I just found out that one of my user database was missen from the sysdatabases entries. The database was missen from the EM and I queried the sysdatabases table but found nothing. The data and log files are intact in the hard drive directory.
Is this a bug or what?
I have a webpage that should display the database names from the master.sysdatabases in a dropdownlist. The code for the stored procedure works fine in Query Analyzer and returns the list of all database names under that instance of SQL-Server 2000. The code: select name from master.dbo.sysdatabases order by 1doesn't return the sysdatabase names to the ASP.NET webpage when executing the stored procedure. It returns: System.Data.DataRowViewWhy does it do this and how can I fix it?Tx
If I wanted to search for Jobs as a particular status (e.g. 0130) and wanted to keep the jobs at this status until it has reached 0500, 0125, or 0900 in it's subsequent status log entry, how can I write the SQL for it to achieve it?
I have the following SQL which searches for the Jobs at 0130, but don't know how to develop it further to search on the requirement above.
------ SQL ------- SELECT job.job_number, (SELECT MAX(jsl.job_log_number) FROM job_status_log jsl WHERE job.job_number = jsl.job_number AND jsl.status_code = '0130') as Last_Early_Warning_Status_Entry
[code].....
In the job_status_log table above, there is a job_log_number field which increments by 1 when there is a new status log entry.
Hi all.. I've been scouring the forums for about 6 hours to no avail. This is a really simple question. I'm trying to have a registration page that lets the user input name, email, desired username, and password. I want to check the username and email fields to make sure ppl cannot sign up twice. So from what I've gathered I have a couple of options:
1) i can set up a unique constraint on the database columns, 2) i can run a select statement before inserting, 3) i can store the whole database column in a variable then search through it.
My question is how to do option 2? All of my transactions are through a sqldatasource object in c#.
Is there a way to link an Access 97 database to a SQL database which would get updated as changes in the Access 97 database take place? In fact, the SQL database will be just a copy of an Access database. If there were changes made to the fields in the Access database these changes should be made to the entries in the SQL database as well.
The log for our SQL 2000 database shows constant "starting up database dbname" entires. Is there a option that causes the databases to constantly be starting or is this a new feature of SQL 2000.
I have a report that accepts a list in the filter and searches the data base for the items in the list. How do I get the result to include all items in the list even if they are not located in the database? Thanks.
How can I delete duplicate entries from tables in my database using Query Analyzer, as there are many duplicate entries in my tables, I want to delete them.
Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
Hi, I'm new to SQL Express 2005. I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue. I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....". Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively. My connection string is: "Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I'm sorry if this is simple, I'm no DBA but have been tasked with solving this problem...
We have a website that connects via ODBC to SQL Server (2k sp1) and at the moment I am getting back about every other time:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open user default database. Login failed.
So this is NOT happening every single time. Now I have seen Microsoft KB - 307864 and I can see that none of the databases are marked as suspect, the database I am trying to connect to does exist and is attached and, I have run the command to switch the database to multi-user mode.
The probable cause of this problem is that a while ago we had a hard-drive failure and I was forced to reattach some old datafiles (mdf,ldf) as the database. This seemed ok and I can view data etc in enterprise manager no problem.
I have checked for orphaned users and the user I am logging in with from the webpage is not listed.
So does anyone have a clue as to why this is happening, and more frustratingly for me, why is it only happening some of the time.
I am using SharePoint Services 3.0 (SP1) with default configuration options, which installs the Microsoft##SSEE instance of SQL to my local C: drive.
While attempting to relocate the files to another drive, I set one of the databases (as recommended) to Single User by using the SQL Server Management Express tool.
I cannot now reset that database to Multi User, even by executing the query
We have a new production server with SQLserver 2005. Our department responsible ofr the installation made it as secure as possible, however. I have to put a new backup on to the server from the old production server. We ran into a problem when we removed the old database. I could not longer logon to the server with an authenticated user.
"A connection was successfully established with the server, but an error occured during the login process" "Shared memory provider : error 0 : No process is on the other end of the pipe"
Strange thing is when i create a new database with the same name. The user can logon to the server again.
i'm using the Enterpirse library logger to write logs into a database. When choosing connection string i choose the database i want in the "connection properties" dialog box and push 'Test connection' button. everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things, from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore.... it only work when i restart the computer.
I try to add a db_role or a user to all my databases with one script. Although parsing doesn't report any problem I get a Syntax error during execution. I first select the database names into a #temp table which has two columns, ID and dbname. After that I use the following code:
I inherited a screwed up Database and I have to straighten out the pemissions and owners. There were several tables listed with an owner of DSSADMIN. However when I logged into Query Analyzer as DSSADMIN, I could not query the DSSADMIN owned tables unless I prefaced the table with DSSADMIN as the owner (ex: DSSADMIN.table).
At the recommendation of our Developer we restored the database from tape thinking that this would reset the proper permissions and table owners. After the restore a user called BCUSER had ownership of the previously mentioned tables (that DSSADMIN owned before the restore); however when I open the Users list, BCUSER is not listed as a user.
If I try to add BCUSER to the database I get an error stating that the USER or ROLE BCUSER already exist in this database. There is a role called DSS listed for this Database that BCUSER was listed a member of. I removed BCUSER from the DSS role and yet I still am not able to add BCUSER as a user for this database. (Yet, as I stated earlier BCUSER is now the owner of the tables the DSSADMIN was the owner of before the restore)
BCUSER is a user in the other databases on this SQL Server.
Does anyone out there understand this problem and/ or can suggestion some possible solutions?
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database) Help pleaseee
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
While attempting to set up sql replication in MSSQL 2005 one of my user databases is now in the systems database folder. I need to move it back to the user databases folder. Any help would be greatly appreciated.
I've been assigned the task of setting up access to our SQL Server 2005 box. A consultant developing for us has accessing to 2 databases and I've set this up fine. It appears however that one of these databases is re-copied over to the server every night to keep data reasonably current.
I'm not interesting in changing this method as I'm not the maintainer (as yet).
Basically I would like to know if I've setup access to this database (it works fine), when the database is updated (with an SSIS package) the account seems to get deleted. Do the original permissions from the source database overwrite those of its destination?
I want a database user to be able to alter login, database user and database role from my application. so, i assigned that user to sccurityadmin server role, db_accessadmin and db_securityadmin database roles....By now, the user can add or remove login and database user. However, the user cannot add or remove any database role membership. What am I missing here?? What should I do so that the user can create, and alter database roles in the database??
) ================================================= In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code: --Form_Kimmel.vb-- Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
End Class ==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
How to maintain Database User Permissions when copying the Database from One SQL Server to another(Either through backups or sp_detach). The reason is the login sid is different in the target server and as a result the database user is not able to map to the login existing in the target server. The only way I can correct this is through dropping and recreating the user's again and assign the permissions, or change the system catalog - sysusers to remap the login to the user in the database. I do not wish to use the sp_addalias as it is available only for backward compatibility. Is there a better way of doing this ?
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
Good day! I'm trying to implement my own MemebershipProvider.
Problem is, that different users should be different database users. Not each user. Any idea, how to solve this? Because only way how to use some database user I know it is to change connection string...