Using ASP.NET Session State In SQL 2005 With A Mirror
Jun 22, 2006
I have SQL 2005 mmirroring sucessfully working in an ASP.NET 2.0 web application. I also have session state being maintained in SQL Server using the built-in functionality in ASP.NET. The problem is, even with "allowCustomSqlDatabase=True" and specifying a failover partner in the DSN, it appears that ASP.NET does not work with the failover partner. It always tries to get the session info from the "data source" server specified in the DSN.
Is there a way to get the session state to fail over to the mirrored server without writing a custom session state provider?
View 7 Replies
ADVERTISEMENT
Jan 31, 2008
After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.
The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.
ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'
After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.
The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.
Any idea's why the state between Mirror and Witness Connection remains Disconnected?
Thanks,
View 9 Replies
View Related
Aug 3, 2006
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
View 1 Replies
View Related
Mar 14, 2007
I have an ASP.Net (C# 2.0) application that has been using SQL Server 2005 Standard Edition with Service Pack 1 to hold the session state in a testing environment. Currently, the session state is being stored in TempDB, rather than the ASPState database. This has worked very well for us until yesterday. We installed SQL Server 2005 Service Pack 2, as well as the Critical Update for Service Pack 2 (KB933508). Once the SQL server was rebooted, I got the following error message when I tried to access the web application.
The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The INSERT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
In the web.config file for the application, I have a SQL username and password defined that can access the ASPState database. To correct this issue, I had to give this user db_datareader and db_datawriter access to tempDB.
Has anyone else run across this problem, and is it related to SQL Server 2005 Service Pack 2?
View 1 Replies
View Related
Sep 26, 2007
We have mirroring setup for 5 dbs, 4 of which are synchronized and 1 which is in "synchronizing" state on the principal and "restoring" state on the mirror. Mirroring for all dbs has been working fine for the past several months and we have a witness that has allowed automatic failover in the past without problems.
This database has several bulk inserts performed throughout the day and am sure there is some latency due to the size of these transactions.
Not sure as to why this is happening all of a sudden, but the db in question has been in this state for the past 12 hrs. I checked the mirroring status on the principal and it states that it is "synchronizing: data is being transferred from principal to mirror", but the mirror server states that db is in "restoring" state. Can anyone suggest as to how I can get the database on the mirroring server to get back to "mirror, synchronizing/restoring..." state? Or suggest on how I can troubleshoot this?
Thanks in advance.
View 3 Replies
View Related
Jul 23, 2005
HiCan anyone help me with Session Management in ASP.NET. I have a webapplication with a login page and i need to retain the username afterhe logs in. This is what I have in Config FilesGlobal.asax<OBJECT RUNAT="SERVER" SCOPE="SESSION" ID="MyInfo"PROGID="Scripting.Dictionary"></OBJECT>web.config<configuration><!-- This section stores your SQL configuration as an appsettingcalledconn. You can name this setting anything you would like.--><appSettings><add key="conn"value="server=ADVAITH;database=tis;uid=sa;pwd=;" /></appSettings><!-- This section sets the authentication mode to formsauthenticationand routes all traffic to the specified page. It alsospecifies atimeout. The authorization section below denies all users notauthenticated. For testing purposes, custom errors was turnedoff.The section below allows pages to be trace enabled fordebugging--><system.web><sessionStatemode="InProc"cookieless="false"timeout="20" /><authentication mode="Forms"><forms name="MyFormsAuthentication" loginUrl="login.aspx"protection="All" timeout="720" /></authentication><authorization><deny users="?" /></authorization><customErrors mode="Off" /><trace enabled="true" requestLimit="0" pageOutput="true" /></system.web><system.web></system.web></configuration>When i assign the user name in the log in page it workssession("username") = txtUsername.TextBut if I use a new session variable or the username(session variable asdeclared in the login page, in the menu page it gives me error sayingthat Decralation is expected . Is there any files that i need to importb4 using sessions??Please help me out. My email:bramanujam@gmail.com
View 1 Replies
View Related
Apr 17, 2007
I'm currently storing session state in a sql 2000 server for my vs.net 2002 projects. I'm currently developing a new project using vs.net 2005 and was wondering if I could store the session state in the same sql server. Does anyone know if this is possible? If so can someone point me in to an article or code example. All of the examples I have come across are for sqlExpress.
