Hi, everyone. I was using ODBC everywhere in my code and now I'm considering using ADO in a new project. However, I don't want to throw all the old ODBC code away. Is that possible that I can use some wrapper to use ADO underneath while having a ODBC interface?
Thanks!
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
For inserting current date and time into the database, is it more efficient and performant and faster to do getDate() inside SQL Server and insert the value
OR
to do System.DateTime.Now in the application and then insert it in the table?
I figure even small differences would be magnified if there is moderate traffic, so every little bit helps.
Thanks.
I'm trying to execute a stored procedure within the case clause of select statement.
The stored procedure returns a table, and is pretty big and complex, and I don't particularly want to copy the whole thing over to work here. I'm looking for something more elegant.
@val1 and @val2 are passed in
CREATE TABLE #TEMP(
tempid INT IDENTITY (1,1) NOT NULL,
myint INT NOT NULL,
mybool BIT NOT NULL
)
INSERT INTO #TEMP (myint, mybool)
SELECT my_int_from_tbl,
CASE WHEN @val1 IN (SELECT val1 FROM (EXEC dbo.my_stored_procedure my_int_from_tbl, my_param)) THEN 1 ELSE 0
FROM dbo.tbl
WHERE tbl.val2 = @val2
SELECT COUNT(*) FROM #TEMP WHERE mybool = 1
If I have to, I can do a while loop and populate another temp table for every "my_int_from_tbl," but I don't really know the syntax for that.
Any suggestions?
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
View 2 Replies View RelatedHi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
I have a statement which might need a while inside of a while. The
start date - end date creates one record for a record insert. I have that working. But along with producing a record for every day there might be an
instance where something is dispersed 3 times a day for five days. I then need to create 3 records for every day for 15 records. This only happens on records if the daily dispersal is greater than 1. The code below works fine, but should I add a second while inside of the existing one for the @freq and increment it by one. Would an If or case inside of the while be better?
Thanks
set @freq = freq in table
set @nodays = datediff(day, @sdate - 1, @edate)
select @nodays
while @cnter < @nodays and
begin
--insert values
insert into PATIENT_MEDICATION_dispersal2_
values (@account_id,@caseid, @entcid, @ndcid, @sdate)
Set @cnter = @cnter + 1
set @sdate = @sdate + 1
end
Hi all
As following I show my sql server query.Please just look at the blue code.How can I add a statement to do not read the code if value received is null, i.e., do not add INNER JOIN stm.Thanks a lot
string strCmd = "SELECT "; strCmd += " Codigo_cotacao as 'Cód. Proposta', "; strCmd += " Cod_empresa as 'Cód. Cliente', "; strCmd += " Nome_empresa as 'Nome Cliente', "; strCmd += " Negocios_atividades_propostas.Id_atividade_proposta as 'Cód. Atividade', "; strCmd += " Nome_atividade_proposta as 'Atividade', "; // add something here if Ramo_cotacao is null and not read the next line strCmd += " Negocios_ramos.Cod_ramo as 'Cód. Ramo', "; strCmd += " convert(varchar,Data_cotacao,103) as 'Data Proposta', "; strCmd += " convert(varchar,Vigencia_cotacao_inic,103) as 'InÃc. Vigência', "; strCmd += " convert(varchar,Vigencia_cotacao_fim,103) as 'Térm. Vigência', "; strCmd += " Nome_status as 'Status', "; strCmd += " NVIdas_cotacao as 'Núm. de Vidas', "; strCmd += " Premio_cotacao as 'Prêmio Estimado', "; strCmd += " Nome_canal as 'Canal', "; strCmd += " Nome_corretor as 'Corretor', "; strCmd += " Nome_pac as 'PAC', "; strCmd += " Negocios_gerentes_canais.Nome_gerente as 'Gerente Canal', "; strCmd += " Negocios_gerente_beneficios.Nome_gerente as 'Gerente BenefÃcios', "; strCmd += " Nome_filial as 'Filial', "; strCmd += " Nome_regiao as 'Região', "; strCmd += " Nome_consultor as 'Consultor' "; strCmd += " FROM Negocios_cotacoes "; strCmd += " INNER JOIN Negocios_empresas ON Cod_empresa = Empresa_cotacao "; strCmd += " INNER JOIN Negocios_atividades_propostas ON AtivProp_cotacao = Negocios_atividades_propostas.Id_atividade_proposta "; // add something here if Ramo_cotacao is null and not read the next line strCmd += " INNER JOIN Negocios_ramos ON Negocios_ramos.Cod_ramo = Ramo_cotacao "; strCmd += " INNER JOIN Negocios_status ON Id_status = Status_cotacao "; strCmd += " INNER JOIN Negocios_canais ON Cod_canal = Canal_cotacao "; strCmd += " INNER JOIN Negocios_corretores ON Cod_corretor = Corretor_cotacao "; strCmd += " INNER JOIN Negocios_pacs ON Cod_pac = Pac_cotacao "; strCmd += " INNER JOIN Negocios_gerentes_canais ON Negocios_gerentes_canais.Cod_gerente = GerenteCanal_cotacao "; strCmd += " INNER JOIN Negocios_gerente_beneficios ON Negocios_gerente_beneficios.Cod_gerente = GerenteBeneficios_cotacao "; strCmd += " INNER JOIN Negocios_filiais ON Negocios_filiais.Cod_filial = Filial_cotacao "; strCmd += " INNER JOIN Negocios_regioes ON Cod_regiao = Regiao_cotacao "; strCmd += " INNER JOIN Negocios_consultores ON Cod_consultor = Consultor_cotacao "; strCmd += " INNER JOIN Negocios_produtos ON Produto_cotacao = Id_produto "; strCmd += " WHERE Codigo_cotacao <> -1 "; if (hiddenddlEmpresa.Text != "Todas") strCmd += " AND Negocios_empresas.Cod_empresa = " + hiddenddlEmpresa.Text; if (hiddenddlCategoria.Text != "Todas") strCmd += " AND Negocios_categorias.Id_categoria = " + hiddenddlCategoria.Text; if (hiddenddlProduto.Text != "Todos") strCmd += " AND Negocios_produtos.Id_produto = " + hiddenddlProduto.Text; if (hiddenddlRamo.Text != "Todos") strCmd += " AND Negocios_ramos.Cod_ramo = " + hiddenddlRamo.Text; if (hiddenddlCorretor.Text != "Todos") strCmd += " AND Negocios_corretores.Cod_corretor = " + hiddenddlCorretor.Text; if (hiddenddlConsultor.Text != "Todos") strCmd += " AND Negocios_consultores.Cod_consultor = " + hiddenddlConsultor.Text; if (hiddenddlCanal.Text != "Todos") strCmd += " AND Negocios_canais.Cod_canal = " + hiddenddlCanal.Text; if (hiddenddlStatus.Text != "Todos") strCmd += " AND Negocios_status.Id_status = " + hiddenddlStatus.Text; if (hiddenddlRegiao.Text != "Todas") strCmd += " AND Negocios_regioes.Cod_regiao = " + hiddenddlRegiao.Text; if (hiddenddlGerenteCanal.Text != "Todos") strCmd += " AND Negocios_gerentes_canais.Cod_gerente = " + hiddenddlGerenteCanal.Text; if (hiddenddlFilial.Text != "Todas") strCmd += " AND Negocios_filiais.Nome_filial = '" + hiddenddlFilial.Text + "'"; if (hiddenddlAtividadeProposta.Text != "Todas") strCmd += " AND Negocios_atividades_propostas.Id_atividade_proposta = " + hiddenddlAtividadeProposta.Text; if (hiddenddlPAC.Text != "Todos") strCmd += " AND Negocios_pacs.Cod_pac = " + hiddenddlPAC.Text; if (hiddenddlGerenteBenef.Text != "Todos") strCmd += " AND Negocios_gerente_beneficios.Cod_gerente = " + hiddenddlGerenteBenef.Text; if (hiddentxtDataPropostaInic.Text != "" && hiddentxtDataPropostaFim.Text != "") strCmd += " AND Data_cotacao BETWEEN '" + hiddentxtDataPropostaInic.Text + "' AND '" + hiddentxtDataPropostaFim.Text + "'"; if (hiddentxtInicioVigenciaInic.Text != "") strCmd += " AND Vigencia_cotacao_inic BETWEEN '" + hiddentxtInicioVigenciaInic.Text + "' AND '" + hiddentxtInicioVigenciaFim.Text + "'"; if (hiddentxtDataPropostaFim.Text != "") strCmd += " AND Vigencia_cotacao_fim BETWEEN '" + hiddentxtFinalVigenciaInic.Text + "' AND '" + hiddentxtFinalVigenciaFim.Text + "'";
