If @FormType = 'SimplifiedApp Or (@FormType = 'AccidentApp' And @FormId
= 'AccidentAppRls0304') Then
@Gender
Else
'' )
The entry of a value for clnt_gender depends on the statements in the
If condition. If one condition is met, then the parameter value in
@Gender is used, otherwise, the entry is an empty string.
How would you recommend that I handle this kind of situation?
case when a=b then update table1 set columnA = convert(datetime,columnB,113) from table2 where a=b insert into table1 (columnames) select (few columns, and few defined value) from table2 where a=b else insert into table1 (columnames) select (few columns) from table2 where a=b end
from there u can know im a newbie n know nothing bout sql :D
when inserting into a temp table, if im creating the table there an then with select into statement, can i use if or case statements to decide on column names.
eg select if bla = 0 then call col a else call col b
Is it possible to use CASE statement with INSERT /UPDATE statement?this is what i am trying to do i have a table like this Field1 Field2 Field3 FieldType1 FieldType2 FieldType3 1-when there is no data for a given combination of Field2 and Field3,i need to do "insert".i.e the very first time and only time 2-Second time,when there is already a row created for a given combination of Field2 and Field3,i would do the update onwards from there on. At a time value can be present for only one of the FieldType1,FieldType2,FieldType3) for insert or update I am passing a parameter to the stored procedure,which needs to be evaluated and wud determine,which field out of (FieldType1,FieldType2,FieldType3)has a value for insert or update .this is what i am trying to do in a stored procedure CREATE PROCEDURE dbo.StoredProcedure ( @intField1 int, @intField2 int, @intField3 int, @intFieldValue int , @evalFieldName varchar(4) )So i am trying something like CaseWHEN @evalFieldName ="Fld1" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,@intFieldValue,cast(null as int) fld2 ,cast(null as int) fld3) CaseWHEN @evalFieldName ="Fld2" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,@intFieldValue,cast(null as int) fld3) CaseWHEN @evalFieldName ="Fld3" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,cast(null as int) fld2,@intFieldValue) END similar trend needs to be followed for UPDATE as well..obiviousely its not working,gives me synatax error at case,when,then everywher.so can someone suggest me the alternative way?..i am trying to avoid writing stored procedure to insert/update for each individual fields..thanks a lot
Hi - Please excuse me if this is really simple, but I'm fairly new to this lark.
My (made up) code is below... I'd be grateful for any pointers.
insert into [tblInvoices] (full_period, supplier_no, account_code, tran_amount, function) select full_period, supplier_no, account_code, tran_amount case when substring(account_code,1,2) = 'FY' then '-' when isNumeric(account_code) then left(account_code, 2) when not isNumeric(substring(account_code,1,2)) then left(account_code, 1) else 'oops' end as function, from tblLoadMSV900_i end
Is this even close?
I'm using a stored proc to insert the data from tblLoadMSV900_i into tblInvoices and at the same time insert some data into the function field.
In plain english I want make sure that: If the first 2 chars of account_code are 'FY' then function='-', If the first char of account_code is numeric then function=left(account_code, 2), If the the first char is not numeric (and if first two chars are not 'FY' i.e. first char could be 'F') then function=left(account_code, 1)
And there's plenty more where this came from! But if I can crack this with your help then I should have a better idea about the rest of the proc.