Thanks in advanceJason
View 1 Replies
View Related
Jul 26, 2004
I am contemplating storing session state data in a SQL server database (created by running the installSqlState.sql script included in the .NET framework installation) and have established a functioning connection to the database but I am constantly getting "access denied". I've found that tweeking the permission settings in SQL for the ASP.NET user is resolving each specific error that arises but was wondering if there is a more "global" resolution? I'm finding myself having to manually check off each individual object and every option or is this what is needed to resolve the "access denied" error?
Thank you.
View 1 Replies
View Related
Nov 21, 2007
Hi guys, right now I am having insufficient hard disc space at the secondary server (Mirror side) due to the large db that I have. Therefore, I get a new HDD on the server (Assuming located at drive G) and would like to shift the current mirroring db to that new drive. Is it possible for me to do that ? Hope able to get any suggestion from here ASAP. Thanks.
Best Regards,
Hans
View 4 Replies
View Related
Mar 31, 2008
Hi,
I need the application not to expire the session always. I need to maintain the session always even if the user keeps the web application idle for long time.
Regards,
Saravanan Gajendran
View 3 Replies
View Related
Feb 19, 2007
we config our SAP system to use SQL Server 2005 database mirror. but the mirror server hang by accident, after restart mirror server,the server return to normal,but the mirror can't be resume.
ALTER DATABASE R3P
SET PARTNER resume
the error is:
Msg 1447, Level 16, State 21, Line 1
ALTER DATABASE "R3P" command cannot be executed until both partner server instances are up, running, and connected. Start the partner and reissue the command.
View 2 Replies
View Related
May 26, 2015
An old website I inherited uses sa to connect to SQL SessionState and had the details in the web.config. This is bad for security.The session state database is of -sstype "t" which is defined as:Temporary. Session state data is stored in the SQL Server tempdb database. Stored procedures for managing session state are installed in the SQL Server ASPState database. Data is not persisted if you restart SQL. This is the default.What kind of WIndows user, SQL Login, role and permissions do I need to create to make Session State secure? (Windows Server 2012 and SQL Server 2012 mixed mode authentication, Webfarm).
View 4 Replies
View Related
Aug 12, 2015
I wonder how do I shrink log file in a specific database which in Mirror/Synchronized/Restoring state..So that database is in Mirror server ( High availability ).
View 4 Replies
View Related
Jun 14, 2015
I am using SQl Server 2012 Database Mirroring with around 40 gb as mdf and 1 gb as ldf. Now my ldf size increased . How to reduce ldf size while mirror enabled with mirror server and witness server. Can shrink the ldf with mirror enables.
View 4 Replies
View Related
Mar 7, 2007
I'm trying to setup a SQL 2005 SP2 Mirror in between two mashines with no witness server.
I have successfully established the following:
