Howdy,
I have a SQL server in a completely different forrest than the
workstation I am running query analyzer on. However in query analyzer
when I choose windows authentication I cannot manually specify
"domainusername" as I could when mapping a file share across domains
or forests. Is there any way around this without resorting to using SQL
Server authentication?
Thanks
I had a few packages created with Windows Authentication which now needs to be migrated to run with SQL Server Authentication. I tried changing it in the connection managers but the packages failed to validate at the SCD transformations.For a few packages I had Configuration files for these packages where i tried to do it but it dint run giving the following Error Message:
[Connection manager "Target"] Error: An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user <<with my network id>>.".
[Execute SQL Task] Error: Failed to acquire connection "Target". Connection may not be configured correctly or you may not have the right permissions on this connection.
Target was the name of my connection.
When creating connections for source and destination in a package what is the recommended approach, window authenticatation or sql? I will be deploying to filesystem, what would be best.
this is my first ssis package, so pardon my ignorance.
many thanks.
kushpaw
OK
We have always used sql servwer login to the servers for all our applications for out intranet apps
And we use windows auth to do development
So when we do that we logon to wuindows, and then just connect, with no password required
But how does an application "logon" to connect to a database
Is it just in the connection string just like sql server auth
or is it different?
Hi All,I have a SQL Server 7 installation running on a windows 2000 server.SQL Server switches from mixed mode authentication to Windows Only onreboot. Has anyone else experienced this? Any help would be greatlyappreciated.Service Pack Reports:Microsoft SQL Server 7.00 - 7.00.1077 (Intel X86) Sep 6 200215:10:15 Copyright (c) 1988-2002 Microsoft Corporation StandardEdition on Windows NT 5.0 (Build 2195: Service Pack 3)I only see two strange entries in the log:2004-05-01 00:38:09.55 spid37 Using 'xpsqlbot.dll' version'1998.11.13' to execute extended stored procedure 'xp_qv'.2004-05-01 00:38:01.71 spid1 Failed to obtainTransactionDispenserInterface: Result Code = 0x8004d01bI don't believe that either of these are related to the configurationoption for Windows Only, though.
View 2 Replies View RelatedHi,
I cannot log in to SQL Server 2005 Dev Edition in my local machine using Windows Authentication. The server returned "Login failed..." when connecting with SQL Server Management Studio.
I have not change anything since installation of this server.
This problem happens in RTM and SP1 versions, both running on Windows Vista RTM.
Anyone having this kind of problem too? Any solution? I'm guessing it's Vista-related.
Is there any way to provide 'Windows' credentials to connect the Management Studio to a remote SQL 2000 DB when I am not logged on as that user (on the dev machine where I am running Mgmt Studio)?
I do of course have local machine admin rights via an AD domain account added to the machine administrators on the remote SQL box itself.
Hi,
We are having problems in our project. We have ETL packages we call from our web app that we want to run and the user is the logged in one in the web.
We use Windows Authentication in our web app and we used the CreateProcessAsUser to impersonate the user. <identity impersonate="true"/> is also in our web.config.
We were able to call the dtexec successfully (with the user for the process as the logged in the web -- thus impersonation was successful.)
But, a problem arises when we use Windows Authentication for the connection of the ETL to the db (SQL Server). When we run the ETL on our local machine using dtexec/dtexecui, it works fine.
But when we ran it in our server, it fails. According to the event logs, it can't connect to the db server even though impersonation is successful.
Btw, the client, web server, db server are three different machines.
Any help is appreciated. Thanks!
Hi Guys,
I have an Intranet web application and I have to use windows authentication. They are 4 main users group to access the application, each with different set of permission on my store procedures.
I have created a windows group for each of those group in my windows environemnt. My DB Connection String in web.config is set to Integrated Windows Authentication ( Integrated Security=SSPI)
I have done all configuration based on this article: http://msdn2.microsoft.com/en-us/library/ms998292.aspx
I have 4 different database Roles in my database and 4 different database users. I also add NT AUTHORITYNETWORK SERVICE as a member of each of those database Roles.
Now I get connected, fine and set permission on the database roles.
1 thing I want to know, How Can I get the Windows Group name in the database, which has the same name as my SQL Login and Database Roles or User
I tried all SUSER_SNAME() and ... they all return NT AUTHORITYNETWORK SERVICE
I want to get AppPowerUser Role or windows group name. I think I should be able to because I am using windows authentication.
Any help is appreciated.
Mehdi
Hi-I have a program that I am developing on a laptop, then deploying it on a server.I have the prgram running passing a username and PW in the connection object, but like the idea of using windows authentication MUCH better.I just joined the domain, so I am domain/me for example.If I log into the server, and look at securities, logins and added domain/me to the logins.I then try and set up a sql connection via both visual studio, and sql server magt studio, and get the dreaded "Cannot generate SSPI context" error. Anyone else have this problem? SHOULD V.S. be using domain/me to connect? TIA dan
View 6 Replies View RelatedIs it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View RelatedI am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq
View 4 Replies View RelatedHi there
Running query analyzer against two different server.
the first only need 1-2 secs to return the query result,
the other return 7-8 secs for the query result.
plz advice what could cause this slow performance?
thx
Is Query Analyzer being droped in MS-SQL 2005? I'm using Microsoft SQL
Server Managemant Studio and I couldn't find the Store Procedure node
and Query Analyzer anymore. Help is appreciated.
