I am new to both Reporting Services and Webservices implementation so I am just trying to use a simple example. I found a Webservice on the internet that returns movie information:
I am extracting RS reports through a WebService: report = execService.Render("EXCEL", null, out extension, out mimeType, out encoding, out warnings, out streamIds);
Some works fine but some are generating the following SoapException:
Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. I set required parameters to their default values. In this specific report I have two required parameters: 1: ReportParameterTime, String 2: ReportParameter1, String
I set them to their default values (ReportParameterTime to "[Czas].[Kalendarzowy].[Rok].&[2007]" - means Time Calendar Year 2007) but I am getting the exception above. I set parameters using this code:
Where parameterValues is a List<ReportExecution2005.ParameterValue>.
When I am using Microsoft.Reporting.WinForms.ReportViewer the report is generated without any problems. I can see one parameter to choose: "Kalendarzowy" (means adj. Calendar) and can select years, the default value is "2007".
What am I doing wrong and how can I fix this error ? Does anybody know ?
I have noticed what seems to be a bug in Reports using an XML Webservice for a datasource.
I have the data source setup and working to query an XML webservice. All fields aren't always populated - so after the intial step that automatically builds your dataset and sets up the field names - I went in and manually added the remaining missing fields (which were blank).
Then I setup the report - dragging/dropping fields from the dataset.
I thought everything was working fine, UNTIL i noticed that IF the FIRST record contains ANY blank fields - ALL of those fields (on every record returned) show blank on the report.
For example my webservice might return something like this:
But when my report actually runs, it doesn't show any value for the second record:
My Report Child_Name Child_ID Joe Tim
In this case, Tim should actually show the Child_ID value, but apparently because the first record didn't have a value - the report assumes NO RECORDS will have a value and doesn't bother printing them.
But if I run the report so that the first record DOES contain that field - then everything seems fine.
I can see that my Dataset hasn't changed - as it still contains all the fieldnames (even the ones that sometimes return empty).
I am Creating Click Once Windows Application with Reporting Services 2005.I have created Report and Published on Report Server.In my windows application I am successfully able to view my published report through report viewer control.
Now in my application I am getting a dataset from my custom webservice. I want this dataset data to be added to my report as datasource at runtime on Client Side ,as my report is on Report Server.
I have report which uses an ssis package as a datasource. when I develop the report on the visual studio seems like it runs fine. But when I deployed the same report on to the server (report server 64 bit machine) it is throwing me an error:
An error has occurred during report processing.
Cannot create a connection to data source 'DataSource1'.
is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
I have both sql sever and reporting server on the same machine and using windows credentials for both the servers(sql and reporting).Then I believe there is no credential issue.
I created a report model and deployed it. When I open the rpt builder on web I get the following error.
'The selected data source does not have and content available'
Seemed like it would be a easy issue, but I cannot retrieve any data in the rpt model. The datasource I'm using does work for rpts not associated with the rpt model. Any suggestions? It seems like I've missed a step. Thanks, Lisa
I have an xml file that defines the fields in my dataset and I want to hook this up to a report so it can uses those fields when creating a local report. However I can't figure out how to do this. I have an RDLC file but I don't know where or how to hook it up to the XSD file. What do I need to do?
I've got a strange problem with ReportBuilder. I've created a DataSource name Config and a Model name Customers. We been using this model for month and everything was working fine. Now when we try to create a new report we cannot run it. When Report Builder is running i select the "Customer" model. Then i put some fields on the report. When i try to run it i've got an error saying that it cannot create the command for datasource1. What i don't understand is why the error occured in Datasource1 and not in my datasource config ?
When i open the Report Manger and click on the model "Customer" the datasource use by this model is Config. So the problem is not because they're is a mistake in the configuration. I've tried to rebuild my model and datasource then deployed them but i still have the same problem.
Any idea of what the problem is ? I can't figure out
I've severals reports that connect to an ORACLE database, in the RDL file i've the save password but when i open the report again ou i use the sharepoint report viewer the username an password of the oracle database is always asked.
how can i configure the RDL not to ask the password again ?!
We have an application using the winforms report viewer, and it displays all our reports perfectly untill I need to redeploy a report.
