Is there a way to use a parm in the 'IN' of a where clause?
Example (integerValue is an int datatype):
declare @list as varchar(max)
set @list = '1, 2, 3, 4'
select *
from table1
where integerValue IN ( @list )
Hi
I've got the following code that uses OPENROWSET but I need to paramaterise the filepaths and its not working:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
BEGIN
declare @dataareaid as varchar(3)
declare @configpath as varchar(100)
declare @configfile as varchar(100)
declare @configformatfile as varchar(100)
set @configfile = 'C:ConfigFileConfigFileMot.txt'
set @configformatfile = 'C:ConfigFileConfigFormatFile.txt'
print @dataareaid
print @configpath
print @configfile
print @configformatfile
set @dataareaid = (SELECT dataareaid
FROM OPENROWSET( BULK @configfile , FORMATFILE = @configformatfile
) AS a)
select *
FROM AX.[P2].dbo.Dimensions Dim
WHEREDim.dataareaid = @dataareaid
END
I'm executing a stored procedure from an Execute SQL Task in my SSIS package. The procedure takes two input variables and creates and executes an SQL statement based on those variables. I don't have it set to return anything.
When I run the package in debug mode on my desktop, it runs just fine.
However, when I save it to the RDBMS and execute it as a step in a job, the stored procedure errors out because it doesn't receive the input parameters. If I replace the ? in the statement with the value I know the parm should have, it executes just fine. The parms are mapped to the 0 (and, where applicable, 1) input parms.
As an aside, the package variable supplying the value is a byte value. However, in the parm mapping for the step, I define it as varchar because that's what the stored procedure is expecting. Could this be goofing me up?
I'm want to pass empty parm value to a stored procedure. I'm new at this stuff and not sure how to do this. To make it work I can put values in parms and it works great. I don't want to populate some of the fields in the table with values. The fields are cnty,dist,beat,convertedkey. Anyone know how I can get it done? Code below. Thanks for your help!
int shift = Convert.ToInt16(dr.Cells[1].Value.ToString());
int prior = Convert.ToInt16(dr.Cells[2].Value.ToString());
string lname = Convert.ToString(dr.Cells[3].Value.ToString());
string fname = Convert.ToString(dr.Cells[4].Value.ToString());
string unit = Convert.ToString(dr.Cells[5].Value.ToString());
string handle = Convert.ToString(dr.Cells.Value.ToString());
int badge = Convert.ToInt16(dr.Cells[7].Value.ToString());
string cnty = Convert.ToString('1');
string dist = Convert.ToString('1');
int beat = Convert.ToInt16(1);
int convertedkey = Convert.ToInt16(1);
char action = 'I';
char assign = 'Y';
var db = new dpoffassignedDataContext();
var q = db.SP_DpAssignAllOfficers(action, convertedkey, shift, prior, lname, fname, unit, handle, cnty, dist, beat, badge, assign);
Stored procedure below;
ALTER PROCEDURE SP_DpAssignAllOfficers
(
@action nvarchar(1),
@int_id int,
@shift int,
@prior int,
@lname nvarchar(20),
@fname nvarchar(20),
@unit nvarchar(5),
@handle nvarchar(10),
@cnty nvarchar(10),
@dist nvarchar(10),
@beat int,
@badge int,
@assign char
)
AS
INSERT
INTO dpofficers(dpo_prior,dpo_lname,dpo_fname,dpo_unit,dpo_handle,dpo_cnty,dpo_dist,dpo_beat,dpo_badge,dpo_shift)
VALUES (@prior,@lname,@fname,@unit,@handle,@cnty,@dist,@beat,@badge,@shift)
In SSIS, I have an Execute SQL Task that runs a direct SQL statement as follows to update an MS/SQL database table:
Update auditTable SET PackageName = @pkgname
In the parameters mapping, @pkgname is mapped to the System variable System::PackageName (as input).
This task runs fine if I use ADO.NET as the data source without any error.
But if I use OLEDB as the source it fails miserably and requires that the @pkgname variable be defined (as if it's a user variable, when in fact it was intended as a parm for the update statement only).
Any idea why that happens?
Thanks
Tommy
I have a problem in calling a procedure.
It has two input parameters and seven(7) output parms.
