Using Transaction On SSIS Package Failed On Cross Domain.
Jul 25, 2007
I want to use Transaction(MS DTC) in SSIS package across domain. It's working fine if both the servers are in Corpnet microsoft domain but failing it one of the server at extranet microsoft domain. I did all the required settings for MS DTC service to run for distrubuted transaction and in SSIS package did the "TransactionOption" property for the container object to "Required" and for all inner tasks to "Supported". Is it possible or a Security voilation which won't allow to do through SSIS package.
Example: I have a database on Extranet server and a database at Corpnet Server.
Sql Job will pull the data from Extranet Database to Corpnet database through SSIS package and update back to Extranet database. Job will reside on Corpnet server.
SSIS package is failing with the error message: The AcquireConnection method call to the connection manager "<Connection Manager name>" failed with error code 0xC0202009.
Any special setting do we require for this. I did the following setting on both the servers:
Ø MS DTC should run on both the servers under €œNetwork Service€?
Ø Set the following on both the servers(ExtranetCoptnet) to run on a Distributed Transaction:
§ Go to "Administrative Tools > Component Services"
§ On the left navigation tree, go to "Component Services > Computers
§ €œMy Computer" (you may need to double click and wait as some nodes
need time to expand)
§ Right click on "My Computer", select "Properties"
§ Select "MSDTC" tab
§ Click "Security Configuration"
§ Make sure you check "Network DTC Access", "Allow Remote Client",
"Allow Inbound/Outbound", "Enable TIP"
§ The service will restart
Note: If I will chage the Extranet server to Corpnet then it's working file for me.
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
SQL Server 2005 SP2, installed as a default instance at the domain controller. SSIS connection failed with the message Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The RPC server is unavailable. No firewalls, client and server in the same subnet, ping is ok. I suspect the issue is similar to described here: http://support.microsoft.com/kb/940232 I've given the user all the rights to DCOM MsDTSServer, but I cannot include him to the local "Distributed COM users" group because the domain controller doesn't have local group at all. I have included the user into the "domain admins" group, after that user got a connection. But this is not good, you know what I mean. Does any other solution exists, without reinstallation SQL Server to another server or giving the administrator's rights to the user? Thank you.
Is that possible to execute SSIS packages from a remote SQL Server 2005 in another domain at local computer (Windows XP)?
Can I use SQL authentication to connect to the remote SSIS? My problem is, the user who execute the SSIS is not allow to access to SQL server directly. Is that possible to code everything in a batch file instead?
I tried to use web services to execute the remote SSIS but it always return "authentication error"?
I built SP's to create the Distributor/Publisher and Subscriber parts of Snapshot Replication. All run fine on 2 SQL2K installs on the SAME Domain.
BUT if I try to cross to another Domain (SQL2K as well) = NO JOY.
Error @ Subscriber doing a PULL: "Cannot connect to Distributor..."
Tried using sa, administrator, NEW Local user, etc. & continue getting the error. ALSO tried changing the Login of SQL & SQL Agent Services to the SAME Login on BOTH machines.
We are using SQL Server 2012 . We have configured the Database mail Services. Issue is, the mails are going to only inside the domain not going cross domain Email address like hotmail,gmail and etc. But from outlook client the mails are going to cross domain Emails. Same issue is in SSRS Email Services also. We have checked the SMTP Server, we could not figured it out.
Lets say I have a single instance SQL Server on a 2 node cluster with node names Server X and Server Y. These are part of Domain A.
SQL Agent Account runs under service account - DomainASQLAct.
Now I have Server Z which is a standalone SQL Instance on Domain B and there is no trust between domain A and B, not even one way trust.
Even though I dont have trust, I need to configure log shipping for the SQL Instance which is clustered under Domain A to a standalone box in Domain B.
Microsoft recommends Local Account(SQL Agent) to be used for Cross Domain Log Shipping. Also when there is no trust, MSFT recommends to use the same login name and password, however as my setup includes a cluster and cluster cannot have local account I'm not sure what will be the best strategy to follow here.
