Using A Variable In A GROUP BY Statement
Sep 2, 2007
Hi Experts, I would like to make a stored procedure in my db: I have sql express 2005.
I get Error 164 when creating this procedure:
CREATE PROCEDURE CrossTable
@Variable1 smallint,
@Variable2 smallint,
@Value smallint
AS
BEGIN
SELECT @Variable1, COUNT(@Variable1) AS 'Haufigkeiten'
FROM SurveyData
WHERE @Variable2 = @Value
GROUP BY @Variable1
END
GO
I would like to generate a frequency chart per userdefined-variable (@variable) with a where restriction.
The GROUP BY @Variable1 seems to be problem: is there some workaround in order to use variables in a GROUP BY clause? or how can I write an sql statement which do the same as this procedure (CrossTable) without using the GROUP BY clause?
Thanks a lot for your replies
Greets from Switzerland
Chris
View 3 Replies
ADVERTISEMENT
Oct 4, 2006
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
View 2 Replies
View Related
Jun 29, 2006
Hi Champs!
How can i create a table on an filegroup that comes from a variable?
Using EXECUTE??
the following does not work:
declare @var char
set var = 'filegroup'
Create table table]
...
...
ON [@var]
/Many thanks
View 1 Replies
View Related
Oct 28, 2015
I have done Column Level Group By on FY Column.Here i would like to get Fy 16 Prior Year Remaining amount from this formula (FY 15 Prior Amount + FY 15 Capital - FY 15 Expenditure). If I calculate as group variable its applicable only to that FY as I cant get from previous year FY.
View 6 Replies
View Related
Oct 17, 2007
hi everyone,
I have a little problem concerning a SQL statement I need to do.
here is my statement:
SELECT Location, [Week of Availability], GSDC_Name, PA_Name, CA_Name, MAX([Year of Availability]) AS [Year]
FROM dbo.tbl_availability
GROUP BY Location, GSDC_Name, PA_Name, CA_Name, [Week of Availability]
now the problem in this statement is that I don't want to group by Week of Availability, but I do want to select it. BUT, if I remove Week of availability from the Group by part, I get an error! how can I do this?
View 6 Replies
View Related
Mar 23, 2006
A client wants to keep track of the number of searches for keywords ina date range. So, I'm storing each occurance of a search in a table.The columns are:PK: idsearch_stringsearch_dateI'm trying to wrap my head around how I would select the number ofoccurances for each string, divided by days. The desired result wouldlook something like:search_date search_string numOccurances----------------------------------------------------------March 20 dogs 4March 20 pigs 2March 21 dogs 8March 22 pigs 3March 22 pigeons 5I've tried a query like:selectsearch_string, CONVERT(CHAR(11),search_date,106) as search_date,count(search_string) as numOccurancesfrom searcheswhere search_date >= dateadd(d,-3,getdate())group by search_date, search_stringbut it doesn't give me the desired results. I'm sure I'm just lookingat it the wrong way.Suggestions?Thanks!
View 2 Replies
View Related
Jul 20, 2005
I need this to work:SELECT [ID] FROM [test] WITH (NOLOCK) where [a/c/d]='a' GROUP BY [unit#],[EFF DATE] HAVING COUNT ([unit #]) > 1The problem is that I get an error that [ID] needs to be in the GROUPBY clause or aggregate function. if I put it in there, I will get noduplicates (because it is the identity field). The whole point ofthis is to find dups.Thanks for any help.Robby
View 3 Replies
View Related
May 19, 2008
I am working on some sql for a report and i am getting an error with the group by statement.
SELECT Member.memberNo, Member.FamilyName, Member.GivenName, Member.gender, Membership.FeesPaid, (Membership.Fees - Membership.FeesPaid) AS OutstandingFees FROM Membership
INNER JOIN Member ON Member.memberNo = Membership.memberNo
GROUP BY Member.registrationNumber;
This fails because of the GROUP BY.