1. Backup The Database on Principal Server: OK!
2. Copy the backup over to the mirror server: OK!
3. Restore the Database on Mirror Server: OK!
4. Establish Endpoint on Principal Server: Encyrption Disabled OK! TCP - PORT 5022
4.1 Test Script: Checks fine (values match)
SELECT e.name, e.protocol_desc, e.type_desc, e.role_desc, e.state_desc,
t.port, e.is_encryption_enabled, e.encryption_algorithm_desc,
e.connection_auth_desc
FROM sys.database_mirroring_endpoints e JOIN sys.tcp_endpoints t
ON e.endpoint_id = t.endpoint_id
5. Establish Endpoint on Mirror Server: Encyrption Disabled OK! TCP - PORT 5022
5.1 Test Script: Checks fine (values match) (same script as above)
6. Specify Principal server from Mirror server: OK! Connecting with IP
7. Specify Mirror server from Principal server: OK! Connecting with IP
8. View Mirror Information:
8.1 Test Script: Shows everything in NULL
SELECT mirroring_state_desc, mirroring_partner_name, mirroring_witness_name, mirroring_witness_state_desc, mirroring_role_desc, mirroring_safety_level_desc
FROM sys.database_mirroring
Mirror endpoints are still in red even though they initialized correctly.
Mirror monitor shows no mirrors are up.
SQL Logs shows: The Database Mirroring protocal transport is now listening for connections.
Any help would be appreciated.
View 1 Replies
View Related
Dec 28, 2007
Greetings Team,
please see my post in the previous thread;
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2606008&SiteID=17&mode=1
We are making our final decission of using either transaction log replicant or a database mirror replicant and which solution would provide the biggest ease of provisioning as well as the fastest turn around in recovery.
"Good Morning Team,
I have a client whom has a 2 node SQL 2005 cluster with over 100 databases, their schema design is that they create a new database for every customer that signs to their services.
The problem I am encountering is that for every new database created in the cluster we like to setup a SQL2005 mirror replicant at a remote site for disaster recovery should the cluster ever fail.
i'm looking at the SQL professionals to help me with 2 questions.
#1 Upon creation of a new database in the cluster is there an easily scripted method that could be used to automatically create the mirror replicant, what about if not being aware of the new databases having been created? since we do not know when the customer creates databases or perhaps a SQL job that could be done based on new databases created that would automatically script the procedure of a database mirror.
#2 understanding the procedures required in a mirror replicant from a cluster primary involving, database backup, database restore to mirror replicant, transaction log backup and then transaction log restore with both points of the restore leaving the mirror replicant in NO RECOVERY mode and lastly creating the connection end points.
has anyone encountered such a situation with a database cluster with a mirror replicant consisting of such a wide span of individual smaller databases and would anyone have suggestions on how to make this highly available with a mirror replicant?
i look forward to hearing back, happy holidays."
View 2 Replies
View Related
Nov 20, 2006
Hi Everyone;
I have a SQL Server 2005 DB server (SRV1) and a mirror DB server (SRV2) without witness server. I saw that there is a "Failover" button on Mirror window of SRV1. When click it servers changes roles.
My question is that: If my mirrored DB server crashs and I can not open windows or if I lost all data on SRV1, how can I failover from only mirror DB (SRV2)?
Thanks in advance.
Senol Akbulak
View 6 Replies
View Related
Oct 30, 2006
I am runnning a package which loads 3 million records, if my package fails after loading 1 million records, How do I execute my package in order to load the records from 1 million record? My guess is checkpoints will not help in this case. Do we have any other option to recover the session?
View 5 Replies
View Related
May 7, 2008
Hello,
I hope this is in the right forum, I'm new to MSDN. I'm also not an expert in SQL, so please bear with me as I was unable to find an answer by searching the archives.
We have a single SQL 2005 Standard installation with 30 user CALs on a Server2003R2 box. We have another Server 2003 box in a remote but connected location that we previously used for backup replication. What we'd like to do is use some of the replication features in SQL 2005 to replicate the data over every night to the other box, onto which we would install another copy of SQL 2005. This would not be a server accessed by clients, but simply a "live backup", that in the event of a catastrophic failure, could be manually set up to operate as a SQL server in place of the failed primary server. I don't need any kind of automatic "failover", just the ability to replicate the data over to the other system so I have two SQL Servers that synchronize from one to the other overnight.