can insert statement works fine in case when function
for example
case when condition1=true then (first insert statement based on some condition) when condition2=true then (second insert statement based on some other condition) end
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
Hi All, I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance. My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code: Insert into myTblA (TblA_ID, mycasefield = case when mycasefield = 1 then 99861 when mycasefield = 2 then 99862 when mycasefield = 3 then 99863 when mycasefield = 4 then 99864 when mycasefield = 5 then 99865 when mycasefield = 6 then 99866 when mycasefield = 7 then 99867 when mycasefield = 8 then 99868 when mycasefield = 9 then 99855 when mycasefield = 10 then 99839 end, alt_min, alt_max, longitude, latitude ( Select MTB.LocationID MTB.model_ID MTB.elevation, --alt min null, --alt max MTB.longitude, --longitude MTB.latitude --latitude from MyTblB MTB );
The error I'm getting is: Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works. I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END, shipment_status_text = CASE [logic for condition 1] THEN 'Condition 1 text' WHEN [logic for condition 2] THEN 'Condition 2 text' WHEN [logic for condition 3] THEN 'Condition 3 text' WHEN [logic for condition 4] THEN 'Condition 4 text' ELSE 'Error' END, ...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block ...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END, ...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database. Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case. In other words how do deal with case sensitiviy issues.
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
hello friends my one insert code lines is below :) what does int32 mean ? AND WHAT IS DIFFERENT BETWEEN ONE CODE LINES AND SECOND CODE LINES :)Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString) Dim cmd As New SqlCommand("Insert into table1 (UserId) VALUES (@UserId)", conn) 'you should use sproc instead cmd.Parameters.AddWithValue("@UserId", textbox1.text) 'your value Try conn.Open()Dim rows As Int32 = cmd.ExecuteNonQuery() conn.Close()Trace.Write(String.Format("You have {0} rows inserted successfully!", rows.ToString())) Catch sex As SqlExceptionThrow sex Finally If conn.State <> Data.ConnectionState.Closed Then conn.Close() End If End Try MY SECOND INSERT CODE LINES IS BELOWDim SglDataSource2, yeni As New SqlDataSource() SglDataSource2.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString").ToString SglDataSource2.InsertCommandType = SqlDataSourceCommandType.Text SglDataSource2.InsertCommand = "INSERT INTO urunlistesi2 (kategori1) VALUES (@kategori1)" SglDataSource2.InsertParameters.Add("kategori1", kategoril1.Text)Dim rowsaffected As Integer = 0 Try rowsaffected = SglDataSource2.Insert()Catch ex As Exception Server.Transfer("yardim.aspx") Finally SglDataSource2 = Nothing End Try If rowsaffected <> 1 ThenServer.Transfer("yardim.aspx") ElseServer.Transfer("urunsat.aspx") End If
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
An insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
Hello I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake... Here's the sql management studio diagram :
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Question_SurveyTemplate". The conflict occurred in database "ankietyzacja", table "dbo.SurveyTemplate", column 'id'. The statement has been terminated. at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable) at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ? Thanks a lot.
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset. I have teh following code but it works fien when column names are given ahead of time. If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match. Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition. here is my code... SET @sql1='select * from table1'SET @sql2='select * from table2' IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn -- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
Hello, I'm new to the forum and new to SQL, ASP.NET, etc. I am creating an intranet site for my company in VS 2005 and have run into a very annoying problem that I can't seem to solve. I have tried Googling it and came up empty. I have a database in SQL Express 2005 and my website will be accessing several tables within the database. I can retrieve info just fine and I can update, delete, etc just fine using gridview or other prebuilt tools, but when I add a few text boxes and wire a button to the SqlDataSource.Insert() command, I get a new record that is full of null values except for the identity key I have set. The kicker is that I am also using a master page and when I duplicate the web page without the master page link, everything works just fine. The following snippets show what I'm doing:<InsertParameters><asp:FormParameter Name="Name" Type="String" FormField="txtName" /><asp:FormParameter Name="Location" Type="String" FormField="ddlLocation" /><asp:FormParameter Name="Issue" Type="String" FormField="txtProblem" /></InsertParameters>Of course I match the formfields to the text boxes, create an onclick event for my button, the sqldatasource is configured correctly, it just doesn't work with the master page no matter what I do. Any help would be appreciated. Thanks
On my site users can register using ASP Membership Create user Wizard control. I am also using the wizard control to design a simple question and answer form that logged in users have access to. it has 2 questions including a text box for Q1 and dropdown list for Q2. I have a table in my database called "Players" which has 3 Columns UserId Primary Key of type Unique Identifyer PlayerName Type String PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table. I am having problems getting this to work and keep getting exceptions. Be very helpful if somebody could check the code and advise where the problem is??
