Hi everyone I am having some query trouble using a DateTime field in a WHERE statement. Basically, I have a field which holds a DateTime value and want to delete records that are greater than that value inside the DateTime field. For example:
DELETE FROM Table1 WHERE JobDateTime > 01/02/2008 12:00:00
Is this possible? I get the following error when trying to do this:
Code Snippet
Incorrect syntax near '12:00:00'.
Appreciate the help. Regards, Onam
however, it fails when i try to insert the value 0000-00-00 00:00:00. ie., the following insert statement fails
INSERT INTO TEST VALUES('0000-00-00 00:00:00')
The error thrown is,
Server Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value. The statement has been terminated.
I have a datetime format that comes in 'yyyy-mm-dd hh:mm:ss.nnn'
But I only want 'yyyy-mm'
I am not sure how to correctly write the select statements. Below is what I have..
How would I do this, so the datetime result is 'mmmm-yy' ....
SELECT [RecordingDate], [RecordedUserID], [CombindedPercentieScore] FROM [dbo].[scoringsummary]
WHERE convert(varchar(7), [RecordingDate],120) between convert(varchar(7), DateAdd(dd,-180,GetDate()), 120) AND convert(varchar(7), DateAdd(dd,-1,GetDate()), 120)
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
Hi, I'm inserting a datetime values into sql server 2000 from c#
SQL server table details Table nameate_test columnname datatype No int date_t DateTime
C# coding SqlConnection connectionToDatabase = new SqlConnection("Data Source=.\SQLEXPRESS;Initial Catalog=testdb;Integrated Security=SSPI"); connectionToDatabase.Open(); DataTable dt1 = new DataTable(); dt1.Columns.Add("no",typeof(System.Int16)); dt1.Columns.Add("date_t", typeof(System.DateTime)); DataRow dr = dt1.NewRow(); dr["no"] = 1; dr["date_t"] = DateTime.Now; dt1.Rows.Add(dr); for(int i=0;i<dt1.Rows.Count;i++) { string str=dt1.Rows["no"].ToString(); DateTime dt=(DateTime)dt1.Rows["date_t"]; string insertQuery = "insert into date_test values(" + str + ",'" + dt + "')"; SqlCommand cmd = new SqlCommand(insertQuery, connectionToDatabase); cmd.ExecuteNonQuery(); MessageBox.Show("saved"); } When I run the above code, data is inserted into the table The value in the date_t column is 2007-07-09 22:10:11 000.The milliseconds value is always 000 only.I need the millisecond values also in date_t column. Is there any conversion needed for millisecond values?
Hi all, having a little problem with saving dates to sql databaseI've got the CreatedOn field in the table set to datetime type, but every time i try and run it i get an error kicked up Error "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."I've tried researching it but not been able to find something similar. Heres the code: DateTime createOn = DateTime.Now;string sSQLStatement = "INSERT INTO Index (Name, Description, Creator,CreatedOn) values ('" + name + "','" + description + "','" + userName + "','" + createOn + "')"; Any help would be much appreciated
Hey :)I'm facing a lot of troubles trying to create a new pause/break-system. Right now i'm building up the query that counts how many records that is inside 2 fields. Let me first show you my table: ID (int) | stamp_start (Type: DateTime) | stamp_end (Type: DateTime) | Username (varchar)0 | 17-03-07 12:00:00 | 17-03-07 12:30:00 | Hovgaard The client will enter a start time and a end time and this query should then count how many records that are inside this periode of time. Example: The client enter starttime: 12:05 and endtime: 12:35.The query shall then return 1 record found. The same thing if the user enters 12:20 and 12:50.My current query looks like this:SELECT COUNT(ID) AS Expr1 FROM table WHERE (start_stamp <= @pausetime_start) AND (end_stamp >= @pausetime_end)But this will only count if I enter the exact same times as the one inside the table.Any ideas how I can figure this out?Thanks for your time so far :)/Jonas Hovgaard - Denmark
Hi, I have a column of type datetime in sqlserver 2000. Whenever I try to insert the date '31/08/2006 23:28:59' I get the error "...datetime data type resulted in an out-of-range datetime value" I've looked everywhere and I can't solve the problem. Please note, I first got this error from an asp.net page and in order to ensure that it wasn't some problem with culture settings I decided to run the query straight in Sql Query Anaylser. The results were the same. What else could it be? cheers, Ernest
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
Nothing difficult, I just need a way to generate a new datetime column based on the column [PostedDate], datetime. So basically I want to truncate the time. Thanks a lot.
select convert(datetime,'04-20-' + right(term,4)) as dt, 'Deposit' as type, a.* from dbo.status_view a
where right(term,4) always returns a string which constitutes a 4 digit year eg '1999','2004',etc.