Does anyone know why this is the case?
This is the error that is produced:
SELECT DISTINCT Member.memberNo, Member.FamilyName, Member.GivenName, Member.gender, Membership.FeesPaid FROM Membership
*
ERROR at line 1:
not a GROUP BY expression
If someone could help this would be greatly appreciated.
cheers,
View 3 Replies
View Related
Jan 24, 2008
Hello everyone,
I'm trying to practice some SQL statements from my Web Data Administrator. Until now everything has worked fine. However, when I write the following statement:
SELECT DATEPART(m, Date) + '/' + DATEPART(yyyy, Date) AS Month, COUNT(*) AS NumberOfEvents FROM CompanyEvents GROUP BY DATEPART(m, Date) + '/' + DATEPART(yyyy, Date)
I get the following error " Server: Msg 245, Level 16, State 1, Line 1Conversion failed when converting the varchar value '/' to data type int."
Do I have to change something on the database?
Now, I tried to google the msg 245 and I cannot get any clear answers on the topic.
I would greatly appreciate if someone could give me some guidance on this problem.
Thanks,
Eduardo
View 2 Replies
View Related
May 21, 2008
I have the following SQL Statement:
SELECT CONVERT(char(10), FixtureDate, 101) AS Date, COUNT(*) AS 'NumberOfRecords'FROM tblFixturesGROUP BY CONVERT(char(10), FixtureDate, 101)
I want to add a new column called "need results".
This column needs to be count if a certain cell is NULL.
Count If HomeScore IS NULL
as well as grouping by date and counting the number of records. So the third column needs to count the number of records where homescore IS NULL
View 1 Replies
View Related
Apr 12, 2004
Hi,
I currently have a table whose DDL is as follows:
CREATE TABLE [tblSales] (
[OrderID] [int]
[SaleDate] [smalldatetime] ,
[ProductCode] [nvarchar] (255) ,
[QtySold] [float] ,
[UnitPrice] [float] ,
[Discount] [float] ,
[GrossSaleAmount] NULL ,
[NetSaleAmount] [float]
)
The GrossSaleAmount and NetSaleAmount are calculated fields. But for this post, kindly ignore why I am storing calcuated fields...
QUESTION:
What I want to do is to populate another table (the DDL of which is give below) from tblSales in such a manner that the TOTAL sales from each product for each available
date is grouped/summed together.
CREATE TABLE [tbl_Product_Grouped_Sales] (
[SaleDate] [smalldatetime] ,
[ProductCode] [nvarchar] (255) ,
[TotalQtySold] [float] ,
[NetSaleAmt] [float]
)
Thanks in advance for your help.
View 1 Replies
View Related
Oct 26, 2012
I want to run a much larget SQL statement, but for examples sake this is a good starting point
Code:
Select efName, elName, eAddress, SUM(Convert(money, bonus1)+Convert(money, bonus2)+Convert(money, bonus3)) As TotalBonus, ePay FROM tableEInfo
It is telling me that I have to use Group By, but the problem is that most of my fields are text fields, which it looks like have to be converted in order to use with a group by statement. Is it possible to use the sum function with no group by statement?
View 13 Replies
View Related
Apr 8, 2014
I recently had an interview and the interviewer has asked me to use a group by clause in an update statement. Here is the table and data:
Table name: Customer
cust Size Geo Segment
BP LG EU
Accenture LG US
MSC MED US
SclumbergerLG US
So the request is to update the Segment column with a unique number starting with number 1.
So for BP it should be 1, Accenture it should be 2, MSC it should be 3, Sclumberger should be 1 since the size and geo are not unique. He asked me to use a group by size and geo to generate a unique number for each combination and than make the update.
View 2 Replies
View Related
May 13, 2007
Hi guys,
I am having a little diffulty displaying two columns next to each other in a case/group by statement as code shown below.
