I need to check and see if there are multiple dates here and if there aren't then return the date, but if there are return the word various.
CASE WHEN COUNT(vew_DSG_BlackBookDetail.dDistribution) = 1 THEN vew_DSG_BlackBookDetail.dDistribution ELSE 'Various' END
I tried it like this, but get back the following error:
Didn't expect COUNT after the SELECT column list.
Any help would be greatly appreciated.
Thank you!
I have to count the number of Ideas and Markets here.
CASE WHEN Team IN ('Development/Deployment Project', 'Deployment Fixed Team', 'Development Fixed Team', 'Non Fixed Team') THEN 'Ideas' ELSE 'Markets' END
I need to get a total count of leads and then separate the counts by either Retail or Wholesale -
Here's my table schema -
CREATE TABLE [dbo].[Sent] (
[IdentID] [int] IDENTITY (1, 1) NOT NULL ,
[LeadID] [bigint] NOT NULL ,
[AffiliateID] [bigint] NULL ,
[PartnerID] [int] NULL ,
[FranchiseID] [bigint] NULL ,
[FirstName] [t_Name] NULL ,
[LastName] [t_LastName] NULL ,
[Address] [t_Address] NULL ,
[Zip] [t_ZipCode] NULL ,
[Make] [t_Make] NULL ,
[Model] [t_Model] NULL ,
[DateIn] [datetime] NULL ,
Here's my query - Since I'm grouping by the partnerid
select distinct make, count(leadid) as TotalCount, case
when PartnerID = 1 then 'retail'
else 'wholesale' end
as disposition
from leads_sent (nolock)where datein between '2007-09-01' and '2007-09-30'
group by make, partnerid
order by make
Here's a sample my current output -
Acura
1 wholesale Acura
2 wholesale Acura
4 wholesale Acura
5 wholesale Acura
21 wholesale Acura
34 wholesale Acura
37 wholesale Acura
56 wholesale Acura
57 wholesale Acura
72 wholesale Acura
510 retail Audi
1 wholesale Audi
3 wholesale Audi
7 wholesale Audi
12 wholesale Audi
16 wholesale Audi
18 wholesale Audi
23 wholesale
Here's the output I need
Make
Total Count
RetailCount
WSCount
Acura
798
510
288
Audi
256
75
181
Hi Everyone,
I am trying to do a query where I need to use as little C# as possible to build my gridview. Basically I have a column called statusID. There are about 15 options for this column but I only want to count certain ones. I want to count when statusID = 3 and output that into a column called "fullUnitsUsed" but when the value is 4 or > 13 I want it to count and put the result into a column called "halfUnitsUsed". I also want it to count based on the month. To accomplish this I have used CASE and GROUP BY. This has worked to some extent. Currently if I COUNT for one month I get the correct number of fullUnitsUsed and halfUnitsUsed used for January. Unfortunately the query returns 2 records for the month. The first one has a value for fullUnitsUsed and halfUnitsUsed is NULL, the second record has fullUnitsUsed as NULL and halfUnitsUsed has the correct value. I was hoping to output one record where both fullUnitsUsed and halfUnitsUsed have data. My other problem is that if I test for the entire year (which is what this query is supposed to do) there are 5 records returned for each month, 3 of the records have fullUnitsUsed and halfUnitsUsed both as NULL and for the other 2, one has fullUnitsUsed with data and the other has halfUnitsUsed with data and the other column in both records is NULL. The values for fullUnitsUsed and halfUnitsUsed are counted for the entire year as well, which I only want it to count based on each month. Below is my query, any suggestions about how to approach this will be greatly appreciated. If any clarification is needed please let me know. Again if I could get this to work completely with SQL and not need to use any more C# than I have to it would be preferable.
SELECT People.lastName + ', ' + People.firstName AS fullName, Property.Name, NYSDDSORegion.Description, OpenDays.[month], OpenDays.maxOpenDays,CASE Attend.statusID
WHEN 3 THEN COUNT(Attend.statusID)
END AS fullUnitsUsed,CASE Attend.statusID
WHEN 4 THEN COUNT(Attend.statusID)
WHEN 14 THEN COUNT(Attend.statusID)
WHEN 15 THEN COUNT(Attend.statusID)
WHEN 16 THEN COUNT(Attend.statusID)
WHEN 17 THEN COUNT(Attend.statusID)
WHEN 18 THEN COUNT(Attend.statusID)
WHEN 19 THEN COUNT(Attend.statusID)
WHEN 20 THEN COUNT(Attend.statusID)
END AS halfUnitsUsed
FROM Attend INNER JOIN People ON Attend.personID = People.personID
INNER JOIN Property ON Attend.propertyID = Property.propertyID
INNER JOIN NYSDDSORegion ON Property.RegionID = NYSDDSORegion.RegionID
CROSS JOIN OpenDays
WHERE (Attend.attendDate BETWEEN '1/1/2007' AND '12/31/2007')
GROUP BY Property.Name, People.lastName, NYSDDSORegion.Description, People.firstName, OpenDays.monthID, OpenDays.[month], OpenDays.maxOpenDays, Attend.statusID
ORDER BY Property.Name, fullName, NYSDDSORegion.Description
It doesn't seem possibly, but maybe?
