User Connection Changes In Activity Monitor When Running Stored Proc
May 16, 2007
Please forgive the simplicity of this question - I am not the dba type. When I connect to a server and look at my connection attributes in activity monitor, the user column shows the correct information for my domainusername. When I run a certain stored procedure in that connection, the domainusername changes to another person. We are not using execute as, setuser, or anything special to explicitly change the user. The stored procedure is in a schema that is owned by dbo (principal_id = 1 - I verified by checking sys.database_principals.)
Does anyone have any suggestions?
Thanks in advance,
John Hennesey
View 4 Replies
ADVERTISEMENT
Apr 14, 2015
Is there anywhere in the SSMS to see the start time of a currently running job, currently running it's first step, without needing to run a query?
If not, why would Microsoft decide to not show it in the job activity monitor?
SSMS = Sql Server Management Studio
View 1 Replies
View Related
Aug 19, 2015
If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:
1. I get all the panes and charts except % Processor Time.
2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.
Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”
3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.
4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.
View 4 Replies
View Related
Mar 14, 2008
One of my stored procs, taking one parameter, is running about 2+ minutes. But if I run the same script in the stored proc with the same parameter hardcoded, the query only runs in a couple of seconds. The execution plans are different as well. Any reason why this could happen? TIA.
View 6 Replies
View Related
Apr 10, 2008
Is there a way to allow a user to run activity monitor without making that user system admin
View 9 Replies
View Related
Apr 23, 2008
Hi experts,
I just want to know how can i kill all the processes of a database
if the database have more than 100 connections.This is for the purpose of restoring a database.
RKNAIR
View 3 Replies
View Related
Apr 10, 2007
Is there a way to give access to non-admins on ACTIVITY MONITOR?
------------------------
I think, therefore I am - Rene Descartes
View 2 Replies
View Related
Sep 10, 2007
Hi,
I have a problem with Job Activity Monitor.
I have a SSIS which copies data from a table to a flat file. The connection string of this file is variable and the file is reused if not exists and is created if exists.
When I run the SSIS manually from my microsoft visual studio it works properly. However, when I run this SSIS from the Job Activity Monitor, I get the following error:
Message
Executed as user: REDCAMadminsql2k5. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:41:10 AM Error: 2007-09-10 08:48:04.99 Code: 0xC020200E Source: Crear Historico Historico [1] Description: Cannot open the datafile "\srvnfileHISTORICOSCAJEROSOFI3210C01OFI3210C01_2007-7X.txt". End Error Error: 2007-09-10 08:48:04.99 Code: 0xC004701A Source: Crear Historico DTS.Pipeline Description: component "Historico" (1) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:41:10 AM Finished: 8:48:53 AM Elapsed: 462.234 seconds. The package execution failed. The step failed.
Any idea?
Thanks.
View 3 Replies
View Related
Oct 5, 2007
Hi All,
I want to analyze server (SQL 2005) activity at a specific time in the past. Unfortunately, there doesn't seem to be a log file reflecting the information in Activity Monitor. Knowing that the sysprocesses and syslocks tables feed Activity Monitor, I thought about doing a log analysis on the master transaction log, but I'm not sure that's possible.
Is there a (different) way to achieve this?
Or is there a better approach to identifying processes that cause performance bottleneck/deadlocks?
Any input would be appreciated.
Ken
View 4 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Feb 6, 2007
Hi,
I've been using the Job Activity Monitor quite a lot and last night I installed Service Pack 1 for SQL Server 2005. I've noticed now that I only have a "Start Job at Step" option when I right-click a job. Whereas I used to have just Start Job or both Start Job and Start Job at Step options.
The problem is that Starting a Job at a Step, produces a modal dialog box which prevents further access to Job Activity Monitor until the job is complete.
Does anyone have any comments regarding this?
Thanks in advance,
Richard.
View 1 Replies
View Related
Apr 19, 2007
I'm hoping that someone has experienced this problem before and knows how to get round it.
The problem we are having is that we have a job that is scheduled to run at 4:00 am each morning, for the past 6 weeks it has done this with no problem. However, this morning it failed. we know it failed because it didn't produce the results it was supposed to. However the monitor said that the job had completed successfully. On examining the history of the job we found that the job was still running!!! When we tried to stop the job by right clicking and selecting the appropriate action. The action available to us was to start the job.
