Hi,
I have a little experience with SSIS (but a lot with DTS) and none with CRM 3.0.
Is it possible to use SSIS to import flat files into CRM 3.0 ?
And how ?
I read something that CRM 3.0 uses SQL server 2000. Should I upgrade it SQL server 2005 ?
Any suggestion where to read about this ?
Thanks in advance
Constantijn Enders
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedHi,
How to extract and Load Data using ADO.NET in SSIS.i hope to extract data we have DataReader source .but how to load (Insert) data with ADO.NET ?.and is ADO.Net quicker than OLEDB ?
Thanks
Jegan.T
I want to create a SSIS package as follows
Conditions
If there are about 100 records in text file, if there is an error at 43 and at 67 record respectively , it should capture 43 and 67 record in failure folder and remaining 98 records , should be processed
1) Successful record into table and move the success record from the folder
to new path say( Success folder) (98 records to table)
2) Unsuccessful records to new path (Failure folder) (2 lines )
3) Error message to capture the failed records and store them in another folder(Error log) (2 line failure information)
While writing the 3rd condition to error log table , it has to point out the record which is failed for what reason, say it may be due to invalid data type for column 10 for 43 record, and incorrect syntax error at 67 record.
I have created a package that loads data . I need advice on a quik way to schedule this baby .
Regards to ALL
I have this data in a flat file and I'm doing a data dump to a SQL table. I created a SSIS package which ran successfully but only exporting 2 rows out of 4 rows to the SQL table. For some reason my package ignore two other rows where "col4", "col5" and "col6" do not have any data. No conditional component was used in this package to not to load those records.
col1 col2 col3 col4 col4 col5 col6
849833 02/15/06 841 VS 791 49 7
849819 02/15/06 212 NA
949070 02/15/06 230 ABS
700010 02/15/06 820 VS 690 46 6
Any idea? Thanks.
Hello !
Please, this is an urgent call; May be someone issued the sama probleb I do :
When I'm trying to import a XML file, that contains diffgram, using the XML Source task in SSIS, I choose an Inline Schema Option - everything goes well...the tables and columns are displayed, and the Import task into a Database's table succeds.
The problem is that , it doesn't load any data into the table, though there are plenty .
It is possible to program part of the process of load of data within the SSIS. The origin is a Flat file (.txt and .dat) and the destiny a SQL Server 2005. All the fields of the file are not mapean origin with the destiny table and data are needed other tables that are in the Data Base.
View 1 Replies View RelatedI have 5 tables in Academy database. Like
Academy details tables, Academy Students table, Academy Student Parents table, Academy class Section Table, Academy Staff table.
I have created the tables and data into the database. And Now I need to prepare a Excel sheet to upload data into the these tables. How to prepare the Xlsx sheet and how to upload into database without using SSIS package.
I have three tables in data base:
customer
product
sales
And i want to use SSIS package dynamically load data from database into three separate flat file, each table into each file.
I know i got to use for each loop task ADO.Net schema row set enumerator, with OLEDB connection manager, select table name or view name variable from access mode list, but the problem comes, as table name is dynamic then flat file connection is also dynamic, i am using visual studio 2013...
I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies View RelatedHi Guys,
I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.
Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.
I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.
Any suggestions how I can get it to load the full data?
Thanks
We are using SQL Server 2014 and SSDT-BI 2013. We have a reporting environment where business users create objects which need to be persisted for fiscal year reporting. Let's say for instance SQLSERVER1SRVR1 they create table objects like below in the reporting environment.
Accounting2014, Accounting2015 in AccountingDB;
Sales2014, Sales2015 in SalesDB;
Products2014, Products2015 in ProductsDB;
Inventory2014, Inventory2015 in InventoryDB etc....
These tables are persisted for auditing in a different environment SQLSERVER2SRVR2 for finance & audit folks.We would want to automate this process using SSIS to create tables in corresponding database and load data. I tried using For Each Loop container but the catch is I could loop the source or destination but how do we loop on Source & Destination at the same time (i.e when source is in AccountingDB destination to be AccountingDB, source SalesDB then destination SalesDB so on etc....
I am looking for solution for "Communication link failure" since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
SQL server 2008 R2 Enterprise Edition and error description is below,
Started: 6:22:40 AM Error: 2015-08-19 18:50:32.70 Code: 0xC0202009
Source: Data Flow Task Lookup [193]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
[Code] ....
I am loading data using SSIS 2008 from a table in SQL Server 2008 DB to excel 97 sheet pre-defined with column headers. All the columns in excel is has 'Text' format property and the columns in the SQL Server table are defined as nVarchar. One of the columns has trailing spaces in few rows in DB but after exporting to excel 97, the spaces are gone. We need to retain the whitespaces in the column values. How can we do that.