Is there a way to have an expression be used, but also benefit from using distinct on a column?
I'm looking for something like:
sum(case when dtEntered > '1-1-2006' then 1 else 0 end)
but also encorporating somehow a distinct count on UserName. So a username showing twice would only count once, and this would only be counted if the record's dtEntered date was greater than Jan 1, 2006.
The reason I'm writing the statement that way is because there are 5 columns which aggregate data by different time periods.
If it's not possible, I will just end up joining to the table multiple times, putting the date filter in the where clause.
Hi,
I have the following query, that returns the proper count value I am looking for. I would like to modify it a little bit, but can't remember exactly how to do it.
select count(messageFromID) FROM tblMessage WHERE messageFromID = 1000) as OutBoundMessages
Basically now, it returns the "OutBoundMessages" column
I would like it to return "OutboundMessages_unChecked" and "OutboundMessages_checked" as well as "OutboundMessages_total" (I guess I could determine this value by adding the two values in the front end too. I definatley dont want to do a lookup to determine the total )
I determine if the column is "checked" or "unChecked" by a column in
tblMessage
For example
tblMessage.checked = 1 = ("checked")
tblMessage.checked = 0 = ("unChecked")
any help much appreciated..
thanks!
mike123
My table structure like below.
id date value1 value2
1 5-june-2104 Yes No
1 6-june-2014 No Yes
2 5-june-2104 Yes Yes
Want to calculate yes count on any day for same id
SELECT COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END) AS [New Visitors],
COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END) AS [Returning Visitors]
FROM content_hits_tbl
WHERE (hit_date BETWEEN DATEADD(mm, - 1, GETDATE()) AND GETDATE())
=======================
How do I add up both COUNT/CASE columns? Would it be:
SUM([New Visitors] + [Returning Visitors]) AS Total
I tried this and it doesn't work. I get invalid column names error for both.
I have even tried:
SUM([COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END)] + [COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END)]) AS Total
You would think that there would be some gui functionality in VS08 that would do this...
Thoughts are greatly appreciated!
TT
I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.
Right now I am achieving this by the following case statement
SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class'
WHEN Stcount>=10 and StCount<=50THEN 'Medium Class'
WHEN Stcount>50 THEN 'Big Class'
END
FROM(
select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl
But can I do this with just one select statement?
I have a table of orders. I was asked to count the orders that fall into specific dollar buckets. Normally I would use a CASE statement for this, but in this case, there are over 100 different buckets!
For example, I need to count the orders in $5 increments up to $400. The CASE statement would look like this:
Code:
CASE
WHEN sum(revenue) BETWEEN 0.01 AND 5.00 THEN [0.01 to 5.00]
WHEN sum(revenue) BETWEEN 5.01 AND 10.00 THEN [5.01 to 10.00]
...
WHEN sum(revenue) BETWEEN 395.01 AND 400.00 THEN [395.01 to 400.00]
Is there an easier way to do this, maybe with a loop?
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedHello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies View RelatedI am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedI have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
below data,
Countery
parentid
CustomerSkId
sales
A
29097
29097
10
A
29465
29465
30
A
30492
30492
40
[code]....
Â
Output
Countery
parentCount
A
8
B
3
c
3
in my count function,my code look like,
 set buyerset as exists(dimcustomer.leval02.allmembers,custoertypeisRetailers,"Sales")
set saleset(buyerset)
set custdimensionfilter as {custdimensionmemb1,custdimensionmemb2,custdimensionmemb3,custdimensionmemb4}
set finalset as exists(salest,custdimensionfilter,"Sales")
Set ProdIP as dimproduct.dimproduct.prod1
set Othersset as (cyears,ProdIP)
(exists(([FINALSET],Othersset,dimension2.dimension2.item3),[DimCustomerBuyer].[ParentPostalCode].currentmember, "factsales")).count
it will take 12 to 15 min to execute.
I am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database.
Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case.
In other words how do deal with case sensitiviy issues.
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View RelatedI use SQL 2000
I have a Column named Bool , the value in this Column is 0�0�1�1�1
I no I can use Count() to count this column ,the result would be "5"
but what I need is "2" and "3" and then I will show "2" and "3" in my DataGrid
as the True is 2 and False is 3
the Query will have some limited by a Where Query.. but first i need to know .. how to have 2 result count
could it be done by Count()? please help.
thank you very much
SQL 2000I have a table with 5,100,000 rows.The table has three indices.The PK is a clustered index and has 5,000,000 rows - no otherconstraints.The second index has a unique constraint and has 4,950,000 rows.The third index has no constraints and has 4,950,000 rows.Why the row count difference ?Thanks,Me.
