Using A Complex Type As Parameter To A Webservice
Mar 28, 2007I really need some information that shows how I could construct a query that take a complex type as parameter.
Regards, Christian
ADVERTISEMENT
Data From Wcf-webservice / Object Parameter
Oct 1, 2007hi,
i have a wcf webservice method with a "GetPropertyDetailsRequest" object as parameter.
GetPropertyDetailsRequest Object:
<GetPropertyDetailsRequest xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="WZ.Services.Sso.20070423">
<MessageId xmlns="WZ.Services.200709.1">00000000-0000-0000-0000-000000000000</MessageId>
<ApplicationGuid>04030201-0605-0807-090a-0b0c0d0e0f10</ApplicationGuid>
<ApplicationSoapKey>04030201-0605-0807-090a-0b0c0d0e0f10</ApplicationSoapKey>
<UserGuid i:nil="true" />
<ActiveDate>2007-09-12T12:33:47.793157+02:00</ActiveDate>
<DetailLevels>NoDependencies</DetailLevels>
<IDs>
<GlobalKey>
<IDs xmlns4p1="http://schemas.microsoft.com/2003/10/Serialization/Arrays">
<d4p1:anyType xmlns5p1="http://www.w3.org/2001/XMLSchema" i:type="d5p1:int">9</d4p1:anyType>
</IDs>
<KeyType>Subscription</KeyType>
</GlobalKey>
<GlobalKey>
<IDs xmlns4p1="http://schemas.microsoft.com/2003/10/Serialization/Arrays">
<d4p1:anyType xmlns5p1="http://www.w3.org/2001/XMLSchema" i:type="d5p1:int">90</d4p1:anyType>
</IDs>
<KeyType>Subscription</KeyType>
</GlobalKey>
<GlobalKey>
<IDs xmlns4p1="http://schemas.microsoft.com/2003/10/Serialization/Arrays">
<d4p1:anyType xmlns5p1="http://www.w3.org/2001/XMLSchema" i:type="d5p1:int">900</d4p1:anyType>
</IDs>
<KeyType>Subscription</KeyType>
</GlobalKey>
</IDs>
<PropertyCodes xmlns2p1="http://schemas.microsoft.com/2003/10/Serialization/Arrays">
<d2p1tring>PropertyCodeFilter1</d2p1tring>
<d2p1tring>PropertyCodeFilter2</d2p1tring>
<d2p1tring>PropertyCodeFilter3</d2p1tring>
</PropertyCodes>
<Unique>true</Unique>
<requestedApplicationGuid i:nil="true" />
</GetPropertyDetailsRequest>
is it possible to include the GetPropertyDetailsRequest object as parameter for the XML Datasource in Reporting Services? i have try it so
<Query>
<SoapAction>http://tempuri.org/GetData</SoapAction>
<Method Namespace="http://tempuri.org/" Name="GetData">
<Parameters>
<Parameter name="request" type="GetPropertyDetailsRequest">
<!-- ..... -->
<!--GetPropertyDetailsRequest -->
<!-- ..... -->
</Parameter>
</Parameters>
<Query>
but i get an error, that the webservice method (GetDetails(GetPropertyDetailsRequest request) ) needs an object as parameter .
can you help me?
WebServices: This Complex Type Does Not Contain Any Properties
Aug 9, 2007Hello everyone,
I am newbie in SSIS and I have one problem.
I have defined in Control Flow one WebService Task, specified the WSDL-File.
I have chosen one method from WS as Input. But this method requires one parameter of the ArrayOf_xsd_string type.
If I try to choose it, I receive following error:
===================================
This complex type does not contain any properties. (Microsoft.SqlServer.WebServiceTaskUI)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.CustomGridControl.HandleEllipseBtn(Int64 row, Int32 col)
in my WSDL-File it already defined:
Code Snippet<complexType name="ArrayOf_xsd_string"><complexContent><restriction base="soapenc:Array"><attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:string[]"/>
Could you help me? Where I can define this ArrayOf_xsd_string type, or how can I correct my problem?
Thanks a lot for your Help!
Regards,
SSIS Web Service Complex Type Inputs
May 21, 2007Hi,
I am trying to make a call to a third-party web service in my SSIS package. The request has custom complex data type as the parameter. As has been pointed out in this forum before, the Web Service Task only lets you assign the outside parameter from a variable, not the internal parameters needed to create the complex data type.
