Using A Date Filter In Query With (&< Or &>) Fails But With (=) Works ???
May 11, 2006
I have a simple ASP.NET application that allows the user to enter a Query in a TextArea and submit that to the database. Queries that contain Integer, String or other filters seem to work fine, but when the Query contains a Date or DateTime I have problems.
Here is an example that works fine in Query analyzer but fails when executed in ASP.NET.
"select top 10 * from Subscribers where StartDate < '09-03-2002'"
In Query Analyzer no problem, in ASP.NET I get this error...
Line 1: Incorrect syntax near ';'
However if the Query uses '=' instead of a '<' or '' then it works without error
"select top 10 * from Subscribers where StartDate ='09-03-2002'"
I have a query that works fine but fails as a sproc. QUERY: SELECT UserName, ProfileId, FirstName, LastName FROM dbo.CustomProfile JOIN dbo.aspnet_Users ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId WHERE UserName = 'Brown'
SPROC: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[GetProfileId] @UserName nvarchar AS SELECT UserName, ProfileId, FirstName, LastName FROM dbo.CustomProfile JOIN dbo.aspnet_Users ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId WHERE UserName = @UserName The query returns results. In SQL Server Management Studio when I execute the sproc and enter the value Brown the sproc returns no values; i.e. 0
I can run the following query in Management Studio, but get the error listed below when I run it from the data tab in Reporting Services:
declare @starttime as datetime declare @endtime as datetime declare @timezone as integer declare @date as datetime
set @timezone = 1 set @date = '5/1/2007'
set @starttime = dateadd(hh, @timezone, @date) set @endtime = dateadd(d, 1, @starttime)
select @Starttime, @endtime from site
Error Message:
TITLE: Microsoft Report Designer ------------------------------
An error occurred while executing the query. The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure.
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure. (Microsoft SQL Server, Error: 134)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=134&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
What I am trying to accomplish is the ability for users to select which time zone they want the data in the report to display in. To do this, I created a timezone parameter that has the offset from Central Time (which is how all data is stored in our database).
how to add a date range filter to my database query. I want to be able to enter a date into ("E,6") and have VBA pull data >,= to that date range according to my "OPENED_DATE" dates. My code is pasted below:
I have a DTS to copy data from Oracle to SQL Server. When I logon to SQL Server box with a userID xxx, I can run the DTS from EM and it works perfectly fine but when I schedule the DTS as job, it fails.
SQL Server agent is running with same account "xxx" DTS connects to SQL Server with sa authentication Job owner is same account "xxx"
Job error log
Executed as user: DOMAINNAMExxx. ... Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart... Process Exit Code 6. The step failed.
I copied the DTS to another one and scheduled it
This time I got the error log Executed as user: DOMAINNAMExxx. ...... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnStart: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnError: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step, Error = -2147467259 (80004005) Error string: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. Error source: Microsoft OLE DB Provider for Oracle Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (. The step failed.
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22 Code: 0xC0202009 Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle. I have oracle 9i client installed on the server and sql server is 2005.
I have a SQL DTS package that imports a text file as one wide column into a two column SQL table, one is an identity seed. So essentially I import then parse the data using the index key as it is 3 seperate lines of data. All works fine by running the DTS package using execute. When I schedule this as a job it fails. It indicates that I have additional white space after a column. Any thoughts on why this can ocurr?
Hey all. I've got a DTS package that's scheduled to run after business hours on the last day of the month. This package copies some tables from an offsite SQL Server, then runs through a series of SQL Statements and finally exports an excel file with the results.
My problem is that the DTS will run if I manually start it, but the scheduled job always fails. Of course, the error I get is that the job failed at step one, and I have no other info.
I'm not a heavy DBA (mor eon the client app side of things), so I'm unsure as to how I can dbug this. Any help would be greatly appreciated!
I have created a DTS task that i can right click on and execute and it works fine on the server. However when i try to schedule the task and run the job from SQL Server Agent, i get the following error.
