Hi There i have a query that uses conditional Select statment my query is:
Select A,B,C case
when '1' then 'one'
when '2' then 'two'
end
from table
what if i want to include addional condition in the case condition like C case
when '1' and A is null then 'C is one and A is null'
Thank you :D
I am trying to have all these calulcation int one column under AccessFeeFinal, but it is not working. It was working when I just had the one case statement, but we needed to add another one in because we were getting some blank info in the column. Below are the two statement then I added a third on to show you how I think it should be, but it is not working for me. Please help me out if you can. I was thinking maybe I needed to use an IF Statement.
CASE clm_att1
WHEN 'NG' THEN (clm_H30)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_H30)*(clio_fee04/100)*.65
ELSE Null
END as AccessFeeFinal,
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE Null
END as AccessFeeFinal,
CASE clm_att1
WHEN 'NG' THEN (clm_H30)*(clio_fee04/100)
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_H30)*(clio_fee04/100)*.65
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE Null
END as AccessFeeFinal,
Thanks
Wendy
Any ideas why i am getting an error
set dateformat YMD
set datefirst 7
CREATE TABLE #ChildSessions (
siteid integer null
,childid integer null
,sessionid integer null
,sun integer default 0
,mon integer default 0
,tue integer default 0
,wed integer default 0
,thr integer default 0
,fri integer default 0
,sat integer default 0)
declare @firstofweek as datetime
declare @lastofweek as datetime
--select datepart(dw,getdate())
select @firstofweek=cast(floor(cast(dateadd(day,(-1*datepart(dw,getdate())+1),getdate()) as float)) as datetime)
select @lastofweek=dateadd(minute,-1,dateadd(day,7,@firstofweek))
declare @myday integer
set @myday=0
while @myday<7
BEGIN
INSERT INTO #childSessions
SELECT
c.siteid
,c.childid
,sg.sessionid
,case @myday WHEN 1 THEN 1 ELSE 0 end
,case @myday WHEN 2 THEN 1 ELSE 0 end
,case @myday WHEN 3 THEN 1 ELSE 0 end
,case @myday WHEN 4 THEN 1 ELSE 0 end
,case @myday WHEN 5 THEN 1 ELSE 0 end
,case @myday WHEN 6 THEN 1 ELSE 0 end
,case @myday WHEN 7 THEN 1 ELSE 0 end
FROM
child c
,sessionAttendance sa
,session s
,sessiongroup sg
WHERE
c.childID = sa.childid
AND c.siteid = sa.siteid
AND c.active = 1
AND c.potential = 0
AND s.identityid = sa.identityid
AND s.siteid = sa.siteid
AND sg.sessionid = s.sessionID
AND sg.siteid = s.siteid
AND s.dayofweek = @myday
AND @firstofweek <= sa.dateTo
AND @lastofweek >= sa.dateFrom
SET @myday=@myday+1
END
SELECT
c.forename,
c.surname,
sg.sessionname,
CASE (sum(sun)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(mon)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(tue)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(wed)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(thr)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(fri)) WHEN 0 THEN ' ' ELSE 'X',
CASE (sum(sat)) WHEN 0 THEN ' ' ELSE 'X'
FROM child c,sessiongroup sg,#childsessions cs
WHERE c.childid=cs.childid
AND c.siteid=cs.siteid
AND sg.sessionid=cs.sessionid
AND sg.siteid=cs.siteid
GROUP BY c.forename,c.surname,sg.sessionname
ORDER BY sg.sessionname,c.forename,c.surname
DROP TABLE #childsessions
Msg 102, Level 15, State 1, Line 66
Incorrect syntax near ','.