View 3 Replies View RelatedWe have created SSIS package to load a text file into a table. Source system shares 10 text files and recently they stopped generating data for one of the text file (comping empty), after few months they will start generating the data for the empty file batch processing.
The Issue here is Data Flow task is getting failed while loading empty text file into table. How to handle this empty file load issue in SSIS package.
Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
I have an SSIS package that imports data. It's working fine except I've been told that the Load_Date field needs to have the same date for each record in the table (the table gets truncated and then loaded each time the SSIS package runs). I created the table with a default of getdate() for Load_Date but I've been told not to do it that way and to have a variable in SSIS to populate Load_Date to make sure it's the same for every record. I've set up a variable in SSIS. I made it a datetime type of variable. It defaults the value to the current date (at that time) but doesn't let me change it to getdate(). I think the way to use the variable is to have a derived columns step that uses the variable Load_Date and then in mappings, set the column equal to the variable. But how do I set the variable equal to getdate() so it can be used for each row?
Thanks
Hi All
I've created an SSIS package that loads data from source to destination, using Lookup and conditional Split to check New rows and changed rows for one table.
Now I want to take this father by loading data for multible table more that 100. I did it in T-SQL using dynamic sql and cursor.
How can I achive this using SSIS.
Has anyone attempted to perform a load test with SSIS? I am trying to saturate(100% processor utilization) a HP integrity rx4640 server with 60GB of ram and 4 processors, windows 2003 and Sql server 2005 in order to to build a sizing document?
We are in the process of converting our existing incremental loads from DTS to SSIS.
Currently we get all the data for the past month into temp tables in the warehouse, compare with key fields add the new rows and update changed rows. All this is done using Execute SQL task.
Is there a better way to implement the incremental logic using SSIS any new objects that be used to avoid too much SQL codes? Performance is very important and we do a lot of aggregation after the load for the reports to run faster so that we can meet customer SLA's.
We have around 20 tables that needs to be loaded 4 have large amount of data between 20 and 40 million rows out of which we will be brining over around 100 thousand during each incremental run. The other tables have less than 100,000 rows so does not hurt truncating and reloading the entire table.
Any assistance is appreciated.
Thanks!
Hi everyone. I'm trying to figure out how to run an incremental load into a Staging table.
At this point I'm not trying to Conditional Split it between "New" and "Changed" records... just the load.
The logic in my head says that after each load, you can take the most recent "modified" date/time and store that in an incremental load table. That way, next time you run an incremental load, you just have to look up that "modified" date/time, and only load the source records with a "modified" date/time later than the record in your incremental load table. Does that plan sound feasible?
I think so far my problem is that my source is on an ADO.NET connection, and my incremental load table is on my SQL Server. So when I do my load from the ADO.NET database, I cannot read the data from the incremental load table.
Is my logic flawed?
Any help would be appreciated.
Thank you very much!
I loaded a vchar column using script trans (SSIS doesn't support XML data types :/) to format the XML data properly. Since the XML data in the vchar column was not encoded, when I try to alter the vchar column to xml after the table is loaded it fails. I assume this is because the parser is having trouble with the content of the data within the xml tags.
This is how I coded the XML rather than using a xml method. "true" places the element end tag.
newXML += FormatElement("CONFERENCE") _
+ FormatElement("NAME") + ConvertToESC(RTrim(Mid(Row.activity, 1, 34))) _
+ FormatElement("NAME", True) _
+ FormatElement("START_DATE") + ConvertToESC(RTrim(Mid(Row.activity, 35, 8))) _
+ FormatElement("START_DATE", True) _
+ FormatElement("END_DATE") + ConvertToESC(RTrim(Mid(Row.activity, 43, 8))) _
+ FormatElement("END_DATE", True) _
+ FormatElement("CONFERENCE", True)
My question is, can I either load the data, using T-SQL, into an XML data type from a vchar column or is there a way to alter the type from vchar to xml without encountering the following parsing error?
Msg 9421, Level 16, State 1, Line 1
XML parsing: line 1, character 64, illegal name character
Thanks for any suggestions!
James
hi there,
when i start SQL Server business intelligence developer and create new Integration Service project, i will see following error:
Error loading 'Package.dtsx' : Object reference not set to an instance of an object.. C:SairiMy DocumentsVisual Studio 2005ProjectsIntegration Services Project12Integration Services Project12Package.dtsx
this error occures just on my PC and i reinstalled VS2005 and SQL2005 again and unfotunately the problem existes.
please someone helps me (just don't tell me to format my PC!!!)
tnx
Greetings all,
After moving all my packages to a new server, win2K3, SQL2k5, non of the SSIS packages run. They all ran fine on the other server.
