Using Hierarchy ID Data Type In Material Database
Nov 10, 2014How to use hierarchy id data type in Bill of material database.
The msdn example [URL] ....
How to use hierarchy id data type in Bill of material database.
The msdn example [URL] ....
I have 2 tables each containing a material type. Table 1 contains material from their 3D application. Table 2 contains material with specific values that is not ours and we cannot rename or edit the data. I need a type of junction or mapping table that can connect the user material to the preset material. for example:
User Material = Wood-MDF
Preset Material = MDF Panel
I figured that i would make this table with 3 fields (ID, UserMaterialID, PresetMaterialID).How would i then construct a query view / Stored procedure that would return the Preset data values based on the user material id?
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
How do I upload test data from a frame maker database to SQL database tables using ODBC.
View 6 Replies View RelatedHello guys, I am a hobbyist programmer and now that I have started asp.net, I was wondering about the correct way to enter data into a table. For example, i have a table called players with a field called status. What should I code the status as? "Active" or "Retired" or 1 and 0? I thought using 1 and 0 would be better as far as database size, but it is pretty difficult to understand how to modify the gridview. I come from PHP and everything is a lot more accesible there as far as modification of output. Thanks in advance!
View 3 Replies View RelatedI am trying to delete the row with the minimum date. First I read in the minimum date using:
OleDbCommand myCommand = new OleDbCommand("SELECT MIN(Date) FROM 30_Day_Data", myConnection);
myCommand.ExecuteNonQuery();
OleDbDataReader myReader = myCommand.ExecuteReader();
This then gives me a date in the format "1/2/2008 12:09:33 AM". Since that is the minimum date, I need that row deleted, so I use:
OleDbCommand myDeleteCommand = new OleDbCommand("DELETE FROM 30_Day_Data WHERE Date='" + "myReader().GetValue(0).ToString()" + "'", myConnection);
myDeleteCommand.ExecuteNonQuery();
This gives me an error saying "Data type mismatch in criteria expression". I have no idea how to format the date so that it can get deleted. I have tried nearly everything with no success. Any help is appriciated.
Thanks!
Ross
How can I get the data from a table that stores hierarchical information keeping the right order and hierarchy levels?
I also need to specify a first level....let me explain.
Table: Sites
Id (PK)
Title
Url
ParentId
If I have something like this:
1 | Test | http://localhost | NULL
2 | Sub-Test | http://localhost/subtest | 1
3 | SecondItem | http://anotherServer | NULL
4 | ChildOfSub-Test | http://localhost/subtest/child | 2
And I specify that I want all child items below the Id 2, it must return:
Id | Title | Url | ParentId | Depth
2 | Sub-Test | http://localhost/subtest | 1 | 0
4 | ChildOfSub-Test | http://localhost/subtest/child | 2 | 1
How can I do this? I've saw some examples with CTEs, but they always return all of the items.
Hi,everyone.
I have defined a data type "OC_BUN_NAME" in database "CVPRO". I want to create a table tempdb.dbo.CVPRO in SQL SERVER 2005 system Database tempdb. But SQL SERVER 2005 DBMS gives a Error Messages:"Can not find the data type OC_BUN_NAME".
How can I do? How to use data types in the other database?
Please give me some advice. Thank you in advance.
I want change all field in database to new datatype.I want change data from Small Integer to Integer but there are the relation in each table.
View 3 Replies View RelatedHello:In my SQL Server databases I have complex related tables and views.There is any tool which allow you to see (print) this complex hierarchy ofviews and tables as hierarchical tree?Thanks,GB
View 3 Replies View RelatedMy problem is that my:hustyp)[1] only fetches the first occurace of this tag. In my xmlfile this field is a repeating table created in infopath 2007. How do I manage to get the rest dynamically.
------XML-file---------------------------------------
<my:group1>
<my:group2>
<my:hustypTF>5</my:hustypTF>
</my:group2>
<my:group2>
<my:hustypTF>6</my:hustypTF>
</my:group2>
<my:group2>
<my:hustypTF>7</my:hustypTF>
</my:group2>
</my:group1>
-----------------------------------------------------
------T-SQL for fetching data from XML datatype------
WITH xmlnamespaces('http://schemas.microsoft.com/office/infopath/2003/myXSD/2007-01-15T13:29:33' AS my)
SELECT FormData.value('(/my:xxx/my:Formular/my:group1/my:group2/my:hustyp)[1]', 'varchar(99)') AS IdFastBet
FROM MinaDekl
CROSS APPLY FormData.nodes('(/my:xxx/my:Formular/my:group1/my:group2/my:hustyp) as TempTab(testTab1)
-----------------
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedHi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
Is there a way to query all the columns in a database that have the data type as Integer.
View 9 Replies View RelatedI need to create a dimension with a hierchy derived from 3 other dimenions where one of the dimensions contains a recursive hierarchy.
eg:
In my RDBMS I have; a table "Entities" which contextualises geographic locations and (typical columns include and id and a description with values for: ID1=United Kingdon, ID2=France, ID3=Norway, ID4=Finland, ID5=Europe, ID6=Scandinavia, etc.), another table "Entity_Type" which contextualises the values held in "Entities" (Typical olumns; ID1=Continent, ID2=Country) and a table, "Geo_Code" which codifies the values from both "Entities" and "Entity_type". They act more or less like 2 dimensions ("Entities", Entity_Type) and a fact table ("GEO_Code").
The third table has a recursive hierarchy in that it references it's own ID again in column "Entity Reference".