As soon as a report is re-deployed a refresh of the report in the viewer shows the following error message:
An error has occured during report processing. The data souce 'mydatasource' cannot be found.
This error occurs irrespective of electing to re-deploy ot not re-deploy the datasource, and the only solution seems to be to close the report viewer down and restart it.
I can reproduce the same problem hosting the reports in a web browser as well, with a slightly different error message
An error has occurred during report processing. (rsProcessingAborted). The data source 'mydatasource' cannot be found. (rsDataSourceNotFound)
Under RS2000 any changes that were made to a report, would automatically be shown to the user if the report was refreshed, without having to close the browser/application down and restart it.
Can I configure RS2005 to prevent this error occuring ? I have read that RS2005 seems to work a lot more within the IIS session for the user and cache things it thinks are usefull, so can I turn this behaviour off, or make it run like RS 2000 did, which provided me with a stable reporting platform?
If I cannot do this from the RS end of the system, is there any advice on using the winforms control to get around this issue - i've only just started using the control so I am not familiar with all its aspects !
I am trying to render a report that I set up with SSRS 2005 from an existing .Net web application. The report takes in a multi-valued parameter (sequenceNums) and displays data accordingly.
This is the url I am passing from the web application:
Upon redirect, I receive the following error "one or more data sources is missing credentials"
I currently have the following connection settings checked for the DataSource used in the report: - connect using credentials supplied by the user running the report - use as windows credentials when connecting to the DataSource
When I attempt to view the report with no parameters being passed in, the report renders properly and I receive a prompt asking me for my credentials.
Do I have to connect to my DataSource using credentials stored securely on the report server?
Thanks in advance.
Sam
ps - i included the url within a code block so no smiley faces would show
I have a data table called STOCKPE which holds stock valuation information at the close of business each day. I wish to use reporting services to extract the data in this table on a daily basis and keep a daily history on the report server. I know I can do this - this isn't my problem.
When I have the history of this table on the report server, can the data that the reports on the report server hold be used as a datasource for another report?
I'm no expert in reporting services, so if this is possible, or if there's a better way of doing it, please use small words and short sentences. No offence intended to all the very well educated SQLRS wizards out there, it's just that I'm not one of them and your answer will be lost on me if you use a lot of abreviations and acronyms.
I have set up a report to access a web service and consume one of its methods - a method that returns a datatable set up with a table adapter. Query code example below:
<ElementPath IgnoreNamespaces="true"> GetAllEnquiriesResponse{}/ GetAllEnquiriesResult/diffgram{}/ DocumentElement{}/Enquiry </ElementPath> </Query> This works fine and returns expected results.
However, when I try and return a set of results from a web service that has a parameter specified I get nothing returned. I have tried various different methods including adding the parameter in the dataset dialogue and specifying the parameter and specifying the parameters as in the code example below but still with no joy. Here is the code example with parameters:
<ElementPath IgnoreNamespaces="true"> GetEnquiryResponse{}/ GetEnquiryResult/diffgram{}/ DocumentElement{}/Enquiry </ElementPath> </Query> When I remove the ElementPath declaration I get back the schema of the table so I believe that is proof that the web method is being contacted but whatever I seem to try I cannot return any results (or the 1 result that the web service should return).
I would be grateful to know if anyone has any ideas or suggestions about this problem.
I make a report to consume a SSIS package, actually I use SSIS to load a datasheet on my Sql Server database, then i expose the aggregate values in a datareader destination. Every work fine in Visual Studio. But when i deploy my report and my Shared Data Source, and I try to run the report i get the next message:
An error has occurred during report processing.
No se puede crear una conexión al origen de datos 'ETLSource'.
The package failed to validate. I dont Understand why, because when i work in BIDS the work perfect, Actually i'm using sql server authentication in my package connection to avoid the mistakes about report credentials.
That is the code of the ETLSource. <?xml version="1.0" encoding="utf-8"?> <RptDataSource xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Name>ETLSource</Name> <DataSourceID>c238d65d-a0f3-48da-ae23-323d6ba13bb0</DataSourceID> <ConnectionProperties> <Extension>SSIS</Extension> <ConnectString>-f "C:TempValidaCambioEfec.dtsx"</ConnectString> </ConnectionProperties> </RptDataSource>
Also I have SSIS and SSRS in the same machine. And I'm using the same domain Account to run SSIS, SSRS and Reports site.
