I am a Windows admin who knows how to administer SQL server, but I don't
have any experience in creating a data interface so that regular users, who
don't know anything about SQL commands, can manipulate the data.
Any good books or suggestions? Basically I want to be able to create
something possibly by users using a web browser. I have some Perl scripting
experience if that helps.
Thanks,
CJ
Does anyone know how you can write a script in DTS to ask the user for data through a prompt e.g. a date range?
View 7 Replies View RelatedHi folks
I have a complex tree control, which should allow a 'power' user to modify/add/delete information to a database. To simplify coding, I want to make any changes immediately, but within a transaction.
For example:
Begin transaction
Do some changes
Commit transaction
The idea is, at the end of the edit session, the 'power' user then clicks Save or Cancel. I can then commit or rollback as necessary. Sounds easy!
Whilst this is going on, I want other users to be able to read the same tables that are potentially being updated.
I find that the updates are written immediately to the database - rather than being stored in a temporary area. Hence, other users see these changes directly.
I also find that other users cannot always read the tables, as they are locked out pending the updates from the 'power' user. (This works for the first 4 or 5 reads, and then fails intermittently.)
I know this functionality works in Oracle, but the SQL Server documentation suggests this is simply not a supported function.
Any ideas/comments would be appreciated.
Thanks - Jen
I've been playing around with building custom components for SSIS. I've been doing workflow for years (using Java and Oracle). The company I worked for had a framework for publishing data that allowed for user interaction. That's something I'd love to be able to do in SSIS.
Is it possible to create a custom task that interacts with the user at runtime? So, the user starts the SSIS package. At some point, the process pops up a dialog (Windows Form) that asks the user to set a date using a calendar control.
Any thoughts?
Hi there,
I've just started learning SQL - I already know a bit of VB/VBA and my aim is to become a software developer using both SQL and VB.
One question I have is how would the average programmer go about managing the database? Are SQL commands (queries/add record/make table etc) normally programmed and controlled in VB itself via the docommand.runSQL on the event triggers or are they managed from the SQL Server application themselves? Also, if there are any other comments on how VB works with SQL I'd be very interested to hear them.
My assumption is that the database commands are managed from VB and any automated download/import or export of data into or from the SQL database is scheduled from SQL server itself.
Many thanks for your time in reading.
Is there a way to cause the selection of one parameter to change the value of another parameter? I know I can set defaults but I want to be able to have the selection of one parameter force a change on another.
I have two parameters, one for fiscal year and one for calendar year. When I select a calendar year I want the fiscal year to be set to 'all' and vice versa.
Thanks.
hi all,
this is my question:
can a stored procedure interact with a FTP-server that has nothing to do with the database the stored procedure is running from??
I want my stored procedure to delete records in my database AND my FTP-server in the same time..., so also uploaded files which have been uploaded to a FTP-server during the same session when data has been written to my database...???
this is my SP for deleting records in my database:
...
DELETE FROM dbo.tblUploadsIntern WHERE DATEDIFF(dd,GETDATE(), tblUploadsIntern.uplZipfileDateTimeOffline) > 7
END
GO
the code for deleting files on FTP-server works also...
thanks in advance...
Hi everyone,
I have a question related to data flow task's block. Lets say i have a problem to solve that consist of 5 major transformation steps and each transformation step ends with a Result set, this result set of Step1 is required by Step2 and the Result set of step2 is required by 3 ....
now i can solve the the problem inside a single "data flow task" block but this is not my aim, since this is not clean aproach specially if the calculation and transformation requires a lof of task so since i would like to solve the problem in differnt block depending on the complexity and logic of the problem.
My Question is how can I pass Result set of a "data flow task" block from step a to the "data flow task" Block of Step B in the Controll flow view(tab) , i tried connecting both blocks as in the dataflow view(tab) by my connections does not show any metadata informations which mean the do not contains any afaik.
thanks in Advance
e. Yassine
Hi all,
I would be very glad if someone can suggest me what techniques I should use in the following scenario:
I have 2 SQL Server databases : DB1 and DB2. DB 1 is on a remote server (hosting server) and DB 2 is on a local server.
