Hi,
I have been trying to figure out how to use ALTER TABLE/ COLUMN to modify a column from an IDENTITY column to one which is not an IDENTITY column.
I would like to do this so that I could add another column (using ALTER) and set it as the IDENTITY column.
Any thoughts?
Your help is much appreciated,
-Scott
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I'm attempting to alter a database by removing one of two log files. I have truncated both log files successfully and the database has no processes but I get an error stating file cannot be removed because it is not empty. Help
View 2 Replies View RelatedHi all, I am trying to do a very basic ALTER Command and am trying to change its DEFAULT value. Code below is what I currently have:
Code Snippet
ALTER TABLE Table_1
ALTER COLUMN TEST VARCHAR(1000) NULL DEFAULT 2
Thanks, Onam.
*UPDATE* I found this code but are there alternative methods? Additionally, if I was to update its DEFAULT value again how would I go about doing that? Do I first have to remove the CONSTRAINT and then run the command?
Code Snippet
ALTER TABLE Table_1 ADD CONSTRAINT DF_Albumns_Comment DEFAULT 2 FOR TEST
i am altering an int column to identity:
where is something wrong here?
error:
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'IDENTITY'.
statement:
ALTER TABLE Navigation Alter column [Navigation_ID] int IDENTITY(1,1)
I am not able to create identity on a existing column using ALTER statement.
Can anybody help on this issue ?
I'm attempting to remove the IDENTITY property from a column using the ALTER command but can't seem to find the right syntax. I've tried every conceivable combination I can think of. I can add the property to a column that doesn't have it.
It's easy to do in Enterprise Mgr., but I want to script the change.
I really don't want to drop the table and rebuild if I don't have to.
Sidney Ives
HELLO All,
Does anybody knows how to set identity to column using ALTER Script.
Thanks in advance.
--kneel
Hello All,
There is a table A in SQL. One of the column of A was IDENTITY before and was getting referenced in other table B.
During migration to SQL 2005, I removed the IDENTITY constraint and imported all the data from 2000 to 2005. Now I have to deploy the IDENTITY back to the column. I am getting an error while executing the code:
ALTER TABLE TableA
ALTER COLUMN ColumnA
ADD CONSTRAINT IDENTITY(445,1)
Can anyone tell me where I am going wrong? Or if there is any other way to do it. There are 50+ tables I need to do the same.
Thanks,
-S
hello experts,
Any body know what is the query for modifying the identity column in a table? i mean modifying from IDENTITY column to int colum or VICE-VERSA
Thanks
Muthu
I tried
Alter table table1 alter column column1 Identity(1,1);
Alter table table1 ADD CONSTRAINT column1_def Identity(1,1) FOR column1
they all can not work,
any idea about this? thanks
Hi all,
Is there a way to remove the identity from a column
by using alter table???
thanx
Hi I have a problem. I have a replicated database. Now I have a couple of tables within the database where I delete the content row by row and caluted the new record and insert them. Now when I do this on the development system that is unreplicate it is fine. However on production that is replicated I get this error:
System.Web.HttpUnhandledException: Exception of type System.Web.HttpUnhandledException was thrown. ---> System.Data.SqlClient.SqlException: INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
Now I persume this is caused by the foreign key being contrained by the replicated database. I had though about unticking the box 'Enforce Relationship for replication' but I am not sure what problems this may cause.
Woudl this fix my problem? If not do you have any idea what would.
Thanks Ed
Is there any way to remove the IDENTITY property of a column? I originally used it, but it caused so many headaches with ADO.NET that I've decided to just increment the darn things manually. So I want to turn it into just a normal integer column.
If there's no direct way, can someone suggest a quick way to create a new column, copy all the old values into the new column, change the primary key to the new column, and drop the old column?