Error Source= Microsoft VBScript runtime error Error Description: ActiveX component can't create object: 'CuteFTPPro.TEConnection' Error on Line 31
the error occurs on the following line Set MySite = CreateObject("CuteFTPPro.TEConnection")
How is it possible that i can execute my package but cannot schedule it? i am executing the package from physically sitting at the server.
This statement failsupdate ded_temp aset a.balance = (select sum(b.ln_amt)from ded_temp bwhere a.cust_no = b.cust_noand a.ded_type_cd = b.ded_type_cdand a.chk_no = b.chk_nogroup by cust_no, ded_type_cd, chk_no)With this error:Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near 'a'.But this statement:select * from ded_temp awhere a.balance = (select sum(b.ln_amt)from ded_temp bwhere a.cust_no = b.cust_noand a.ded_type_cd = b.ded_type_cdand a.chk_no = b.chk_nogroup by cust_no, ded_type_cd, chk_no)Runs without error:Why? and How should I change the first statement to run my update. Thisstatement of course works fine in Oracle. :)tksken.
I have written a intranet page that writes some info into a sql database, basically following the 'SQL Server 2005 Express for Beginners' video.When I debug the application from within 'Visual Web Develop 2005 express' it works fine entries are entered into the DB and I can then edit the db using the admin page.But when I host the site using IIS I doesn't work, submissions to the database seem to fail I can see the DB in the admin page but if I try to edit them or delete them it fails. What could I doing wrong could I be missing a setting in IIS? Any ideas??Here's my webconfig if that helps at all: <?xml version="1.0"?><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0"> <connectionStrings> <add name="studentprofilesConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|studentprofiles.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <roleManager defaultProvider="AspNetWindowsTokenRoleProvider" /> <compilation debug="true" defaultLanguage="c#" /></system.web></configuration>
I'm new to DTS packages, but managed to create one that successfully empties a table in SQL Server then imports data from a Foxpro file on another server into it. It runs fine if I execute it from DTS, but fails if I schedule it to run in SQL Server Agent (using the "Schedule Package" option in DTS). I think the relevant portion of the error returned when the job fails is:
Error string: [Microsoft][ODBC Visual FoxPro Driver]File 'hrpersnl.dbf' does not exist.
The file does exist. I also tried to execute it from a stored procedure, but got a similar error. Any thoughts on why it runs one way but not the other?
Hi,I am having a problem with a replication over a Modem-Connection,which works fine over LAN. Has anyone experienced this problem before?Settings are:2 SQL Servers 2000, SP3on Windows 2000Publischer Database ist about 3GB, Subscriber DB about 1,5GBPublisher and Subscriber are connected via 56Kbit Dial-Up--> The Replication worked fine now this way for about 6 Months now!overall the publisher has about 20 Subscribers all connected viadial-up and they all work fine.Behavior now is like this:- Dial Up works fine- Synch starts- Synch takes some time (Upload works fine)- Synch fails- Error Message(german):Der Prozess konnte die Zeilenmetadaten auf 'Subscriber' nichtabfragen.{call sp_MSgetmetadatabatch(?,?,?)}Allgemeiner Netzwerkfehler. Weitere Informationen finden Sie in derDokumentation über Netzwerke.Der Prozess wurde erfolgreich beendet.If I connect the Subscriber-Server directly to the publisher servervia LAN it all works fine.My thesis is, that there might be some kind of "timeout" or something,as it cant be the dial-up network, because we tried different modemsand different server locations. And it all works fine on most of theother connedted subscribers. Only 2 other very big subscribersexperience the same problem, therefore i assume it could havesomething to to with slow connection speed, timeouts and an inabilityof the SQL server to handle this.Anyone seen this before? Anyone can help me?Thanks and Best Regards,Gerd
I can use Http connection to Analysis Services 2005 from Excel but when I try to use IIS it fails. AS and IIS are on different machines and not in the same domain.