When I run it this way:
exec usp_List_Relationship_Users @relationship_id = 1851 ,
@status = 'Channel Member',
@cust_idOUTPUT,
@user_login_id OUTPUT,
@username OUTPUT,
@password OUTPUT,
@status_id OUTPUT,
@sdesc OUTPUT,
@administrator OUTPUT
I get this error:
Server: Msg 119, Level 15, State 1, Line 10
Must pass parameter number 3 and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'.
But when I run it this way :
exec usp_List_Relationship_Users 1851 ,
'Channel Member',
@cust_idOUTPUT,
@user_login_id OUTPUT,
@username OUTPUT,
@password OUTPUT,
@status_id OUTPUT,
@sdesc OUTPUT,
@administrator OUTPUT
I get the expected results. Why should I omit the name of the name of the input parameters? I don't know why I am getting this error if don't run by ommitting the name of the input params.
Any help regarding this matter is greatlt appreciated.
You can assume that all the variables are declared prior to executing the stored procedure.
Regards
Sushruth Nanduri.
I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.
I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:
/CONFIGFILE "C:myconfig.dtsConfig.
In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.
@[User::PackageToRun] + " /CONFIGFILE C:\myconfig.dtsConfig ".
How does one add additional CL values during the runtime for Execute Package Task?
Thanks,
Anatole
I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?
I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....
I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.
Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View 3 Replies View RelatedI am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following.
When on SQL Server 2000 the following statement ran without issue:
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
GROUP BY TrackID
HAVING MAX(LegNum) = 1 AND
TrackID + 'x1' IN
(
SELECT
dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
)
Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time.
I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same?
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
WHERE TrackID + 'x1' IN
(
SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
GROUP BY TrackID
HAVING MAX(LegNum) = 1
)
2 examples:
1) Rows ordered using textual id rather than numeric id
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id
Result set is ordered as: 1, 11, 2
I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
Hi,
What is HAVING clause equivalent in the following oracle query, without the combination of "GROUP BY" clause ?
eg :
SELECT SUM(col1) from test HAVING col2 < 5
SELECT SUM(col1) from test WHERE x=y AND HAVING col2 < 5
I want the equivalent query in MSSQLServer for the above Oracle query.
Also, does the aggregate function in Select column(here the SUM(col1)) affect in anyway the presence of HAVING clause?.
Thanks,
Gopi.
How Can I use Top Clause with GROUP BY clause?
Here is my simple problem.
I have two tables
Categories
Products
I want to know Top 5 Products in CategoryID 1,2,3,4,5
Resultset should contain 25 Rows ( 5 top products from each category )
I hope someone will help me soon.
Its urngent
thanks in advance
regards
Waqas
hi..
i have basic question like
what is differance between conditions put in ON clause and in WHERE clause in JOINS????
see conditions that shown in brown color
select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)
select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ImplicitID = d1.ImplicitIDAND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)
another thing...
if we put AND d1.ImplicitID = d1.ImplicitID condition in second query then shall we remove
d1.ImplicitID >= d2.ImplicitID from WHERE clause????
Hi everyone,
I saw some queries where SQL inner join clause and the where clause is used at the same time. I knew that "on" is used instead of the "where" clause. Would anyone please exaplin me why both "where" and "on" clause is used in some sql Select queries ?
Thanks
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View 5 Replies View RelatedHey guys, I'm a bit weak when it comes to doing ands and or's. I know what i want, but when I put it into statement, i dont get the results that i want.
I have 3 fields in my where clause. ID, LW, and LWU. The code is as follows:WHERE (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID NOT LIKE '%6%') AND (ID NOT LIKE '%7%') AND (ID NOT LIKE '%8%') AND (LW <> 1) AND (LWU <> 'test') OR (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID IS NULL) AND (LW <> 1) AND (LWU <> 'test')
I have a range of dates that I want to grab, in there I do not want any records where ID has 6,7,8 and I only want records where LW does not equal 1. UP to this point, it works fine. I get all the records that only return these values. However, the moment I add where LWU does not equal 'test'. it does not return the values I want. Furthermore, why can I not put this whole string into one and clause? I never understood why I had to create a second line following OR. the longer this query gets the more I get confused. Any help?
