Hi,
This might seems a little 'out there', but has anyone tried doing ETL from an Oracle 10g ODS into an Oracle 10g DW, and from there into SSAS2005 cubes?
Any caveats houghtscomments on doing this?
Thanks,
JGP
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
Hi!
I'm loading from Oracle using the OraOLEDB.Oracle.1 provider since I need unicode support and I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at myTask [DTS.Pipeline]: The "output column "myColumn" (9134)" has a precision that is not valid. The precision must be between 1 and 38.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204018 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
For most of my queries to Oracle I can cast the columns to get rid of the error (CAST x AS DECIMAL(10) etc), but this does not work for:
1) Union
I have a select like "SELECT NVL(myColumn, 0) .... FROM myTable UNION SELECT 0 AS myColumn, .... FROM DUAL"
Even if I cast the columns in both selects (SELECT CAST(NVL(myColumn, 0) AS DECIMAL(10, 0) .... UNION SELECT CAST(0 AS DECIMAL(10, 0)) AS myColumn, .... FROM DUAL) I still get the error above.
2) SQL command from variable
The select basically looks like this:
"SELECT Column1, Column2, ... FROM myTable WHERE Updated BETWEEN User::LastLoad AND User::CurrentLoad"
Again, even if I cast all columns (like in the union), I still get the same error.
Any help would be greatly appreciated. Thanks!
Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?
I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.
we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.
what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
Hi Everyone,
I've been searching for a solution for this for a week-ish, so I thought I would post my quesiton directly. Here is my scenario..
Source: MS SQL Server
Destination: Oracle 10g
The destination table has a partition set on a column called "DATE_HIGH". How do I populate this date high column in my package? Currently I just have a source object, and a destination object, but I'm unclear how to populate this field in the destination. I've read one blog that states "use OLE DB Command" - but that isn't enough information for me to implement - Can someone be more specific in these steps? Here is an example of what my newb-ness needs to understand
OLE DB Source (Select * from Table) ---> OLE DB Command (What query goes here?) --> OLE DB Destination.
Second part of my question: There is a second column called "ROW_NUM" and there is an Oracle Sequence provided to me... What objects do I need (Source, Destination, OLE DB Command etc...) and how do I call this sequence to populate on the fly as I'm loading data from my source?
If these are simple questions - my appologies, I am new to the product.
Best Regards,
Steve Collins
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
Hi--
I am running SQL Server 2005 on Win2k3:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
This is how I set up my Linked server:
Provider: "Oracle Provider for OLE DB"
Product Name: SomeServer
Data Source: SomeServer
Provider String: "Provider=OraOLEDB.Oracle;Data Source=SomeServer;User Id=MyLogin;Password=MyPassword"
The query I run is:
Select * from [Someserver].[schema or database]..[tbl_name]
Any help??? What am i missing?
Oracle and MS drivers do not support parameterized queries, so update table set column=? where primarykey=? does not work for Oracle.
Anyone knows how to update an Oracle table through SSIS?
Thanks!
Wenbiao
need a clue about how to migrate the data from an Oracle applications 11.03 and underlying Oracle 8.05 database to navision 4.0 running sql server 2000
tia
My application which ran perfectly well yesterday suddenly stopped working in this morning with following error message. I didn't change anything, at least I believe. Interesting thing is that I don't use any Oracle connection but connects to MS SQL Server 2005 Express version locally. Error messages are different according to the connection string though I don't think it makes difference:
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;SSPI=true" />ErrorMessage from VS2008 ="Unable to get records. Object reference not set to an instance of an object."
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;User Id=handtool_DB;Password=mypassword" />ErrorMessage from VS2008 = "Unable to get records. Unable to connect to database. ORA-12154: TNS:could not resolve the connect identifier specified." By the way, the application was generated from IronSpeed 5.1 Enterprise. My development environment is : VS2008, SQL2005 EXPRESS, Windows XP SP2, ASP.NET 2.0
We have actually an Oracle server in the network though. My gut feeling is that something might have changed in my network server during the night but how come it can possibly affect my application running on my local PC. I checked the connection of local SQL Express Server from SQL Server Management Studio and it connected well with UserID=handtoo_DB and showed all tables and stored procedures required for the application. So there is no problem in SQL Server database side.
I would welcome and appreciate any input.
fudata
New to SSAS so, have some not so intelligent ???
