Using Reporting Services To Compare Two Datasets
Feb 15, 2007
Hi,
I need to compare two datasets on the same server and then display if there is a difference in some fields for the two datasets.How can I do that? Is there an example somewhere that I can use ?
View 2 Replies
ADVERTISEMENT
Nov 20, 2007
Hello All
Here is my scenario
1. I have to use a ODBC driver which does not support sub query. So I am forced to use two datasets and link them together.
2. I cannot use Sub-Report because the sum from dataset 2 will be used in calculation in Dataset1
3. Also SubReport cannot interact with Main report
4. We Re-created the report in Crystal XI and we can have two datasets, link them and Subreport value can be accessed in Main report
5. We tested Custom method to get this value for every record in Dataset 1 and it is taking too much time.
6. I could not beleive we cannot link two datasets in RS 2005. I like to use RS 2005 but this limitation is forcing us to use Crystal
6. Before we make a decision I thought to post my question here. Is there anyway to link two datasets?
All your help will be greatly appreciated.
View 2 Replies
View Related
Oct 28, 2015
I have one tablix and this tablix has 2 parts(chart and table with numbers). Table with numbers uses Dataset1 and for chart I created another, 2nd dataset. How to get information from second dataset?
View 4 Replies
View Related
May 8, 2007
I am using SQL Reporting Services 2000.
Is there some way I can connect two datasets? Main issue is that I have to connect two tables from different databases and then display them in a report. Since these tables reside in different databases therefore I have one dataset for each table. While displaying the report I need to join both these datasets and display a report with data from both the tables.
View 1 Replies
View Related
Aug 5, 2015
Struggling to come up with an overall sum for each individual user when using the below code
SELECT
Practice.ibvStaffCategorisation.StaffId
,Practice.ibvStaffTotalsCL2Y.Period
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
[Code] ....
As I am using union all it shows two values for each user, the problem is I am getting the data via lookup like below
=Lookup(Fields!StaffId.Value, Fields!StaffId.Value, Fields!Sum_ChargeableAmount.Value, "ABSTimeRollingY")
I don't think I can use a Sum within a lookup so at the moment it is only bringing through the first value for each user but I would like it to bring through both.
Is there a way to do this within the dataset or via the query in the table?
View 2 Replies
View Related
Mar 5, 2008
Hi,
I would like to build an SSRS report from two different cubes (SSAS 2005). These cubes are contained in two different SSAS databases.
To do this, i created a dataset for each cube throught MDX expressions.
These datasets use common parameters defined in my report.
Thus, i try to integrate in my report chart datas from the two datasets, but my chart only target one dataset.
Is it possible to create a kind of dataset view to join my two datasets ?
Or is it possible to join the cubes from two different SSAS databases in an MDX expression to put all my datas in a single dataset ?
thx for your help.
Zohir
View 3 Replies
View Related
Aug 26, 2015
I have to create tablix report using data from 2 datasets. The data source for one of the dataset, DataSet1 is Microsoft SQL Server and the data source for the other dataset, DataSet2 is Excel.
I have to pic 3 columns from DataSet1 and one column from DataSet2.
I tried using a lookup function Expression:
=Lookup(Fields!ProgrammerName.Value,Fields!ProgrammerName.Value,Fields!Skill.Value, "DataSet2")
The above expression is throwing #Error on that column in the output.what should I do?
View 5 Replies
View Related
May 22, 2015
I am not sure if this is possible or not, we have two datasets and each one has an additional calculated field which breaks the value JobBilledExVAT into three years.
So it reports for example how much we billed in May 2015, 2014 and 2013.
I have got the table to display this when reporting on one dataset by grouping by year
The datasets both look similar to this
SELECT
Practice.ibvSalesByJob.JobBilledExVAT
,Practice.ibvSalesByJob.[Year]
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ...
The calculated field is
=Switch(Fields!Year.Value = Parameters!Year.Value ,"15", Fields!Year.Value = Parameters!Pre1Year.Value ,"14", Fields!Year.Value = Parameters!Pre2Year.Value ,"13")
The field I am looking to add together is below
=Sum(Fields!JobBilledExVAT.Value)
If I do the below on the dataset associated with the matrix it displays the sum for each year correctly, I would however like to add the Sum(Fields!JobBilledExVAT.Value) from a different dataset (ABS1M) for the relevant year.
I tried this
=Sum(Fields!JobBilledExVAT.Value) + Sum(Fields!JobBilledExVAT.Value, "ABS1M")
However this adds 2015, 14 and 13 from ABS1M and doesn't add them individually if that makes sense? With the calculated field it only shows Year under the main dataset heading not 15, 14 and 13 separately.
I was think of using LOOKUP however I don't know how this would work as 15, 14 and 13 are not displayed under the dataset.