Some tables of each db contain tables that are polulated and changed by the appropriate application, i.e.:
DB1.users, DB1.orders,... etc are managed by "webapplication"
DB1.products ... are not managed by "webapplication" : in fact only used to read from
DB2.products, DB2.customers, .... etc are managed by "winapplication"
DB2.orders,....are partially managed by "winapplication"
Since the amount of data can go over 100000 records i'm wondering what would by the best approach to :
- synchronize the data of DB1.products and DB2.products in DB1 on remote server (updated newly added rows and update changed rows,....)
- the products data is only (at the moment) added, edited and deleted on the local server
I think SQLBulkCopy will not do the job. Should it be possible with some query? Or...?
Any suggestions are appreciated!!
O.
Hi,I am new to SQL. Please bear with me and allow me to ask a dumbquestion.I am debugging a stored procedure (written in Trans-SQL), and I foundthat the SQL analyzer that I use doesn't have a debugger. All I cando it is execute a block of code and see what is going on in aninteraction seesion of the SQL analyzer. I would need to declare somevariable to hold values of the previous query in the interactivesession.I understand that this can be easily done in a stored procedure viathe Declare command (e.g., Delcare @order_no int). Is similarfunctionality exists in an interaction session of the SQL analyzer?If so, what is the command. Please advise.Thank you very much for the help.Alex
View 1 Replies View Related
Hi
I am running into issues with custom objects interaction with visual studio 2005.
1. Custom connection manager.
I am setting the name of the connection manager ( to standardize naming convention ) that user created, however when the CM is created, the name displayed in visual studio is still the default name even if the real name is the one i set. I have to do things like, edit it or save package - close - reopen, create another connection, ... etc in order to get it refreshed.
2. Custom Task
I am managing some variables in this custom task so that I will be adding and deleting variables in the package.
The challenge i am running into is, when I added 2 variables for example, even though the variables are successfully added to package, the Variable Window in visual studio designer will not reflect the new variables. I have to save package, close, and re-open in order for the variables to show up.
So this brings to my question - is there any way to tell Visual Studio programmatically to refresh the contents of these 2 sections, 1 is the Variable Window and the other is the panel containing the list of connection managers.
I have been searching around and found some clue about visual studio SDK but I still cannot find an exact way of doing it. Visual Studio SDK example tells you how you can access the Variable window as
framesList = new List<IVsWindowFrame>();
toolWindowNames = new List<string>();
// Get the UI Shell service
IVsUIShell uiShell = (IVsUIShell)Microsoft.VisualStudio.Shell.Package.GetGlobalService(typeof(SVsUIShell));
// Get the tool windows enumerator
IEnumWindowFrames windowEnumerator;
ErrorHandler.ThrowOnFailure(uiShell.GetToolWindowEnum(out windowEnumerator));
IVsWindowFrame[] frame = new IVsWindowFrame[1];
uint fetched = 0;
int hr = VsConstants.S_OK;
// Note that we get S_FALSE when there is no more item, so only loop while we are getting S_OK
while (hr == VsConstants.S_OK)
{
// For each tool window, add it to the list
hr = windowEnumerator.Next(1, frame, out fetched);
ErrorHandler.ThrowOnFailure(hr);
if (fetched == 1)
{
// We successfully retrieved a window frame, update our lists
string caption = (string)GetProperty(frame[0], (int)__VSFPROPID.VSFPROPID_Caption);
toolWindowNames.Add(caption);
framesList.Add(frame[0]);
}
}
But i looked up the methods for IVsWindowFrame and it does not have anything to refresh the contents of the frame.
I thought about firing events but cannot find which one to fire.
Any help on this will be greatly appreciated.