Is it possible to use IF inside a query, in the WHERE statement? I started with the query right below, but I onlye got error. After testing and rewriting a lot I ended up with the last query. But there hast to be a better, smarter, more elegant way to write this query? Any hint? ALTER PROCEDURE [dbo].[LinksInCategory]-- =============================================-- Description: Return all links from the requested category.-- ============================================= (@CategoryId int, @AdminFilter bit)AS SELECT Link.Id, Link.Title, Link.Url, Link.ShortText, Link.Hidden FROM Link WHERE Link.Parent = @CategoryId IF (@AdminFilter = 1) print 'AND Link.Hidden = @AdminFilter' ORDER BY Link.Title ALTER PROCEDURE [dbo].[LinksInCategory]-- =============================================-- Description: Return all NOT hidden links from the requested category.-- If in Administrators role the return ALL links (the hidden ones also).-- ============================================= (@CategoryId int, @AdminFilter bit)AS IF (@AdminFilter = 1) BEGIN SELECT Link.Id, Link.Title, Link.Url, Link.ShortText, Link.Hidden FROM Link WHERE Link.Parent = @CategoryId ORDER BY Link.Title END ELSE BEGIN SELECT Link.Id, Link.Title, Link.Url, Link.ShortText, Link.Hidden FROM Link WHERE Link.Parent = @CategoryId AND Link.Hidden = @AdminFilter ORDER BY Link.Title END Regards, Sigurd
View 4 Replies View RelatedI have a sql statement that has several OR statements in it which work fine. It looks like bottom below.
What I need to know is can you put a IF statement in a where clause like this. Such as
WHERE convert(datetime, patient_.df_admit_date, 101) > = @tdate or
if patient_.dru = "yes" convert(datetime, patinet_.df_admit_date, 101) > = @tdate - 8 or
WORKIN STATEMENT
select
PATIENT.ACCOUNT_ID,patient_.DF_PPD_POS_NEG, PATIENT.LAST_NAME, PATIENT.FIRST_NAME, PATIENT.MIDDLE_INIT, PATIENT.OTHER_ID_NUMBER,
PATIENT_.DF_ADMIT_DATE, PATIENT_.DF_PPD, PATIENT_.DF_PPD_POS_NEG, PATIENT_.DF_PPDB_DATE,
PATIENT_.DF_XRAY_DATE, PATIENT_.df_ppd_read, FROM
{ oj development.dbo.PATIENT PATIENT INNER JOIN development.dbo.PATIENT_ PATIENT_ ON
PATIENT.COMPANY_ID = PATIENT_.COMPANY_ID AND
PATIENT.DEPARTMENT_ID = PATIENT_.DEPARTMENT_ID AND
PATIENT.ACCOUNT_ID = PATIENT_.ACCOUNT_ID}
where
convert(datetime, patient_.df_admit_date, 101) > = @tdate or
convert(datetime,patient_.df_ppd, 101) >= @tdate - 2 or continued!!!
I am trying to do the following:
select * from table1
where createddate = '7/25/06'
and id = @temp
where @temp is char(1). The problem is @temp may be null or blank.
I didn't want to check @temp and then run the select statement.
How to check if @temp is not null or not empty inside WHERE clause and then run the select statement if @temp not empty?
Thanks for any help.
hai guys
how should we have to cal the store procedure inside the same store procedure.
for Example
Create procedure A
as
Begin
Select * from mytable
execute A
end.
is this the correct one
Hi:
I want to open a new session/connection inside the execution of a stored procedure. Is this possible ?
I ask this because I need a new sesssion with its own transaction.
Thanks,
Rui Ferreira
Hi :
Can anyone tell me if it is possible to get information like : servername/databasename inside an extended stored procedure ?
