Using CONVERT() In A Where Clause
Oct 26, 1998
Can anyone tell me how to display a variable? I am sending a integer in a QueryString to SQL select statement. The error message says to use the CONVERT()function. My problem is how to code(`"%&ect.) the `variable` below.
Example: "SELECT products.ordernum, cart.cartnum FROM products,cart Where CONVERT(CHAR(10),cartID) = `variable`.
The cartID is an integer and the `variable` has been converted through the QueryString?
I would appreciate some help.
Duane
View 2 Replies
ADVERTISEMENT
Apr 15, 2015
I have an index on a date field but, the datatype is nvarchar. If I convert to datetime in my where clause, will the index still be used? For example
select MRN, Name, AppointmentDate
from DATA
where convert(datetime, AppointmentDate, 121) between '2015-04-01' and '2015-04-30'
View 7 Replies
View Related
May 28, 2008
I have a SQL query where am using WHERE clause as a result of which the NULL values are getting filtered...can u please help me to tranform this query into LEFT OUTER JOINS so as to avoid this filtration....my query is
SELECT A.JOINT_ID,A.SIZE_NBMM,A.ISFIELDJOINT,A.WELDTEST_CRI_ID,C.LINE_ID,D.TESTLEVELNO,E.COMPLETE FROM EALPS_DRWREVSPLJTS
A,EALPS_DRW_REV_SPL B,EALPS_DRW_REV_LINE C,EALPS_WELDTESTCRIT D,EALPS_ACTV_SEQ E WHERE B.SPOOL_ID=A.SPOOL_ID AND
B.LINE_ID=C.LINE_ID AND D.WELD_TEST_CRIT_ID=A.WELDTEST_CRI_ID AND E.ACTIVITY_CODE='VT' AND E.JOINT_ID=A.JOINT_ID
Thanks and Regards,
parama.
parama laha
View 6 Replies
View Related
Jan 6, 2015
I am wanting to get the job name based on sys.sysProcesses.[Program_name] column. Why is this query not returning any results even though the 2nd substringed guids are found the the sysJobs table?
SELECTCASE
WHEN RTRIM([program_name]) LIKE 'SQLAgent - TSQL JobStep (Job %' THEN J.Name
ELSE RTRIM([program_name])
END ProgramName
, Val1.UqID
, Val1.UqIDStr
[Code] ......
View 6 Replies
View Related
Nov 4, 2015
I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?
I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....
I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.
Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?
View 13 Replies
View Related
Jul 23, 2005
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View 3 Replies
View Related
Oct 25, 2007
I am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following.
When on SQL Server 2000 the following statement ran without issue:
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
GROUP BY TrackID
HAVING MAX(LegNum) = 1 AND
TrackID + 'x1' IN
(
SELECT
dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
)
Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time.
I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same?
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
WHERE TrackID + 'x1' IN
(
SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
GROUP BY TrackID
HAVING MAX(LegNum) = 1
)
View 3 Replies
View Related
Aug 15, 2006
Dear Experts,Ok, I hate to ask such a seemingly dumb question, but I'vealready spent far too much time on this. More that Iwould care to admit.In Sql server, how do I simply change a character into a number??????In Oracle, it is:select to_number(20.55)from dualTO_NUMBER(20.55)----------------20.55And we are on with our lives.In sql server, using the Northwinds database:SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2)) as a_number,cast ( STR(r.regionid) as int ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2) ) as a_number,cast (STR(r.regionid,7,2) as numeric ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044Str converts from number to string in one motion.Isn't there a simple function in Sql Server to convertfrom string to number?What is the secret?Thanks
View 4 Replies
View Related
May 14, 2008
2 examples:
1) Rows ordered using textual id rather than numeric id
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id
Result set is ordered as: 1, 11, 2
I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
View 12 Replies
View Related
May 27, 2008
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
View 1 Replies
View Related
May 27, 2008
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
View 1 Replies
View Related
Nov 20, 2004
Hi,
What is HAVING clause equivalent in the following oracle query, without the combination of "GROUP BY" clause ?
eg :
SELECT SUM(col1) from test HAVING col2 < 5
SELECT SUM(col1) from test WHERE x=y AND HAVING col2 < 5
I want the equivalent query in MSSQLServer for the above Oracle query.