To be more specific, the web service input wants a 'ContactSearchRequest' parameter. I can assign this from a variable. If I click on the 'value' field under the 'Input' section for the web service task, it shows me that the 'ContactSearchRequest' data type is made up of the following:
contactId - long
numResults - int
offset - int
passKey - string
searchParam - string
sortType - int
Unfortunately, I can't assign these internal parameters from a variable, at least not through the web service task interface.
My next thought was to create a variable of type 'object' and then set it in a script task prior to calling the web service task. However, I'm not sure exactly how to do this. How will my script know about the class definition of 'ContactSearchRequest'? Do I just create a class called 'ContactSearchRequest'?
I've used this same web service in a .NET C# project and after I imported the web service, visual studio knew all about the custom data types. How do I do something similar in SSIS?
Of course, the easiest solution would for Integration Service to allow me to set those internal parameters via variables, but we're apparently not there yet.
Any suggestions?
Thanks,
Trey
How To Declare A Procedure Parameter Type To Match A Referenced Table Colum Type
Dec 14, 2007I like to define my procedure parameter type to match a referenced table colum type,
similar to PL/SQL "table.column%type" notation.
That way, when the table column is changes, I would not have to change my stored proc.
Any suggestion?
Ambiguous Complex Type Definition With XML Source. Workaround?
Jan 19, 2006Hi,
This could well be down to my _limited_ knowledge of XSD.
I have a document and SXD supplied by 3rd party.
Both documents are valid, according to XMLSpy.
When I give the document and xsd to SSIS XML Source it complains about ambiguous complex types.
In the XML doc there is an element called Allowance that has child elements.
There is also a group which references many other elements including Allowance.
When I remove the group, SSIS stops complaining about allowance.
Would the problem stem from SSIS creating an output called Allowance ('cause of it's children), getting to the group and again, 'cause allowance has children, try create another output called Allowance.
Is my understanding of this correct? Is there a work around for a situation like this?
The only thing I can come up with is deleting the group....
Possible to alias an element? Could alias the Group > Allowance g_Allowance.
Cheers,
Crispin
Consuming WCF Service With Complex Data Type In SSIS
Oct 9, 2007
Hi,
Need a guidance on consuming the WCF service with complex type in the SSIS package.
I have a WCF service with complex type inside the complex type (Nested complex type) in the web method as an argument. When I try to use this WCF service in the SSIS web service task, I get an error "The web method has unsupported arguments".
I am able to consume the WCF service with the web method having Complex type and simple/prmitive type in side that as argument.
For example:
The web method in WCF service which accepts the argument as comlex type say "Employee" whose structure is:
Employee
{
FName String;
LName String;
Age int
}
It is possible to consume this WCF service and pass the arguments.
But when the Employee complex type is changed to have one more complex type in side it it give the above mentioned error. The Employee type is modified as:
Employee
{
FName String;
LName String;
Age String
Type EmployeeType;
}
EmployeeType
{
type string;
}
Now I get the error Web Method has unsupported arguments.
Can this be done in SSIS?
Virendra
Integration Services :: Passing Complex Type As A Variable In Web Service Task
Oct 5, 2011When you pass a complex type (the one represented by class) to a web service the BIDS UI allows you to enter values for every field of that type as constants. But what if you want to pass a variable? Once again the UI allows you to specify a variable for that complex type parameter. But how to make this variable in SSIS?I understand it should have the type of Object. But how to specify what the runtime type of this object is? And how to assign all fields to that object?
View 6 Replies View RelatedSoapException While Rendering Report Through WebService - Error During Processing Of ‘ReportParameterTime’ Report Parameter
May 5, 2008I am extracting RS reports through a WebService:
report = execService.Render("EXCEL", null, out extension, out mimeType, out encoding, out warnings, out streamIds);
Some works fine but some are generating the following SoapException:
Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter.
I set required parameters to their default values. In this specific report I have two required parameters:
1: ReportParameterTime, String
2: ReportParameter1, String
I set them to their default values (ReportParameterTime to "[Czas].[Kalendarzowy].[Rok].&[2007]" - means
Time Calendar Year 2007) but I am getting the exception above. I set parameters using this code:
execService.SetExecutionParameters(parameterValues.ToArray(), CultureInfo.CurrentCulture.Name);
Where parameterValues is a List<ReportExecution2005.ParameterValue>.