I have an insert statement that reads:
SELECT AppointmentID, PatientNo, PatientSurname, PatientForename, ConsultantName, HospitalName, Date, CONVERT (varchar, Time, 8), AppointmentStatus FROM [Appointment] WHERE ([AppointmentId] = @AppointmentId)
I also need to add another WHERE clause. This clause will mean that if the date is within 14 days of the actual date it will not ba able to be selected need help writing this not sure how to write it
Thanks in advance Mike.
I'm having a heck of time with this where clause. I have a table that contains client addresses, a client can have more than one address. So some of the addresses may be seasonal. I need to return only the current address based on a flag MailTo (bit) and a date range, just the month and day, the start and end are datetime datatypes.
Here is what i have tried:
I would really would like it to work on a range of month and day based on the startdate and enddate fields and the MailTo flag.
The table looks like this;
tblClientAddresses:
Address_ID,Client_ID,Address,Address2,City,State,Zip,Country,AddressType,StartDate,
EndDate,MailTo
WHERE (A.MailTo=1) AND (A.EndDate Is Null OR DatePart(mm,A.Enddate) >= DatePart(mm,GETDATE()) AND DatePart(dd,A.Enddate) >= DatePart(dd,GETDATE()))
Thank you for any help!
Hi,
I am working on a project involving text searching. I created a fulltext catalog on the database and scheduled it for every one minute. I created a fulltext index on a table and added some columns. I scheduled it as the database catalog. I ran a simple query like this in the query analyzer but got an error message that the catalog does not exist!
SELECT * FROM tbl_extra_skills WHERE CONTAINS(ITSkills, 'Word')
What am I doing wrongly?
I'm trying to do a simple ... SELECT ... FROM .... WHERE ... LIKE clause and i think my syntax is off. WHile using sql server ...... is the syntax
Where Name LIKE '%variable%' ??????
Or should I be using something differnent. Thank you in advance for any help.
hi alli need to create a sql statement that receives some values - my doubt is only about how to build that sql statementi've heard something about IN clause but could not apply it - could someone give any sample?First page: I have a textbox with some emails e.g. a@a.com, b@b.com, c@c.com etcSecond page: SELECT * FROM Table1 WHERE Field = ... IN ???thanks in advance
View 1 Replies View RelatedHello,
I would like to create a "where in" clause on the fly. For example, if a user types into a text box three email address separated by a comma, I can not do a select on them because they are not strings - (adam@homebusiness.to, wanshark1@yahoo.com, test@test.com) <--- They should be ('adam@homebusiness.to', 'wanshark1@yahoo.com', 'test@test.com') Is there a sql function that tells the server that the stuff in parenthesis is a string? Thanks
we trying to use a UDF in Where Clause. This is taking too much of time. when we replaced the UDF with a subquery the query is fast.
Eg:
select Name, Designation, Address From Employee Where dbo.GetAge(EmpId) > 25
This is taking very long to fetch 12 records from 22,00,000 records.
When the same query has been converted to
select E.Name, E.Designation, E.Address From Employee E Where (select datediff("YY", EP.DOB, GETDATE()) from EmpPersonaldetail EP where EP.Empid= E.EmpId)
this gets executed very fast.
What could be the reason?
Pls help.
Hi,
I'm desperatly trying to make a query (inside a stored procedure which handles diferent tables and columns for each time) on which I have a variable as the table name. The problem is that I cant make it with the variable. What I need to do is something like this:
select @max_value=MAX(COL_NAME(@tableID,@columnID))
from (and here is my problem) @table(or @tableId or something :confused: )
I already tried with OBJECT_NAME but i can't do it, and there's no way i can know the table's name 'cause the idea is to perform the procedure to several tables.
Thanks in advance,
Trillium
I have a 3rd party app which generates the following in it's where clause. COnsidering all the ROJ's on this table, would it not be better to put the definitive part
"AND pe.enc_id = '8E487A58-E53A-42B3-8D0E-07AA1BE2E5E5'" before the joins, or does it really make a difference?