I have service broker working 100% with an initiator - forwarder - target, all in the same domain using windows authentication on the endpoints, for all instances' the sql server service run under the same domain account, which in turn is granted connect on the various endpoints. This all works 100%
However i have a scenario where the initiator will be in a different trusted domain.
I need to know if i am correct in thinking that the initiator sql server servcie account can run under DomainAsqlservice, the target instance sql server servcie can run under DomainBsqlservice, then on the forwarder i simply grant connect on the forwarder endpoint to both DomainAsqlservice and DomainBsqlservice.
We have two domains in our organisation, both with transitive trust of one another.
In our main domain we have a report server which is available for all users across both domains to access and use. Most of the time there isn't a problem but I'm having a bit of an issue with users from our second domain accessing a linked report containing 13 subreports.
The main report is fine and all users can view this, however, all subreports show an error message to users in our second domain.
As a bit of an experiment I have even given one user Content Manager rights on the report server but this hasn't solved the problem. I have checked that permissions are correct on ther server, folders and data sources dozens of times and cannot find any reason why second domain users are having this problem.
If anyone has any suggestions on how to solve this I would be grateful for help.
Hi, I am a newbie in SSIS. I'd like to hear your recommendation to build the whole SSIS package as one transaction. In other words, how we can rollback all DML operations (insert/update/delete) that are applied in different parts of a package if for any reason the package failed to complete?. Something like rolling back a proc if the proc failed.
I am running a package in which all tasks participate in a transaction. One task is a ForEach Loop container that executes 1 SQL INSERT statement per loop. The Loop runs well over 100 times in order to normalize a very, very, very wide table.
It seems that at a certain point, the Loop task will fail. I've tested a few different scenarios and they all fail at the same point... the 98th loop.
The error message is below:
[Execute SQL Task] Error: Failed to acquire connection "ADO.NET Connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
I'm guessing that there is a limit to the number of connections that can be started at any one time. But I figured SSIS wouldn't start a new connection for every SQL command.
Any insight on this issue? Anyone have an idea for a work around?
[Connection manager "CLRDB_Connection"] Error: An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'CLR.Test'.".
I got this error i cant resolve this. i deployed the package to other server using sql authentication. and i create the package using windows authentication on my local computer. i try to run my package in my local computer and i got this error.
I'm trying to create a SSIS package. I have used OLEDBSource adapter to get the source table's data and transferring the data to an OLEDBDestination adapter. I tried but I'm facing the problem in mapping the metadata contents.
My code: //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
static void Main(string[] args)
{
// Create a new package
Package package = new Package();
package.Name = "OLE DB Transfer";
// Add a Data Flow task
TaskHost taskHost = package.Executables.Add("DTS.Pipeline") as TaskHost;
taskHost.Name = "Transfer Table";
IDTSPipeline90 pipeline = taskHost.InnerObject as MainPipe;
// Get the pipeline's component metadata collection
Refering to my previous post I've a package which easily run when transaction mode is Supported but when i put it to Required and All DFs are supported inside the sequence container it won't run.
Well technically it goes and pass step 1, so it goes to green but regardless of what i put in the 2nd DF it won't run. It just hangs in there. When i check the component service and check DTC, the transaction would be running but never commited.
I have done most of the things about DTC and configuration with the MS articles as this package was failing before but now it just sits at this point.
I am having a simple ssis package. In that i have an sql task that will insert a record in to the database. i find that if i use a simple OLEDB connection it works fine. but the problem comes here when i change the connection string with an valiable. Once i assign the same connection string to a valiable and assign the variable as expression, there after i encounter the following error.
[Execute SQL Task] Error: Failed to acquire connection "DB connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
I am struggling with this for a long time.
Any of you plz suggest me a solution for this problem
I'm trying to come up with the best way to build some C# Unit tests for an SSIS package I've built.
My C# code does the following
1. Creates a Transaction Scope using System.Transactions
2. Puts some source data for my package into a table that the package will read
3. Kicks off the Package using System.Diagnostics.ProcessStartInfo
Im getting a Transaction TimeOut execption which I beleive is caused because the Package can't read the source data I've inserted becuase the package has not joined the transaction.
So the question is - can you call a run a package and make it participate in a transaction that you have created outside of the package?