I was told that I wouldn't need to buy the user CALs again, that the 30 user cals would translate over if the primary server fails and has to be replaced by the cloned server. But what do I buy for the SQL server itself? A boxed version is a bit pricy and comes with 5 CALs which apparently I wouldn't need. Then I noticed that on softwaremedia.com the open license version, which can be bought a la carte, lists a requirement of buying at least 5 cals or a processor license. What exactly do I need to do this, and how can I get it for the least amount of further spending?
Thanks!
View 3 Replies
View Related
Jun 28, 2006
Hello All,
I've tried to replicated exactly what it says in the online documentation. At the end of the post are the SQL statements issued.
1. Enable encrypted outbound connections on the primary server
2. Enable encrypted outbound connections on the mirror server
3. Enable encrypted outbound connections on the witness server
4. Enable encrypted inbound connections on the primary server
5. Enable encrypted inbound connections on the mirror server
6. Enable encrypted inbound connections on the witness server
7. Set mirror''s partner to the primary
8. Set primary''s partner the mirror
9. Set principal€™s witness.
Every step run''s normally,but why can''t auto failover.
I used the following Script:
/* -------- 1. ENABLE OUTBOUND CONNECTIONS ON THE PRIMARY -------- */
use master;
go
DROP USER PrincipalLogin1
DROP LOGIN PrincipalLogin1
DROP USER PrincipalLogin2
DROP LOGIN PrincipalLogin2
GO
Create login PrincipalLogin1
with password='PrincipalLogin'
go
Create user PrincipalLogin1
from login PrincipalLogin1
go
Grant connect on endpoint::Principal_Endpoint_Mirroring to PrincipalLogin1
go
---stop
create certificate MirrorCertForPartnerPub
authorization PrincipalLogin1
from file = 'd:BackupCertMirrorCertForPartner.cer';
go
Create login PrincipalLogin2
with password='PrincipalLogin'
go
Create user PrincipalLogin2
from login PrincipalLogin2
go
Grant connect on endpoint::Principal_Endpoint_Mirroring to PrincipalLogin2
go
create certificate WintnessCertForPartnerPub
authorization PrincipalLogin2
from file ='D:BackupCertCertForDBRole.cer'
GO
ALTER DATABASE Mirrortest
SET PARTNER = 'TCP://10.1.40.158:5022'
GO
ALTER DATABASE Mirrortest
SET witness = 'TCP://10.10.11.30:7000'
GO
select * from sys.certificates
/* -------- 2. ENABLE OUTBOUND CONNECTIONS ON THE MIRROR -------- */
--On Mirror
--Remove the database
--Connect to either partner.
--Issue the following Transact-SQL statement:
ALTER DATABASE Mirrortest SET PARTNER OFF
--Optionally, you can recover the former mirror database. On the server instance that was the mirror server, enter:
--RESTORE DATABASE Mirrortest WITH RECOVERY;
RESTORE DATABASE [Mirrortest] FROM
DISK = N'D:BackupCertMirrortest.bak'
WITH FILE = 1, NORECOVERY, NOUNLOAD, REPLACE, STATS = 10
GO
select * from sys.endpoints
drop endpoint Mirror_Endpoint_Mirroring
select * from sys.certificates
Create certificate MirrorCertForPartner
with subject ='this is the certificate for mirror',
start_date='06/25/2006'
backup certificate MirrorCertForPartner
to file='d:ackupcertMirrorCertForPartner.cer'
CREATE ENDPOINT Mirror_Endpoint_Mirroring
STATE=STARTED
AS TCP (LISTENER_PORT=5022)
FOR DATABASE_MIRRORING (
Authentication=Certificate MirrorCertForPartner
,ROLE=ALL)
GO
/* -------- 3. ENABLE OUTBOUND CONNECTIONS ON THE WINTESS -------- */