In the event log of the server with AS i can see following event:
Event Type: Information Event Source: MSOLAP ISAPI Extension: \?C:Inetpubwwwrootolapmsmdpump.dll Event Category: (269) Event ID: 10 Date: 5/20/2008 Time: 10:17:02 AM User: N/A Computer: ******* Description: The description for Event ID ( 10 ) in Source ( MSOLAP ISAPI Extension: \?C:Inetpubwwwrootolapmsmdpump.dll ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .
I assume it's permission issue. Excel and IIS must be using different user to connect to AS. I tried with different authentication methods on the iis but without success.
How can I make IIS connect with proper permissions?
When attempting to connect to Reporting Services (SQL2005) with FQDN, the logon prompt fails after 3 attempts: http://sqlReportServer.mydomain.net/ReportsManager/Pages/Folder.aspx
If use the IP, it prompts for credentials and works: http://192.168.0.23/ReportsManager/Pages/Folder.aspx
I have checked the SQL instance name and seems good. RDP by FQDN works fine, etc. Any hints? CW --
Hi, I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:24:30 AM Error: 2008-03-18 09:24:32.54 Code: 0xC0202009 Source: IMALCRM Connection manager "IMAL SRC" Description: An OLE DB error has occurred. Error code: 0x800703E6. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H result: 0x800703E6 Description: "Invalid access to memory location.". End Error Error: 2008-03-18 09:24:32.54 Code: 0xC020801C Source: Load Fund Detail V_FUND_DETAIL [16] Description: The AcquireConnection method call to the connection manager "IMA L SRC" failed with error code 0xC0202009. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0047017 Source: Load Fund Detail DTS.Pipeline Description: component "V_FUND_DETAIL" (16) failed validation and returned er ror code 0xC020801C. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC004700C Source: Load Fund Detail DTS.Pipeline Description: One or more component failed validation. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0024107 Source: Load Fund Detail Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:24:30 AM Finished: 9:24:32 AM Elapsed: 2.078 seconds
I have some code in a SQL CLR stored procedure that calls out to a web service at UPS to obtain tracking information for a package.
The code fails on the last line, in the call to WebRequest.GetRequestStream(), with the following exception:
"System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetRequestStream() at UPSTracking.TrackShipment(String TrackingUri)"
This same code works just fine when not running in the SQL CLR assembly. The assembly is marked as External, but I've also tried marking it as Unsafe, which did not work either.
Any suggestions on what the problem might be or how to troubleshoot this further would be greatly appreciated.
I have an SQL statement that, when run through SQL Server management studio works fine. However, when I run it on my ASP page, it doesn’t update the data! I have tried both as a stored procedure and as a simple commandText update statement. All I do is simly update the value of a column based on another column – nothing particularly complex: update customer set dateChanged = System.DateTime.Now.ToString("dd-MMM-yyyy"), CURRSTAT = 'Active',custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END,cust_Changing_To = NULLFROM customers_v WHERE CURRSTAT = 'Changing'
As you can see, nothing that complex. The line that is causing the problem is the case: custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END all it does is if another nullable integer column is not null, sets it to the value of that column, else it retains its existing value. Like I say, this works in Management studio, but I cannot get it to execute programatticaly from an asp page. No exceptions are being thrown, it just doesn’t update the data. Any ideas? Thanks
I have an ASP.NET webform:This connection works: "Server=localhost;uid=sa;pwd=;database=pubs"but this connection DOES NOT work: "Server=dnrsqlt1;uid=sa;pwd=;database=pubs"dnrsqlt1 is a sql server my network.Do I have to do something to users ASPNET or IUSER_Machinename on the remote machine
I am having the most baffling problem with DTS.... :confused:
I have a set of ActiveX transforms that execute on my customers flat transaction data files, destination a single database table. Since they switched to a new method of generating the flat file using SAS, the DTS package mysteriously will fail at a couple select records. The error is always the same, and turning on error logging in DTS yielded this:
Step 'DTSStep_DTSDataPumpTask_1' failed
Step Error Source: Microsoft Data Transformation Services Flat File Rowset Provider Step Error Description:Too many columns found in the current row; non-whitespace characters were found after the last defined column's data. Step Error code: 80043013 Step Error Help File: DTSFFile.hlp Step Error Help Context ID:0
The exact same file parses all the way through on my laptop, with the same DTS package. Tests have revealed no strange characters or whitespaces in the data file, not at that record (running a Test... on any of the active x transforms will fail at row 515186 always, until that row is deleted and it fails on some subsequent row - this iteration went on at the customer site until about 5 rows were deleted this month and it finally worked), not at any other records. My database and the customer database are both using the same, default character set.