I have an asp.net web application and a web service (both of them are created in VS 2005 - asp.net 2.0). They are located on the same web server. In both web.config files, I have set <authentication mode="Windows"/> and <identity impersonate="true"/>. Also, configured the IIS settings to use Integrated Windows Authentication and unchecked the Anonymous access (for both). The web service is called from the web app, so I have to pass credentials for authentication to the web service. The web service loads and executes a SSIS package. The package and all the other sql objects are located in the sql server 2005 (windows server 2003 - the same server as the web server).
When run the web service from develop environment (vs. 2005), I get whatever I expected. When call it from web application, however, the package failed (no error message).
In the SSIS package, there are three connection managers €“ · A: Microsoft OLE DB Provider for Analysis Services 9.0 à connectionType=OleDbConnection · B: .Net Providers SqlClient Data Provider à connection type=SqlConnection · C: Native OLE DB Microsoft OLE DB Provider for SQL Server à connectionType=OLEDB
After ran the web application and check the sql database, I can tell that the package was reached and when through the first two steps (clear some records in table_1 and extract some records from table_2 ) which relate to the connection manager B €“ ADO.Net connection. The remaining steps failed which are related to the connection managers A & C.
From SSIS package log file, found that the user credentials (domain and username) were correctly passed from web service to sql server 2005 at the first two events, but the credentials (or operator) changed from domainABCuser123 to NT AUTHORITYNETWORK SERVICE after packageStart. Then, it complains €¦ either the user, domainABCserverName$, does not have access to the database, or the database does not exist.
I think the credentials are passed ok but some setting related to the Analysis services are not correct - complaining start from there. Any clues?
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
The attached image below shows the steps and its set up to fail if not successful.However there was a metadata validation issue in step one (underlying database field had changed), yet the job kept emailing stating it was successful.It appears to have just carried on with the other steps despite step one failing.
I created a SSIS package using VS2005 with the "ProtectionLevel" set to "DontSaveSensitive" . I executed the package and it completed without an error. I then built the package and deployed it to the SSIS inside the folder "MSDB". I run the pakage in SSIS and it worked perfectly. Then I created a job in SQL Server Agent and have it run in a per-set schedule. It failed to run withthe following error:
Message Executed as user: SRVSOUDB01SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:11:02 PM Error: 2008-05-12 22:11:03.17 Code: 0xC001401E Source: STDM Connection manager "Target_AS_STDM.abf" Description: The file name "\Svmppodb01OLAP DataSql DataBackUpAS_STDM.abf" specified in the connection was not valid. End Error Error: 2008-05-12 22:11:03.17 Code: 0xC001401D Source: STDM Description: Connection "Target_AS_STDM.abf" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:11:02 PM Finished: 10:11:03 PM Elapsed: 0.422 seconds. The package execution failed. The step failed.
The error mentioned the step in SSIS Package that requires to copy the backup of the OLAP database file "AS_STDM.abf" from the Source Server location (local processing server SRVSPOYDB01) to the Targer Server location (remote production server SVMPPODB01) "Svmppodb01OLAP DataSql DataBackUpAS_STDM.abf". This step worked in the SSIS(SRVSOUDB01) when executing there. Why it is not working in Sql Server Agent(SRVSOUDB01). It also works in VS 2005.
I have a SSIS package which run well when stand-alone. However it was failed when executed from .NET web application. It just simply return Failure. Code snip below:
Dim packagekgResults As DTSExecResult ......... packagekgResults = package.Execute()
I have created a package using SSDT2012 studio and it is failed to deploy under sql server 2012 sp1.Data inserting into sharepoint from sql server 2008 r2 database.The error says:The package failed to load due to error 0xC0010014.
I'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
I am getting the following error message when I try to execute a SSIS package from an asp.net page written in C# 2.0. What I am trying to do is basically just click on a button in the web page and it will execute the package. The code to execute the package is pretty simple. I pass the path of the DTS package stored in the local folder. This works fine in the machine where SQL2005 is installed locally. But it fail when I have a seperate Web Server and SQL Server. Any ideas? Do I have to install SSIS or SQL2005 on a web server as well?