--On Witness
USE [master]
GO
select * from sys.certificates
drop certificate CertForDBRole
GO
create master key
encryption by password='asdf'
Create certificate CertForDBRole
with subject='this is a certificate for pricipal role',
start_date='06/25/2006'
backup certificate CertForDBrole
to file='c:CertForDBRole.cer'
select * from sys.endpoints
drop endpoint Witness_Endpoint_Mirroring
CREATE ENDPOINT Witness_Endpoint_Mirroring
STATE=STARTED
AS TCP (LISTENER_PORT=7000)
FOR DATABASE_MIRRORING (
Authentication=Certificate CertForDBRole
,ROLE=ALL)
GO
/* -------- 4. ENABLE INBOUND CONNECTIONS ON THE PRIMARY -------- */
use master;
go
DROP USER PrincipalLogin1
DROP LOGIN PrincipalLogin1
DROP USER PrincipalLogin2
DROP LOGIN PrincipalLogin2
GO
Create login PrincipalLogin1
with password='PrincipalLogin'
go
Create user PrincipalLogin1
from login PrincipalLogin1
go
Grant connect on endpoint::Principal_Endpoint_Mirroring to PrincipalLogin1
go
---stop
create certificate MirrorCertForPartnerPub
authorization PrincipalLogin1
from file = 'd:BackupCertMirrorCertForPartner.cer';
go
Create login PrincipalLogin2
with password='PrincipalLogin'
go
Create user PrincipalLogin2
from login PrincipalLogin2
go
Grant connect on endpoint::Principal_Endpoint_Mirroring to PrincipalLogin2
go
create certificate WintnessCertForPartnerPub
authorization PrincipalLogin2
from file ='D:BackupCertCertForDBRole.cer'
GO
ALTER DATABASE Mirrortest
SET PARTNER = 'TCP://10.1.40.158:5022'
GO
ALTER DATABASE Mirrortest
SET witness = 'TCP://10.10.11.30:7000'
GO
select * from sys.certificates
/* -------- 5. ENABLE INBOUND CONNECTIONS ON THE MIRROR -------- */
use master;
go
DROP USER MirrorLogin1
DROP LOGIN MirrorLogin1
DROP USER MirrorLogin2
DROP LOGIN MirrorLogin2
GO
Create login MirrorLogin1
with password='MirrorLogin'
go
Create user MirrorLogin1
from login MirrorLogin1
go
Grant connect on endpoint::Mirror_Endpoint_Mirroring to MirrorLogin1
go
--stop
create certificate PrincipalCertForPartnerPub
authorization MirrorLogin1
from file = 'd:BackupCertPrincipalCertForPartner.cer';
go
Create login MirrorLogin2
with password='MirrorLogin'
go
Create user MirrorLogin2
from login MirrorLogin2
go
create certificate WitnessCertForPartnerPub
authorization MirrorLogin2
from file ='D:BackupCertCertForDBRole.cer'
GO
Grant connect on endpoint::Mirror_Endpoint_Mirroring to MirrorLogin2
go
ALTER DATABASE Mirrortest
SET PARTNER = 'TCP://10.10.116.42:5022'
GO
ALTER DATABASE Mirrortest
SET WITNESS = 'TCP://w7mis02:5024'
GO
/* -------- 6. ENABLE INBOUND CONNECTIONS ON THE WITNESS -------- */
use master;
go
DROP USER WitnessLogin1
drop login WitnessLogin1
DROP USER WitnessLogin2
drop login WitnessLogin2
Create login WitnessLogin1
with password='WitnessLogi*n@'
go
create user WitnessLogin1
from login WitnessLogin1
go
create certificate PrincipalCertForPartnerPub
authorization WitnessLogin1
from file = 'c:ackupcertPrincipalCertForPartner.cer';
go
--***************************************
Create login WitnessLogin2
with password='WitnessLogi*n@'
go
create user WitnessLogin2
from login WitnessLogin2
go
create certificate MirrorCertForPartnerPub
authorization WitnessLogin2
from file = 'c:ackupcertMirrorCertForPartner.cer';
go
Grant connect on endpoint::Witness_Endpoint_Mirroring to WitnessLogin1
go
Grant connect on endpoint::Witness_Endpoint_Mirroring to WitnessLogin2
go
All runs normally,But how can't be auto failover?