When I am using Microsoft.Reporting.WinForms.ReportViewer the report is generated without
any problems. I can see one parameter to choose: "Kalendarzowy" (means adj. Calendar) and can
select years, the default value is "2007".
What am I doing wrong and how can I fix this error ? Does anybody know ?
Regards,
Daniel
Unable To Cast Object Of Type 'System.String' To Type 'System.Web.UI.WebControls.Parameter'.
Jun 19, 2008I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
Complex DB Search Forms (Store Proc Vs. Complex Where)
Nov 12, 2003I have web forms with about 10-15 optional search parameters (fields) for a give table. Each item (textbox) in the form is treated as an AND condition.
Right now I build complex WHERE clauses based on wheather data is present in a textbox and AND each one in the clause. Also, if a particular field is "match any word", i get a ANDed set of OR's. As you can imagine, the WHERE clause gets quite large.
I build clauses like this (i.e., 4 fields shown):
SELECT * from tableName WHERE (aaa like '%data') AND (bbb = 'data') AND (ccc like 'data%') AND ( (xxx like '%data') OR (yyy like '%data%') )
My question is, are stored procedures better for building such dynamic SQL clauses? I may have one field or all fifteen. I've written generic code for building the clauses, but I don't know much about stored procedures and am wondering if I'm making this more difficult on myself.
How To Get The Parameter Type In VB.net?
May 24, 2007I am currently using the following embedded code to get the selected values from a Parameter and display in a textbox. I however have a number of reports and I don't want to include this in all of them. I have created a dll with some other functions but when i try to include the following function it throws an error on the Parameter type. What am I doing wrong, I am not all that familiar with dot net?
Public Function ShowParameterValues(ByVal parameter as Parameter) as String
Dim s as String
If parameter.count <= 5 then
If parameter.IsMultiValue and parameter.count > 1 then
s = " "
For i as integer = 0 to parameter.Count-1
if i = parameter.count - 1
s = s + CStr(parameter.Label(i))
else
s = s + CStr(parameter.Label(i)) + ", "
end if
Next
Else
s = " " + CStr(parameter.Label(0))
End If
else
s = " Only a maximum of 5 selection values can be displayed. "
End if
Return s
End Function
SqlDataSource Using A Type Parameter Of Table
Oct 8, 2006I am not sure (and I've been known to overlook things) if it is possible to use a Table parameter type as parameter to a stored procedure? Is it possible? I would prefer not to create a SQL batch statement calling an stored proc w/ one parameter over and over. Instead i'd rather just create the stored proc to take a table parameter and pass the table into the stored proc. I know I could use a CSV string of IDs instead of a table... or I could create a big SQL batch and use that. But I'd rather not. Could anyone provide some guidance? Thanks!Joe
View 2 Replies View RelatedTable Data Type As Parameter
Aug 24, 2007How can I use Table Data Type as parameter for Stored Procedures and Functions.
View 1 Replies View RelatedBit Type Parameter For Stored Procedure
Apr 19, 2004I am trying to supply a bit type parameter to a stored procedure. This is used to update a Bit type field in a table. The field is called PDI
The syntax I am trying to use is:
MyStoredProcedure.Parameters.Add(New SqlParameter("@Pdi",SqlDbtype.bit))
MyStoredProcedure.Parameters("@pdi").value = -1
When I do my ExecuteNonQuery I get error 8114
What am I doing wrong?
Function With A Parameter Of Type Object.
Jun 10, 2008Hello,
I would like to create a function that accepts a value of any type as parameter. I mean, it could receive a value of type int, datetime, char,...
In .net, I would use the type "object". Is there an equivalent for SQL server function ?
Regards,
mathmax
Multi Select Type-in Parameter
Nov 22, 2006Hi All
Can anyone tell me whether or not it is
possible to multi select when you have a parameter
that is set as non-querried in order for it to be
typed instead of selected.
My users prefer typing the values and selecting
more than one. But at the moment I cant give them both..
I'm using SSRS with SSAS cube all in BI all 2005
Please help. I suspect that if it's possible it may just be a
syntax thing but I am yet to find it.
Thanks in advance
Gerhard Davids
Stored Procedure Parameter Without Type
May 23, 2006Hi All !
How i can create a stored procedure like ISNULL ?
I need to a procedure that accepts Int type parameters and Float type ect.
Thanks. DBT.