I was wondering if i could have the results displayed such that the gst_amount and total_amount are in two separate columns (as they currently are) however the results of the rows are in the same row not in separate rows (as they are currently). I dont think i can do this in the current case statement that i have (i.e: the two case statements).
Any feedback would be appreciated
SELECT distinct
PERIOD.STARTDATE,
temp_111.EVENTTYPEID,
case when temp_111.[name] like '%GST%'
then sum(temp_111.CONTRIBUTIONVALUE)
end as GST_AMOUNT,
case when temp_111.[name] not like '%GST%'
then sum(temp_111.CONTRIBUTIONVALUE)
end as Total_Amount
FROM temp_111 INNER JOIN PERIOD
ON temp_111.PERIODSEQ = PERIOD.PERIODSEQ
WHERE
(NOT temp_111.PRODUCTID = 'IIIE' OR temp_111.PRODUCTID IS NULL)
AND temp_111.PERIODSEQ in ('111')
group by PERIOD.STARTDATE,
temp_111.EVENTTYPEID,
temp_111.[name]
Here is the current result displayed:
Startdate eventtypeid gst_amount Total_amount
2006-11-01 00:00:00.000NelNULL 83470.5608000000
2006-11-01 00:00:00.000NelNULL 161408.5264874810
2006-11-01 00:00:00.000NelNULL 677568.2683000000
2006-11-01 00:00:00.000NelNULL 2645478.1215092400
2006-11-01 00:00:00.000Nel8347.0560800000 NULL
2006-11-01 00:00:00.000Nel16140.8526488160NULL
2006-11-01 00:00:00.000Nel67756.8268300000NULL
2006-11-01 00:00:00.000Nel264547.8121507070NULL
Instead I want the result to show something like this:
Startdate eventtypeid gst_amount Total_amount
2006-11-01 00:00:00.000Nel8347.0560800000 83470.5608000000
2006-11-01 00:00:00.000Nel16140.8526488160 161408.5264874810
2006-11-01 00:00:00.000Nel67756.8268300000 677568.2683000000
2006-11-01 00:00:00.000Nel264547.8121507070 2645478.1215092400
View 2 Replies
View Related
Mar 23, 2007
Hi,I am bloody amateure and I was wondering if someone could help me editthe statement below so it groups the field SCDMASTER.SCTY_CLASS_CODEand creates one field called "total balance" equallingCUSTODY_BALANCE.OPENING_BALANCE + CUSTODY_BALANCE.DEPOSIT_AMOUNT -CUSTODY_BALANCE.WITHDRAWAL_AMOUNTSELECTCUSTODY_BALANCE.APPLICATIONCYCLEDATE,CUSTODY_BALANCE.ASSET_ID,SCDMASTER.SCTY_CLASS_CODE,CUSTODY_BALANCE.OPENING_BALANCE,CUSTODY_BALANCE.DEPOSIT_AMOUNT,CUSTODY_BALANCE.WITHDRAWAL_AMOUNTFROMFPMCAPSHIST.CUSTODY_BALANCE CUSTODY_BALANCE,CAPSREPORT.SCDMASTER SCDMASTERWHERECUSTODY_BALANCE.ASSET_ID = SCDMASTER.CUSIP_ID AND((CUSTODY_BALANCE.APPLICATIONCYCLEDATE={ts '2007-03-21 00:00:00'}) AND(SCDMASTER.SCTY_CLASS_CODE Not In('BILL','NOTE','BOND','CD','BD','CB','TINT','TPRN' ,'CA','YD')))Thanks,Andreas
View 3 Replies
View Related
Mar 20, 2007
Hi,
I am having trouble getting my query right. i am using a stored procedure to retrieve this data and bind it to my grid view.
Problem: I can't associate a field with a column that i am returning with my record set.