Thanks
static public string Execute_SSIS_DTS(string DTS_Path)
{
Microsoft.SqlServer.Dts.Runtime.Application app;
app = new Microsoft.SqlServer.Dts.Runtime.Application();
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.
Line 226: static public string Execute_SSIS_DTS(string DTS_Path) Line 227: { Line 228: Application app = new Application(); Line 229: Package package = app.LoadPackage(DTS_Path, null); Line 230: DTSExecResult result = package.Execute();
[COMException (0x80040154): Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.] Microsoft.SqlServer.Dts.Runtime.Application..ctor() +43
[DtsPipelineException: Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.] Microsoft.SqlServer.Dts.Runtime.Application..ctor() +169 Utilities.Execute_SSIS_DTS(String DTS_Path) in c:InetpubwwwrootMasterTablesApp_CodeUtilities.cs:228 MasterTables_Admin_MasterTables_LOINC_External.btn_SyncLISTest_Click(Object sender, EventArgs e) in c:InetpubwwwrootMasterTablesMasterTables_CustomMasterTablesCustom_LOINC_External.aspx.cs:98 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +114 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +141 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3215
I have SSIS packages created to import .xls files into sql tables. I now have vb.net code within which I am trying to execute individual packages whenever my code notices the .xls files being deposited within a network folder. When I try to run my code I get the error message:
Assertion Failed:Abort=Quit, Retry=Debug, Ignore=Continue at STrace.ReadTraceValues() at STrace..cctor() at STrace.Trace(String strComponentName, String strLine) at ManagedHelper.GetNextManagedInfo(DTS_Managed_INFO&nextManagedInfo)
here is my code:
Sub RunPackage(ByVal pkgCMD As String)
'
Dim app As New Application
Dim pkg As New Package
Dim pkgResults As DTSExecResult
'Dim pkgevents As IDTSEvents
'
pkg = app.LoadPackage(pkgCMD, Nothing)
pkgResults = pkg.Execute()
The error occurs during the pkg=app.LoadPackage(pkgCMD, Nothing) statement. Any idea of how I determine why the SSIS package will not load thru my vb app? It runs fine if I load the SSIS package in SSBIDS. Thanks for any help or guidance.
When i give PortalUser a sysadmin server role, it works. But i don't want to give PortalUser a sysadmin role. Any suggestions? Is sysadmin role required to access a remote server using Sql server authentication?
I am creator of this package. This package used to work fine both from studio and deployed on server. I come back this project, but can't get package even runing debug in studio with protectionLevel set as EncryptSensitiveWithUserKey or EncryptSensitiveWithPassword.
Does anyone see this problem before?
Here is my error message:
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1071611876,0x,The AcquireConnection method call to the connection manager "GEODB" failed with error code 0xC0202009.
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073450985,0x,component "get parcel from Sub Struct" (75) failed validation and returned error code 0xC020801C.
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073450996,0x,One or more component failed validation.
OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073594105,0x,There were errors during task validation.
I have a pretty simple SSIS package that fast loads a 100 million record table into a SQL Server 2008 table on a daily basis. This normally runs fine and completes in about 1 hour. As this is perhaps one of our largest running SSIS packages, about once every 2-3 weeks this SSIS will fail/drop connection. Once it fails, the large number of records will start rolling back. This rollback process can take 1+ hours so I cannot even restart the failed SSIS package immediately. This is a problem.
I am looking for a solution or option so I do not have to wait on that rollback to restart this particular, long running SSIS package. Is there an option/setting to leave the partial data set committed and not rollback? Then I could just restart the SSIS package immediately or set it the SSIS to auto-restart 1 time on failure. The first step in the SSIS does a truncate of the destination table.
In BI Tool SSIS Packages run fine and get data From Oracle and Save it in SQL Server.
Package Protection Level is EncryptSensitivewithPassword.
In BI tool when i open the package it ask password and then run fine.
If i change the Protection Level to Dont save Sensitive,
It does not run fine in even BI tool.
It is fine if i use EncryptSensitivewithPassword.in BI Tool and run it.
Now the problem is that i need to run this package through SQL Job.
so Job give error
"Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information."