I checked the "srv_pfield" function but it only returns user/password information.
Thanks,
Rui
hello,
anyone for help?
what's the syntax of for.next, do while loop in Stored Proc?
ur help is much appreciated!
thanks,
Is there possibility to use IF conditions inside SELECT statements?For example, can i write something like this:CREATE PROCEDURE [search](@OPTION int,@KEYWORD nvarchar(40))ASBEGINSELECT id FROM projects WHERE title LIKE @KEYWORD IF (@OPTION = 1)THEN (OR description LIKE @KEYWORD)ENDor am i limited to this:....BEGINIF @OPTION = 1SELECT id FROM projects WHERE title LIKE @KEYWORD OR description LIKE@KEYWORDELSESELECT id FROM projects WHERE title LIKE @KEYWORDEND
View 3 Replies View RelatedHi ,
I have created in my sqlserver 2005 database a stored procedure with the following code.
///////////////////////////////////////////////////////////////
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[d_sty_print_menu_per_role_per_app2]
@menu_name VARCHAR(255) = NULL ,
@is_user VARCHAR(255) = NULL ,
@is_appl VARCHAR(255) = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
;WITH GetHierarchy (item_text ,orden , read_order, item_parent , menu_item , enabled)
AS
(--Anchor.
select tb1.item_text, tb1.orden, tb1.read_order, tb1.item_parent , tb1.menu_item ,
(SELECT 'N' FROM PROFILE_PERMISSION PP
INNER JOIN sys_menu_item ON PP.MENU_ITEM=sys_menu_item.menu_item
WHERE PP.PROFILE_INDEX in (select up.profile_index from user_profile up where up.user_id= @is_user) and
not exists (select up.profile_index from user_profile up where up.user_id= @is_user and up.profile_index=1) and
PP.APPLICATION_CODE = @is_appl AND
PP.MENU_NAME=@menu_name --and
--PP.MENU_ITEM=tb1.menu_item
) as enabled
From sys_menu_item as tb1
where tb1.MENU_ITEM not in ('m_window','m_help','m_toolbar') and tb1.item_parent not in ('m_toolbar','m_window','m_help')
And tb1.item_parent= @menu_name
--Members
UNION ALL
select tb2.item_text, tb2.orden, tb2.read_order, tb2.item_parent , tb2.menu_item ,
(SELECT 'N' FROM PROFILE_PERMISSION PP
INNER JOIN sys_menu_item ON PP.MENU_ITEM=sys_menu_item.menu_item
WHERE PP.PROFILE_INDEX in (select up.profile_index from user_profile up where up.user_id= @is_user) and
not exists (select up.profile_index from user_profile up where up.user_id= @is_user and up.profile_index=1) and
PP.APPLICATION_CODE = @is_appl AND
PP.MENU_NAME=@menu_name -- and
-- PP.MENU_ITEM=tb1.menu_item
) as enabled
from sys_menu_item as tb2 , GetHierarchy
where tb2.MENU_ITEM not in ('m_window','m_help','m_toolbar') and tb2.item_parent not in ('m_toolbar','m_window','m_help')
And tb2.item_parent = GetHierarchy.menu_item and tb2.menu_name = @menu_name
)
select Space(5*(orden)) + item_text as menui, orden, read_order, item_parent , menu_item ,enabled
From GetHierarchy
END
///////////////////////////////////////////////////////////////
So far so good.
The problem is in a specific part of the sql statement (which is also part of my business logic).
the following statement has a little problem.
(SELECT 'N' FROM PROFILE_PERMISSION PP
INNER JOIN sys_menu_item ON PP.MENU_ITEM=sys_menu_item.menu_item
WHERE PP.PROFILE_INDEX in (select up.profile_index from user_profile up where up.user_id= @is_user) and
not exists (select up.profile_index from user_profile up where up.user_id= @is_user and up.profile_index=1) and
PP.APPLICATION_CODE = @is_appl AND
PP.MENU_NAME=@menu_name --and
--PP.MENU_ITEM=tb1.menu_item
) as enabled
When I'm executing, it tells me that the Subquerry is returning more than one rows. I have tried to use TOP 1 but Sqlserver 2005 doesn't allow you to do that because you are inside a recursion.