HI,
I have a problem with using CASE in my database,
Here is the code that I am using but not working
SELECT Computers.[Computer ID], Computers.Model, Computers.[Dell Service Tag], Users.[First Name] CASE WHEN Users.[first name] is NULL THEN Users.[user ID] ELSE Users.[First Name]+' '+Users.[Last Name] AS NAME ENDFROM Computers INNER JOIN Users ON Computers.[Computer ID]=Users.[Computer ID]ORDER BY Users.[First Name];
Could you please tell me where is wrong?Thanks in advance,Azi
I have this case statement below it is for an access fee. My problem that I am having is that now I am getting a number that is huge. Example, 8.2350000000. I need this to be rounded up and numbers srinked to 8.24, how can I add that in my case statement below? Please help if you can.
Thanks
CASE clm_att1
WHEN 'NG' THEN CASE clm_h30 WHEN 0 THEN cast(clm_sppo as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
ELSE cast(clm_H30 as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
END
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN CASE clm_h30 WHEN 0 THEN cast(clm_sppo as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
ELSE cast(clm_H30 as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)*.65
END
ELSE Null
END AS AccessFeeFinal,
hi,friend
is it possible to use 'select case' statment in sql query.
give any idea or solution.
thanks in advance.
Hi
I am trying to use a global variable in a case when and am not getting the correct results. If I use static data, it works fine.
Here is a tableless example, which should return Shipper. Any ideas are appreciated.
Code:
declare @shipperGBS varchar(3000)
declare @sQuote char
set @sQuote = char(39)
set @shipperGBS = 'ACI,ADO,ALD,AMS,AWB'
set @shipperGBS = Replace(@shipperGBS, ',', @sQuote + ',' + @sQuote)
set @shipperGBS = @sQuote + @shipperGBS + @sQuote
select case when ('ACI' IN (@shipperGBS)) then 'Shipper' else 'Consignee' end as ClientCharge
I have a case statement I need to refer to several times in my select statement and it's quite long. I would like to just refer to if by name. I tried to create a variable for the Case statement (see below) but I get an error that says, "
Sub query returned more than 1 value. This is not permitted when the sub query follows =, !=, <, <= , >, >= or when the sub query is used as an expression."
USE GP05
GO
DECLARE @EmpID nvarchar (6)
SET @EmpID = (SELECT CASE WHEN NOT(dbo.BE010130.EMPID_I IS NULL) THEN dbo.BE010130.EMPID_I
WHEN dbo.BE010130.EMPID_I IS NULL AND NOT(dbo.UPR00500.EMPLOYID IS NULL) AND dbo.UPR00600.EMPLOYID IS NULL THEN dbo.UPR00500.EMPLOYID
WHEN dbo.BE010130.EMPID_I IS NULL AND dbo.UPR00500.EMPLOYID IS NULL AND NOT(dbo.UPR00600.EMPLOYID IS NULL) THEN dbo.UPR00600.EMPLOYID
WHEN dbo.BE010130.EMPID_I IS NULL AND NOT(dbo.UPR00500.EMPLOYID IS NULL) AND NOT(dbo.UPR00600.EMPLOYID IS NULL) THEN dbo.UPR00500.EMPLOYID
END FROM dbo.BE010130 FULL OUTER JOIN dbo.UPR00500 ON dbo.BE010130.EMPID_I = dbo.UPR00500.EMPLOYID AND dbo.BE010130.BENEFIT = dbo.UPR00500.DEDUCTON
FULL OUTER JOIN dbo.UPR00600 ON dbo.BE010130.BENEFIT = dbo.UPR00600.BENEFIT AND dbo.BE010130.EMPID_I = dbo.UPR00600.EMPLOYID)
SELECT @EmpID
I can get around this by simply retyping the case statement when I refer to it in the where clause, but I would prefer not to do this. Can someone point a newbie in the right direction? I have 5 case statements in this query and it starts to look pretty ugly when you have to retype them multiple times.
Thanks!
Hi all
I have two tables I need to Select the record from the First table and insert them into the second table and delete the record from the first table how can i do that with the SQL Statment?
Thank you in advance .....