WHERE physical_exam_.enc_id =* pe.enc_id AND
immunization_mast_.enc_id =* pe.enc_id AND intk_trnf_master_.enc_id
=* pe.enc_id AND vital_signs_.enc_id =* pe.enc_id AND
med_sys_rev_.enc_id =* pe.enc_id AND tb_isolation_.enc_id
=* pe.enc_id AND zinmate_encounter_.enc_id
=* pe.enc_id AND intk_trnf_master8_.enc_id =* pe.enc_id AND pe_head_neck_.enc_id
=* pe.enc_id AND pe_eye_exam_.enc_id =* pe.enc_id AND pe_ears_.enc_id
=* pe.enc_id AND pe_throat_.enc_id =* pe.enc_id AND pe_skin_.enc_id
=* pe.enc_id AND pe_cardio_.enc_id =* pe.enc_id AND
pe_musculoskeletl_.enc_id =* pe.enc_id AND pe_neurological_.enc_id
=* pe.enc_id AND pe_breast_.enc_id =* pe.enc_id
AND pe_lymph_new_.enc_id =* pe.enc_id AND pe_abdomnl_.enc_id
=* pe.enc_id AND pe_male_.enc_id =* pe.enc_id AND pe_female_.enc_id
=* pe.enc_id AND pe_proctological_.enc_id =* pe.enc_id
AND pe.enc_id = '8E487A58-E53A-42B3-8D0E-07AA1BE2E5E5'
Can conditional tests be placed in the WHERE clause of a stored procedure?
If so, an example please! Thank you very much.
Hi, I just wanted to ask if this statement is right:
strSQL="SELECT * FROM Bidder WHERE 'BIDDER_ID=" & strBidderID & "' and 'BIDDER_ACCOUNT_ACTIVATED=yes' AND 'BIDDER_STATUS=UNBLOCKED';"
Can we give AND a number of times in a WHERE CLAUSE?
Hi everyone,
I have yet another question:
I have this cases table that looks like:
serial qty
53565 1
53566 2
53567 3
I am trying to select the rows where the sum of their quantity(qty) + 1 = 4.
This is the syntax I am trying to use (which does not return any rows)
select serial
from cases
group by serial
having ((sum(qty) + 1) = 4)
Desired results:
serial
53565
53566
I'm probably doing something real stupid up there...so any I'd appreciate any help :)
I just learn how to create a trigger. I had question: what is the different of For, after, instead of clause when we create a trigger? Why we need these? When to use each of these. Thanks in advance.
View 1 Replies View Relatedhi guys help please..I have a stored procedure below that basically retrieve data from tables and under my WHERE clause I want to execute conditions depending on the value of "@FilterBy" variable. If @FilterBy is equal to "Pending" then execute a conditions under "IF @FilterBy = 'Pending'" and if it equals to 'Delivered' then execute conditions under IF @FilterBy = 'Delivered'. But unfortunately I can't figure out how to do that my stored procedure below just wont work becuase it has an error "Incorrect syntax near the keyword 'IF'"...Any help guys on how to solve this problem? Thanks in advance!
USE [CFREEDB]
GO
/****** Object: StoredProcedure [dbo].[usp_DELIVERY_GET] Script Date: 09/01/2007 12:03:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[usp_DELIVERY_GET]
@FilterBy varchar(20),
@CustomerID int,
@FromDate datetime,
@ToDate datetime
AS
BEGIN
SELECT DISTINCT Delivery.CustomerID, Customer.Customer_LastName, Customer.Customer_MiddleName, Customer.Customer_FirstName,
Customer.Customer_Company, Customer.Customer_Address, Customer.Customer_ContactNo, Customer.Customer_Discount, Customer_Balance
FROM CFREE_Delivery Delivery
INNER JOIN CFREE_Customer Customer
ON Delivery.CustomerID = Customer.CustomerID
WHERE
IF @FilterBy = 'Pending'
BEGIN
Delivery.IsDeleted <> 1 AND
Delivery.IsDelivered IS NULL AND
Delivery.IsRemitted IS NULL AND
Delivery_Date BETWEEN @FromDate AND @ToDate
END
IF @FilterBy = 'Delivered'
BEGIN
Delivery.IsDeleted <> 1 AND
Delivery.IsDelivered IS NOT NULL AND
Delivery.IsRemitted IS NOT NULL AND
Delivery_Date BETWEEN @FromDate AND @ToDate
END
ORDER BY Customer.Customer_LastName, Customer.Customer_FirstName, Customer.Customer_MiddleName
END