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e) { SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1"); MembershipUser myUser = Membership.GetUser(this.User.Identity.Name); Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue; DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString()); DataSource.Insert();
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them 1) Create the table 2) Create the trigger 3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value 4) Drop the trigger 5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
GO /************************************************ 2) - Create the trigger ************************************************/ CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table] INSTEAD OF INSERT AS BEGIN
INSERT INTO my_table ( forename, surname) SELECT forename, surname FROM inserted
END
/************************************************ 3) - Do the insert ************************************************/
INSERT INTO my_table ( forename , surname ) OUTPUT inserted.my_table_id INTO @my_insert VALUES( @forename , @surname )
select @@identity -- expect this value in @my_insert table select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************ 4) - Drop the trigger ************************************************/
drop trigger [dbo].[trig_my_table__instead_insert] go
/************************************************ 5) - Re-run insert from 3) ************************************************/ -- @my_insert now contains row expected with identity of inserted row -- i.e. OK
I decided to change over from Microsoft Access Database file to the New SQLServerCe Compact edition. Although the reading of data from the database is greatly improved, the inserting of the new rows is extremely slow.
I was getting between 60 to 70 rows per sec using OLEDB and an Access Database but now only getting 14 to 27 rows per sec using SQLServerCe.
I have tried the below code changes and nothing seams to increase the speed, any help as I would prefer to use SQLServerCe as the database is much smaller and I€™m use to SQL Commands.
Details: VB2008 Pro .NET Frameworks 2.0 SQL Compact Edition V3.5 Encryption = Engine Default Database Size = 128Mb (But needs to be changes to 999Mbs)
Where Backup_On_Next_Run, OverWriteQuick, CompressAns are Booleans, all other column sizes are nvarchar and size 10 to 30 expect for Full Folder Address size 260
14 to 20 rows per second (Was 60 to 70 when using OLEDB Access)
TRY 2
Using Record Sets
Private Sub InsertRecordsIntoSQLServerce(ByVal Group_Name1 As String, ByVal Full_Folder_Address1 As String, ByVal File1 As String, ByVal File_Size_KB1 As String, ByVal Schedule_To_Run1 As String, ByVal Backup_Time1 As String, ByVal Last_Run1 As String, ByVal Result1 As String, ByVal Last_Modfied1 As String, ByVal Latest_Modfied1 As String, ByVal Backup_On_Next_Run1 As Boolean, ByVal Total_Backup_Times1 As String, ByVal Server_File_Number1 As String, ByVal Server_Number1 As String, ByVal File_Break_Down1 As String, ByVal No_Of_Servers1 As String, ByVal Full_File_Address1 As String, ByVal OverWriteQuick As Boolean, ByVal CompressAns As Boolean)
cmd.CommandText = "SELECT * FROM BackupDatabase" cmd.ExecuteNonQuery() Dim rs As SqlCeResultSet = cmd.ExecuteResultSet(ResultSetOptions.Updatable Or ResultSetOptions.Scrollable)
Dim rec As SqlCeUpdatableRecord = rs.CreateRecord()
rec.SetString(1, Group_Name1) rec.SetString(2, Full_Folder_Address1) rec.SetString(3, File1) rec.SetSqlString(4, File_Size_KB1) rec.SetSqlString(5, Schedule_To_Run1) rec.SetSqlString(6, Backup_Time1) rec.SetSqlString(7, Last_Run1) rec.SetSqlString(8, Result1) rec.SetSqlString(9, Last_Modfied1) rec.SetSqlString(10, Latest_Modfied1) rec.SetSqlBoolean(11, Backup_On_Next_Run1) rec.SetSqlString(12, Total_Backup_Times1) rec.SetSqlString(13, Server_File_Number1) rec.SetSqlString(14, Server_Number1) rec.SetSqlString(15, File_Break_Down1) rec.SetSqlString(16, No_Of_Servers1) rec.SetSqlString(17, Full_File_Address1) rec.SetSqlBoolean(18, OverWriteQuick) rec.SetSqlBoolean(19, CompressAns) rs.Insert(rec) Catch e As Exception MessageBox.Show(e.Message) Finally conn.Close() End Try End Sub