Regards,
sms
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedHello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies View RelatedI cant find the error in this sql statment. What I want it to do is return everything from book, locations.locationname, and author.fullname. I want to to only return the first 10 rows. This will be used in paging, so, eventually it will be first 10, than 11-20, etc. Heres what I have, without the row limitSELECT RowNum, book.*, locations.LocationName, author.fullname FROM (SELECT book.*, locations.LocationName, author.fullname ROW_NUMBER() OVER(ORDER BY book.id) as RowNum FROM book INNER JOIN Author ON book.AuthorID = Author.ID OR book.AuthorID2 = Author.ID OR book.AuthorID3 = Author.ID OR book.AuthorID4 = Author.ID OR book.AuthorID5 = Author.ID INNER JOIN Locations ON book.LocationID = Locations.ID WHERE (Author.FullName LIKE '%' + @Search + '%') OR (Author.FirstName LIKE '%' + @Search + '%') OR (Author.LastName LIKE '%' + @Search + '%')) as BookInfo
View 6 Replies View RelatedI have two tables. One for videos and one for a "block list"Videos : VideoID UserID VideoURL VideoTitle etc. VideoBlockList :VideoID UserIDI have a datalist to show the videos but i want for the datalist to miss out any videos that a user can not see.So if the block list has "VideoID" = 2 and UserID = 1 if user 1 does a search then the search will skip out the video 2.how is this done? i tryed to do it using a specific / custom SQL statment but it errored cos the NOT value conflicted with the search... any ideas? thanks in advance si!
View 19 Replies View RelatedSelect @ID = top 1 ID From Contents Where Contents.UserID=@UserID And Contents.Status=4 AND Contents.InEdit=1
why it dosn't get back the ID vlaue but when i remove the top1 one its work well why
Hi I have two tablesTABLE 1 named problemas with the field N_problem (numeric)Tabe 2 named resolvidos with the field Resol (numeric)
How can i select all the records from table 1 who are not in Tabe2 ?
Thank you
mario
Does anyone know how to write a statement in SQL Server that is similiar to Microsoft Access's IIF function. Im not quite sure how the syntax works in a SQL Server IF statement. Thanks!
View 1 Replies View Relatedneed help with if statment in a stored procedure
here is what i have and it does not work
Code:
CREATE PROCEDURE Get_ckcompany
@cknum int,
@company varchar
AS
if (@cknum is not null) and (@company is null)
select *
from PMTK_tbl
where Company = @company
else if (@compnay is not null) and (cknum is null)
select *
from PMTK_tbl
where check_Num = @cknum
else
select *
from PMTK_tbl
where Check_Num = @cknum and Company = @company
end if
GO
I have a database used for a point of sale system
it has a main table with the total amount of a check - the tip
the tip is save in a different table that holds payments the issue is i need to make a statement that finds checks based of the total with the tips added. the table that holds tips can have more then one tip because you can have multiple payments on a check.
The statement i have now is like this
select jc.total + sum(jp.tip) as total from jc innerjoin jp on key
where total <= @max and total >= @min
group by jc.total
but this statement uses total before the tip is added. I am not sure how else to do this any help would be great
select zsong.song, zsong.trk
from zsong, zfmt
where zfmt.upc='13117' AND zfmt.muzenbr=zsong.muzenbr
That staement works, but if the UPC code is repeated twice it returns the results twice (i want to only read it once)...
how do i make it only return the first result or the last one or whatever (since they all reference the same thing)
Posted - 06/09/2008 : 11:10:47
--------------------------------------------------------------------------------
trying to run the following script.
use 001
select *
from imitmidx_sql
Get incorrect syntax near 001
If I change the use 001 to Data_58 it works fine. Do I need special syntax when the database name is 001??
Hello All,
I imported a excel file from SSIS and created a table called Lockbox.
To avoid the user from having to change the excel file -it is being imported as is.
I only need 4 fields: [Contract ID] , [Check Number], [Owner ID], [Site ID]
The table I need to import to Transaction has Diffrent Column Names -ex-CustomerID, ResortID.
The columns are in diffrent order.
And I need to add more information into them like UserID = 'Hwells', Trantype = 'MF'
and convert to a diffrent data type [Site ID] to text.