The first table is Entities, the second is Entity_Type and the third is the one that references both.
id
description
01
England
02
Norway
03
Europe
04
Scandinavia
id
description
01
Continent
02
Country
id
entity
Entity_Type
entity Reference
01
03
01
NULL
02
04
01
NULL
03
02
02
02
04
01
02
01
From the last table "GEO_CODE" we can determine the following:
01. Europe is a continent
02. Scandinavia is a continent
03. Norway is a Country that is in Scandinavia (Entity Reference recursive referencing ID 02 of the same table where the Entity is 04).
04. England is a Country that is Europe (Entity Reference recursive referencing ID 01 of the same table where the Entity is 03).
How do I create a new dimension using Visual Studio in Analysis Services where the Hierarchy is reflected?
So far, I have managed to depict 2 Hierarchies: where a dimenion depicts Entity (Countinent/Country) as level 1 and the value of the corresponding entity (Europe, ENgland, Norway, Scandinavia) in level 2 but how do I get to the last bit where the Entity Reference references the location of the Country or Continent???
Hi,
I like to get data from a signle table and arranged in hierarchical(hierarchy) order. What will be my sql script to be able to get the desired result shown below? Please include some explanation as too what script is doing..
Table Structure and Sample Data
Id ParentId Name Code DisplayOrder
1 null Group 1 G00001 1
2 null Group 2 G00002 2
3 1 Sub-Group 1 SG0001 1
4 2 Sub-Group 2 SG0002 1
5 3 Sub-Sub-Group 1 SSG001 1
6 null Group 3 G00003 3
7 3 Sub-Sub-Group 2 SSG002 2
Desired Result
Id ParentId Level Name ExtendedName DisplayOrder
1 null 1 Group 1 Group 1 1
3 1 2 Sub-Group 1 Group 1 -> Sub-Group 1 1
5 3 3 Sub-Sub-Group 1 Group 1 -> Sub-Group 1 -> Sub-Sub-Group 1 1
7 3 3 Sub-Sub-Group 2 Group 1 -> Sub-Group 1 -> Sub-Sub-Group 2 2
4 2 2 Sub-Group 2 Group 1 -> Sub-Group 2 1
2 null 1 Group 2 Group 2 2
6 null 1 Group 3 Group 3 3
NOTE: I apologize to anyone (especially moderators) who may notice that I am basically repeating a question that was already posted by me in another recent thread. The reason why I am reposting is because I want to filter my question down to its crux because the other question may not have been asked in the most clear way.
The Question:
The sceanrio is this.
(1) I have a sales person dimension with a hierarchy.
(2) In this hierarchy, Bill and Ted roll up to John.
(3) Bill sells 10 units, Ted sells 8 units, and John sells 5 units.
When you process this hierarchy, what would you expect the total to be for John?
(A) 23, which is the sum for Bill, Ted, and John
or
(B) 18, which is the sum of Bill and Ted only and overwritting John's number
I say (A) and I think most will choose the same, and all the examples I've been reflects (A).
However, in my simple cube I get (B).
Is there a setting I need to adjust to get (A)?
How can I create a function that returns hierarchical data from a table with this structure:
- CategoryID
- CategoryName
- CategoryFather
I want to bring the result set like this...
CategoryID | CategoryName | CategoryFather | HierarchicalLevel
1 | Video | 0 | 0
2 | DivX | 1 | 1
3 | WMV | 1 | 1
4 | Programming | 0 | 0
5 | Web | 4 | 1
6 | ASP.Net | 5 | 2
7 | ColdFusion | 5 | 2
How can I do this? Does anybody has a sample code? I need this on SQL Server 2000 and if it's possible (but not too necessary) in SQL Server 2005.
Thanks.
Hi,
I am using VS2005 C# + sql server 2005 Express edition.
I need to using a database that uses my own defined data types to define its tables columns.
I already have designed a Database projact and create the new UDT as follows:
Create a new Database project in the Visual C# language nodes.
Add a reference to the SQL Server 2005 database that will contain the UDT.
Add a User-Defined Type class.
Write code to implement the UDT.
Select Deploy from the Build menu.
Now I need to ask some quistions:
1- When I try to add a new query to a table that contains my new data type in its columns,if I try to exexute the query the next message appears:
'Execution of user code in the .Net framework is disabled. Enable "clr enabled" configuration option'.
How can I doing that??
2- I need to use that database - which has the new data type - in a traditional ' Visual C# Windows Application' instead of 'Database', but:
when I try to add a new Data Source that contains the tables that have the new data types in its definitions, the next message appears:
'<AyaDatabase.dbo.MyNewUDTTable>
User-defined types(UDTs)are not supported in the Dataset Designer.'
So, how can I resolve that problem??
please help me.
Thanks in advance for any help.
Aya.
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedI have one table Emp_MAster with two column ID-Sup_Id. I need to create a table where i can store data link this
Id-Hreid
Only difference is that I need to store data in an hierarchy view so Emp 1 is reporting to Emp2 and Emp2 is reportign to Emp3 so in new table I should get
Emp3-Emp2
Emp3-Emp1
Emp2-Emp1
Out of nowhere my derived hierarchies starting showing the following message in the MDS UI
No Level Defined:Â This Derived Hierarchy is incomplete......
As you can see below the structure is defined and still in tact. This message shows up in by the Explorer & System Admin areas. I'm also able to query the subscription view setup without any issue.
This is with 2012 w/ no CUs. Same setup in running in another environment without issue.
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View Related I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
I have a time dimension which has Date, Week, Month and Year. However, the hierarchy will have only Week, Month and Year. It works great for any Sales measure with AggregateFunction as SUM.
I have created a new measure with AggregateFunction = LastNonEmpty. Also in the backend, I have pushed all the inventory data to last date in every month as inventory is always looked on a monthly basis not on a weekly basis. This measure shows correct data for every last week of the month in the hierarchy. However, Months and Years are displayed as zeros.
what I am doing wrong.