Details: I have query that i want to return 9 columns (UserName, Pre-Approved, Processing, Underwriting, Conditioned, Approved, Docs Out, Docs Back, Conditions Met). The username column lists all loan agents. I want the other 8 columns to list the name of the borrower (crestline..borrower.lastname) that is associate with that loan agent and that loan state. Each time a record is found where there is a valid loan agent (UserName) that meets the 'where' conditions, there will be a borrower. the 'LoanKey' field is a primary key that lets me get the borrower name from the borrower table. I dont know how to construct my query such that those borrower names get associated with their respective column header.
if the query works, my Gridview should look like this ('Name' refers to the borrower name)
UserName | Pre-Approved | Processing | UnderWriting | Conditioned | Approved | Docs Out | Docs Back | Conditions Met
Bob | | | | Name | | | |
Bob | | Name | | | | | |
Bob | | | | | | | Name |
Steve | | | Name | | | | |
Steve | | | | | | Name | |
Here is my sql call:
SELECT cfcdb..users.username, crestline..borrower.lastname,CASE WHEN crestline..loansp.LoanStatus='Pre-Approved' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Pre-Approved',CASE WHEN crestline..loansp.LoanStatus='Processing' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Processing',CASE WHEN crestline..loansp.LoanStatus='Underwriting' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Underwriting',CASE WHEN crestline..loansp.LoanStatus='Conditioned' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Conditioned',CASE WHEN crestline..loansp.LoanStatus='Approved' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Approved',CASE WHEN crestline..loansp.LoanStatus='Docs Out' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Docs Out',CASE WHEN crestline..loansp.LoanStatus='Docs Back' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Docs Back',CASE WHEN crestline..loansp.LoanStatus='Conditions Met' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Conditions Met'FROM cfcdb..usersinner join (crestline..loansp inner join crestline..borrower on crestline..loansp.loankey = crestline..borrower.loankey)on crestline..loansp.fstnamelo=cfcdb..users.firstname AND crestline..loansp.lstnamelo=cfcdb..users.lastnameinner join cfcdb..users_roleson cfcdb..users.username = cfcdb..users_roles.usernamewhere cfcdb..users.active = 1 AND cfcdb..users_roles.groupid = 'agent'AND crestline..loansp.enloanstat <> 'Closed' AND crestline..loansp.enloanstat <> 'Cancelled' AND crestline..loansp.enloanstat <> 'Declined' AND crestline..loansp.enloanstat <> 'On Hold'order by cfcdb..users.username asc
View 2 Replies
View Related
May 15, 2007
I've got a query where i need to return a max value based on a select but one of the fields i need to return in the results is the records primary key ID No. This messes up the MAX bit and means that all results are returned, not just the max one.
The query i'm using is very long so i've simplified what i mean by the example below. Say i have a table 'Fruits':
ID FruitName Cost1 Apple 0.452 Apple 0.633 Apple 0.524 Pear 0.895 Pear 0.83
And run the query:
select max(Cost),FruitName From Fruitsgroup by FruitName
It'll correctly return:
FruitName CostApple 0.63Pear 0.89
Now i need the ID also returned by my query so i go:
select max(Cost),FruitName,ID From Fruitsgroup by FruitName,ID
This doesnt return the above results with the ID appended to it, it instead returns:
ID FruitName Cost1 Apple 0.452 Apple 0.633 Apple 0.524 Pear 0.895 Pear 0.83
As the ID is always distinct and therefore messes up the grouping. How in this instance would i return the correct result of:
ID FruitName Cost2 Apple 0.634 Pear 0.89
Thanks.
View 9 Replies
View Related
Jul 23, 2006
Hi,
Suppose a table [Inventory]:
Item Color Quantity
-------------------- -------------------- --------------------------
Table Blue 10
Table Red 20
Table Yellow 30
Chair Blue 40
Chair Red 50
I'm wondering if there is a group state like this:
Select Item, ?Function(Color), Sum(Quantity) From Inventory Group by Item
which returns this:
Table Blue,Red,Yellow 60
Chair Blue,Red 90
Does anyone has an idea how this can be achieved?