Also, does the aggregate function in Select column(here the SUM(col1)) affect in anyway the presence of HAVING clause?.
Thanks,
Gopi.
View 3 Replies
View Related
Apr 3, 2008
How Can I use Top Clause with GROUP BY clause?
Here is my simple problem.
I have two tables
Categories
Products
I want to know Top 5 Products in CategoryID 1,2,3,4,5
Resultset should contain 25 Rows ( 5 top products from each category )
I hope someone will help me soon.
Its urngent
thanks in advance
regards
Waqas
View 10 Replies
View Related
Apr 4, 2007
hi..
i have basic question like
what is differance between conditions put in ON clause and in WHERE clause in JOINS????
see conditions that shown in brown color
select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)
select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ImplicitID = d1.ImplicitIDAND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)
another thing...
if we put AND d1.ImplicitID = d1.ImplicitID condition in second query then shall we remove
d1.ImplicitID >= d2.ImplicitID from WHERE clause????
View 6 Replies
View Related
Jan 21, 2008
Hi everyone,
I saw some queries where SQL inner join clause and the where clause is used at the same time. I knew that "on" is used instead of the "where" clause. Would anyone please exaplin me why both "where" and "on" clause is used in some sql Select queries ?
Thanks
View 6 Replies
View Related
Jul 20, 2005
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View 5 Replies
View Related
Sep 26, 2007
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
View 2 Replies
View Related
Jul 12, 2007
Hey guys, I'm a bit weak when it comes to doing ands and or's. I know what i want, but when I put it into statement, i dont get the results that i want.
I have 3 fields in my where clause. ID, LW, and LWU. The code is as follows:WHERE (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID NOT LIKE '%6%') AND (ID NOT LIKE '%7%') AND (ID NOT LIKE '%8%') AND (LW <> 1) AND (LWU <> 'test') OR (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID IS NULL) AND (LW <> 1) AND (LWU <> 'test')
I have a range of dates that I want to grab, in there I do not want any records where ID has 6,7,8 and I only want records where LW does not equal 1. UP to this point, it works fine. I get all the records that only return these values. However, the moment I add where LWU does not equal 'test'. it does not return the values I want. Furthermore, why can I not put this whole string into one and clause? I never understood why I had to create a second line following OR. the longer this query gets the more I get confused. Any help?
View 4 Replies
View Related
Jan 31, 2008
I have an insert statement that reads:
SELECT AppointmentID, PatientNo, PatientSurname, PatientForename, ConsultantName, HospitalName, Date, CONVERT (varchar, Time, 8), AppointmentStatus FROM [Appointment] WHERE ([AppointmentId] = @AppointmentId)
I also need to add another WHERE clause. This clause will mean that if the date is within 14 days of the actual date it will not ba able to be selected need help writing this not sure how to write it
Thanks in advance Mike.
View 6 Replies
View Related
Mar 19, 2004
I'm having a heck of time with this where clause. I have a table that contains client addresses, a client can have more than one address. So some of the addresses may be seasonal. I need to return only the current address based on a flag MailTo (bit) and a date range, just the month and day, the start and end are datetime datatypes.
Here is what i have tried:
I would really would like it to work on a range of month and day based on the startdate and enddate fields and the MailTo flag.
The table looks like this;
tblClientAddresses:
Address_ID,Client_ID,Address,Address2,City,State,Zip,Country,AddressType,StartDate,
EndDate,MailTo
WHERE (A.MailTo=1) AND (A.EndDate Is Null OR DatePart(mm,A.Enddate) >= DatePart(mm,GETDATE()) AND DatePart(dd,A.Enddate) >= DatePart(dd,GETDATE()))
Thank you for any help!
View 4 Replies
View Related
Mar 23, 2004
Hi,
I am working on a project involving text searching. I created a fulltext catalog on the database and scheduled it for every one minute. I created a fulltext index on a table and added some columns. I scheduled it as the database catalog. I ran a simple query like this in the query analyzer but got an error message that the catalog does not exist!