The only microsoft KB article referencing anything resembling my problem is http://support.microsoft.com/default.aspx?scid=kb;en-us;292588 but this does not hold because I am not specifying fixed width, but rather comma delimited.
If anyone has any ideas about what other environmental variables are coming into play here, please let me know - I'm at the end of my rope. I believe we are both patched up to SQL 2000 SP3. They have an XP client connecting to a 2003 server; I have an XP client/server. Neither machine has the NLS_LANG environment variable set.
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.
The error that I'm getting is this:
[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.
[rsNone] An error has occurred during report processing.
Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!
I have a stored procedure which is run through MS Access (yuck). It does not appear to fail, but it does not populate certain tables, and is also rather complex. I did not write it, and am trying my best to fix it. However, when I run the same procedure with the same parameters from within Management Studio (database state is the same, I restore from backup before trying out each execution) it populates the tables correctly. I have profiled both executions (from MS and from Access) and it is running with the same NTUsername, and thus the same permissions. The process used to work and then some changes were made to the DB which seem to have broken it from Access. As far as I know, the Access code has not changed, although it may have done so. The proc call from Access uses the same parameters, and does not throw an error, although it does not appear to close the connection to the DB (I'm looking into this). Access uses an ODBC connection to connect to SQL Server.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
Hi, I wasn't sure if this was the correct place for this question since it involves both T-SQL and ODBC but i thought I would start here. A little system information to start. I'm using SQL 2005 on a Windows 2003 server. An application is connection to my database through ODBC and adds records to a table one at a time (no batches).
I have an Instead of Trigger created on a table that tests for the existence of a valid foriegn key. If the key doesn't exist in the related table I want to insert the record into a "bad records" table.
My trigger works perfectly when I add a bogus record to the table directly in the SQL Management Console table view or thorugh an insert query. However, when I try a live test with an application connected via ODBC that is adding records to the table the trigger fails to catch the errors and will not update the "bad records" table. If a record is legitmate (i.e. has a valid foreign key) then the final bit of trigger code fires without a problem.
Does anyone know of a problem with Instead Of Triggers working on multiple tables when connection through ODBC? It just seems weird that the trigger works perfectly in one situation but then doesn't work in another.
I am extracting data from an Oracle database and have installed the latest x64 ODAC. When I run the 64 bit dtexec in cmd the package runs fine with no errors, but when creating and executing a SSIS job in the agent it fails. I've tried creating the job using CmdExec as well and I get the same errors:
Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:12:43 AM Error: 2007-08-15 11:12:45.63 Code: 0xC0202009 Source: Load Dimension Data Connection manager "ora" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x800703E6. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x800703E6 Description: "Invalid access to memory location.". End Error Error: 2007-08-15 11:12:45.65 Code: 0xC020801C Source: CopyCustomers CustomerSource [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ora" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2007-08-15 11:12:45.65
The CmdExec job step uses the _exact_ same command as the one I execute successfully in cmd: "c:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
I have managed to find two work arounds, but they are quite ugly:
1) Schedule the package execution using Windows Task Scheduler, basically create a bat file which runs the package. 2) Schedule the package in SQL Server agent, but as T-SQL script and use xp_cmdshell, i.e. EXEC xp_cmdshell 'dtexec /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW'
Both work and use the 64 bit dtexec. Not that elegant though..