Is their a sql statment that can do this?
SQL2005
Thanks for your time
hi,
I Have a following SP running on sql 2005:-
DECLARE @MONTHNO int
DECLARE @DB CHAR (8)
DECLARE @CR CHAR (8)
SET @MONTHNO = 2
SET @DB = 'DB_'+CONVERT(NCHAR(2),@MONTHNO)
SET @CR = 'CR_'+CONVERT(NCHAR(2),@MONTHNO)
SELECT (acctno),@CR from bmaster
. The table has a 12 field with cr_1 ... to 12
. the sql can’t understand the @cr the column papers "with No column name'
is there any chance to use the follwoing script to add new record to the database
"
rs.addnew
rs.("name")="Scot"
rs.update
"
insted of the old fashion " insert into ...."
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedI have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
Hello, Is there an SELECT statement to just return the last 100 row in my tables? I have about 500 rows in my tables and I only need the info on the last 100 rows.
Thanks
Steve
hello,
i have a page "Picture.aspx?PictureID=4"
i have a FormView witch shows details about that picture and uses a stored procedure with input parameter the "@PictureID" token from query string
the Pictures table has among other rows "PictureID", "UserID" - uniqueidentifier - from witch user the picture belongs to
i have a second FormView on the same page, witch should show "other pictures from the same user" and uses a Stored Procedure
how should i write that stored procedure...frist to take the UserID from the picture with PictureID=4, then to pass it as input parameter and select the pictures witch has as owner the user with that UserID, and if can be done, to avoid showing the PictureID=4 again
a solution should be to add at querry the UserID too, but i want to avoid that
any sugestion is welcomed, please help me
THANKS
Hello, I have three sql select statments I would like to combine into one. I have created a statment that works but I am not sure if it is a good solution performance wise. Is there a better way to run this query?
Thanks Very Much!!
if exists (Select Top 1 snapsht_id, snpsht_flname, site_url, iWidth, iHeight, isFullPage, fp_flname, fp_iWidth, fp_iHeight
From SiteIndex Where update_freq = 0 and nextupdate < GetDate() Order By nextupdate)
Begin
Select Top 1 snapsht_id, snpsht_flname, site_url, iWidth, iHeight, isFullPage, fp_flname, fp_iWidth, fp_iHeight
From SiteIndex Where update_freq = 0 and nextupdate < GetDate() Order By nextupdate
End
else
if exists (Select Top 1 snapsht_id, snpsht_flname, site_url, iWidth, iHeight, isFullPage, fp_flname, fp_iWidth, fp_iHeight
From SiteIndex Where nextupdate < GetDate() Order By importance desc)
begin
Select Top 1 snapsht_id, snpsht_flname, site_url, iWidth, iHeight, isFullPage, fp_flname, fp_iWidth, fp_iHeight
From SiteIndex Where nextupdate < GetDate() Order By importance desc
end
else
Select Top 1 snapsht_id, snpsht_flname, site_url, iWidth, iHeight, isFullPage, fp_flname, fp_iWidth, fp_iHeight
From SiteIndex Order By nextupdate
i have 3 tables in sql the relation between them is one to one
person ==> employee ==> sales_department_stuff&
another relation ( one to one )between
person(the same as above ) ==> customer
i want to put person id in employee not repeated in customer becase all (employee and customer is a person )
sooooooo
i put this sql statment to try to insert person id in employee then in sales_department_stuff table to complet his ordersinsert into Person (Person_Name_Ar,Person_Name_En) values ('aaaaa',' ssssssss')select @@identity from Personinsert into Employee values (@@identity,'1') select @@identity from Personinsert into sales_department_Staff values (@@identity,'1')select @@identity from Personinsert into Driver values (@@identity,'2','2222','1/1/2005','5') /* SET NOCOUNT ON */
RETURN
the first 3 statment is run and success
but underline stetment return error that
he can insert null value in id field ,,,,,,,,,,,,,,,,
he can compile @@identity in these statment ??????????????
plz help me