Regards,
Manolis Perrakis
View 10 Replies
View Related
Jul 20, 2005
I've always been mistified why you can't use a column alias in the group byclause (i.e. you have to re-iterate the entire expression in the group byclause after having already done it once in the select statement). I'mmostly a SQL hobbiest, so it's possible that I am not doing this in the mostefficient manner. Anyone care to comment on this with relation to thefollowing example (is there a way to acheive this without re-stating theentire CASE statement again in the Group By clause?):Select 'Age' =CaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))end,max(SubmittedOn), COUNT(SCRID) AS NbrSCRsFrom SCRViewWHERE(StatusSort < 90) ANDCustomerID = 8 andUserID = 133group byCaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))endOrder by max(submittedon) descThanks,Chad
View 4 Replies
View Related
Sep 25, 2015
i have this schema :
CREATE DATABASE ANDEB
USE ANDEB
CREATE TABLE TDocHeader
(
CustName VARCHAR(50) NOT NULL,
DocNum INT NOT NULL,
col1 varchar(50),
[code]...
How i can have a group by for last docnum for Customer and all columns?
View 6 Replies
View Related
Oct 16, 2006
I am currently straching my head as to why the following doesn't work as I expect.
I have Three tables UsersManagers, Users and Bookings:-
SELECT MAX(UsersManagers.UsernameUser) AS UserID, SUM(Bookings.HoursTotal) AS NumHours
FROM UsersManagers
LEFT OUTER JOIN Users ON Users.Username = UsersManagers.UsernameUser
LEFT OUTER JOIN Bookings ON Bookings.Username = Users.Username
WHERE UsersManagers.UsernameManager = 'testPM1'
AND (Bookings.DateOfBooking BETWEEN '01 October 2006' AND '31 October 2006')
GROUP BY UsersManagers.UsernameUser
This statement returns only one username with the hours they have booked in my Bookings table. However the left outer joins (I would have thought) should return an entry even if there are no hours booked for a user. If I omit the Date Section:
SELECT MAX(UsersManagers.UsernameUser) AS UserID, SUM(Bookings.HoursTotal) AS NumHours
FROM UsersManagers
LEFT OUTER JOIN Users ON Users.Username = UsersManagers.UsernameUser
LEFT OUTER JOIN Bookings ON Bookings.Username = Users.Username
WHERE UsersManagers.UsernameManager = 'testPM1'
GROUP BY UsersManagers.UsernameUser
I get two records returned
testUsr1 37.5
testUsr2 NULL
Why don't I get this when I use a date?
Thanks
View 5 Replies
View Related
Nov 12, 2007
Greetings everyone,
I am trying to use a c# string with an SQL statement in a data adapter (.NET 03)
The code works fine and I have a variable called : string test = ..... that takes the needed values. I just need to implement this string in the sql statement. I tried adding this to my query but I only got an empty row:
WHERE (login = '" & test & "')
WHERE (login = '" + test + "')
any ideas?
PS: If I change to something like WHERE (login = 'abcdef') I get a result meaning there's something wrong with the way I am putting the variable in the sql query.
Again, I am not putting the string in a normal query in my .cs code. this is happening by right clicking the data adapter and configuring the sql statement in the designer window
THANKS!
View 8 Replies
View Related
Dec 14, 2005
Hi,
I've created an sql statement:
select *
from fin_installment
where key_construction = (select ser_construction from fin_construction where key_contract = ' " & variable & " ') order by int_serial
which is in an Dataset's TableAdapter.
This variable receives its value during the form init and it is an integer.
When I start the page the folowing error message is displayed:
" An error has occurred during report processing.
Exception has been thrown by the target of an invocation.
Conversion failed when converting the varchar value ' " & azonosito & " ' to data type int. "
So my question is that how can I use variables in sql statement in dataset?
