Hi,
I have some questions about SQL Servers 2000 and 2005 compatibility.
In my configuration I have to use both servers.
The cubes are stocked in 2005 server.
May I transfer from 2005 to 2000 Analysis Services the cubes?
If yes, what is the procedure? The result of migration is the same in the two different versions?
If not, how can I solve this problem?
Thanks in advance.
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
thank you
regards
Andreas
I need to use cubes in VS 2005 web project. I have no clue how to create cubes or use them in my web page. I am familiar with Reporting Services but not cubes.
thanks in advance!
Hi, i want to back up my SQL Server database and the cubes i've made on the anaysis services
i have backed up the SQL server database wihtthe wizard, and i do not know how to back up the cubes..
Is it possible, and if so, HOW??
thanx
reply @
nouman@emirates.net.ae
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." I've tested connecting to the database from Excel on a desktop and connect fine.I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the connector configuration. It's also a local admin account. There is no gateway installed on the server.
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
How to right choose key column in"Mining Structure" for Microsoft Analysis Services?
I have table:
"Incoming goods"
Create table Income (
ID int not null identity(1, 1)
[Date] datetime not null,
GoodID int not null,
PriceDeliver decimal(18, 2) not null,
PriceSalse decimal(18, 2) not null,
CONSTRAINT PK_ Income PRIMARY KEY CLUSTERED (ID),
CONSTRAINT FK_IncomeGood foreign key (GoodID) references dbo.Goods ( ID )
)
I'm trying to build a relationship(regression) between “Price Sale” from Good and “Price Deliver”.But I do not know what column better choose as “key column”: ID or GoodID ?
It is possible to create Analysis Services project (*.dwproj) in Visual Studio 2012 Data Tools?
View 5 Replies View RelatedI have a cube with 20 dimensions. I have two dimensions with more than one million of members. When I process these dimensions Analysis Services 2000 create files with "axis" extension. What are these files? Why, when I start MSSQLServerOLAPService or when I process another cube in another OLAP database, these files sre updated?
Paulo
Hi,
I have a problem with Microsoft Analysis services, we already configure the boot.ini and the registry to use 3GB in RAM, but 2 or 3 times in a day we should restart the services to clean the memory, as you can see thats not acceptable. The application that use the OLAP is OutlookSoft . Here the scenery
SO. Windows Server 2003 Enterprise Edition with SP 1
RAM 4 GB
Analysis services 2000 with SP 4
I hope you can help me with any idea.
Thanks
i create a model mining
CREATE MINING MODEL [a'S]
( [Cusid] LONG KEY ,
[Orderdetails] TABLE PREDICT ([Productid] LONG KEY )
) USING Microsoft_Decision_Trees
i can show for customer some products other when he choise a product.
ect: he choise A, i show he B, C, D ....
but for that, i must know his cusid.
now i want show B,C,D when one man choise A ( i don't know his cusid). how i do that.
( i'm using sql server and analysis service 2000)
Hi,
I've created an SSIS package to process cubes on Analysis Services 2005. This works fine.
Now I wish to use the same package to run Cubes on Analysis 2000. I have changed My connection manager to point to this DB. When I test connection it works fine.
The problem lies, when I try to edit the Analysis Service Processing Task. I get an error message saying:
"A connection cannot be made-Make sure the server is running".
I can get into Analysis Manager ok, and see the database there.
Hope someone can point me in the right direction here?
Thanks in advance
Hello:
How do I connect to an Analysis Services 2000 cube while in Integration Services? My idea is to execute an MDX query from within a package, and then stage the data to a SS 2005 table for a RS report to query.
Thanks in advance for your suggestions!
Tim
G'day,
I've got a software development PC that was running SQL 2000 + Analysis Services + Reporting Service (sp4 from memory). I then installed SQL Express 2005 and later then SQL 2005 Standard (dev) + Analysis + Reporting and upgraded to Sp2 last month.
To help improve the performance of this poor little PC, I've gone to Control Panel and uninstalled SQL 2000 service. I've also used the SQL 2005 Surface area configuration tool to switch off the SQL Express instance from running. Practically, I probably should remove the $SQLExpress instance.