After arguing for a bit we decided to try and run the job again. We did this and found that the job running in the history screen terminated with an error and than ran and completed successfully.
Confused? So are we any ideas or solutions gratefully received
View 3 Replies
View Related
Apr 4, 2007
Hi!
I want to extract the same information as the Activity Monitor does with SQL in SQL Server 2000.
Have tried to use sp_who2 but I miss some important columns.
How do I do?
Thanks!
View 2 Replies
View Related
Oct 25, 2007
If you are in SQL Server Management console, go to Job Activity Monitor, there is an option 'View Refresh Settings'. You have to enable/check the Auto Refresh option here every time. Is it possible to keep this Auto Refresh enabled?
Thanks!
Olaf
View 6 Replies
View Related
Oct 15, 2014
I have a SSIS package set up that will transfer a file from a location on the network drive and transfer it over FTP to another location.
When I manually run the package, the file is transfer with no errors. But when the job is automated (via Job Activity Monitor) the transfer fails?
I have set the ProtectionLevel of the package to "EncryptSensitiveWithUserKey" and also converted the package to a Development Model. The settings for the FTP is saved within the package.
What am I missing? below is the error message
Executed as user: UHBInfoSQLAgent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 08:43:02 Error: 2014-10-13 08:43:03.72
Code: 0xC001405F Source: ResearchWebsite
[Code] .....
View 2 Replies
View Related
Feb 22, 2015
We have killed a job which is now in KILLEDROLL BACK state. Job activity monitor is not showing any running jobs but I can see the SPID of that job. When tried to kill again its giving the message ‘command completed successfully‘, not able to get the percentage or time for the roll back to complete.
Another DBA tried to create a snapshot and it was stuck and I believe it was because of this ROLLBACK as both were using same Database.
View 5 Replies
View Related
Jun 4, 2007
All;
We have a Windows App and Web App that share business objects which points to a single database. When a Windows user logs in, an average of 50 processes are created in the first few seconds and never go away. The details window is blank and they all remain sleeping from that point on.
I have stepped through the code to see if there is anything odd going on but most of the processes are created when validating the number of parameters the stored procedure has or the length of the stored procedure name. This translates to 1000-1500 processes on average.
Is this normal? Will it hurt performance? Is there a way to remove them?
View 1 Replies
View Related
Apr 23, 2013
When I try to open Activity Monitor from SSMS I receive the message "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)". - more details below.
I have a SQL Server 2012 Enterprise SP1 installed in an Active/Passive cluster configuration on Windows 2008 R2 Enterprise SP1. The problem happens using sa and a domain administrator.
------- more details -------
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
[Code] .....
View 5 Replies
View Related
May 18, 2007
The activity monitor is not showing entries for hosts which connect via sql logins (odbc), is this normal? Where can I find a list of protocols in which the hostname/ip can be picked up. We're on SQL 2005 SP1/Build 2153
Thanks
View 2 Replies
View Related
Sep 26, 2007
Hi
we have one 'application'-user in sysusers that makes the connect to SqlServer for all users, for example:
Application Login-User: Thomas
DB-Connect-User: AppUser
With this solution, in Activity-Monitor or with sp_who I don't know, what is the real name of the connected user.
Any possibility to change the login-information after the connect, so that i can see 'Thomas' in Activity-Monitor or with sp_who?
Thanks for your help.
Thomas
View 4 Replies
View Related
May 28, 2015
Is there a way to permanently change the order of the columns in Job Activity Monitor?
I'd like to move Duration to the right of Step Name, but this only lasts so long as I have JAM open. Once I close it and re-open, JAM goes back to its default column order. Google gives me nothing but the temporary "drag and drop" method that I already know about.
View 2 Replies
View Related
Oct 18, 2000
Is there any way to call a DTS package from within a stored procedure?
EXEC(dtsrun <myDTSpackage>)
Thank you.
View 5 Replies
View Related
Sep 27, 2006
For SQL Server 2000 we have a user login mapped to msdb with database role membership of db_datareader and public checked. This seems to allow the developers to view the Management Activity monitor. For SQL Server 2005 the same mapping is in place but the developers cannot view the Management Activity monitor. Developers are NOT granted the sysadmin role, and should not have that role.
What permissions need to be set for SQL Server 2005 to allow users to view the Management Activity monitor? They should not be allowed to take actions on the activities.