The error is
"2006-03-07 13:09:38 - ! [LOG] Step 1 of job 'ExportXML' (0x4E0C7495EFE4034FA6EF94B7C7F77262) cannot be run because the SSIS subsystem failed to load. The job has been suspended"
These packages ran perfectly on the old system.
Running the package manually, using DTExec or from the Saved Packages tree in SQL is fine.
Package is saved in SQL.
Any ideas?
Especially interested in the CodePageConvert.
Installing the .msi just creates a project folder in my Visual Studio directory. I'm unclear how to get from this point to being able to choose this component from my Toolbox items in SSIS. There was a readme file that talked about gacutil.exe and .snk files that was a above my head.
Can anyone dumb it down for me?
Hi
I am new to SSIS and am looking to load XML files (with a DTD definition) into tables via a SSIS package. I have created a XML task and am able to load the XML and output it to file. I have also stripped out the DTD definition and am able through a dataflow using XML source an OLE db Destination load and map the XML to table sin my DB. But have no idea how to get the data in when it has a DTD definition included. I either want to put each file into a row in a table then query it. Or from the SSIS package input the relevant info into a set of staging tables or the real tables.
Any help/pointers would be appreciated.
HI All,
I have Uzip Files to be downloaded From ftp.companyname.com, the zip files get updated everyday thus i have to download the newly added files, the Zip file has got 13 text Files within it, the issue is:
1. how do i download it for the new zip file only, the zip files are shown below, i am trying using FTP Task, but need more info or other alternative.
2. (Optional) How do i UnZip it and and take the text files and then load them to sql server 2005, each text file has to be loaded to sql server tables.
3. How do i automate it, i mean every time i run the package (on Job based) it has to look the new file only, see the zip file below to understand what i am saying about.
02/25/2008 09:02PM 2,780,729 CompanyName_2008-02-22.zip
02/27/2008 09:04PM 1,274,557 CompanyName_2008-02-23.zip
02/25/2008 08:57PM 1,383,112 CompanyName_2008-02-24.zip
02/26/2008 04:21PM 3,327,882 CompanyName_2008-02-25.zip
02/27/2008 08:44PM 3,623,334 CompanyName_2008-02-26.zip
02/28/2008 05:27PM 3,570,243 CompanyName_2008-02-27.zip
02/29/2008 04:20PM 3,444,375 CompanyName_2008-02-28.zip
03/01/2008 04:17PM 2,655,782 CompanyName_2008-02-29.zip
03/03/2008 04:09AM 1,179,338 CompanyName_2008-03-01.zip
03/03/2008 05:21PM 1,267,777 CompanyName_2008-03-02.zip
03/04/2008 04:49PM 3,238,121 CompanyName_2008-03-03.zip
As you can see the Zip file names are the blues color, they are added at different time, when you browse the ftp.companyname.com you will get the blue color files, thus what i need is to download only the current Zip file (i mean i have to downLoad only the newly added Zip file (recent one)). Thus the SSIS Task has to go to this FTP server and look the newly added zip file. (Optional) if possible, After that i have Unzip it b/se i have 13 text files there, and then Load them to Sql Server 2005.
Please get help on this, the deadline is near by time, if possible try as soon as possible, I would like to say Thank you for every help you do and try.
Thanks,
I am trying to load a SQL 2005 table that consists of two guid values in two fields. I have a flat file in tab delimited form that has guid values as strings to load into the table. I used a flat file source module in SSIS; which then goes to a Data Conversion module that takes the flat file and does a conversion to type unique indentifier [DT_GUID]; this goes to a OLE DB destination which is a SQL 2005 table that has no records and only those two fields. I get this following primary error:
[Data Conversion [498]] Error: Data conversion failed while converting column "Column 0" (373) to column "Copy of Column 0" (511). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
An example of the two values in the .txt flat file source:
84d92cbb-4b4b-435b-8d8a-789ea930283c 328340cd-85fd-4210-8d82-000024093d7c
Any ideas what may be causing this? This should be pretty straight forward load. But it is guid which seems to always cause cast issues.
Hey,
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts --
the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
Regards, Frank
Hello,
I don't have a specific problem, I'm looking about resources because this is the tipical case when something is working but I don't know why ..
On particularly I have to load and run a dtsx package from a window application and the package is located on the server.
I decided to use .NET Remoting.
I developed my "Remotable Object" which contains:
package = Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer()
package.Execute()
etc....etc...
The window application calls the Remotable object, call the specific method and the package is loaded and run successfully.
When I studied the .NET Remoting there is also Server that expose the Remotable Object.
In this case the Server is SSIS Service but I would like to know witch port is used, which method( singlecall or singleton ) is used and so on!
where I can find this info?Someone knows some resource to advice?? or I'm working with SSIS not on a remote way?
Thankx
Marina B.