Thanks.
suppose my table is
create table TEST (
id NUMERIC(10,0) IDENTITY(1,1) NOT NULL)
I want to remove IDENTITY(1,1) from id without dropping table
How can I alter a table turning ON or OFF an IDENTITY field ?
for example:
if I had my DB with Client_ID as an I IDENTITY field and for some reason it has
changed to just INT (with no IDENTITY) - how can I tell it to be IDENTITY field again ?
+
Does anyone knows an article on database planning ?
(I wanna know when should I use the IDENTITY field)
trying to change a column that is just a INT NOT NULL column, to have an auto-increment.
Code:
ALTER TABLE [ImpExpTables].[dbo].[ImpExp_eBayLocalNeedsDeleted]
ALTER COLUMN ID int IDENTITY(1,1) NOT NULL
just gives error at IDENTITY
Pls help me
i want to alter table and add identinty constraint on one column
create table play8(id int)
" alter table play8
alter column id int identity(1,1) " GIVES ERROR or it is posibble
Yaman
i need to alter all foreign keys in my database and uncheck the"Enforce relationship for replication" check box. Using the EM, Iextracted the code snippet below. unfortunately, when i run this testfrom query analyzer, then go back into the EM, the box is stillchecked.can anyone tell me what i am missing? any advice on unsetting thisattribute globally would be appreciated!BEGIN TRANSACTIONSET QUOTED_IDENTIFIER ONSET TRANSACTION ISOLATION LEVEL SERIALIZABLESET ARITHABORT ONSET NUMERIC_ROUNDABORT OFFSET CONCAT_NULL_YIELDS_NULL ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONCOMMITBEGIN TRANSACTIONALTER TABLE dbo.CustomerCustomerDemoDROP CONSTRAINT FK_CustomerCustomerDemo_CustomersGOCOMMITBEGIN TRANSACTIONALTER TABLE dbo.CustomerCustomerDemo WITH NOCHECK ADD CONSTRAINTFK_CustomerCustomerDemo_Customers FOREIGN KEY(CustomerID) REFERENCES dbo.Customers(CustomerID) NOT FOR REPLICATIONGOCOMMITthanks!!
View 4 Replies View RelatedI am having problem when performing the alter table switch. Both tables are identical and have pk.
ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresults' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part' .
CONSTRAINT [PKIDX_testSummary] PRIMARY KEY CLUSTERED
( [testresult_id] ASC )
WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
ON TResultsScheme (testresult_id) ) ON TResultsScheme (testresult_id)
I have performed the function on other tables successfully, but this is the first that has an identity column involved. Is there anything special that needs to be done?
[testresult_id] [int] IDENTITY(1,1) NOT NULL,
Is there any way to remove IDENTITY property on particular table? I tried removing IDENTITY property using Manangement studio, but this operation behind the scene use migration concept that is by creating tmp table and then populating with data; droping the orginal and renaming the tmp back to original.
Second, i want some kind of generic solution using certain system table like aya.sysobjects, sys.identitycolumn etc such a way that i should be able to remove the idenity property from all of the table accross a database.
Mandip
when i alter non identity column to identity column using this Query alter table testid alter column test int identity(1,1) then i got this error message Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'identity'.
View 2 Replies View RelatedI'm trying to write a small script that sets the identity on 7 tables that don't have an identity set yet. Can someone advise on the syntax?
View 7 Replies View RelatedI want to crete temporary table with this coammnd "CREATE TABLE Temp (ID int, name varchar(50))". I would like to know which command is used for setting primary key and identity on ID field. Thankyou in advance.
View 2 Replies View RelatedHello,
I am relativley new to SQL and have a question about identity fields.
I am creating a script to run everynight to insert records into a support table in a database. one of the fields is a identity field that is updated everytime a record is added locally or over the web.
Some records that are added into the database locally by users do not get added into theis support table, but so those new people entered in can use the website a entry must be added to this support table.
I am working on a script to take the records that where added by users and automatically put them in every night using a basic schedueled job.
The identy number is updated everynight in a table that collects all the important identiy numbers. I would like to use this table to alter the seed value and then increment by one every time a new record is added. This is my only sticking point so far.