View 5 Replies View RelatedThe following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
Hi all
i using lookup error output to insert rows into table
Rows count rows has been inserted on the table 59,123,019 mill
table rows count 6,878,110 mill ............................
any ideas
Is there a difference in performance when using count(*) or count(columnname)?
View 10 Replies View RelatedI would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month],
FROM RECalendar
WHERE
(EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101)))
AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
Thank you for your assistance in advance.
Joel
I just can't get the case to work for me in this view.
CASE WHEN Isnull(dbo.Payments.AmountPaid,'No') THEN 'No' WHEN dbo.Payments.AmountPaid >0 THEN 'Yes' END AS Payment_StatusThe error I get is:
An expression of non-boolean type specified in a context where a condition is expected, near 'THEN'.
ALTER VIEW [dbo].[AffiliationPayments]ASSELECT dbo.Affiliations.AffiliationType, dbo.Affiliations.AffiliationDescription, dbo.Affiliations.AffiliationEnd, dbo.Payments.PaymentDate, dbo.Payments.AmountPaid, dbo.Affiliations.Client_ID,CASE WHEN Isnull(dbo.Payments.AmountPaid,'No') THEN 'No' WHEN dbo.Payments.AmountPaid >0 THEN 'Yes' END AS Payment_StatusFROM dbo.Affiliations LEFT OUTER JOIN dbo.Payments ON dbo.Affiliations.Client_ID = dbo.Payments.Client_ID
I have a deadline that is set ahead of time and will not change. I need to insert this deadline for all new users, so I want to set in the DB and I have tried to insert the deadline into the db using a case(below)
Error -2147217900
Error -2147217900
Incorrect syntax near the keyword 'CASE'.
ALTER PROCEDURE prcStartWeeks @UserID VARCHAR(50) ASSET NOCOUNT ONDECLARE @Result INTDECLARE @ID INTDECLARE @Weeks INTDECLARE @DeadLine VARCHAR(8)SET @ID = 0SET @Weeks = 1SELECT @ID = ISNULL((SELECT peID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN SELECT @Result = -1 ENDELSE BEGIN WHILE @Weeks < 18 BEGIN CASE @Weeks WHEN '1' THEN @DeadLine = '5/9/2006' WHEN '2' THEN @DeadLine = '9/15/2006' WHEN '3' THEN @DeadLine = '9/22/2006' WHEN '4' THEN @DeadLine = '9/29/2006' WHEN '5' THEN @DeadLine = '10/6/2006' WHEN '6' THEN @DeadLine = '10/13/2006' WHEN '7' THEN @DeadLine = '10/20/2006' WHEN '8' THEN @DeadLine = '10/27/2006' WHEN '9' THEN @DeadLine = '11/3/2006' WHEN '10' THEN @DeadLine = '11/10/2006' WHEN '11' THEN @DeadLine = '11/17/2006' WHEN '12' THEN @DeadLine = '11/21/2006' WHEN '13' THEN @DeadLine = '11/28/2006' WHEN '14' THEN @DeadLine = '12/5/2006' WHEN '15' THEN @DeadLine = '12/12/2006' WHEN '16' THEN @DeadLine = '12/19/2006' WHEN '17' THEN @DeadLine = '12/28/2006' END INSERT INTO tblUserWeekly(PEID,WeekID,Points,DeadLine) VALUES(@ID,@Weeks,0,@DeadLine) SET @Weeks = @Weeks + 1 END SELECT @Result = 0 END
I want to use case in my date range to get last weeks range. I have a similar proc that uses variables, but my application UI will not allow this in production.
Error incorrect syntax near '=' on line 15
-- begin
select
Company
,Carrier
,Client
,DatePaid
,DateBilled
,cast(PremiumReceived as money)
,cast(PolicyAmount as money)
from view_billing
where
cast(datebilled as datetime) between
(cast(datebilled as datetime) =
case
when datepart(dw,getdate()) = 2 then getdate()-8
when datepart(dw,getdate()) = 3 then getdate()-9
when datepart(dw,getdate()) = 4 then getdate()-10
when datepart(dw,getdate()) = 5 then getdate()-11
when datepart(dw,getdate()) = 6 then getdate()-12
when datepart(dw,getdate()) = 7 then getdate()-13
end)
and
cast(datebilled as datetime) =
case
when datepart(dw,getdate()) = 2 then getdate()-1
when datepart(dw,getdate()) = 3 then getdate()-2
when datepart(dw,getdate()) = 4 then getdate()-3
when datepart(dw,getdate()) = 5 then getdate()-4
when datepart(dw,getdate()) = 6 then getdate()-5
when datepart(dw,getdate()) = 7 then getdate()-6
end
and and company like '%Comp%'
-- end
is it possible to test two fields in a case statement in SQL ?
View 3 Replies View Related