Using Data Source View In Import Export Package Within Same Solution Is Not Possible ?
Dec 15, 2005
hello ,
I want to download data from an AS/400 to a SQL 2005 Database.
Within Sql server 2000 it was possible to do more than 1 transformation with just 1 source connenction and 1 destination.
In SSIS I have created:
- new solution
- data source
- Data source viewer ( I made named queries to format the data as i want it to be in Sql)
Although it is possible to view the named query data it does not seem to be possible to import the data in the data viewer into my sql 2005 database. (For each dataflow I have to define each query again)
I have added the data source in the connection manager.
Also I am searching to import more than 1 file in 1 package !
I can use however a Dts-2000 package but why then use SQL server 2005
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server. I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard. However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success) - Setting Source Connection (Error) Messages Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed. (SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
I am trying to import an Excel file into SQL Server 2005 using the SSIS import/export wizard; however, Microsoft Excel doesn't show up in the list of the data sources. I am assuming that something else must be install from either Microsoft Office or SQL Server 2005. I am using Microsoft Office 2003 on a Window XP machine. Does anyone know what I need to do to correct this.
I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:
"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.
Additional Information: > Exception has been thrown by the target of an invocation (mscrolib) >> Failed to find or load the registered .NET Framework Data Provider (System.Data)"
It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.
My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.
I need a way to either:
> Default the starting Data Source to be something else > Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for > Not have the wizard crash whenever it defaults to this source.
Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.
Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?
When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"
We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.
We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.
How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?
This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.
Where is a package visible when running the Data Import/Export wizard, choosing to save a package, and choosing "SQL Server" as the location? When I make an SSIS connection in Management Studio I do not see the package under the "MSDB" node.
Running SQL 2008. Trying to copy data from one table into another table using SSIS Import/Export Wizard. Now, when I do a straight "Copy data from one or more tables or views", no problems. But when I use the "Write a query to specify the data to transfer", it will not let me get anywhere.
My source table has a field that is setup as "time". It has data, and no problems with the field. I even replicated my destination table structure exactly. But when I try to use the Import & Export wizard, for that one field I get an error stating the source field is unknown and it is labeled as "-1" instead of "time".
I found a couple of of workarounds. One is to cast the source field "time" as "datetime", and then end up with a "datetime2" field in the destination table. Works, but not what I want to store in that field. Second workaround is to use TSQL and use a "INSERT INTO...SELECT...FROM..WHERE.." statement. This works, and gives me the desired results with all data types being same in source and destination, but is a slight pain in the rear end.
I just want the Import & Export wizard to work. It should work. Why doesn't it know what "time" is? I even checked the MSSQLToSSIS10.XML mapping file the wizard is using. This is what it has for "time":
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1. Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow. Invalid character value for cast specification. Invalid character value for cast specification. Invalid character value for cast specification. Invalid character value for cast specification. Invalid character value for cast specification.
Could you please look into this and guide me Thanks in advance venkatesh imtesh@gmail.com
I want to import a txt file data to a sql server database table, to do this i used sql server import and export wizard. In this when we choose a Data Source, the option Flat file source is not coming up in the combo box in the wizard.
I am using sql server 2005, Management Studio to do this.
steps 1. right click on the database --> all tasks --> import data --> sql server import export wizard --> choose data source dialog box....
I created a package from the SQL Server Import and Export Wizard.I can run this .dtsx file " Import_Table.dtsx " on my local machine no problem, which then executes the package on the remote server of my hosting company.Do they need to install SQL Server on their machine for it to work?Is there some files they can download to make it work?
First post, new to SQL Server, the usual apologies apply ;-)
I used the Import/Export Wizard in SSIS to define a source and target for data migration. I accidentally omitted ticking off a box to force the drop and re-creation of the target table. I can't find any way to edit a package, once I've finished with the wizard! If someone would point me in the right direction, I'd appreciate it.
Hi, I have one package with a complex Control Flow. I need to import a dataflow from another package into it. Cut and Paste is working but it looks like my package corrupts after that. (for example, login to database has problem with authentication now) Is there any import or export tool for this? Regards
I ve created a Import Export Package by right clicking the specified Database and Save it as SQL Server Type thru the wizard and execute immediately , and it works . But I dont know where it get saved and cant able to see so that I could be able run once more. More over I want to schedule the package for that what I have to do ??? Plz help me
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
, Hi In this code how can I create a new data source and new data source view and model and structure that it run dynamic. In this code I have a lot of errors, that they are about server and database don€™t have in current code, In this code, first I should definition server or no?
How can I create data source and data source view and model and structure? Please say code of that, and guide me. databasename and srv is unknown. Do I add other reference with analysis services? Please explain about these codes: ************************************************************************ 1) RelationalDataSource dsNew = new RelationalDataSource( datasourceName, Utils.GetSyntacticallyValidID( datasourceName, typeof(RelationalDataSource)));
I am a newbe at MS SQL 2005, so if this has already been answered elsewhere, please just point me in the right direction.
I have successfully used the Import/Export wizard in "execute immediate" mode to import a table from Oracle 10g to MS SQL 2005. Works like a charm, but when I take the saved pacakge (saved as a *.dtsx server side file) - with no changes to the package and execute it from the either the "dos" prompt or from Windows explorer it fails at the login to Oracle step. Yet when I check the package's "Connection Managers" source connection, all the settings, user-ids and passwords look fine. The package does indeed execute, but I receive an ORA-01017:invalid username/password within the trace file of the package, but nothing has been changed from the Import/Export wizard which ran beatifully, thus verifying the appropriate acccess rights to Oracle.
I have a requirement to create many SSIS packages and no datatransform is required so the BCP task looks a good contender providing it can do both import & export
is it possible to parse the values in bold as package variables into the BCP task. If so how?