CmdExec and the 32 bit version of dtexec works, but is not good enough for me since we bought new hardware and 64 bit software just to be able to address more memory. Has anyone managed to execute a SSIS package successfully using the agent and the 64 bit OraOLEDB.Oracle.1?
Any help would be greatly appreciated. Thanks!
Btw, I am using Windows Server 2003 x64 and SQL Server with SP2.
I have a date filter, and I default it to first day this month and last day this month under relative date, when I run it it givis me error:
The Value expression for the report parameter €˜FromDate€™ contains an error: [BC30456] 'Date' is not a member of 'Integer'. (rsCompilerErrorInExpression)
We have a rather large environment and have just a couple of boxes out there that we are getting cannot begin distributed transaction on inserts and updates but works fine on selects. Inserts and updates work fine outside the begin tran / commit so it's definitely DTC
We have checked the configuration on and the source box is set to No authentication required same for destination.
We have: Verified credentials running the service, changed them, same problem. Uninstalled and re-installed MSDTC per Microsoft instructions.
Have run all the tools for checking DTC DTCPing etc and followed those procedures which typically in the past has resolved any DTC issues. Other than swapping out the offending pc for a new one we are at a loss.
The DTS works perfectly when I run it manually. However, when I run itas a job it fails. Before you ask if i'm running it under differentsecurity context. I have already made sure of that. I was logged intothe server through remote viewer, when I created and ran the package,as well as scheduling the job. So the accounts they're running underare consistent. They're the same accounts as the SQL Agent is runningunder and it's the sys admin account.The data source is a Fox pro database with a pull of two tables. I amusing Microsoft OLE DB Foxpro driver as my source connection and OLE DBConnection for SQL Server as my destination. I am doing a simple tableto table transformation. The path of my connection is a mapped Drive:E:Main. There are other packages and jobs within my job queue that arepointing to the same database and they seem to run fine using the abovemapped drive. The ONLY difference between this package and otherpackages are that, they're few months old and this one was created lastnight. I have also enabled logging on this package and here is thebelow error when the job fails:Package Steps execution information:Step 'DTSStep_DTSDataPumpTask_1' failedStep Error Source: Microsoft OLE DB Provider for Visual FoxProStep Error Description:Invalid path or file name.Step Error code: 80040E21Step Error Help File:Step Error Help Context ID:0Step Execution Started: 9/23/2006 11:39:17 AMStep Execution Completed: 9/23/2006 11:39:17 AMTotal Step Execution Time: 0.031 secondsProgress count in Step: 0
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials. Internet Information Services (IIS)
when I attempt to connect to Reports or ReportServer from my desktop, but it works normally when I login with the same userid and run it directly on the server, using IE. It is prompting me for a login 2 or 3 times before failing.
My configuration is:
Report Server system:
Windows Server 2003 R2 SP2 - 32bit
SQL Server 2005 Reporting Services Enterprise Edition Windows & Web Service run as a domain account Database connection is using domain account - not in db_owner, but in RSExec roles Database is on another server, and is Native, not SharePoint integrated Reports & ReportServer are in a separate application pool Reporting Services had SP2 installed before it was configured The Rport Server is a VM
Database server
Windows Server 2003 R2 SP2 - x64 SQL Server 2005 Enterprise Edition 64bit Version 9.00.3200.00
The Report Manager was not working at all, and I discovered that there was no entry in the .Net Framework version on the APS.Net tab in properties for the Reports virtual directory. I am not seeing any errors or anything unusual in the Event log or in the ReportServer log files.
FrontPage 2002 extensions were installed, and then removed. I noticed that this installed a SharePoint virtual directory, and that disappeared when I removed FrontPage extensions.
The domain group my userid is in is in the local Administrators group on the ReportServer system, and I have added this group as a System Administrator and Content Manager through the report Manager.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