We have created Dimensional Model within SQL 2005 and created SSIS packages to load. We have Pk's on Dimensions and FK's on one Fact table. We are thinking about adding clustered index to Fact that consists of the FK's and order by the Hierarchy within the Fact by Dimension. IS THIS A GOOD IDEA IF WE DRILL DOWN AND DRILL THROUGH = QUESTION #1
We build a CUBE from the dimenionsal model and we do not know how to build indexes on the cube. SO DOES SSAS AUTOMATICALLY BUILD INDEXES IT THINKS IT NEEDS ON THE CUBE AND DO YOU KNOW WHAT THEY ARE?? ALSO IF WE HAVE INDEXES ON DIMENSIONAL MODEL DO THOSE GET USED BY SSAS CUBE THAT WE CREATED WITH AUTO BUILD??? = QUESTION #2..
THank you
Hi All,
We have 64 bit win 2003 & sql2005 EE sp2.. I managed how to trick VS2005 with Oracle connections and have converted a lot of packages already from sql 2000 to sql 2005(using Oracle connetions as well),
now I stack with one oracle connection manager...
So just to clarify, we have SSIS on same SQL server installed, as well have this one Oracle server set as linked server(using Oracle client isntalled), I'm working with BIDS on this server as well..So,
when I created connection manager and test connection - it succeeded.. Now after creating rest in ssis and trying to debug.. I'm getting :
[Connection manager "PRD02.genericuser"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-12154: TNS:could not resolve the connect identifier specified".
What could be a reason of this error, if test connection is working fine, as well preview of data....???
Just in case I tried to create connection manager by using Oracle provider for OLE DB as well as Microsoft OLE DB Provider for Oracle..same things, connection is tested fine in both cases, preview is Okay, when start to debugging - problems...
Dose any one have a simple workaround to implement a connection fromSQL 2005 SSIS 64 bit to Oracle 10 G
View 3 Replies View RelatedHi,
I am new to using SSIS (after using DTS on SQL Server 2000 for many years).
I am trying for the first time to connect to an Oracle 9.2 database and export data from it into SQL Server 2005.
I used the Microsoft OLE DB Oracle Provider to connect to the Oracle instance. The test connection works fine, but when I try and preview a table or copy data from Oracle I get the error....
The component reported the following errors
Cannot retrieve column code page
Has anyone got any ideas how I fix this?
Many thanks
Pete
I have tried everything I can find online to resolve an ongoing issue with a SSIS package that pulls data from Oracle. I have other servers that can function just fine connecting to the same Oracle database. I have the 10g x64 client installed and I can TNSPing the database from the command prompt. I get varying errors depending on what I am doing. If I execute the package stored in SSIS MSDB from SSMS on my computer, it runs just fine. If I run it from the server I get:
Info: 2008-02-26 23:02:42.59
Code: 0x4004300A
Source: Data Flow Task RT_ADDRESS DTS.Pipeline
Description: Validation phase is beginning.
End Info
Progress: 2008-02-26 23:02:42.59
Source: Data Flow Task RT_ADDRESS
Validating: 0% complete
End Progress
Error: 2008-02-26 23:02:42.65
Code: 0xC0202009
Source: ROCKDBA DATA UPDATE (NEW) Connection manager "Rock"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H
result: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-26 23:02:42.67
Code: 0xC020801C
Source: Data Flow Task RT_ADDRESS OLE DB Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAG
ER. The AcquireConnection method call to the connection manager "Rock" failed w
ith error code 0xC0202009. There may be error messages posted before this with
more information on why the AcquireConnection method call failed.
End Error
Error: 2008-02-26 23:02:42.67
Code: 0xC0047017
Source: Data Flow Task RT_ADDRESS DTS.Pipeline
Description: component "OLE DB Source" (1) failed validation and returned err
or code 0xC020801C.
End Error
Progress: 2008-02-26 23:02:42.67
Source: Data Flow Task RT_ADDRESS
Validating: 50% complete
End Progress
Error: 2008-02-26 23:02:42.68
Code: 0xC004700C
Source: Data Flow Task RT_ADDRESS DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2008-02-26 23:02:42.68
Code: 0xC0024107
Source: Data Flow Task RT_ADDRESS
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 11:02:35 PM
Finished: 11:02:42 PM
Elapsed: 7.156 seconds
I tried uninstalling and reinstalling Oracle on this server. I tried the 32bit Oracle Client as well as the 64bit client. I rebuilt the package to use Data Flow Tasks from scratch, and I have the same issues. If I try and build the package on the server itself in BIDS, I get TNS errors in BIDS trying to create connection managers. I am missing something, but I have no idea what it is. If I try and use a DataReader Source, I get:
System.InvalidOperationException: Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed. ---> System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at System.Data.Common.UnsafeNativeMethods.OCILobCopy2(IntPtr svchp, IntPtr errhp, IntPtr dst_locp, IntPtr src_locp, UInt64 amount, UInt64 dst_offset, UInt64 src_offset)
at System.Data.OracleClient.OCI.DetermineClientVersion()
--- End of inner exception stack trace ---
at System.Data.OracleClient.OCI.DetermineClientVersion()
at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction(String userName, String password, String serverName, Boolean integratedSecurity, Boolean unicode, Boolean omitOracleConnectionName)
at System.Data.OracleClient.OracleInternalConnection..ctor(OracleConnectionString connectionOptions)
at System.Data.OracleClient.OracleConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OracleClient.OracleConnection.Open()
at STPSendMailData.BaseData.SetConnectionAndTransaction()
It just doesn't add up. I get this exception with the 64 bit client installed. Anyone with ideas, I am getting near to the point of migrating backwards to 32 bit SQL on this server to be rid of this problem.