The problem I'm faced with is the SQL 2000 Analysis and SQL 2000 Reporting service is still registered as Windows Services and showing the the SQL Server Configuration Manager (2005), but there is no uninstall option in the control pannel. So I can't work out how to uninstall these software and services.
It is also apparent that there are a series of "files" in the C:Program FilesMicrosoft SQL Server80* directory like ..ToolsDevToolssamples*.* directory and others that shouldn't really be there if I've uninstalled SQL 2000 via the control panel.
Is there a SQL 2000 cleanup or removal tool that will help remove these old services and files?
Does anyone have some suggestions on how to cleanup my development PC without the full operating system installation?
Can I have a SQL 2005 database as the datasource for Analysis Services 2000? If Yes, what Driver should I use to connect to SQL 2005?
Prakash.P
The secret to creativity is knowing how to hide your sources!
I have SQL 2005 SP1 already installed and I am trying simply to add Analysis Services in without screwing anything up.
I re-run setup from the original CD, but then I receive the following warning:
To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
Can I safely continue with the installation and just check Analysis Services since it is just a warning? And after the install re-run SQL 2005 SP1 or is there a way to add this from the SP1 installation files, please help.
I have been geting an error every once in a while shown below:
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.; 08S01.
I look at other messages here and found people that say it is a network communication problem, but I am runing Analysis Services and SQL 2005 on the same box. Can anyone help with this?
Thanks
Pat
Will Analysis Services 2005 work against a SQL Server 2000 database without SQL Server 2005 installed? Does Analysis Services 2005 require SQL Server 2005?
I have a data-centric application using SQL Server 2000. Personally, as a developer, I would love to upgrade to SQL Server 2005, but that's really not an option for another year or so for business reasons outside of my control.
I would like to add an Analysis Services cube based reporting system on top of my existing relational database. I've heard Analysis Services 2005 is much improved over 2000 and would really like to use that. Is this at all possible?
I've also heard of problems when installing SQL Server 2005 on the same system as SQL Server 2000. This makes testing the waters very difficult for me as I'd have to use a completely separate dev system.
hii
what is SQL Server Analysis Services 2005 ??
thank you
Hi,
With SQL Server 2000, the Enterprise Edition was required to access
Analysis Services across domains.
Is this also the case in SQL Server 2005, that the Enterprise Edition
is needed?
Thanks, S
Hi,
I need to calculate the average of an existing measure of my cube.
The measure is PA_Salaire from a column of my fact table.
I would like to calculate an average i could use with all the dimensions of my cube but i think i can only create one linked to a single dimension. Is that true ?
I dont really understand the way i should write my request. Here is what i did:
(Manager is one of my dimensions, it has a parent child relation... is that a problem? does it change the way i should do?)
Avg(Descendants([Manager].CurrentMember, [Manager].[Name]), [Measures].[PA Salaire]
But that doesnt work at all i get the following result: " #VALUE! " for every manager
Thx for your help
Francois
Hi to all
I have a complex scenario , so first I want to ask out the feasibility of it . I think its better if I state the scenario and some one on this forum reply to it , I need to build an application (e.g credit card application , Loan Application etc ) that requires some approval from expert , what I firstly want is that I apply datamining on this data so that next time when I enter the data the result (approval or reject ) should be given by datamining tool , this I gather is poosible by using Analysis Services in SQL 2005 , but I also want the bases of that decision ( I mean the rules/some thing else that the Datamining created agaisnt the data entered ) , So can any one do any help on this , you can also reach me at razi_rais@yahoo.com . its preety much urgent so your prompt response is higly appreciated.
Thanks and Regards
Razi Bin Rais
My first question is can I run Analysis Services 2005 on a different server to where the databases are running
If yes, any pointers to some articles.
I have the next problem:
i have MS sql server 2005 installed in a server.
We have some olap cubes in the server deployed with analysis services 2005.
When we try to connect to the analysis server from a client pc using pivot tables we obtain this error:
"Errors in network layers. Error code=0XC10D0009, External code=0x00000000"
The client pc has panda antivirus (corporate) with true prevent
When i unisnstall it, we can connect to the analysis server and to the cube normally and when we install the antivirus again (without true prevent and with the minimun options) the problem starts again and we can't conect to the analysis server.
Anybody had a similar problem?