View 5 Replies
View Related
Dec 27, 2006
I was trying to test mirroring and now would like to delete the mirror database but it says I need to remove database mirroring first. I deleted the endpoint and cannot figure out how to remove the mirroring. Can someone please help.
View 1 Replies
View Related
Feb 21, 2008
Hi all;
I want to implement "Auto disconnection" (or kill) of user session that exceed a specified idle duration in SQL Server 2005.
I know how do that in oracle by creating a profile and set the IDLE_TIME paramter and asign that profile to all users. But in SQL Server i don't know how to do it.
Can anyone help me.
Kindly
View 2 Replies
View Related
May 12, 2007
Hello, I am pretty new with SQL Server 2005.
I have installed SQL Server Express Edition. I have migrated a set of tables from Oracl10g (by using Microsoft's Migration Tool Kit).While I am trying the following simple update command, the session hangs and it never finishes !!!!!!!!!!!!
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
select pos_key from pos_station where staff_key = 1105
POS_KEY
=======
NULL
update pos_station set pos_key = 1 where staff_key = 1105
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The table has a few constraints and a couple of indices in place.
Then I create another table (but no contraints or indices), just copy the data from the problematic one and the update WORKS (in msecs) :
update pos_station_new set pos_key = 1 where staff_key = 1105
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Is there any way to tell if the table (any table in SQL Server) is corrupted or not ?
How can I tell if a session is waiting for something and what is that something ?
Thank you very much for your help.
Tom
View 7 Replies
View Related
Dec 31, 2007
Hi,
Does any know how to increase a session timeout for Report Creation uing SQL Server 2005 Reporting Services. Iam trying to export a report (to a .pdf) using SQL 05 reporting services. However, it seems that the the query is timing out coz of session-time out. Can anyone tell me how to increase this value ?
Thanks
Nik
View 11 Replies
View Related
Dec 4, 2007
Hello. We recently ran into extremely large transaction log sizes on our SQL 2005 box...turns out they were not being backed up. After doing some research, I found that they should be backed up very frequently in order to kee their sizes down. I kind of inherited the mess, but got three maintenance plans set up:
FULL Backup that runs weekly
DIFFERNTIAL Backup that runs nightly
TRANSACTION LOG backup that runs hourly
However, since I implemented the plans there has been high CPU utilization at all times. I finally figured out what was causing it today...the BACKUP LOG process is hanging in "Suspended" mode when I view processes. I have to manually kill them to release the CPU utilization.
How can I trace the cause of the hang? Is there a better way to backup/truncate the log files?
Regards,
Matthew
View 2 Replies
View Related
Jul 21, 2006
Hi,
We are experiencing intermittent authentication errors "Error: 18456, Severity: 14, State: 10" on a customer's production server. This is a new server that has just been rolled out in the past several months. Rebooting the server appears to make the problem go away. We are using SQL authentication from a separate server that is running IIS. The application always uses the same username and password to connect.
Server info:
select @@version
Microsoft SQL Server 2005 - 9.00.2047.00 (X64)
Apr 14 2006 01:11:53
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
select @@version
SP1
Sample error from SQL Server errorlog:
Date 7/7/2006 10:53:24 AM
Log SQL Server (Archive #2 - 7/7/2006 12:20:00 PM)
Source Logon
Message
Error: 18456, Severity: 14, State: 10.
MSDN (http://msdn2.microsoft.com/en-us/library/ms366351.aspx) lists various states for this error message but 10 is not included, and it says "Other error states exist and signify an unexpected internal processing error."
Note: This was not a case of a transient error that occurs only when SQL Server is starting up - these errors occurred at a variety of times, two months after the server was last rebooted / SQL Server last restarted.