Any help would be greatly appreciated.
Kenn Brown
Hi All;
I am trying to set up Merge Replication on a database and want to set the IdentityRange Management to Auto for all my tables which use a Identity column.
In the wizard, on Article Properties Page, I can do this by selecting a Table, and going for its properties, but this is a tedious task as I have ~300 tables to set this property on.
Is there another way or a global location where I can set the property to true and even mention the ranges and the threshold, so that I dont have to pick each table and set it individually.
I am also aware of the fact that I can Generate a Script and modify it and run that, but I was looking for some way to do this in the wizard.
Thanks!
I have created a table as below mentioned. Then I want to alter the ID column as identity(1,1) without dropping the table as well as losing the data.
create table dbo.IdentityTest
(
id int not null,
descript varchar(255) null,
T_date datetime not null
)
i have a table
table1
column1 int not null
column2 char not nul
column3 char
i want to script a change for table1 to alter column1 to be the table identity column. not primary.
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedHi all,
I tried to remove AdventureWorksDB in the "Add or Remove Programs" of Contol Panel and I got the following errors: (1) AdventureWorksDB Error 1326: Error getting file security: CProgram FilesMicrosoft SQL ServerMSSQL1MSSQLGetLastError: 5. |OK| and (2) Add or Remove Programs Fatal Error during installation (after I clicked the |OK| button). Please help and tell me how I can solve this problem.
Thanks in advance,
Scott Chang
I have uninstalled the CTP version of the SQL Server express so that I can install the released version but CTP version is still listed in the add/remove program list but without the change/remove button. I have been to different sites to find information on cleaning this up and I have ran all the uninstall tool I can find but the problem still prevails. I cannot install the released version without completely getting rid of the CTP version. Please help anyone.
Thanks
deebeez1
I need help,
I am having a hard time removing my SQL instance inside the Add/Remove program. After i select the SQL Instance name and then I tried to remove it but it won't allow me to delete it. There isn't any error message or whatsoever. Actually, when i try to log it in my SQL Management studio, that certain sql instance name is not existing according to the message box. Is there any way to remove the Sql Instance in my system?
I appreciate your help, Thanks
IS Support
I would like to add an Identity to an existing column in a table using astored procedure then add records to the table and then remove the identityafter the records have been added or something similar.here is a rough idea of what the stored procedure should do. (I do not knowthe syntax to accomplish this can anyone help or explain this?Thanks much,CBLCREATE proc dbo.pts_ImportJobsas/* add identity to [BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] IDENTITY(1, 1) NOT NULL/* add records from text file here *//* remove identity from BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] NOT NULLreturnGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOhere is the original tableCREATE TABLE [ItemTest] ([BarCode Part#] [int] NOT NULL ,[File Number] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_File Number] DEFAULT (''),[Item Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Item Number] DEFAULT (''),[Description] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Description] DEFAULT (''),[Room Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Room Number] DEFAULT (''),[Quantity] [int] NULL CONSTRAINT [DF_ItemTest_Quantity] DEFAULT (0),[Label Printed Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Label Printed Cnt]DEFAULT (0),[Rework] [bit] NULL CONSTRAINT [DF_ItemTest_Rework] DEFAULT (0),[Rework Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Rework Cnt] DEFAULT (0),[Assembly Scan Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Assembly Scan Cnt]DEFAULT (0),[BarCode Crate#] [int] NULL CONSTRAINT [DF_ItemTest_BarCode Crate#] DEFAULT(0),[Assembly Group#] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Group#] DEFAULT (''),[Assembly Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Name] DEFAULT (''),[Import Date] [datetime] NULL CONSTRAINT [DF_ItemTest_Import Date] DEFAULT(getdate()),CONSTRAINT [IX_ItemTest] UNIQUE NONCLUSTERED([BarCode Part#]) ON [PRIMARY]) ON [PRIMARY]GO
View 2 Replies View Related