Hi Gurus,
I am trying to build a Data Warehouse using SSIS in SQL Server 2005. My source data is in Oracle RDB. Now when I am trying to connect to oracle RDB using the OLE DB Source component, I am getting the following error.
Test connection failed because of an error in initializing provider. Oracle client and networking componenets were not found. These components are supplied by Oracle Corporation and part of the Oracle Version 7.3.3 or late client software installtion.
Provider is unable to funtion until these components are installed.
I did install the Oracle RDB client software .Apparently it looks like Microsoft OLE DB for Oracle supports Oracle 7.3.3 and above. At the same time I tried to use ODBC for Oracle RDB driver from ODBC data sources. But the OLE DB Source Component in SSIS can't recognize ODBC. So now I am stuck on how to load the data from Oracle RDB to SQL Server 2005 staging area.
Any thoughts on this would be really appreciated. Ideally we are looking to port the data directly from Oracle RDB to SQL Server without any intermediate flat files (flat files etc)
Thanks,
SK
Hi All,
We are considering loading oracle datawarehouse using SSIS as ETL. I would like to know the experiences of the team in doing the same. Please share your experiences on this.
Thanks,
S Suresh
Can anybody point me how to connect to an Oracle DB using SSIS? I use the ole DB Connection Manager and pick the Microsoft OLE DB Provider for Oracle but it doesn't seem to work. Any suggestions are greatly apprecaited.
Thanks.
Sam.
Hi Everyone
Please pardon my inexperience, I am new to SSIS. I am having some difficulty with using Oracle
procedures in SSIS. I have installed and configured the Oracle Client Software for 10g. I have managed to
create a connection to the Oracle database that I will be using. I am currently using the Oracle Provider For
OLE DB. I want to add an OLE DB Source component to the Data Flow which I then want to configure to
use an Oracle procedure to bring back the data that I need.
When I want to execute the Oracle Proc in the same way that I would normally execute a SQL Proc it returns
an error saying:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Source [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4A.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E4A Description: "Command was not prepared.".
Error at Data Flow Task [OLE DB Source [1]]: Unable to retrieve column information from the data source. Make sure your target table in the database is available.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020204A (Microsoft.SqlServer.DTSPipelineWrap)
I have tried using a ADO.NET connection and then using a Data Reader Source component but I get an
error with my SQL Statement saying "Invalid SQL Command"
Could anyone please provide me with some information on what I am doing wrong? Or possibly point me to
information that will help me? I have been searching the net non-stop without success.
Hi ,
1.Dynamic Sql
----------------
My source table is Oracle .we want to have dynamic query the following steps we have done.
a.Created a new variable called StrSQL & ProductID variable contains values for where clause.
b.Set EvaluateAsExpression=TRUE
c.Set Expression=""select * from prod where product_id = " + @[ProductID]
d.OLE DB Source component, opening up the editor
e.Set Data Access Mode="SQL Command from variable"
f.Set VariableName = "StrSQL"
But i am getting the following error
Error at DataFlow Task[OLEDB Source[1]]:An OLEDB error has occured, Error code: 0x80040e14.
AN OLE DB records is available . Source "Microsoft OLEDB Provider for Oracle" Hresult: 0x80040e14
Description : "ORA-00936:missing expression
What could be the problme.how about the support of dynamic query (Oracle) in ssis?
2.Clarification in Lookup.
--------------------------------
How to Pass Parameters to Lookup. (Dynamic sql in Lookup)
example
select * from mastertable where reportdate = ?
here also my source is oracle table
Thanks
Jegan
Hi,
I am trying to write a SSIS package which will pull data from Oracle.
Problem is that the server where I will be installing it does not have Oracle client installed.
Can anyone tell me which driver I should be using?
Thanks in advance.
Hi pals,
I have a small problem in parameter mapping for Execute SQL Task.
I am using a delete statement with 2 conditions.
Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider.
I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for
c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR.
i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype.
This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also,
I set the property RetainSameConnection = TRUE for oracle connection manager.
I am not able to trace this logical error.
The same is working fine in my local machine.