Say you have a state column with the name of a state in it. And you need to add a branchId to the table. I know I should not have it in there, and the application should use proper lookup tables, but that's not the case.
Can SQL Server query analyzer loop through and update the branchid field based on a lookup in a lookup table?
How would that be done?
Hi All,
I think I post this in a wrong section but I cant find forum for sql server and i just have a quick question
basically, I installed sql server 2005 and I need to debug a store procedure.1. Does query analyzer come with sql server 2005?2. If not how can I debug store procedure in sql server 2005?Thanks in advance
Does anyone know if there is a limitation in Query Analyzer in terms of the number of characters in a query that it will parse?
I am having a problem with some large queries, and I am not sure if it is Query Analyzer, or the SQL Server query parsing engine that is causing the problem.
The query just involves a simple SELECT statement, albeit for a large number of columns.
Hi,
I'm using SQL Server 7.0. I connect to one database in Query Analyzer and I can use the "Perform Index Analysis" option under the "Query" menu option. when I connect to one of our other databases, the "Perform Index Analysis" option under the "Query" menu option is disabled (greyed out). Does anyone know what the problem could be and how might I be able to enable this option.
Thanks in advance,
Darrin
Hello
In query Analyzer of SQL2000 when i select
2 Select Queries and Run it shows in same Window as 2 Grids
I have seen people using seperate grid option to view each query results in a Tab query results Pane in MSSQL 7.
Eg Select * from table1 (in one grid)
select * from table2 (in another grid)
like a TAB so that i can move from one tab to another.
Is it possible to do that in query Analyzer?
Regards
I would like to use the Query Analyzer to create a script that will prompt the user(dialog box) for a response in SQL Server 7.0. I found a post someone mentioned DBMS can return messages and using Query Analyzer.
Thanks for your help in advance.
I'm trying to do a couple of things with some different tables.
With the first table, I have first name and last name in two separate columns.
I'm trying to create a new ID column that would do the following.
Take the first 3 letters of the last name (and remove any non characters such as ',&) and the first 3 letters of the first name, and then combine them.
I know how to use substring to take the first three, and I know how to combine them, but I'm having problems removing the non alpha characters.
For example, if the columns looked as follows:
First Last
John O'Connor
I'd want the result to look like OCOJOH, however, I'm getting O'CJOH.
The second issue is how would I do something similar if the First and Last Name were in the same column and string.
For example, if the column looks as follows:
Name
John O'Connor Publishing
I'd like to pull the first 3 from the first string before the space and then the next 3 so it would be as follows:
JOHOCO
Finally, I want to compare these new IDs, and add numbers to them.
So if I had the following
First Last
John O'Connor
Johnny O'Connell
The first would be OCOJOH01
The second would be OCOJOH02
If there are not any duplicates with the new ID, I'd like to call it OCOJOH01 and then move on.
Any help/ideas would be greatly appreciated.
Thanks
Hi;
I would like to change the format of dates that is in colum using query analyzer. The name of the colum is StartD and this how they look: 3292006 I would like to insert the / / . Can someone show me how to accomplish it.
Thank you
I have a database with couple of store procedure and views.
Is there any way that i can find out all sp or views which contains word like *svc*. I am talking about the containt of the sp and views not name.
We are replacing one module so i have to change the all sp and views which use table or view start with svc.
Need help.
Thanks
in the market place that will run a query on multiple DBs acrossmultiple servers? Without having to manually connect to each server?If so, can anyone provide a link for it.Thanks
View 3 Replies View RelatedI am new to SQL and need help running a performance check on our companies dtabase. I use SQL Enterprise Manager 2000. Could someone please help me accomplish this?
Thanks,
Carl
hi everybody!
this is my first post, so I'd like to say hallo to everyone!
I "work" on SQL Server 2000, and I would like to ask you a question.
Is it correct that i cannot set a database user as database owner (using command sp_changedbowner 'user_name')?
QA returns this error message:
"Server: Msg 15110, Level 16, State 1, Procedure sp_changedbowner, Line 46
The proposed new database owner is already a user in the database."
so I have to use sp_revokedbaccess and then I can change the db owner.
why can't a db user be the db owner?
thanks for the answers!!
Hi,
Was wondering if anyone can tell me how to get the Query Analyzer Tool installed to WM6 Professional Emulator inside of VS05?
Thanks,
John.
Hello,
how is the query analyzer opening a database??? Does someone knows the command it uses to open the connection ??
I ask this because i have corrupted datafiles stored on a flash card which i can not open with connection.open but the analyzer opens them normally. After that i can open the datafiles using normal code
Does it use any special params?? I get the corrupted files on power down and after that i can not open them from my application. I can only do this after i open them once with the query analyzer
The database is about 20 MB stored on a flash card
Thanks in advance
Say I have this query in my stored procedure. The problem I am facing is @OrgUID contains no value, so I put these 2 lines to debug. Am I using the right way to debug? I couldn't see the value of @OrgUID using this way. OrgUID is the PK in Organization. INSERT INTO Organization (OrgName) VALUES (@DealerName)SELECT @OrgUID = @@IDENTITYprint @OrgUIDreturn
View 4 Replies View Related