BULK INSERT ipcs_wvg.dbo.extract FROM 'D:IPCSextract.csv' WITH (FORMATFILE = 'D:ipcsqueryextract.xml');
Thanks in advance
Dave
I have a global database called ETL Configuration for all my SSIS packages that uses a single table. So I can create three global variables
USE [ETLConfiguration] CREATE TABLE [dbo].[SSIS Configurations]( [ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL, [PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL ) ON [PRIMARY]
I have looked at lots of options to automaticly create SSIS packages and have a hunch that that simple can be better: All these solutions look way to complex to what I want to achieve--
This is a problem that never get solved, sometime I can use other way to avoid it, but havn't found a solution yet, i hope I can get some more idea here.
I am using SQL 2005, when I run
select * into #import1 from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webjeff2.xls', 'select * from [jeff2$]')
I get
Cannot initialize the data source object of OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)".
when I try to compile a SP with that statement in it, I get the same error, like
create stored procedure test
as begin
select * into #import1 from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webjeff2.xls', 'select * from [jeff2$]')
end
so it seems the error may not relate to the real file, since at the compile stage, it should not check the real file?
On my live db, after I restart the SQL service, the statement will work, after a while, one or several days, I get the same error again. I can not restart my live db quite often for sure, so now I have another backup db server, I need run the statement on the backup server and then read the data from there.
I have the same problem at two places, both use SQL 2005.
So far there are three questions
1, why it works after restart, but only last for a while? something about memory? since the backup db seldom need restart and work fine after many days.
2, why it gives error in compile stage?
3, why two dbs in different Enviroment has the same problem
The most answer I have gathered so far is permission issue, true I got similar error if the import file is located in a place which SQL has no right to access. But in this case, it should not be.
hi everybody, i want to create data source and data source view for data mining, with using C Sharp. i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully, and have i build data source and data source view, how to do it.?
I have Data Flow task that contains 50 components.
My computer configuration: 1 GB RAM Microsoft Windows Server 2003
Periodicaly when i try to save package after making some changes Out of memory ... exceptions message box appears , and soon after this Not fatal error occurs ... message box shows . If i close solution and open it again all my 50 components disappears --instead I see clear list, and all my work losen.
Such "Not fatal errors" making hell out of job -- every time I need to change package i must add package to archive!!!
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Hi I am using CSV (comma delimeted file) for exporting data from sql server table to CSV and then import to sql server from the CSV. Now I have a problem, I could sucessfully export the data to CSV, but one of the field which has whole html for each product is giving me problem, It wouldnt save in one cell as for other data items in a record are. If I remove that field, the rest of records are exported okay, but with this one, it do export, but the data wouldnt go to one cell of the excel file and hence wouldnt work in importing to sql. I guess some tags in the string is creating problem plus also what should I do if the string already have comma as data, and we use comma as delimiting character. Any kind of help greatly appreciated
EDIT: Below is a sample of html thats already saved in one field but wouldnt come to one excel cell when exported to CSV... <P><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>Product</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD width="46%"><STRONG>XXXX</STRONG></TD><TD width="54%">XXXX </TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>up to 4MB/s</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX<TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR></TBODY></TABLE><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>XXXXX</STRONG></TD><TD>XXXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX</TD></TR></TBODY></TABLE><A href="http://www.xxx.xxx" target=_blank><BR><BR>xXXX</A><BR><BR>Â </P> Regards Mykhan
Hi every body I have 2 databases called Tax and News There is a table in database Tax called table table1(id, Title,Content) There is a table in database News called table table2(id, Headline,Body) How can I copy(append) data from table1 to table2 with mapping Title -> Headline and Content -> Body Any answers would be appreciated.
Hi Everyone.. I want to import and export sql tables to dbase IV or any other format..But i want to run DTS Wizard from inside VB6.. IS it possible .. or if you guys know some other method to import and export tables in which i can provide the choice to transfer into any other format..please let guide me i'll be obliged.. Tahir
I am trying Express Edition 2005 but could not found GUI init, can someone advsie that which SQL Server 2005 provides GUI and which one is more friendly to import/export data- thanks
I'm trying to import data from a xml file (several tables inside) into sql tables.
- In the xml source, I choose the xml and xsd files and I see all tables perfectly.
- Drag the xml source output to Sql Destination input, choose one table to import and create the sql table
- I execute the task and it concludes ok
- In Execution Results window appears as warnings as fields of each one other tables (giving information about this fields are not used at the process and it'll be better removed it in order to increase performance), no errors and success task. The problem is that no one data is imported into sql destination (wrote 0 rows).
Process window:
Information: 0x4004300A at OPP, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at OPP, DTS.Pipeline: The output column "field_1" (66374) on output "TABLA1" (50424) and component "XML Source" (27281) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at OPP, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at OPP, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at OPP, DTS.Pipeline: Execute phase is beginning.
Information: 0x40043008 at OPP, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at OPP, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at OPP, DTS.Pipeline: "component "SQL Server Destination" (20427)" wrote 0 rows.
SSIS package "package.dtsx" finished: Success.
The program '[408] package.dtsx: DTS' has exited with code 0 (0x0).
If I import data of xml file from access, I haven't any problem. All tables are imported
Im using the sql import/export features to transfer a database from one server to another. For some reason when I am transfering tables with primary keys when I look at the new database on the other server it doesnt seem to hold the primary key info. Can anyone tell me why and how i can preserve this info so I dont have to go back through and reset this info.
How to refresh table data on sqlserver without dts or backup/restore whole database. In sqlserver, is there a way to import table(s) data (like import export in oracle) in a file and export to another unconnected server/db.
Greetings All, I need to export/import the ASP.NET Membership data which is installed in my database via aspnet_regsql.exe. Does anyone have the Cliff notes on how to do this?