Use Of Variant Type Parameter In ExecuteNonQuery()
Jul 19, 2007
In the following code snippet, the stored procedure executes up to the
iRet = vciSqlCommand.ExecuteNonQuery();
command and fails with error:
System.Data.SqlClient.SqlException: Incorrect syntax near 'value'.
That would point to the
" = @data_Param where
section.
So what is the proper syntax?
Code Snippet
SqlParameter data_Param = new SqlParameter("@data_Param", SqlDbType.Variant);
SqlCommand vciSqlCommand = new SqlCommand();
switch ((vcidatatype)FieldDef.ivcidatatype)
{ // read in the binary data!!!!!!
case vcidatatype.eENGUNITS: data_Param.Value = Encoding.ASCII.GetString(r.ReadBytes(FieldDef.iLen)); break;
case vcidatatype.eLANADR: data_Param.Value = r.ReadInt16(); break;
case vcidatatype.eBYTESIZE: data_Param.Value = r.ReadByte(); break;
case vcidatatype.eFLOATSIZE: data_Param.Value = r.ReadSingle(); break;
case vcidatatype.eINT32SIZE: data_Param.Value = r.ReadUInt32(); break;
case vcidatatype.eFILLERBYTES: r.ReadBytes(FieldDef.iLen); break; // eat up empty bytes
default: FieldDef.ivcidatatype = (Int32)vcidatatype.eFILLERBYTES; break;
}
if (FieldDef.ivcidatatype != (Int32)vcidatatype.eFILLERBYTES)
{ // all but filler
vciSqlCommand.CommandText =
"update " + acPointType + "set " + FieldDef.sFldName +
" = @data_Param where VEC = " + acVECName +
" and name = " + acPointName;
vciSqlCommand.Connection = conn;
conn.Open();
iRet = vciSqlCommand.ExecuteNonQuery();
conn.Close();
Pop-Up Calendar For DateTime Parameter Type
Aug 29, 2007
Hello,
We have noticed that the calendar months in the Pop-Up Calendar option, based upon month word length, will shift in size and this will cause the left and right arrows to shift. For example, 'May' is much shorter than 'December'.
My user is complaining because she cannot quickly move from one month to another without having to reposition the mouse over the navigation arrow.
Is the Calendar feature working as designed?
Thank you,
Is It Possible To Capture An OUT Type Parameter From A PL/SQL Stored Procedure?
Dec 19, 2007When a stored PL/SQL procedure in my Oracle database is called from ASP.NET, is it possible to retrieve the OUT parameter from the PL/SQL procedure? For example, if I have a simple procedure as below to insert a row into the database. Ideally I would like it to return back the parameter named NewId to my ASP.NET server. I'd like to capture this in the VB.NET code. 1 create or replace procedure WriteName(FirstName in varchar2, LastName in varchar2, NewId out pls_integer) is2 3 NameId pls_integer;4 5 begin6 7 select name_seq.nextval into NameId from dual;8 9 insert into all_names(id, first_name, last_name)10 values(NameId, FirstName, LastName);11 12 NewId := NameId;13 14 end WriteName; 1 <asp:SqlDataSource 2 ID="SqlDataSaveName" 3 runat="server" 4 ConnectionString="<%$ ConnectionStrings:ConnectionString %>"5 ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>" 6 SelectCommand="WRITENAME"7 SelectCommandType="StoredProcedure">8 <SelectParameters>9 <asp:ControlParameter ControlID="TextBoxFirstName" Name="FIRSTNAME" PropertyName="Text" Type="String" />10 <asp:ControlParameter ControlID="TextBoxLastName" Name="LASTNAME" PropertyName="text" Type="String" />11 </SelectParameters>12 </asp:SqlDataSource>This is then called in the VB.NET code as below. It is in this section that I would like to capture the PL/SQL OUT parameter NewId returned from Oracle. 1 SqlDataSaveName.Select(DataSourceSelectArguments.Empty) If anybody can help me with the code I need to add to the VB.NET section to capture and then use the returned OUT parameter then I'd be very grateful.
View 2 Replies View RelatedEnable Parameter Of Type Date To Be Blank.
Feb 11, 2008Is it possible to enable parameter of type date to be blank (not null)?
I created parameter of type date, gave it no default value, when I pressed the preview tab I got error message "The property 'DefaultValue' of report parameter 'DateParamName' doesn't have the expected type"
Thanks in advance!