I have tried to do this
(SELECT TOP 1 'N' FROM PROFILE_PERMISSION PP
INNER JOIN sys_menu_item ON PP.MENU_ITEM=sys_menu_item.menu_item
WHERE PP.PROFILE_INDEX in (select up.profile_index from user_profile up where up.user_id= @is_user) and
not exists (select up.profile_index from user_profile up where up.user_id= @is_user and up.profile_index=1) and
PP.APPLICATION_CODE = @is_appl AND
PP.MENU_NAME=@menu_name --and
--PP.MENU_ITEM=tb1.menu_item
) as enabled
But the system prevents me from doing that.
Any ideas ? How can I return only one row (I don't care which one) ?
Can I put this Sql statement in a function and then call it inside this recursion ? Is it permitted ?
I would mostly appreciated any help you can give me.
Thank you
zkar
Hi,
I have a quick question for you all...
If I use an OR statement inside the WHERE clause of a SELECT, should SQL Server evaluate both side of the OR or just the left hand side if it returns TRUE?
The reason I'm asking is that I have an SP the accepts a string parameter, this param is a search condition, say a name. The param is a nvarchar and can be null. In my SP I do this:
SELECT * FROM Customer
WHERE CustomerDeleted = 0
AND (
@searchText IS NULL OR CustomerID IN (SELECT ID FROM fn_GetSearchResults(@searchText))
)
The idea is that if the @searchText param is NULL then all Customers are return, otherwise the @searchText is used in a function to determine which customers match the criteria.
This only works if SQL stops evaluating the OR condition as soon as it comes accross a TRUE statement.
Thanks for any help
Graham
Hi,
I am wondering if it is possible ( I think I read it somewhere) to access the infomation inside CONTEXT_INFO inside CLR Code.
I am calling SET CONTEXT_INFO in my SQL Proc and I need to read the values back out inside a C# function.
Is this possible?
Thanks
Dave
Hello, inside of my SP i want to execute another SP, something like:
EXEC [dbo].[Forum_DeleteBoard] @BoardID = @DelBoardID
this function Forum_DeleteBoard returs one row with 3 columns as a table, how do i get the first column of that table into a variable so i can check if it was ok or not(it returns just one row with 3 columns).
Columns it returns:QResult , Threads , Answers
SELECT @isok = QResult FROM EXEC [dbo].[Forum_DeleteBoard] @BoardID = @DelBoardID ?
or how do you get it?
Patrick
i ve got a database that has a table...that table has a relationship between its primary key,and another field,actuelly i did it for doing menus and sub menus,so each menu has an ID say menuID and it has DEPTH and parentID which is the menuID of the parent...the problem is that i can not use "Cascade update Related Fields" or "Cascade Delete Related Records" which are really necessary ...for example when deleting parent ,not to have a child lost :)i hope i ll have an answer soon,and thanks in advancedPS: i am using MSSQL 2000 evaluation
View 4 Replies View RelatedI am using the createuserwizard, and have set up my own profile table which hold first name, last etc. In my CreateUserWizard, the field for Vendor is a dropdownlist that is to be populated from a list in a database. I set up the form without the createuserwizard, and everything went skippy, but when I placed it into the wizard, I now cannot access the control of the dropdownlist.
I have tried doing..
