Hi All,
I need to raise an error in the Application Event log based on a condition. The condition is, if a query returns any rows, an error has to be logged. For that this is what I am doing:
Code Snippet
If exists()
RAISERROR ('There are agents that have not hearbeated within the last 15-30 mins', 16, 1) WITH LOG
Now, in addition to the message in the RAISERROR, I would also want to display the results of that query in the If Exists block. How can I do that? If this is not clear, below is something which I want to do. Is this or anything similar possible?
Code Snippet
If exists(<Select * from table>)
RAISERROR ('There are agents that have not hearbeated within the last 15-30 mins', 16, 1, Select ServerName from table) WITH LOG
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' FROM myTables WHERE Conditions are true ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' INTO AuxiliaryTable FROM myTables WHERE Conditions are true ORDER BY Field01 SELECT DISTINCT [Field02] FROM AuxTable The the results are:
Field02
----------------------
22810 8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760 22810
Is there any good suggestion? Thanks in advance for any help, Aldo.
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E
can any one help me in this? please give me a sample query.
I have 3 tables, with this relation: tblChats.WebsiteID = tblWebsite.ID tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
Hello How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement. <% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>" ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)"> <SelectParameters> <asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" /> </SelectParameters> </asp:SqlDataSource>any help would be appreciated
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees, ( SELECT COUNT(gifts.donor_id) AS Count2 FROM gifts WHERE gifts.donor_id = ed.id_number ) subquery2
In my Windows application I use sqlCmd.ExecuteNonQuery() to execute the stored procedure, In case of an error in the stored procedure I need to return an exception to application, will RAISERROR in stored procedure accomplish that?
Hello,I am raising an error on my SQL 2005 procedure as follows: RAISERROR(@ErrorMessage, @ErrorSeverity, 1)How can I access it in my ASP.NET code?Thanks,Miguel
hi RAISERROR is used to return message to the caller. how to contain RAISERROR : variable declare @name varchar(50) and string 'Welcome' i want to contain the RAISERROR messege 'Welcome' + @name value in the same time ex Welcome Zaid can give the code to do this thank you
just cant figure out why my raiserror print Wrong RoleType for customer lientID for :- RAISERROR('Wrong RoleType for customer %ClientID', 16,1, @ClientID) what's with missing C? is % some kind of escape char or something? (im trying to print back the parameter @clientid), or should i just use the print ''
This statement adds a new message to the master..sys.messages table
EXEC sp_addmessage @msgnum = 60000, @severity = 16, @msgtext = N'The item named %s already exists in %s.'
But if this error happens, how is an application supposed to access this message? (The average app shouldn't need to access to the master database to get this info.)
In my Windows application I use sqlCmd.ExecuteNonQuery() to execute the stored procedure, In case of an error in the stored procedure I need to return an exception to application, will RAISERROR in stored procedure accomplish that?
I have used RAISERROR on some of our pages before, and it worked fine. Now I have a page that has a formview with a sqldatasource that does an insert. If the value for a certain field exists already in the table, I am trying to use RAISERROR('message', 15, 1) to have a popup error. The page does a redirect in the iteminserted event. When I try to insert with data that should cause an error, it doesn't insert into the database, but I don't see an error. The page just redirects... any ideas what could be done to fix this?
When I use the following code to execute a RAISERROR from within a CLR Routine (Stored Procedure), and I call this CLR stored procedure from T-SQL within a TRY/CATCH block, the error is not caught in the CATCH block. Why is this happening? Is there any way around this? Any help much appreciated.try { SqlContext.Pipe.ExecuteAndSend(cmd); } catch { }
I have an Alert and a Raiserror which I need to do 3 things. 1. Recognize the error (that works) 2.Raise the alert and email the error message to support 3. Return the error message raised to the user application.(not working) is returning the error message to the user related to the way the application runs or is this a fairly generic function. (This is sort of an oddball app which is compiled C++ that inteprets data to create it's screens.)
