Hi folks, i am lookin for an option in the QA to take user input while executing a query. just like we do in SQLPLUS:
SELECT * FROM dept WHERE deptno=$abc
here it would ask me for the deptno. I guess it's a very handy feature and we could test our variables and calculations withing the procedures etc.
Is there a way, or any substitute?
Howdy!
Hi Everybody,
For a particular user, how to find what are all the tables he has been given the grant permission,etc., thru' query analyzer.
Can you please tell me, is there any command or system stored procedure is available to find this problem.
regards,
John
Hi,
I am new to ASP.NET so pordon me if my questions seems to be stupid.
I was given an assign to develop a ASP that would return results from a SQL server.
The problem is that part of my query to the SQL server comes from the webform
select a.invnum, a.invdate, a.duedate, a.invamt,a.payamt from vpshead a inner join vendors
b on (a.vendnum = b.vendnum) where (a.vendnum = " & user.text & " ) and (b.vendpass = "
& Pass.text & " ) and (a.payflag <> 'V') and ( (a.invamt <> 0) or (a.payamt <> 0) )and (a.chkno = '') order by a.invdate"
As your can tell I am using the user.text and Pass.text in my query which will come from the web form.
I know this is wrong but how else can I do it?
Thanks
I m new to SQL Server. Before this I was using access. In access one can have user inputs easily .. for example
where receivedate=[enter date]
how I can get userinputs in SQL server Query....
Forgive me if it is a dumb question
I would like to setup a query where the user is firstly prompted to input the information e.g. if they are trying to locate a particular person from a telephone database they would be prompted to enter the surname for that person.
View 4 Replies View RelatedHello Everybody,
I am sure this has been asked a thousand times before in a thousand different ways, but here goes...
I am in need of the ability to prompt users for a From Date and To Date to insert into a WHERE clause in SQL queries. What is the easiest least painful way of accomplishing this? A great many of our customers utilized SQL Server Express or MSDE, so they do not have the full gambit of SQL tools handy. Believe me when I say that I have searched high and low across the internet for this solution. I was hoping I might be able to accomplish this through VB Script or J Script. Or, anything reasonable.
Thanks in advance for your time and patience,
Rocky Mountain Tech
I have a problem selecting fields from a table where fields are equal to user input from a listbox. example
listbox of zip codes:
33023[red]22300[/red]39844[red]29339[/red]23883[red]38228[/red]
user wants to retreive highlight zip codes from database.connection working perfect.Thank you for your help.
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies View RelatedHi all,
Can anyone tell me about how to prompt a user to type when running a sql statement through query analyzer.
thanks
Jay
I have created a query that has a "When" and an "And" function.
I know need to make the query run on user input, i want it to ask for the date, then name to run the query
Afternoon...
I have a database for a pretend dvd hire company and need to create a query that uses user input as part of the query.
Ie, select * from dvd where actor = 'Tom Cruise';
The 'Tom Cruise' part of the query needs to be user input every time the query is ran... Can you help?
Many thanks in advance!?
Is it possible to allow user input via a Reporting Services Report? What I mean is could a report be created that would allow someone using the report to enter a number that would be written to the SQL database?
View 1 Replies View Related Hi, Just wondering if I could make sure that "hackers" don't tamper with my querystring - which is a parameter for a SQL query. i.e... Dim ListOfValues as string = request.querystring("listOfValues")
'Output would be this: 324234,5445,554654,45632,SQL command : Delete From table where product_id IN (@ListOfValues)
cmd.paramaters.addwithvalue("@ListOfValues", ListOfValues )
How can I validate it so that hackers can't add any characters other than 'numbers' and ' , ' to the sql parameter? I have tried to tryparse the 'ListOfValues ' as an integer - by replacing "," with "" but an integer overflow occured. Any questions or ideas? Thanks
To: All,
well here's a problem that I encountered, i got a textbox that is used to store the Date of Birth of a user. So when user keys in something, it is store as a string. However i wish to convert it into a datetime so that i can store it into my database. Anybody know of a way to help? i've tried countless methods but doesn't seem to work. Please give me a hand guys.... Thanks
From: iaciz
Hi there
I want to give dynamic input to the t-sql code in sql analyzer.how do i do that....