OLEDB Command Parameter Type Is Different In Different Situations
Dec 3, 2007
Hi All,
I am using OLEDB Command transformation in a data flow to update the table. Find the columns for the table EMP as follows.
EmpID - int
EmpName - varchar(40)
EmpSal - float
Status - varchar(20)
I am using the following command to update the table.
Update EMP set status = 'Disabled' where EmpID = ? and EmpSal = ?
when I use the above condition the type of the second parameter is taking as "double precision float" as the incoming input column type is "double - precision float". This is fine.
But when I use the following condition the type of the param is taking as different one.
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = 0
It is taking as "four byte signed integer" even though the incoming input column type is "double precision float" thus I am loosing the precision and getting error when the limit exeeds. If I use 0.0 then it is taking as "Numeric" type.
If I use convert function like (EmpSal + ? ) = Convert(float, 0) then it is taking as "double precision float".
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = Convert(float, 0)
My question is how it behaves in the above situation. Can any body clarify please?
Venkat.
Argument Data Type For Dateadd Parameter
Mar 24, 2008
I am using the following code in my SQL stmt in my OLE BD Source stmt:
WHERE ICINVENTORY.ICINVLastChgAt > ? AND ICINVENTORY.ICINVLastChgAt <= DATEADD(mi,?,?)
My parameters are as follows:
0 - User:LastSalesLoadDate DateTime variable
1 - User:Load Interval Int16 (or Int32)
2 - User:LastSalesLoadDate
When I try to close the program I get the following error:
"Argument data type datetime is invalid for argument 2 of dateadd function. If I can't use a datetime data type for the date time part of the dateadd, what can I use?
The exact same code runs without error in an EXECUTE SQL task.
Thanks.
Niewbie: Accept The Input Parameter Of Astring Type
Sep 6, 2004Very simple problem but I still can not sovle, could you help me?
I have a following store procedure:
create procedure countauthors @state as
declare @countauthors int
select @countauthors=count(*) from authors
where state=@state
return @countauthors
declare @result int
exec @result=countauthors'ca'
But it don't work for me. Is something wrong here?
many thanks
:)
Data Type Of Parameter Passing To A Stored Procedure
Feb 25, 2004Hi,
I pass a paramter of text data type in sql server (which crosspnds Memo data type n Access) to a stored procedure but the problem is that I do not know the crossponding DataTypeEnum to Text data type in SQL Server.
The exact error message that occurs is:
ADODB.Parameters (0x800A0E7C)
Parameter object is improperly defined. Inconsistent or incomplete information was provided.
The error occurs in the following code line:
.parameters.Append cmd.CreateParameter ("@EMedical", advarwchar, adParamInput)
I need to know what to write instead of advarwchar?
Thanks in advance
Execute SQL Task With An INPUT Parameter Of Type DBTIMESTAMP
Dec 18, 2007Hi Everyone,
I'm trying to do something that should be fairly straightforward, but SSIS seems to be getting confused. I have a stored procedure which takes a timestamp as an input parameter. (NOTE: It's not a DateTime that's being stored as a DBTIMESTAMP, it really is a timestamp in the SQL sense.)
The command should be something like this:
Code Block
EXEC dbo.UpdateSynchTimestamp ?
I tried to use my variable to pass the value through Parameter Mapping, but I got an unusual error:
[Execute SQL Task] Error: Executing the query "EXEC dbo.UpdateSynchTimestamp ?" failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_DBTIMESTAMP)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This is strange for a number of reasons:
1) The DBTIMESTAMP parameter has the Direction set to "Input", so it should not be interpreted as an Output or ReturnValue.
2) The Execute SQL Task has Result Set = "None", so it should not be trying to return anything.
If I change the code to include a value hard-coded it works:
Code Block
EXEC dbo.UpdateSynchTimestamp 0x00000000000013BD
It is only when a variable is involved that it breaks.
Finally, here's the Stored Procedure itself:
Code Block
CREATE PROCEDURE [dbo].[UpdateSynchTimestamp]
@NewValue TIMESTAMP
AS
BEGIN
SET NOCOUNT ON;
UPDATE ServerSettings
SET [Value] = @NewValue
WHERE [Key] = 'SynchTimestamp'
END
Doe anyone have any suggestions as to why this isn't working for me? For the time being, I have a Script Task which constructs the command text and stores it in a variable. I can't even use an Expression because the DBTIMESTAMP is not supported.