SELECT * FROM tbl_extra_skills WHERE CONTAINS(ITSkills, 'Word')
What am I doing wrongly?
View 1 Replies
View Related
Nov 9, 2004
I'm trying to do a simple ... SELECT ... FROM .... WHERE ... LIKE clause and i think my syntax is off. WHile using sql server ...... is the syntax
Where Name LIKE '%variable%' ??????
Or should I be using something differnent. Thank you in advance for any help.
View 1 Replies
View Related
Jun 7, 2005
hi alli need to create a sql statement that receives some values - my doubt is only about how to build that sql statementi've heard something about IN clause but could not apply it - could someone give any sample?First page: I have a textbox with some emails e.g. a@a.com, b@b.com, c@c.com etcSecond page: SELECT * FROM Table1 WHERE Field = ... IN ???thanks in advance
View 1 Replies
View Related
Dec 2, 2001
Hello,
I would like to create a "where in" clause on the fly. For example, if a user types into a text box three email address separated by a comma, I can not do a select on them because they are not strings - (adam@homebusiness.to, wanshark1@yahoo.com, test@test.com) <--- They should be ('adam@homebusiness.to', 'wanshark1@yahoo.com', 'test@test.com') Is there a sql function that tells the server that the stuff in parenthesis is a string? Thanks
View 1 Replies
View Related
Sep 1, 2003
we trying to use a UDF in Where Clause. This is taking too much of time. when we replaced the UDF with a subquery the query is fast.
Eg:
select Name, Designation, Address From Employee Where dbo.GetAge(EmpId) > 25
This is taking very long to fetch 12 records from 22,00,000 records.
When the same query has been converted to
select E.Name, E.Designation, E.Address From Employee E Where (select datediff("YY", EP.DOB, GETDATE()) from EmpPersonaldetail EP where EP.Empid= E.EmpId)
this gets executed very fast.
What could be the reason?
Pls help.
View 1 Replies
View Related
May 21, 2004
Hi,
I'm desperatly trying to make a query (inside a stored procedure which handles diferent tables and columns for each time) on which I have a variable as the table name. The problem is that I cant make it with the variable. What I need to do is something like this:
select @max_value=MAX(COL_NAME(@tableID,@columnID))
from (and here is my problem) @table(or @tableId or something :confused: )
I already tried with OBJECT_NAME but i can't do it, and there's no way i can know the table's name 'cause the idea is to perform the procedure to several tables.
Thanks in advance,
Trillium
View 2 Replies
View Related
Jul 20, 2005
I have a 3rd party app which generates the following in it's where clause. COnsidering all the ROJ's on this table, would it not be better to put the definitive part
"AND pe.enc_id = '8E487A58-E53A-42B3-8D0E-07AA1BE2E5E5'" before the joins, or does it really make a difference?
WHERE physical_exam_.enc_id =* pe.enc_id AND
immunization_mast_.enc_id =* pe.enc_id AND intk_trnf_master_.enc_id
=* pe.enc_id AND vital_signs_.enc_id =* pe.enc_id AND
med_sys_rev_.enc_id =* pe.enc_id AND tb_isolation_.enc_id
=* pe.enc_id AND zinmate_encounter_.enc_id
=* pe.enc_id AND intk_trnf_master8_.enc_id =* pe.enc_id AND pe_head_neck_.enc_id
=* pe.enc_id AND pe_eye_exam_.enc_id =* pe.enc_id AND pe_ears_.enc_id
=* pe.enc_id AND pe_throat_.enc_id =* pe.enc_id AND pe_skin_.enc_id
=* pe.enc_id AND pe_cardio_.enc_id =* pe.enc_id AND
pe_musculoskeletl_.enc_id =* pe.enc_id AND pe_neurological_.enc_id
=* pe.enc_id AND pe_breast_.enc_id =* pe.enc_id
AND pe_lymph_new_.enc_id =* pe.enc_id AND pe_abdomnl_.enc_id
=* pe.enc_id AND pe_male_.enc_id =* pe.enc_id AND pe_female_.enc_id
=* pe.enc_id AND pe_proctological_.enc_id =* pe.enc_id
AND pe.enc_id = '8E487A58-E53A-42B3-8D0E-07AA1BE2E5E5'
View 4 Replies
View Related
Jun 11, 2001
Can conditional tests be placed in the WHERE clause of a stored procedure?