Like adding 2 numbers
declare @a integer,@b integer,@c integer
--I dont want to give like this
--set @a = 5
--set @b = 10
set @c = @a + @b
can anyone help me with this
regards
Vic
Vicky
Hi,
I am trying to make a simple stored procedure which I want to take input on every run from end user:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
declare @sku varchar(20)
insert into skua (sku,SumOfQtyNum)
(select sku,sumofqtynum from sku where @sku = sku.sku)
it is working but not asking parameter values
(I want to use passthrough query after that in Access)
thanks
AA
Hello. I'm using SQL query analyzer to run some queries against anSQL2000 DB. Unfortunately, my previous SQL experience is some OralceSQL I took in school.To put it simply, I'm trying to write a query to pull records thatmatch a variable input. In Oracle, I'd use a substitution variablelike this...SELECT * FROM jobs WHERE jobid = &job_id_to_query;Is this possible under SQL2000? Is this only a feature of SQL*Plus?TIARich
View 8 Replies View Related I want to pull dates from my database that are between to set dates i have written a query that does this which looks like this:
"SELECT OCH_ID, empno, Selected_OCD, Start_Time, End_Time, Selected_OCDay, Selected_DOM, Selected_Month, Selected_Year FROM dbo.ICT_On_Call_Hours WHERE (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) >= CONVERT (datetime, LEFT ('12/02/2007', 2) + '/' + SUBSTRING('12/02/2007', 4, 2) + '/' + RIGHT ('12/02/2007', 4))) AND (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) < CONVERT (datetime, LEFT ('14/02/2007', 2) + '/' + SUBSTRING('14/02/2007', 4, 2) + '/' + RIGHT ('14/02/2007', 4)))"
This works when the dates are included in the statement but when i try and use parameters to pull them in like this:
"SELECT OCH_ID, empno, Selected_OCD, Start_Time, End_Time, Selected_OCDay, Selected_DOM, Selected_Month, Selected_Year FROM dbo.ICT_On_Call_Hours WHERE (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) >= CONVERT (datetime, LEFT ('@Choice1', 2) + '/' + SUBSTRING('@Choice1', 4, 2) + '/' + RIGHT ('@Choice1', 4))) AND (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) < CONVERT (datetime, LEFT ('@Choice2', 2) + '/' + SUBSTRING('@Choice2', 4, 2) + '/' + RIGHT ('@Choice2', 4)))"
I then recieve the following error message why is this?
ERROR -------------------> Syntax error converting datetime from character string.
Any Help would be greatly appreciated thanks
I have a search page that allows users to type/select values contined within the entry they're looking for. My SELECT statement returns columns in a table that get compared to the user input. So if someone selected Status (Open) then all of the 'Open' Request entries should populate the search page. How do I phrase the SELECT statement to compare values if the user gives them, but ignore the fields where no data was input when it's searching? So a search where no values were entered would return every Request Entry instead of an error; no entry.
Thanks!
I need to convert user's input to SQL statement.
How to code to chage user's input:123, 234 to '123','234'
Hi I have a table(tblA) as follows
Col1--------------col2---------col3-----col4
London------------1131---------299------Barking
Didicot-----------3451---------429------Dansdon
Barking/ASton-----1131---------345------Singleton
Vander/ADon/cam---3907---------299------derby
Null or Blank ---1131---------423------Addington
Expecting the Data should display look like below
London------------1131---------299------Barking
Didicot-----------3451---------429------Dansdon
Barking/ASton-----1131---------345------Singleton
Vander/ADon/cam---3907---------299------derby
But when user change the col2 value (1131) to 113999, this should be changed to all values where col2 is 1131. Please Help
I dont know how to get the newest input for each user from one single table.
Should be a very simple task but i cant work it out.
The table looks like this:
ID (A_I), userID, ip, date(timestamp)
Here is a SQL Fiddle Link with some data also: [URL] ....
I have tried a lot querys like this one:
SELECT userID, ip FROM userips GROUP BY userID ORDER BY ID DESC
But this one does not give me the latest ip which was entered by a user.
Hello,
I'm trying to do something simple that has turned out to be a frustrating problem. I have a field in my report that needs to be populated by user input. Based on this user input, I will use the field in a calculation. The simple solution to me, was to create a custom assembly that has a function that uses Console.Write("Input Data") and Console.readline() to assign the input to a string, and then return that string to the report. This works fine in a test console application, but when I copy and paste the code to my custom assembly, it returns #Error to the report. I've debugged, and found that when I hit F10 on Console.Write("test"); it skips right over it, and nothing happens. It also skips over Console.readline(); with nothing happening. This makes me unable to take the user input and set the textbox equal to that value.