Anybody knows a solution for it?
Thanks
Jose
coormx@yahoo.com.mx
I made an analysis services project but I can't deploy it because it can't find the server
I search for the analysis service in the Service Control Manager but I can't find it.
Is it possible to download and install it with this version of sql server (workgroup) ?
Hi experts,having a parent-child-table with the columns child_id, child_name, parent_idin SQL Server 2005 I just cannot create a parent-child dimension in BI DevStudio. Can anyone give me some hints? The Dim Build wizard doesn't createthe hierarchies, manually setting "parent" property to parent_id and "key"to child_id as well as dragging and dropping the stuff into the hierachyfield haven't just led to success. I also tried to right-click bothparent_id and child_id to create a member property. It just never workedout.Any help would be greatly appreciated.Kind regards,Joerg
View 1 Replies View RelatedHi,
I've been trying to use Analysis Services 2005 Cube as a data source, query it via MDX and then use the data returned elsewhere in SSIS.
However, I've been unable to get this working and can't find any information regarding how this can be done. Surely it should be possible when I can get this working even in Excel?
I've looked in December edition of BOL and no luck - have also sent a feedback to BOL regarding this and have been told that "it should be possible, since there is a way to send SQL queries to AS." However the person I was speaking with knew of no one who had actually tried this scenario and to try posting here.
Any help as to how to get this done would be greatly appreciated.
NR
I've got a RS2000 report from Analysis services 2000. This report is working fine but after the upgrade to SQL2K5, i'm having issues with changes to parameters.
Basically i'm passing DateQuarter, CustomersLevel as parameters to the following mdx script. I've tried to change mdx script in RS2005 but no luck yet. I don't much about the parameter level changes in sql2k5. So can anyone suggest what is wrong in the script.
In sql2000 the script looks like this...
="with " &
"member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' " &
"Member [Measures].[CustomerUniqueName] as '[Customers By Class].currentmember.UniqueName' " &
"Member [Measures].[CustomerDisplayName] as '[Customers By Class].Currentmember.Name' " &
"SELECT " &
"{[Measures].[CustomerUniqueName],[Measures].[CustomerDisplayName]} on Columns, " &
"filter({descendants(" & Parameters!CustomerClass.value & ", [Customers by Class].[" & Parameters!CustomersLevel.value & "], SELF)}, " &
" [Measures].[Ex Price] > 0) on rows " &
"from Sales "
i've changed the script in sql2005 but not working yet..
with
member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)'
Member [Measures].[CustomerUniqueName] as '[Customers By Class].currentmember.UniqueName'
Member [Measures].[CustomerDisplayName] as '[Customers By Class].Currentmember.Name'
SELECT
{[Measures].[CustomerUniqueName],[Measures].[CustomerDisplayName]} on Columns,
filter({descendants( STRTOMEMBER(@CustomerClass), "[Customer Class]." + STRTOMEMBER(@CustomersLevel), SELF)},
[Measures].[Ex Price] > 0) on rows
from Sales
Thanks in advance..
Vivek
hello,
Is there anyway that I can connect InterSystems Caché to analysis services 2005?
When I try to create data source in Analysis service, I cannot find ODBC support.
Thanks,
Negin
Hello all, Im a beginner on AS2005 (but I know pretty well AS2000), I migrated a cube from AS2000 to AS2005 but in this cube I have a Custom Rollup Formula on two levels of my Time dimension (month and week), an example of the week level formula is the next:
iif( [Time].CurrentMember.Name = [Time].CurrentMember.NextMember.Name,
null,
iif( [Time].CurrentMember.Name = [Time].CurrentMember.PrevMember.Name,
Sum({[Time].CurrentMember.Children,[Time].CurrentMember.PrevMember.Children}),
Sum([Time].CurrentMember.Children)
)
)
<<this formula overrides the week aggregations>>
and I really need this but I cannot find on AS2005 where to do the same thing, someone can tell me where can I define Custom Rollup Formulas and how?.
Thanks in advance!
Hi,
Can anybody tell me How to access Analysis Service 2005 cubes through normal Stored Procedure.
Basically can write a stored procedure that we normally write in database service and use it access the Analysis Service 2005 cubes.
Is it possible
Regards,
gokul