Thanks for any help you can provide.
Regards,
-Frank.
View 26 Replies
View Related
Jul 6, 2007
Hi,
I have database with unlimited growth in Data with 2MB growth and Log File with 1MB growth. The continuous data is inserted with min 20KB per minute. We struct with following error and Log file size is too large (85GB) than Data file(20GB). Now server is not allowing to take backup as diskspace is not available.
Msg 9002, Level 17, State 2, Procedure DumpData, Line 10
The transaction log for database '%DB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
status at SYS.DATABASES:
log_reuse_wait log_reuse_wait_desc
-------------- ------------------------------------------------------------
2 LOG_BACKUP
Please help me to resolved the issue and let me know hints to shrink LOG file. Data inserted are using ADO applications that uses some insert/select stored procedures that does not have begin transaction-Commit Transaction block as appliction issues the Commit over connection object.
Regards,
Pavan
View 7 Replies
View Related
Apr 26, 2007
I'm getting a specific error when i try to run a .sql script for a Custom TableProfileProvider ,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following error. It will produce the table but with "Errors" which dosn't do anyone any good to have errors in the table. I even used the Sql Server Surface Area Configuration to add a new Administrator with the name listed below (WYATT-PCWyatt), that didnt help either..Here is part of the Sample Scheme the problem lies in the [YOURMACHINENAMEASPNET]
Server = WYATT-PCSQLEXPRESS
Computer Name = Wyatt-PC
OS: Windows Vista Home Premium
===========================================================
use TableProfileProviders
go
--
--grants on ASP.NET stored procedures and tables used by the custom providers
--
grant EXECUTE on dbo.aspnet_Applications_CreateApplication to [YOURMACHINENAMEASPNET]
grant EXECUTE on dbo.aspnet_Users_CreateUser to [YOURMACHINENAMEASPNET]
grant SELECT on dbo.aspnet_Users to [YOURMACHINENAMEASPNET]
grant UPDATE on dbo.aspnet_Users(LastActivityDate) to [YOURMACHINENAMEASPNET]
go
--drop table dbo.ProfileTable_1
--go
create table dbo.ProfileTable_1 (
UserId uniqueidentifier not null Primary Key,
FirstName nvarchar(50) null,
LastName nvarchar(50) null,
Age int null,
LastUpdatedDate datetime not null)
go
grant SELECT,INSERT,UPDATE,DELETE on dbo.ProfileTable_1 to [YOURMACHINENAMEASPNET]
go
================================================================================
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
How can i fix this??
View 16 Replies
View Related
Nov 2, 2006
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
View 8 Replies
View Related
Aug 2, 2007
Can I use Databse Mirroring to mirror a DB from 2000 in to Sql server 2005?
View 7 Replies
View Related
Sep 20, 2001
Hi all,
I need some solution..
When i execute a program it first deletes all datas from a
'X' table .Then fetches data from various other tables and
inserts into this 'X' table.I finally generate a report from
this 'X' table.
Now the problem is,
USER 1 : Executes the program - Datas in 'X' table got deleted and
filled up with new data.Report is getting processed.....
USER 2 : Executes the same program - Datas in the same 'X' table
getting deleted ..
So the report process of USER 1 got affected.
Solution 1 : Using IP address of local machine i solved the problem.But
i need a concrete solution for this ..something related to sessions..
CAN ANYONE HELP ??
Thanx and Regards
Prabhu
View 2 Replies
View Related
Feb 1, 2006
Does Session term exist in SQL Server?If yes, when it creates, how can monitor it. And where does itsinformation store?Thanks alot
View 1 Replies
View Related
Mar 15, 2006
We have a new server that is 64-bit and I have been approached about using the old 32-bit SQL Server (after a complete format and reinstall) for a mirrored server.
Either that, or buy a new Server with less power that would be used in times of need.
View 4 Replies
View Related