Am I doing this completely wrong? Is there something I'm missing, or just not understanding correcly? It seems like reporting services has to have this option. I'd really appreciate some advice. Thanks!
-Paul
Let's say I have a table with 3 fields: an ID field (primary key, set as an id field, etc.), a Name field (nvarchar50), and an Age field (int). I have a form that has three elements:
DropDownList1: This drop down list contains 3 choices- "=", ">", and "<".
Age: This text box is where someone would enter a number.
Button1: This is the form's submit button.
I want someone to be able to search the database for entries where the Age is either equal to ("="), greater than (">"), or less than ("<") whatever number they enter into TextBox1.
The code-behind is shown below. The part I'm confused about is that if I load this page, the query works the -first- time. Then, if I try to change the parameters in the form and submit it, I get the following error:
"The variable name '@Age' has already been declared. Variable names must be unique within a query batch or stored procedure."
Any help would be appreciated.
Here is what I'm using in my code behind:
protected void Button1_Click(object sender, EventArgs e) { System.Text.StringBuilder sb = new System.Text.StringBuilder(); sb.Append("SELECT * FROM People WHERE Age "); switch (DropDownList1.SelectedValue) { case "=": sb.Append("= "); break; case ">": sb.Append("> "); break; case "<": sb.Append("< "); break; } sb.Append("@Age"); SqlDataSource1.SelectCommand = sb.ToString(); SqlDataSource1.SelectParameters.Add("Age", TypeCode.Int32, Age.Text); }
I know this is an easy one and I know I've read it somewhere, but I can't seem to write the correct format to run correctly. I am trying to build a SELECT statement base on the selected values of a dropdown list on a webform. The selected values will be part of the Table name.. ("client_info" & location_option.selecteditem.value) Can someone show me the correct syntax for adding a form variable into a SELECT statement? Thanks
View 1 Replies View RelatedI'm running asp.net on an XP machine with MSDE 2000 as the database. I want to create a user table with a userid and password. I have a second table that contains details about the user such as home address and phone number etc. When the user first signs up, I want their userid to go into the user table and the user detail table. In my SQL insert command, I can't get @userId to go into both tables. So my question is how do I get the userID to go into both tables or is there a better way of doing this altogether?
Thanks,
Tom
I have a table has following fields(Process, datestart,dateend,datedue,,,,)
Process datestart dateend ...
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
C 24.07.2014 30.07.2014
What i want when user enters from date and end date. i want to filter records which are fallen between those two input dates.
if user enters 17.07.2014 and 20.07.2014 as input range. query should show only A and B process as
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
hi ,
i am new to this.
how should i update the user input values into sql server database?
i am using asp.net and c#
FIELDS are-
userId,
name,
description,
startTime,
endTime,
audiencePassword,
presenterPassword
i know it must be simple...but i haven't worked on this before.
Jaimin
how can i make a customized error message for a wrong input of parameters?
let's say i have a parameter which requires user input of companyID and it should compose of all numbers only. if not followed an error message will be prompted to the user... "please enter numbers only..." or something like that...
please... just wondering if its possible...
Is it possible to display multivalue user input parameters within the report, so the user can see what he just entered in the parameters? I only can get the first or the second value within a textbox: (parameters!year.value(0) / parameters!year.value(1))
The desired output i want to achive is that the multiple selections are displayed within one text box:
Example:
Parameter Year: 2006,2007,2008
Any suggestions?
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
Edited by SomeNewKid. Please post code between <code> and </code> tags.
Right now i'm just trying to get the page to update SQL, but its not working no errors or anything but still not updating?!?!
Any ideas? Thanks in advance
Ben
<%
Dim cnnSimple ' ADO connection
Dim rstSimple ' ADO recordset
Set cnnSimple = Server.CreateObject("ADODB.Connection")
cnnSimple.Open Blah Blah Blah
Set rstSimple = cnnSimple.Execute("SELECT * FROM WK_DATA WHERE WEEK_NUM = 2")
%>
<input name="Submit" type="button" value="Add">
<%
If Request.Form("Submit") = "Add" Then
cnnSimple.Execute("UPDATE WK_DATA SET PRICE = (PRICE + 1) WHERE WEEK_NUM = 2")
rstSimple.update
End If
cnnSimple.Close
Set cnnSimple = Nothing
%>
In Access, I use [Enter Date] in the Criteria field of the Query. I tried the same thing in SQL Server in the Criteria field of the View and it does not recognize this. Is there a comparable command in SQL to get user input into the Criteria field of a view?
View 4 Replies View Related