View 5 Replies
View Related
Apr 29, 2015
In ssrs, I want to create an expression for the row visibility. But, the expression will contain 2 conditions from different 2 datasets (DealStarts & RowofTrendingVisibility). I have applied a solution from online, but got an error message is
"The Visibility.Hidden expression for the tablix ‘Tablix9’ contains an error: [BC30451] Name 'launchdate' is not declared. "
I think that there is a minor issue in my syntax.
=iif ((Last(MonthName("DealStarts"))=monthname(month(today())) or launchdate ("RowofTrendingVisibility")<Parameters!StartDate.Value),true, false)
View 3 Replies
View Related
Jun 23, 2015
I have table which has 5 columns(col1,col2,col3,col4,col5) very simple and some data .
I would like to create a tabular report datasets on the report like shown below with grouping on col1
like
col1 some static text and dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
col1 some static & dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
Note I need to keep all the tables on the same page and when exported in excel they should come on same page sheet.
View 2 Replies
View Related
Jun 17, 2015
I want to use multiple datasets in a table and wants to do the full outer join on the two datasets in the same table. For example, my two datasets are:
I want to display a ssrs table like:
Both the datasets are coming from different sources. So I cannot integrate them at sql query level.
View 4 Replies
View Related
Jun 4, 2015
I am trying to use one dataset rather than two and was hoping to then filter the data via a table or matrix.
This is my dataset
SELECT
Practice.ibvStaffCategorisation.StaffId
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableAmount) AS Sum_ChargeableAmount
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableAmount) AS Sum_NonChargeableAmount
,Practice.ibvStaffTotalsCL2Y.Period
[code]....
I would like to display two rows of data for each StaffId one representing the current period and the other all periods to date so the table would look something like below.
StaffId | Non Chargeable Time | Chargeable Time
CJJ | 0:20 | 4:20
| 4:50 | 19:20
JN | 0:05 | 5:30
| 1:30 | 25:30
The above shows two separate StaffId figures the first line for each shows non chargeable and chargeable for the current period and the second line a total of all periods in that year.
I have managed to get the first row to display only figures from the current period by using a filter however it also applies the same filter to the second row in the group. I have also tried to group the rows but am drawing a blank.
View 6 Replies
View Related
Jun 21, 2015
I have two different dataset in one Report, Each Dataset result is binded to a different Table component.
When I export as Excel ,I am getting all this in One Excel sheet.
I need this in separate excel, as dataset1 in excel1 and dataset2 in excel2.
View 3 Replies
View Related
Sep 27, 2015
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA
fields:
ID
Name
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
View 3 Replies
View Related
Jun 11, 2010
I have two charts which are based on their own separate datasets. One chart shows data aggregated by MONTH, the other chart shows data aggregated by WEEK. I have put both of these charts inside a rectangle and set their visibility based on whether or not there is data returned by their respective datasets. This part is working just fine.
However, I have added a tablix to the report, deleted all columns and rows leaving only one remaining row/column so it looks like a textbox. This tablix is sitting on top of the two charts. The problem i'm having is that when both charts return no data and they do not show up in the report, the tablix still remains visible. I need to set the visibility but based on a condition between the two different datasets behind each chart.
Here's what I need: If ONE of the charts returns data, then I need the tablix to be visible. If neither chart returns data, then I need the tablix to be invisible. I'm trying to write an IIF statement comparing the two datasets but I get inscope errors. Isn't it possible to compare values which are contained in two separate datasets in SSRS?
Seems like something like the following logic should work:
IIF(CountRows("Monthly_DataSet") > 0 OR CountRows("Weekly_DataSet") > 0 , FALSE, TRUE)
Obviously the above expression will return syntax errors, but you'll get the point as to how i'm thinking. How can I set the visibility of the tablix based on these two charts?
View 4 Replies
View Related
Mar 27, 2012
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
....
Table 3:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1:
Detail rows for Group Param Value 1...
Table 2:
Detail rows for Group Param Value 1...
Table 3:
Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
View 5 Replies
View Related
May 18, 2015
I need to fill the cell background color in the Matrix Table SSRS report based on below requirement -
When
For A resource 'Capacity' equals to 'WorkExcludingCapacityAndAvailbility' and Project Status equals to OPEN then GREEN
When
For A resource 'Capacity' equals to 'WorkExcludingCapacityAndAvailbility' and Project Status equals to PENDING then RED
Here is the below mock-up data -
Looking for solution based on above mockup data how I can compare different rows value by resource considering Project Status Column value in Matrix Table report to set the background color.
View 3 Replies
View Related
Jan 9, 2007
Hello,
How can I solve this problem.
For example, I have two databases. db1 and db2.