Terry
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
Any thoughts would be much appreciated
aero1
/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)
GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN
INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted
END
/************************************************
3) - Do the insert
************************************************/
DECLARE @my_insert TABLE( my_table_id bigint )
declare @forename VARCHAR(100)
declare @surname VARCHAR(50)
set @forename = N'john'
set @surname = N'smith'
INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)
select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************
4) - Drop the trigger
************************************************/
drop trigger [dbo].[trig_my_table__instead_insert]
go
/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
Hi,
Please give the T-SQL script for this ? Thanks
Shanth
When I am in Visual Studio 2005, and I try to add an SQL database, I get the following error "generating user instances in sql server is disabled. use sp_configure user instances enabled to generate user instances." I am currently using SQL server 2005 Express. What do I need to do, to create an SQL database? Thanks in advance.
View 4 Replies View Related
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
I would like to know if there is a way to find out who changed a users roles/access WITHOUT using the audit function. For example, if a user account was created and given SA access then changed to read only, how can I find out who made that change? I tried searching for an answer, but kept getting no results. I'm thinking this may tie into the sys.sysusers view?
View 3 Replies View Related Hi,
I have several reports for users to view on our Intranet. After installation of SQL 2005 SP2 patch, I cannot delete user or user's authority from Report in Properties Tab. An error message was shown on the status bar. It indicated that JavaScript Error: 'Return' statement outside of function. Seems something wrong with the 'Delete' funciton in SQL 2005 after update. The other functions worked fine. Could you point me out how to fix it or need to install any updates / hotfix. Thanks a lot!
Regards,
Kenneth Lai
Programmer
Error Pic
Message Box
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
Hi,
I have a copy of VS2005 and i have installed the Microsoft SQL Server Developer Edition
I am trying to do my first connection using ASP.net (yay for me...) and it has failed...with this error..Login failed for user 'testuser'. The user is not associated with a trusted SQL Server connection.
can someone please point out why? yes i know that the error seems pretty straight forward but how do i fix it? like how do i make the user a trusted server connection? where do i do it? and what are the steps? the user is an administrator and by rights should have all access to everything....
connection string
SqlConnection MySQLConnection; MySQLConnection = new SqlConnection("server=cmptrname\databsename;uid=testuser;password=password;database=mytest");
btw while your reading do you have any examples of opening a db with the connection string in the web.config file? because i get some error "connection string has not been initialised" using the
system.Configuration.ConfigurationManager.AppSettings.Get
i though i would stick to the top code first before i tackled the web config error first....
Thanks heaps
I need help. The security principal is the correct DomainUser, but the error message says I am not authenticated.
So here is my error Message:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Me.User.Identity.Name=CompanyDomainRyan; System.Security.Principal.WindowsIdentity.GetCurrent=CompanyDomainRyan; HttpContext.Current.User.Identity.Name=CompanyRyan
Generated by:
Dim secPrinc As System.Security.Principal.WindowsIdentity = System.Security.Principal.WindowsIdentity.GetCurrent
Me.lblError.Text = ex.Message & vbCrLf & vbCrLf & "Me.User.Identity.Name=" & Me.User.Identity.Name & "; System.Security.Principal.WindowsIdentity.GetCurrent=" & secPrinc.Name & "; HttpContext.Current.User.Identity.Name=" & HttpContext.Current.User.Identity.Name
Here is the Connection String:
Private ConnString As String = "Server=10.144.162.111;Database=DNS;Trusted_Connection=True"
IIS has 4 websites hosted on it. The parent level allows anonymous with windows auth off, but the website level has anonymous off with widnows auth and digest.
In IIS, is there a problem with having the parent level anonymous and website level windows auth?
All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode. I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
Server Error in '/SendItNow' Application.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:
Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb Line: 43 Stack Trace:
[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Hi all,
I am new in asp.net. In my web.config file, I wrote the connection strings as below and then I got the above error. I already changed SQL server Authentication mode to "SQL server and Windows". Any idea? Thanks in advance.
<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Data Source=xxx;Initial Catalog=mydb;User ID=test;Password=test;Persist Security Info=False;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Our server has integrated security setup, upon startup of the server,
we have a continuous flow of error msg:
Login Failed: Reason: User '_' not defined as a valid user of trusted
connection.
The timing of these messages only around 30 seconds apart
The only incident from Technet I can find is Q186314, but we don't have replication setup, anyone knows where I can look into ?