Let say I first use a URL in a web browser to render a PDF file.
Next the data changes.
Now I use the same browser session and call the URL again to render the PDF file; in the second rendering, the PDF report reflects the old data and not the changed data.
How do I force RS, using the same browser session, to render the second PDF file by requerying the data? Has any body come across the phenomenon? If I open a new browser session, the rendered PDF file reflects the new data. I have used Profiler to look at the SQL calls and sure enough, the second URL RS request does not requery the datasource.
I was wondering if there's a way to connect to a shared datasource in the Code section of a report's properties. I want to connect using my shared datasource as defined in my solution and query it to return a value based on user input for a function I need to put there.
Hello All, How to assign the DataSource to Server Report which is stored in the remote machine. Now i need to work on it. If you have any solution please pass on it to me.
I'm trying to create report with datasource as a cube. I'm able to connect to datasource to pull data with a single parameter. But, I'm unable to succeed in creating a cascading parameter. The following scenario: I have a dimension "Period" as Paremeter. The Period dimension is cascaded to year- quarter- month. So, I would like to create a cascading parameter for period as year - quarter - month.
I got a Report Model Project, in which i have created a model of my Database and deployed it on the server...
Then I have a Report Server project for my reports. The reports are using Report Model as the DataSource...
Now in the Report Designer, inside a report, when I define query for Dataset using Report Model , I can't find a way to write a left Outer Join query... It always performs Inner Joins... was wondering ether Report model supports Outer Joins ?... I might achive this using two different datasets but then i'll end up using two data regions e.g. 2 tables, but i don't want to do that... instead I want all of my data to appear in a single table which can reference to single dataset.
Is there a way to define left outer joins using Report model ? I am new to this Reporting Servces and I might be missing something here... would any body please point out that
I have created many shared datsources and reprots at http://localhost/resportserver.
I am trying to access these reports from ReportViewer in the web application. Actually I want to use these reports for different customers by just changing the datsource programitically.
I have scoured the internet looking for someone who has run into this issue with no such luck! Product: Reporting Services 2005 Analysis Services 2005
Our users use Report Builder as an ad-hoc report tool. Data sources for Report Builder come from Report Servers and Analysis Servers.
I have run into issues where a user will select a source for their report that is based on an AS cube. When they select an attribute (field) from a selected entity in the Report Builder Explorer and drop it on the canvas, all entities except the one the field was selected from disappear.
For example:
A cube has a fact table called "Annual Income" with dimension of employee and demographics. In Report Builder, the entities would be listed in the left hand Report Builder Explorer window as
Annual Income Employee Demographics
If I select attributes from Employee or Annual Income, as usual, you will see the related hierarchies of the remaining entities. However, if I select an attribute from Demographics, then the Annual Income and Employee entities just disappear and all I can see is the Demographics entity and its attributes.
Has anyone run into this and if so, any ideas? This is becoming extremely frustrating. I have deleted and rebuild cubes, individual dimensions, and everything else I can think of.
Data Source of the report is AS/400 and I need to create a report in visual studio 2013 with ODBC Connection type and deploy report onto share point 2013. How to create report, data source and deploy on share point.
My problem is how we will create ODBC connection with AS/400 and connect report with AS/400.
I was wondering if it is possible to use a generic list object to use as the datasource/data for a report? Right now we use these business objects to display information on our website and would be great it we could re-use those objects and create reports based on them. We are doing some calculations etc in the business layer to build these objects, so if we could re-use, that would be best. Thanks!
I have a datasource view DSV1. It points to a datasource DS1 that is considered the "primary".
I have created a Report Model that uses DSV1 (and thus uses DS1)
I created a new datasource, DS2 that I would like to use instead of DS1. (I can't just modify DS1 because if I modify it, it will overwrite it when we go to our Production environment and break that datasource)
So, I can go into DSV1 and change all the references from DS1 to DS2.
But that's where the problem lies.
When I try to build, I get the following error:
"The Table property of the Entity "E1" refers to the Table "dbo_View", which is not in the primary data source."
Somehow, the entity is tied to the "primary" datasource. When I change it back to DS1, everything works fine. Any thoughts? What can I do?
