinking the file and relasing the space to OS but still the size it show to me
is 8GB.
What shold i do...
Replies will be appreciated
jane
Hi,
Every one
I have added new column in my Publication - Article Table ,
Same column I have added in my Subscriber Table ,
I am doing Transaction replication , but now its giving me error
Insert Error - Column Name or Supplied Value doesn't Match,
If any one has any idea please suggest me
Thanks
Nirmal
Hi,
I have an urgent problem.
My transaction log is full.What can I do?I can't stop the server.It's on production.
Please suggest.It's urgent.
TIA
please I need to know what is required to properly execute a dts with steps joined to transactions in it.
i know MSDTC must be running on server but it must be running in local machine too?
user running dts must be sysadmin? is it required ?
any other requirements needed?
please write down a full list of required items or a BOL reference to look for
Hi friends ,
I have a database with around 2 GB space for the data and 5.8 GB for the
transaction log .
Now the problem is i do not have any more space on the system and data files requires more space than 2 G.B to execute some stored procedures .
Is it possible to decrease some space of the transaction log , say from 5.8 GB to 2 GB and allocate it to the data files .
My data and log files are on different drives . I did not find anything related to this topic in the BOL .
Can somebody help me with this problem ? Anthing related to this issue will be of great help to me since i have no expertise in this field .
Thanks and Regards
Christine S.
i have two remote servers connected to each other through the linked servers.
i can run querries or even perform inserts as far as its not inside a transaction
but when i am trying to run distribted transaction but it keeps on returning the same msg.
Server: Msg 7391, Level 16, State 1, Line 3
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
i have configured the firewall, made sure the DTC service is started on both and enabled. they both have the same Sp packs, same config.
Hi,
We have an order posting stored procedure that's been executing for 14 hours now. This procedure has simple update statements but all the tables updated have triggers which update other tables with triggers and so on.
This procedure hasn't commited yet. I have a full database backup from last night and transaction log backup from this morning while it was running. I want to kill this job and restore database from last backup. Only thing I am afraid of is that it will take too long to roll back which I have no estimate of time. Is there any faster way to get rid of all the uncommited transactions? Has anybody rolled back such a massive transaction? Any idea on how long it can take? Can it affect the overall server performance as this is the main production ERP server.
I can see in profiler that this procedure is still running and not hung.
Hello,
View 25 Replies View RelatedIntially my backup was working fine since couple of days it started failing, when i checked the backup through maintainance plan i saw that it does'nt recognize the mapped drive it says invalid drive.
Basically i want to take backup of the on database A from Server A to Server B which i mapped. G:oppxyz00t142linktest.
Both Sql server and Agent use the system account => kavitha is the user account through which i login hence i think this is the system user name, i have been give full access to the mapped drive.
I appreciate your help.
Kavitha
When i tried to take a backup on a remote server i got this error.Not only this master all the user tables and other system databases also failed,the also give the same error.
Database master: Database Backup...
Destination: [dgssmf01q001ackupmastermaster_db_200108220401.BA K]
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3202: [Microsoft][ODBC SQL Server Driver][SQL Server]Write on 'dgssmf01q001ackupmastermaster_db_200108220401.B AK' failed, status = 5. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Backup or restore operation terminating abnormally.
could any one tell me what might have caused it and how do i go about to solve this.
Thanks for your precious help.
Kavitha
Hi,
Schedule backup job which usually completes in 1 to 2 minutes, it's been running for over three hours. Meanwhile transact log backup job executed and it's hanging also.
I stopped the jobs, which now shows last run status 'cancelled'. But the spid still exeists in 'current activity' pane with status 'runnable'.
No locks or blocks!
Is there anyway I can get rid of this spids so that I can start backup job again?
It's very urgent..
THanks
My database backup which was scheduled to run every day at 2A.M is still running, I issued kill command for the process at 10.45A.M , rollback process is still running for the last two hours. Can anyone help me out how to solve this problem.
Thankx
VS
Can I backup a db which is on server1 by sitting at server2 by way of running a script on server2.
Thanks.
My overnight backups hang occasionally. I say this because there is no consistancy to when the routine will hang. It happens on the first step where it reindexes. The only user database on the server is about 12GB. The server is dedicated to SQL so nothing else runs on it. It has 2x 800 MHz processors with 2 G of ram of which 1.5 is allocated to SQL.
I can't trace the error because it happens before the report is written to. There are a few tables with a million plus records that take up almost a 1G per table.
It was my understanding that if users were in the database they would notice a big performance loss but that the backups would still run. Could it dying because of resource contention? I'm at a loss and really could use some input. I can't afford to go a whole weekend without a backup.
Is there a way for me to progammatically check who is the database prior to the job kicking off?
Any ideas as to what would cause an inconsistant hang of job is greatly appreicated.
Thanks,
Kelsey
By mistake i restored a database to different one.
It actullay overwrote it.
Is it possible to roll it back to the state before i restored.
I need your answer as soon as possible
I have got a recent backup problem that just does not make sense. The system is able to perform hourly backups of my transaction logs fine but my daily backups of the entire database which occurs every night now fails. I tried recreating my daily backup job all over again from scratch and the job still fails.
When I perform a manual backup of the database however the system works fine.
Hi All,
Sql server 7.0
i have a db ABC and want to restore it as ABCbak, I am taking the backup of the db ABC and restoring it on ABCbak, i am also seeing that the physical names are different but logical names remains the same. Will this cause any kind of problem to db ABC.
Waiting for reply.
TIA
Adil
I have installed Beta 2 over SQL Express and when i wanted to install either Beta 2 or Express it dosn't allow e and i need to backup my databases urgently?
how can i do that?
is it possibe to do it with the phisyical files?
Hi
I have a full backup and transaction log backup strategy for my test server.
My transaction log backup is failing as some user must have run some nonlogged operation. Is there any way to find out what is causing transaction log backup to fail?
Any hint would be appreciated.
I have a problem w/ my Transaction Log Backup. The backup files continues to grow and grow and grow. I have created a new Transaction Log backup through EM, but instead of appending each backup to the existing backup file, I overwrite the existing backup file. My gut feeling is that this is not right. If it isn't, then how can I continue to backup my TL's w/o having the file growing at an astronomical pace?
I would appreciate your help
Chris
Is there a possibility to recover a database up to the point of failure ?
I have a database with a primary datafile and a transaction logfile.
I have backup of the database and transaction log backups upto an hour before failure. But I also want to recover one hour data which is in the transaction log.
I have lost my primary datafile.
Is there a way to recover ?
How do I backup the transaction log before starting restore ?
Thanks,
Bala