View 3 Replies
View Related
Dec 13, 2007
Hi, I am trying to use a variable inside a LIKE statement, but it is not working as expected. It will not give a error, but it shows no results while it does show results if I replace the variable with the normal string within the LIKE statement. Here is my code:
Code:
-- this example returns results
SELECT whatever
FROM mytable
WHERE whatever LIKE 'blah%';
Code:
-- this example returns no results
DECLARE @test VARCHAR;
SET @test='blah%';
SELECT whatever
FROM mytable
WHERE whatever LIKE @test;
Any ideas why the version using the variable would not work?
Patrick
View 3 Replies
View Related
Jun 17, 2004
I'm having some trouble modifing a script to save me tons of work. The script if from Microsoft, and it is used as step 3 in a 6 step process to move MS Great Plains users from one server to another. Anyway, the script runs on only 1 company database at a time, and for most Great Plains environments there would only be 1 or 2 company DBs. But I am administering in an ASP environment and we have over 30 company DBs to move. So, I though I would adapt thier script to iterate over each company DB to do the work (rather than creating 30 separate scripts). So I wrapped their loop with my loop to do the iteration. The problem is that T-SQL will not let me use a variable in a USE statement. I've tried to remove the USE statements, but that added a lot of complexity in the internal loop. What is the best way to do this?
Here is the modified code:
/*
** Drop_Users_Company.sql
**
** This script will remove all users from the DYNGRP in the company database
** specified. It will then drop the DYNGRP and readd the DYNGRP to the company.
** It will then add all users back to the DYNGRP based on the SY60100 table.
** NOTE: You will need to replace %Companydb% with the company database
** name.
*/
/* Instead of replacing %Companydb% (in each USE statement) with the name of the
single company database that this script is supposed to work on, I've added
@cCompany to hold the company DB name through each iteration of the outside
cursor/while loop.
*/
declare @cCompany sysname/* ADDED BY ME FOR THE OUTSIDE LOOP */
declare @cStatement varchar(255)/* Misc exec string */
declare @DynDB varchar(15)/* DB Name exec string */
declare @DYNGRPgid int/* Id of DYNGRP group */
/*
** Loop through all company databases, emptying the DYNGRP group.
*/
SET QUOTED_IDENTIFIER OFF
use DYNAMICS
/* Select all of the Great Plains database names from the DB_Upgrade table, where the DB names are conviently stored */
declare C_cursor CURSOR for select db_name from DYNAMICS..DB_Upgrade where db_name not in ('DYNAMICS')
OPEN C_cursor
FETCH NEXT FROM C_cursor INTO @cCompany
WHILE (@@FETCH_STATUS <> -1)
begin
use @cCompany
select @DYNGRPgid = (select gid from sysusers where name = 'DYNGRP')
declare G_cursor CURSOR for select "sp_dropuser [" + name+"]" from sysusers
where gid = @DYNGRPgid and name <> 'DYNGRP'
set nocount on
OPEN G_cursor
FETCH NEXT FROM G_cursor INTO @cStatement
WHILE (@@FETCH_STATUS <> -1)
begin
EXEC (@cStatement)
FETCH NEXT FROM G_cursor INTO @cStatement
end
DEALLOCATE G_cursor
/*
** Do not delete the group to attempt to preserve the permissions already
** granted to it.
*/
use @cCompany
if exists (select gid from sysusers where name = 'DYNGRP')
begin
exec sp_dropgroup DYNGRP
end
/*
** Recreate the DYNGRP group in all company databases.
*/
use @cCompany
if not exists (select name from sysusers where name = 'DYNGRP')
begin
exec ("sp_addgroup DYNGRP")
end
end
DEALLOCATE C_cursor
______________________________________
Thanks for any help you have.
View 1 Replies
View Related
Aug 11, 2006
Declare @MyCode nvarchar(20);
Set @MyCode='ABC'
set @int_rowcount=(SELECT count(hoten) FROM @MyCode)
I run it but still errors !
How can i implement above statement ?
Thank you very much !