View 13 Replies
View Related
Jul 29, 2014
I have a stored procedure in SQL Server 2008 (the stored proc is actually stored there with a name) and I can run it with the 'exec storedproc_name insert_date' command (my stored proc needs a date to run).
The stored proc just creates a temp table with some data (but we can ignore this bit).
I only need a way to run this stored proc remotely (I dont care about getting the data, I just need to run it in the server).
Is there any way of doing this? Preferably via a unix system? I just need a way to run the 'exec' command. Returning data etc. isn't needed.
View 2 Replies
View Related
Oct 27, 2006
How does one prevent a long running procedure form crapping out in CLR?
I am trying to do a pull from a distant data source and it works, except I have to break down my stored procedure call into several smaller calls. I would like to do everything in one shot, but I get the thread abort exception when I try to get a lot of data.
Any ideas?
Thanks.
View 3 Replies
View Related
Sep 3, 2006
hi,
im getting an error when i run the stored proc with a string parameter in execute sql task object.
this is the only code i have:
exec sp_udt_keymaint 'table1'
I also set the 'Isstoredprocedure' in the properties as 'True' though, when you edit the execute sql task object, i can see that this parameter is disabled.
How do i do this right?
cherrie
View 3 Replies
View Related
Jan 31, 2007
Hi. I've got a report with 4 different sections - the datasets coming from some tables that are populated via a stored procedure. I'd love it if the the first thing this report did was run that stored procedure and then the data would be available for the actual reporting piece. Is that possible? And if so, how do I make it work?
Thanks!
View 10 Replies
View Related
Mar 14, 2007
Hi,
We have development and user acceptance (UA) servers. When I start a job on the development server, on the management studio, Start Jobs window and Job activity windows indicate "Executing" until the end of the job and finish with "success" or "failure"
But on the UA server, second after I start a job, Start Jobs window comes up with "success" or failure" and Job activity monitor says "idle" but Job continues to log without any error message and updates the tables. So these two windows are not reliable at all. I have to add that I have only job operator rights on the UA server.
Does anybody know what the reason is ?
Thanks
View 5 Replies
View Related
Jun 17, 2015
For reasons beyond the scope of my question, is there a way to run this command within a Stored Procedure from a low privileged user login? I can grant the entity "db_ddladmin" privilege and the proc runs, but I'd rather not give out that level of permission to what is basically a glorified web access login.
View 5 Replies
View Related
May 23, 2008
All -
I am using SQL Server 2005 and I have an endpoint that exposes some stored procedures as web-methods in the endpoint.
One particular stored procedure I have exposed takes a long time to execute: about 10 - 15 minutes. While, it is OK, that this stored procedure takes this long, it is not desirable for the HTTP Request that executed this proc to not wait for that long.
What I want to be able to do is to call the stored procedure and have the call return immidetaly but the stored proc continues what its doing. I will call another stored proc at a later time to retrive the result of the first stored proc. The first proc will store its results in a temp table. I am thinking of using SQL Server Service Broker to achieve this.
Is there a better a way to achieve this? And how does SQL Server process the Service Broker requests, i.e., I dont want the query to be executed when the server is busy. Are there any hints that I need to give to Service Broker to be able to do this?
Thanks.
View 5 Replies
View Related
Sep 12, 2006
I'm running mssql 2005. And any stored procedure I create in the master database gets created as system procedures since recently. I have created procs in the master database as user procs previously. As sp_MS_upd_sysobj_category is not supported in mssql 2005, does anyone know why this is happening.. or how I can rectify it??
Thanks
View 7 Replies
View Related
Aug 9, 2005
Dear all,After reading the Book Online, I am still confued by when to use store proc or user-defined function. The most obvious different for me is that 1. UDF can return a table eg select * from dbo.UDF(a, b , c) In real word application, what factor should i consider?Also, any debug tools in sql server ?Ad_dee
View 3 Replies
View Related
Dec 7, 2004
Hello SQL Server programming gurus:
I am trying to create a trigger that fires after a user logon and logoff and does the following:
creates a new user
deletes data from old temp table
Then I need to create a stored procedure that executes dynamically to
drop old users
remove the old user account access
We are running SQL Server 2000.
Since I am new to T-SQL programming could anyone help point me in the right direction? Can I write dynamic SQL in a trigger to do these things?
View 1 Replies
View Related