Using SqlConnection As New SqlConnection(WebConfigurationManager.ConnectionStrings("Personal").ConnectionString)Dim VendorID As DropDownListVendorID = CType(CreateUserWizard1.FindControl("VendorName"), DropDownList)
Dim MyReader As SqlDataReaderDim sel As String = String.Format("SELECT VendorID, Name FROM Vendors")Dim MyCommand As SqlCommandMyCommand = New SqlCommandMyCommand.CommandText = selMyCommand.CommandType = CommandType.TextMyCommand.Connection = SqlConnectionMyCommand.Connection.Open()MyReader = MyCommand.ExecuteReader(CommandBehavior.CloseConnection)But when I go to databind, it says:Object reference not set to an instance of an object. VendorID.DataSource = MyReaderLine 30: VendorID.DataValueField = "VendorID"Line 31: VendorID.DataTextField = "Name"
I have a loop(while) statement I need to run inside a cursor statement. The loop creates records based on a frequency. The cursor and the loop work but the problem is that the cursor only reads the first record, runs the loop, but then ends. I am pasting the code below. Any help appreciated
declare dbcursor cursor for select uniq_id,account_id,created_by,encounter_id, start_date,date_stopped,sig_codes, ndc_id,modified_by from patient_medication where convert(datetime,start_date) = '10/20/2000' and date_stopped is not null
open dbcursor fetch next from dbcursor into @uniqid,@account_id,@createid,@entcid, @sdate, @edate ,@sig_code, @ndcid, @modid
while (@@FETCH_STATUS <> -1)
begin
select @freq = SIG.sig_frequency FROM SIG where SIG.SIG_KEY = @sig_code
set @hfreq = @freq if @freq = 9 set @freq = 1 set @nodays = datediff(day, @sdate - 1, @edate)
while @cnter < @nodays
begin
while @fcnter < @freq + 1 begin insert into PATIENT_MEDICATION_DISPERSAL_ (uniq_id,account_id, occurance_id, encounter_id, ndc_id, ddate, frequency, sig_code,disp_create_id, disp_mod_id) values (@uniqid,@account_id,@fcnter, @entcid, @ndcid, @sdate, @freq, @sig_code,@createid, @modid )
set @fcnter = @fcnter + 1
set @erdate = @sdate
END
if @hfreq = 9
begin set @fcnter = 1
set @sdate = @sdate + 2
Set @cnter = @cnter + 2
end
else
begin
set @fcnter = 1
set @sdate = @sdate + 1
Set @cnter = @cnter + 1
end
end
end
close dbcursor
deallocate dbcursor
begin
if @counter=2
update t_import_main set program2=@prog, g2=@gno,yr2=@yr, Program_code2=@pcode where uno=@oldu
case
when @pcode is null then
Program_code2=@gno
End
I get this error message
Incorrect syntax near the keyword 'case'.
What am i doing wrong??
Good day!
Just wanted to ask how can I execute a DTS package from inside a scheduled job.
I have 3 DTS Package, so instead of scheduling the 3 package separately...I created a job to execute the 3 packages in a single scheduled time.
My syntax inside the command window is:
EXEC DTSPackageName
But its not working.
Any help is greatly appreciated.
Thanks.
I have a strange problem, I want to execute different stored procedures based on certain criteria defined in the database. I am able to execute the sp using the sp_executesql system stored procedure.
Exec sp_executesql N’exec procedurename {parameterlist}’, N’{parameter declaration}’, Parametervalues
Now I want to read a particular value that is being return be the procedure.
NOTE: procedure is returning a resultset.
Please help me.
Thanks!
Hello,
is it possible to build a loop for the following statement?
CREATE VIEW vwObjects as (
Select 2001 as year, 1 as quarter, id as id
from dbo.objects o
where o.edate >= '20010101' and o.sdate < '20010401'
union
Select 2001 as year, 2 as quarter, id as id
from dbo.objects o
where o.edate >= '20010301' and o.sdate < '20010701'
...
union
Select 2002 as year, 1 as quarter, id as id
from dbo.objects o
where o.edate > '20020101' and o.sdate < '20020401'
...
)
I want a kind of calender for my olap cube, so I can get every active object in a special quarter resp year.
Thank you!
I have this SPROC that is executed by a SSIS every hour. Basically, between 1AM-6AM, I don't want the SPROC to execute what ever is inside. it still keeps running whatever is inside the IF statement.
TRUNCATE TABLE DataSubscription
DECLARE @StartTime AS VARCHAR(100)
DECLARE @EndTime AS VARCHAR(100)
SET @StartTime = CONVERT(CHAR(10),GETDATE(),101) + ' 01:00AM'
SET @EndTime = CONVERT(CHAR(10),GETDATE(),101) + ' 06:00AM'
IF GETDATE() NOT BETWEEN CAST(@StartTime AS DateTime) AND CAST(@EndTime AS DateTime)
BEGIN
-- Do stuff here.
END;