The SQL above returns
2004-04-20 00:00:00.000 Deposit ...
Which makes me think that it is able to successfully construct the datetime object inline. But then when I try and do:
select * from ( select convert(datetime,'04-20-' + right(term,4)) as dt, 'Deposit' as type, a.* from dbo.status_view a ) where dt >= a.submit_date
I get the following error:
Syntax error converting datetime from character string.
Given that it executes the innermost SQL just fine and seems to convert the string to a datetime object, I don't see why subsequently trying to USE that datetime object for something (in this case comparison with submit_date which is a datetime in the table a) should screw it up. Help!!! Thanks...
Hi,I have a text file that contains a date column. The text file will beimported to database in SQL 2000 server. After to be imported, I wantto convert the date column to date type.For ex. the text file look likeName dateSmith 20003112Jennifer 19991506It would be converted date column to ydm database in SQL 2000 server.In the table it should look like thisName DateSmith 2000.31.12Jennifer 1999.15.06Thanks in advance- Loi -
hi, How do i convert a varchar field into the datetime data type? the reason i need this lies in the requirement that in the earlier data base the column that is hlding the date value is having the data type as varchar. and in the new design the column data type is datetime. i am using sql scripts for the data migration from the older design to the newer and got stuck with this datetime convertion issue. do let me know the best possible solution.
following are the sample data that is theer in the older table for the date.
12/12/2003 1/13/2007 01132004 1-1-2004 1.2.2001
there is no uniformity of the data that is stored currently.
I have a table that has a unique ID and a datetime of when something changed.
See example: IDÂ Â Â TimeStamp 16094Â Â Â 2013-11-25 11:46:38.357 16095Â Â Â 2013-11-25 11:46:38.430 16096Â Â Â 2013-11-25 11:46:38.713 16097Â Â Â 2013-11-25 11:46:38.717 16098Â Â Â 2013-11-25 11:46:38.780
[Code] ....
Is there a way I can calculate the difference between row 16106 and 16105 and enter it in line 10601.
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
Hi All,This is only my second day using C#/asp.net and English isn't my native language so I'll apologise in advance if this question doesn't make sense and/or is stupid . I'm trying to make a little event planner which was going well until I hit a small problem, the user needs to enter the event name and choose a date/time from dropdowns, this bit works okay... however I'm having difficulties with storing the date/time, at the moment I'm making a DateTime object and filling out the year/month/day/hour/minute selected on the form and adding that to the database field (which is a datetime field type).Problem is, I'm using the date format DD/MM/YYYY HH:MM:SS but the database stores it as MM/DD/YYYY HH:MM:SS so if I wanted to do things like: select * from tbl where date > DateTime.Now - it isn't going to work because the month is switched with the day in the DB-versions. Just to try and give another example, if I'm not being very clear, if I print DateTime.Now.ToString() it will display 10/06/2008 02:50:48 however if I put it into the database and pull it back out cast to a DateTime Object and then display that object via ToString() it'll be 06/10/2008 02:50:48 Any suggestions on what to do would be appreciated, usually in cases like this I'd just use the unix timestamp, but since C#/ASP.NET doesn't support that natively I was hoping there was an easier/native alternative. Also I don't have access to the server configuration so changing the localization of mssql isn't an option unfortunately.Thanks in advance!
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' FROM myTables WHERE Conditions are true ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' INTO AuxiliaryTable FROM myTables WHERE Conditions are true ORDER BY Field01 SELECT DISTINCT [Field02] FROM AuxTable The the results are:
Field02
----------------------
22810 8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760 22810
Is there any good suggestion? Thanks in advance for any help, Aldo.
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename] SET [No] = CASE WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa' ELSE 'Null' END
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E
can any one help me in this? please give me a sample query.