But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping?
What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and
inside the parameter mapping.
Is there any way to see/look the sql statement which is formed after Parameter Subsititution inside the log file?
Can we print the SQL Statement Formed by the Execute SQL task inside a script task ?
Any help would be greatly appreciated !
Thanks in advance
I have several SSIS packages that test out without problems on my dev box when connecting to an Oracle server, both from inside BIDS IDE and from the command line with DTexec. The problem happens when running these packages from the app server that will be used for production; the packages get through the validation, preparation and pre-execution phases but crash when starting the execution phase with this error:
" Code: 0xC0202009
Source: Import Level tables Level1 Source [1261]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01861: literal does not match format string".
I've Googled this and it often refers to a date issue. I am not writing to Oracle but importing to SQL Server by using SSIS import tasks, and my question is why would this work without problems from my box but not on this app server? Both machines have the same version of Oracle client installed. My box has the client SQL server with BIDS and the app server only has the full version of SSIS without SQL Server installed. At this point I'm trying to determine if this is an Oracle issue or SSIS. Any ideas?
I've read al lot of the post on this one. Mine seem very simiular.
I create the SSIS package with the wizard and save sensitive data with password. When the SSIS wizard completes and executes the package everything works. However when I attempt to execute the package with dtexec it fails with "
Source - Query [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. "
This even happens also when I attempt to run the package in SSIS after it was created. However in SSIS designmode I can open my query source , parse the query, and prview the data. However when I attempt to execute the package no dice. I'm sure this is a password issue but I have now idea where to fix it.
FYI,
Have tried the following.
SourceConnectionOLEDB check option Allow saving of passowrd
Package Exlporer / Connection Mangers/ SourceConnectionOLEDB shows password save with ******
Have Enabled package configurations with a XML file all values save to file.
Thanks,
Z
is it possible to execute Oracle procedure from within SSIS?
thanks
Hi
I have a number of scripts that run against an oracle server to retreive data to manipulate before populating a sqlserver database. I am connecting using an Odbc connection and using the DataReader Source to read from the Oracle table. It all seems to work ok.
When I have tried to extract data from an Oracle view in the same way it doesn't seem to work. The error message mentioned the PrimeOutput() method and error code 0xC02090F5. The view is very big so is it possible that the connection simply timed out?
Any ideas?
Thanks
B
Hi,
I used OLE DB for oracle connection provider, it takes only Server name, User id, Password but along with it,
I want to give it Database name like in OLE DB for Sql Server.
Is it possible to provide it in some other way, so that i can put DataBase name directly also.
Thanks
Hello All,
I am trying to run the below query in SSIS, However it does not work, but when I try to run the same query in Oracle client it works fine. Here is the following query:
select 'AAA-'||OWNER AS SOURCE,
table_name,
column_name,
SUBSTR(data_type,1,50) DATA_TYPE ,
SUBSTR(decode(data_type,'NUMBER', DATA_PRECISION, DATA_LENGTH),1,20) DATA_LENGTH
from all_tab_cols
where owner='XXX'
ORDER BY TABLE_NAME, COLUMN_ID
Here ARE the following errorS I get when running from SSIS:
[ORA_AAA_XXX [147]] Error: There was an error with output column "SOURCE" (612) on output "OLE DB Source Output" (157). The column status returned was: "The value could not be converted because of a potential loss of data.".
[ORA_AAA_XXX [147]] Error: The "output column "SOURCE" (612)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "SOURCE" (612)" specifies failure on error. An error occurred on the specified object of the specified component.
Any help?
Regards,
Raju
Hi,
I believe this question has been covered quite a bit, but none the less I wanted to ask it as I still have no resolution at the moment. I am consuming a table from Oracle which has a data type of NUMBER. When I use a .Net Provider to consume the data, the SCALE defaults to 0 for these select columns and thus we lose any decimal point information for these columns. I have tried using both the .Net Provider and the .Net for OLEDB providers for ORACLE. Both seem to suffer from this. The SSIS server itself is a Win 03' server on x64 hardware architecture. Also, when trying to use the Oracle Provider for OLEDB it throws a design-time error stating "Error in Initializing Provider".
Thanks!
Derek
I need to extract data from SSAS' cubes into a SQL Server table.
I already read examples using Linked server (with openquery), SSIS, etc. However, the result always return as many columns per dimension as levels. I need to extract all members of a dimension in a column. E.g., when excecuting the following MDX query in Adventure Works 2014:
select [Measures].[Sales Amount] on columns,
Non Empty [Date].[Calendar].members on rows
from [Adventure Works]
I would like to get this result (MDX query in SSMS), but with keys displayed intead of names:
But I get this (MDX thru openquery or SSIS):