I recycle the server but didn't help.
I appreciate any help I can get ..
Thanks.
I am relatively new to sql developer. There is a new user that just joined our organization. I am trying to grant him the same direct grants privilege to the tables that an existing user has. The existing user has a ton of direct table access privileges and it will take days if I had to do each grant one by one like: grant select,insert,delete,update on 'table name' to 'user id'. Is there a way of copying or inserting an existing user's privilege and granting it to a new user.
View 2 Replies View RelatedI have an SSIS package built by another developer, and now that I'm running it under my login the passwords won't save. The solution and packages are setup with ProtectionLevel EncryptSensitiveWithUserKey, but how do I get the User Key to reset so I can now save passwords? I can re-enter them, but whenever I enter hte password and test it then click OK it still has the red arrow next to the connection as if there's an error. I can create new connections and those passwords save fine, but with 40-50 items in this package I hate the thought of having to go into each and change the connection.
I tried changing the package and solution to DontSaveSensitive then rebuilding and closing then reopening, I hoped there was some option to reset the User Key just as if I created the solution. If this option doesn't exist why?
I'm using the RTM version of Visual Studion 2008 and SQLServer Express.
Logged in as an administrator, I can create a connection to an mdf file and all is well.
As a normal user, attempting to create a connection gives the message "sqlservr.exe has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have tried this with UAC turned on and turned off. The result is the same. In Services I can see that SQLEXPRESS is running, but each time I try to connect, I get the "stopped working" message.
For existing database programs that have the .mdf file stored in the project folder, I can run the program in the VS IDE on my XP machine and on my Vista machine as administrator, but not as a normal user.
I'm not looking for a workaround to make this work once, but the cause and solution to the problem. This is for an introductory VB textbook and we must be able to move a database program from one machine to another and make it work. Everything I have read says that SQLExpress should be able to do that.
Can anyone help me with this?
Judy Fraser
I cant find a reason why its doing this
Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.
Hello,
I am trying to migrate reporting services from SQL server 2000 to SQL 2005. I followed the migration steps listed in one of the TechNet documents. Installed SQL 2005 and SP2.
Backed up existing SQL 2000 databases and restored on SQL 2005.
Went to Configuration tool and then to the Database setup. Connected to SQL 2005.
Clicked on the Upgrade button. The upgrade fails and I always get the following errors:
"The database version (C.0.6.54) does not match your reporting services installation. You must upgrade your Reporting services database"
Then I get this exception:
System.Data.SqlClient.SqlException: Cannot find the user 'RSExecRole', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
I do not understand why it is looking for user 'RSExecRole', which is a role.
Appreciate your help
I cant find a reason why its doing this
Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.
My goal is to write a DR plan where i am restoring all user databases onto a diffrent server in a event of hardware failure. I was trying to figure out a way to extract DDL of user accounts and their permissions on all user databases so i can simplify my DR documentation.
This is the plan I came up with...to restore all system and user dbs on a different Physical SQLServer.
1. build named instance $PROD
2. restore master database
- startup sqlserver in single user mode -m or DAC sqlcmd -S ServerName -U sa -P<xxx> –A
net stop MSSQLSERVER$PROD
net start MSSQLSERVER$PROD -m
- restore database master from disk e:master.bak with replace;
3. start sqlserver normally
4. stop SQLServer agent
5. restore msdb
-restore database msdb disk e:msdb.bak with replace;
6. restart SQLServer
7. Restore User Databases.
8. Run Sp_change_users_login for all users
-Sp_Change_users_logins 'auto_fix','username'
Hi all,
I was wondering whether there is a way to show the user an error when the user did not select a specific parameter.
In my case, I have two optional parameters. The user has to select either one to view the report. If the user does not select either one, I would like to show some sort of an error page indicating so. However, all i am getting is a complete blank with no report in sight. I as a developer know this is an error as a result of missing parameters, but i was wondering whether I could produce a page or direct it to a page so that the user doesn't go all horrified at an empty page ?
Thanks
Bernard