I want to compare two float fields from tables from db1 and db2 and the present the difference between these fields in a column in reporting services.
ex. loop1
value from db1.table_db1
4
value from db2.table_db2
6
diff
2
ex. loop2
value from db1.table_db1
2
value from db2.table_db2
2
diff
0
..continues...
Should I create 2 datasets and 2 datasources? Must I write custom code for this?
Regards
View 2 Replies
View Related
Jan 18, 2012
What I want to do is have a matrix that looks something like this
Jan Feb March
Person A 1 ↑ 2 ↑ 3 ↑
Person B 2 ↑ 2 ↔ 2 ↔
Person C 3 ↑ 2 ↓ 1 ↓
So basically it checks the previous months value and uses that to determine which indicator to use ?
View 15 Replies
View Related
Jun 15, 2015
Here's what I need to do..
1. I have a dataset with userID's
2. I want to only show the records where a userID is a member of a specific AD group,
I'm not allowed to use a linked server. I was able to make a datasource in SSDT that connects to AD, but I don't know where to begin with the dataset expression in the SSRS report.
View 7 Replies
View Related
Jul 7, 2015
I'm trying to change the background color in a field based on its number value being greater than another number value in an adjacent field. The issue I am having is the format, it's like a software version string or IP address (in this case, it is A/V Signature Versions) where the length of the numbers between the decimal places can be different, and that seems to throw off the comparison.
For example (these are actual values I am comparing);
1.201.1054.0 should evaluate as greater than 1.201.2.0 but when compared, evaluates as FALSE.
View 2 Replies
View Related
Mar 22, 2008
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
View 1 Replies
View Related
Feb 22, 2008
Hi,
I'm using SQL 2008 Februar CTP and trying to use SSIS for Data Source as described in http://msdn2.microsoft.com/en-us/library/ms159215(SQL.100).aspx.
I've created SSIS package and preformed steps described in http://msdn2.microsoft.com/en-us/library/ms345250(SQL.100).aspx (after fixing version to 10.0.0.0).
Now I got next error when trying to add SSIS DataSource (in Report Designer - Visual Studio):
Error messageThe data extension SSIS could not be loaded.
Please help.
Matej
View 3 Replies
View Related
Dec 6, 2006
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
View 1 Replies
View Related
Jul 27, 2015
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
View 7 Replies
View Related
Apr 30, 2015
I was wondering if there's a way to compare 1 table with other (in other DB), I mean:
Table1 DB1
ID
NAME
DESCRIPTION
Table1 DB2
ID
NAME
DESCRIPTION
ADDRESS.
And when the query(or other case) gets that the table 1 doesn't contain ADDRESS, alter the table and add this field that is missing.
View 4 Replies
View Related
Apr 21, 2015
My Requirement IS : 1<sup>st</sup>run: if the record does not exist in the table insert the record (file_name, last_modified_file_date) and create a copy in the archive folder with file_name_currentdate.csv
Daily run: retrieve the last_modified_file_date from the input file and check if the retrieved date is greater than the last_modified_file_date in the table:
If true: create a copy of the input file in the archive folder and update the last_modified_file_date in the table with the retrieved date
If false don’t do nothing because the file has been archived in one of the previous runs.I have already retrieving the modified date and File Nae iserting into Filename Table: (That table has 2 columns which are FileName and FileDate) so In script task everytime the variable getting Modified date(retrieve the last_modified_file_date from the input file). How I can Compre the existing table record and variable. I have already imported the all Filenames and Modified into table like below.
View 3 Replies
View Related
Oct 31, 2015
If we want to compare datetime vs a specific time what should we do?
i.e. startdatetime specific time
2015-10-12 00:03:19:020 16:23:00
I want to compare just time in startdatetime coloum vs a specific time i.e. 16:23 .
I convert startdatetime to (DT_DBTIME) after that i want to calculate just time difference. how can i do it?
i.e i want to calculate this two (DT_DBTIME) columns without any date ==> (16:23:00)-(00:03:19)
View 6 Replies
View Related
Aug 12, 2015
I'm encountering a very peculiar situation when I'm trying to compare source and target data using conditional split. Following is the Data Flow and how I'm trying to achieve this.
Source Data : Col_A (PK) Col_2
1 100
8 500
Target Data : Col_A (PK) Col_2
1 100
3 700
8 500
Look-up Target on Col_A to check for existing records. Now we have four columns in Look-up match output: Col_A, Col_B, Lkp_Col_A (Target Col), Lkp_Col_B (Target Col).
Conditional Split: Compare Col_B with Lkp_Col_B
Update target if there is any change in the existing value of Col_B.When I'm running the package for every record in source, the conditional split fails and even when there is no change in Col_B, some of the records (Not all and quite randomly) get updated with the same value. If I run the package for few records, it works absolutely fine.
View 8 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Sep 11, 2015
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
View 4 Replies
View Related
May 14, 2008
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
View 4 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies
View Related