€™20 to 24 rows per sec
TRY 3
Using SQL Commands Direct
Private Sub InsertRecordsIntoSQLServerce(ByVal Group_Name1 As String, ByVal Full_Folder_Address1 As String, ByVal File1 As String, ByVal File_Size_KB1 As String, ByVal Schedule_To_Run1 As String, ByVal Backup_Time1 As String, ByVal Last_Run1 As String, ByVal Result1 As String, ByVal Last_Modfied1 As String, ByVal Latest_Modfied1 As String, ByVal Backup_On_Next_Run1 As Boolean, ByVal Total_Backup_Times1 As String, ByVal Server_File_Number1 As String, ByVal Server_Number1 As String, ByVal File_Break_Down1 As String, ByVal No_Of_Servers1 As String, ByVal Full_File_Address1 As String, ByVal OverWriteQuick As Boolean, ByVal CompressAns As Boolean)
I'm working on inserting data into a table in a database. The table has two separate triggers, one for insert and one for update (I don't like it this way, but that's how it's been for years). When there is a normal insert, done via a program, it looks like the triggers work fine. When I run an insert manually via a script, the first insert trigger will run, but the update trigger will fail. I narrowed down the issue to a root cause.
This root issue is due to both triggers using the same temporary table name. When the second trigger runs, there's an error stating that a few columns don't exist. I went to my test server and test db and changed the update trigger so that the temporary table is different than the insert trigger temporary table, the triggers work fine. The weird thing is that if the temporary table already exists, when the second trigger tries to create the temporary table, I would expect it to fail and say that it already exists.I'm probably just going to update the trigger tonight and change the temporary table name.
I am currently using openquery to insert data into a SQL 2000 database from a Lotus Notes database. The Lotus database is a linked server with a datasource named CLE_CARS_SF. My SQL table is called Webcases.
The query below works well because the table's columns are even in both databases:
Insert into Webcases select * from openquery(CLE_CARS_SF, 'Select * from Web_Cases')
I am moving this over to SQL 2005. The query works well, but I want to add a column to the Webcases SQL database and manually insert a value along with the openquery values.
My insert statement above no longer works because the column numbers don't match.
In a nutshell I would like a way to combine the following queries:
Insert into Webcases select * from openquery(CLE_CARS_SF, 'Select * from Web_Cases')
Insert into Webcases (insurancetype) Values ('SF')
I am working with parent child tables and want to populate the primary key on insert so that the user does not have to enter this for each record. Here is my codeInsertCommand="INSERT INTO [Awards] ([UFID], [DateAwarded], [Amount], [AwardingAgency]) Select UFID, @DateAwarded, @Amount, @AwardingAgency from master where GatorlinkName = @LoginName" <InsertParameters><asp:Parameter Name="LoginName" Type="String" /> <asp:Parameter Name="strusername" Type="String" /> <asp:Parameter Name="UFID" Type="String" /> <asp:Parameter Name="DateAwarded" Type="DateTime" /> <asp:Parameter Name="Amount" Type="Decimal" /> <asp:Parameter Name="AwardingAgency" Type="String" /> </InsertParameters> The UFID field is the only field that should be populated from SQL data the others are coming from a form view insert form. When I run an insert I get no error but the insert does not happen. I know that the @LoginName works since I am using this same logic in my select statement. Thanks in advance for your help,Ken