If so, an example please! Thank you very much.
View 2 Replies
View Related
Aug 21, 2004
Hi, I just wanted to ask if this statement is right:
strSQL="SELECT * FROM Bidder WHERE 'BIDDER_ID=" & strBidderID & "' and 'BIDDER_ACCOUNT_ACTIVATED=yes' AND 'BIDDER_STATUS=UNBLOCKED';"
Can we give AND a number of times in a WHERE CLAUSE?
View 1 Replies
View Related
Aug 31, 2004
Hi everyone,
I have yet another question:
I have this cases table that looks like:
serial qty
53565 1
53566 2
53567 3
I am trying to select the rows where the sum of their quantity(qty) + 1 = 4.
This is the syntax I am trying to use (which does not return any rows)
select serial
from cases
group by serial
having ((sum(qty) + 1) = 4)
Desired results:
serial
53565
53566
I'm probably doing something real stupid up there...so any I'd appreciate any help :)
View 11 Replies
View Related
Nov 19, 2004
I just learn how to create a trigger. I had question: what is the different of For, after, instead of clause when we create a trigger? Why we need these? When to use each of these. Thanks in advance.
View 1 Replies
View Related
Sep 1, 2007
hi guys help please..I have a stored procedure below that basically retrieve data from tables and under my WHERE clause I want to execute conditions depending on the value of "@FilterBy" variable. If @FilterBy is equal to "Pending" then execute a conditions under "IF @FilterBy = 'Pending'" and if it equals to 'Delivered' then execute conditions under IF @FilterBy = 'Delivered'. But unfortunately I can't figure out how to do that my stored procedure below just wont work becuase it has an error "Incorrect syntax near the keyword 'IF'"...Any help guys on how to solve this problem? Thanks in advance!
USE [CFREEDB]
GO
/****** Object: StoredProcedure [dbo].[usp_DELIVERY_GET] Script Date: 09/01/2007 12:03:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[usp_DELIVERY_GET]
@FilterBy varchar(20),
@CustomerID int,
@FromDate datetime,
@ToDate datetime
AS
BEGIN
SELECT DISTINCT Delivery.CustomerID, Customer.Customer_LastName, Customer.Customer_MiddleName, Customer.Customer_FirstName,
Customer.Customer_Company, Customer.Customer_Address, Customer.Customer_ContactNo, Customer.Customer_Discount, Customer_Balance
FROM CFREE_Delivery Delivery
INNER JOIN CFREE_Customer Customer
ON Delivery.CustomerID = Customer.CustomerID
WHERE
IF @FilterBy = 'Pending'
BEGIN
Delivery.IsDeleted <> 1 AND
Delivery.IsDelivered IS NULL AND
Delivery.IsRemitted IS NULL AND
Delivery_Date BETWEEN @FromDate AND @ToDate
END
IF @FilterBy = 'Delivered'
BEGIN
Delivery.IsDeleted <> 1 AND
Delivery.IsDelivered IS NOT NULL AND
Delivery.IsRemitted IS NOT NULL AND
Delivery_Date BETWEEN @FromDate AND @ToDate
END
ORDER BY Customer.Customer_LastName, Customer.Customer_FirstName, Customer.Customer_MiddleName
END
View 1 Replies
View Related
May 12, 2008
I have a field named county in the database. The county likes "Kent county". They have "County" for the value. So i need to retrieve the records. I have the following query:
select LName, FName, Address, City, State, Zip, [COUNTY LONGNAME] as CountyLongName, from test where LName like @LName +'%' and FName like @FName +'%' and +[COUNTY LONGNAME] + like @County +'%' order by LName, FName
It didn't retrive the record. Can i use
like @County +'%' as @County is two strings combination.
Thanks for your help.
View 6 Replies
View Related