Thanks for reading this!
Data Type In Parameter Mapping For An Execute SQL Task
Jul 12, 2006Hi, I am trying to use an integer as input parameter for my task I get suck on the parameter data type.
The input parameter is define as @Control_ID variable as Int32 in SSIS. When I got into the parameter mapping of Execute SQL Task, I don't find the Int32 data type. I used to try Short, Numeric, Decimal and so on, but all of those data type didn't work. and it returns the following error message:
SSIS package "DCLoading.dtsx" starting.
Error: 0xC002F210 at Update Control_ID, Execute SQL Task: Executing the query "use DCAStaging
update DCA_HFStaging set
[dbo].[Control_ID] = P0 where [Control_ID] is null
" failed with the following error: "The multi-part identifier "dbo.Control_ID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Update Control_ID
Warning: 0x80019002 at DCLoading: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DCLoading.dtsx" finished: Failure.
Any help?
Execute Sql Task To Set Output Parameter Of Type Integer
Jun 1, 2006I'm having a heckuva time with creating output parameters based on a query.
Here's what I'm doing. Every day, we copy rows from our mysql table to our sql server table. We only want to copy those rows that are new, so as to not have to recopy the entire table.
So I have a DataReader Source set to Ado.net/odbc provider that connects to the mysql db.
The destination is an OLE connection to the local sql server.
I create an Execute SQL Task.
The connection is set to the OLE connection
The type is direct input
The SQL Statement is "select max(id) from copy_table"
In Parameter Mapping, I create a user variable called maxId that is an int64. That variable is now used as the Variable Name. The Direction is Output. The Parameter Name is 0.
Whatever data type I use for the mapping does not work with the variable type. If the parameter was set to ULARGE_INTEGER, here's the error
[Execute SQL Task] Error: Executing the query "SELECT MAX(stats_id) AS max_id FROM copy_table" failed with the following error: "Type name is invalid.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If parameter is set to LONG:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "maxId": "The type of the value being assigned to variable "User::maxId" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I found that if variable and parameter were dates to use datetime for the variable and DBTIMESTAMP for the parameter.
There are an awful lot of combinations between all the possible variable types, and the possible parameter types. Does anyone know the secret combination for your typical integer?
Thanks,
Lori
String Type Multi-Valued Parameter Issue
Jul 3, 2007Hi There.
I have a Multi-valued parameter that is a string type and it freaks out when a do a select all from my drop down list. I suspect it has something to do with size as it works great if a pick a reasonable amount of items. My parameter list is populated by 1463 items of 12 characters each. Is there a threshold I should have to worry about?
Thanks, Mike
Date Type Parameter: OLEDB Driver Problem
Sep 13, 2007Hi Friends,
Inititally we were using ODBC driver for DB2. My reports we working fine(preview mode) with date type parameters.
But When I changed it to OLEDB driver for AS400 DB2 it is throwing the exception while previewing the same report.
Driver Name: "IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider"
ERROR Message: "The parameter fromDate doesnot have expected value?"
Please help me.
Thanks in advance
Novin
Column, Parameter, Or Variable #1: Cannot Find Data Type SqlDatareader
Sep 28, 2006Hello Everyone,A have a Managed Stored Procedure ([Microsoft.SqlServer.SqlProcedure]). In it I would like to call a UserDefinedFunction:public static SqlInt32 IsGetSqlInt32Null(SqlDataReader dr, Int32 index) { if(dr.GetSqlValue(index) == null) return SqlInt32.Null; else return dr.GetSqlInt32(index) }I than allways get the following ErrorMessage:Column, parameter, or variable #1: Cannot find data type SqlDatareader.Is it not possibel to pass the SqlDatareader to a SqlFunction, do the reading there and return the result.My original Problem is, that datareader.GetSqlInt32(3) throws an error in case there is Null in the DB. I thought SqlInt32 would allow Null.Would appreciate any kind of help! Thanks
View 1 Replies View RelatedOutput Parameter With Text Data Type In Stored Procedure
Jul 20, 2005How can I make a stored procedure which has a output parameter withtext data type? My procedure is:CREATE PROCEDURE try@outPrm text OutputASselect @outPrm =(select field1 from databaseName Wherefield2='12345')GOHere field1 is text data type.Thanks
View 1 Replies View Related