View 6 Replies
View Related
Jul 20, 2005
Hi,I am doing a really simple test with SQL Server 7.0:Using the Query AnalyzerLogged as saLocated in master database#1 USE Test#2 EXEC('USE Test')#1 => the database context is switched to Test#2 => the database is NOT switched???
View 2 Replies
View Related
Sep 3, 2007
Hello Everyone,
I wanted to pass a SQL statement thru a variable, and use that variable in my source component.
SELECT CLINIC_SUK, CLINIC_CODE, CLINIC_DESC, CLINIC_ARABIC, Load_DT
FROM DIM_CLINIC
where load_dt > ?
I had created a variable with my SQL statement and mapped that variable in my source component.
Its giving me some error.
Parameter Information cannot be derived from SQL statement. Set parameter information before preparing command.
Please do inform me about the solution for having a parameter in my source SQL Statement.
View 3 Replies
View Related
Apr 4, 2008
Hi ,
I am testing a very simple query that use variable for sort direction and sort expression
DECLARE
@SortExp nvarchar(256),
@SortDir nvarchar(10)
Set @SortExp = 'curTime'
Set @SortDir = 'DESC'
Select * from table
where recID < 20
order by @SortExp @SortDir
and i got this error...
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
Is there anyway to do this task.
Thanks
Ddee
View 3 Replies
View Related
Dec 16, 2007
Hy, i have this problem in vb.net:
I must use a variable in SQL UPDATE statement, after SET statement, and i'm getting error. This is that line of code:
Dim variable_name As StringDim variable As Integer
Dim sqlString As String = ("UPDATE table_name SET " variable_name " = " & variable & " WHERE UserID = '" & UserID & "'")Dim cmdSqlCommand As New SqlCommand(sqlString, conConnetion)
cmdSqlCommand.ExecuteNonQuery()
When I don't use a variable after SET statement, everything work fine. This code works fine:
Dim variable As Integer
Dim sqlString As String = ("UPDATE table_name SET column_name = " & variable & " WHERE UserID = '" & UserID & "'")Dim cmdSqlCommand As New SqlCommand(sqlString, conConnetion)
cmdSqlCommand.ExecuteNonQuery()
Please, if someone can help me in this...thanks..
View 2 Replies
View Related
Apr 28, 2008
could anyone please help me to resolve this issue?
here's my sql query which retrieve last 3 month data
t.execute(SELECT * tbl1 where nmonth >= datepart(mm,DATEADD(month, -3, getdate())) or nmonth <=datepart(mm,getdate()) and empno='"+emppip+"'")
now instead of passing 3 in this query(datepart(mm,DATEADD(month, -3, getdate())) )
i need to pass a variable to retrieve data based on user requirements.
i tried this way,
dim mno as n
mno=4
t.execute(SELECT * tbl1 where nmonth >= datepart(mm,DATEADD(month, -'"+mno+"', getdate())) or nmonth <=datepart(mm,getdate()) and empno='"+emppip+"'")
its not working.
can i achieve this using stored procedure? or can i directly pass a variable to sql synatax?
thanks for any help
View 8 Replies
View Related
Oct 26, 2005
I'm curious if anyone knows the correct way to do this pseudo-statement correctly? I want to create a stored procedure in which I send it the table name of the table I want to query.declare @tableName varchar(500)set @tableName = 'PortfolioPreferenceOwnership' select * from @tableName
View 4 Replies
View Related
Jan 2, 2001
I am having difficulties with some sql syntax with sql server 2000.
I am trying to write code to update a column in which the name of it is unknown. At run time, I am able to set a variable equal to the correct column name but in doing so, treats the value as a String.
Ex.
Declare @varA varchar(12)
select @varA = (select top 1 Value from #temp)
Update TableX
set @varA = y.ColTest
from TableX x, TableY y
where x.Colid = y.Colid
It sets the variable = to the last value from TableX.ColTest
I want the Update statement to update the value for the Variable which
represents the correct column to update.
Any ideas?
Thanks,
Daniel
View 1 Replies
View Related
