After publishing my ASP.NET application from my local development machine to a server, I cannot get it to attach the database file to the SQL Server instance. The SQL Server is full version 2005. The error I receive is:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
SQL Server 2005 full version is installed on a server computer. I installed MS VS 2005 Express edition on the server. As VS 2005 Express edition can only access to SQL Server 2005 Express edition, so a SQL Server 2005 Express edition has to be installed on the server. I wonder if both SQL Server 2005 full version and Express edition can be installed in the same computer.
Does it means that I cannot use "AttachDbFilename"? I mean, I can't use an attached db file? Should I create all my tables another time? (they use a Web database Admin)
I'm trying to install the common components for SQL 2005 on a server that already has Reporting Services 2005 installed on it. It keeps comng up with an error: "To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter."
The Reporting Services install has had SP2 applied to it, would that be what is messing up the install?
I have very little experience with SQL so any info would be helpful.
I guess this is likely a stupid question, but I have no time for pride riht now...
I installed the evaluation version of SQL Server 7.0 and then installed the full version over top of the evaluation version once I received it.
My problem is that now SQL Server is telling me that the evaluation period has expired! How do I get around this? I assumed that installing a full purchased version would "convert" my installation of the evaluation version to a full version, but it hasn't. Please email with any information as I am trying to track this problem down and may not have time to check back here!
I've downloaded the SQL Server 2005 VHD Evaluation from http://www.microsoft.com/downloads/details.aspx?FamilyID=7B243252-ACB7-451B-822B-DF639443AEAF&displaylang=en and it's running in evaluation mode. I have a valid key and I've activated windows and upgraded to SP2, but I still get an 'about windows' dialog on startup and a watermark on the desktop. Is there any way tp upgrade to the full version?
We are currently running with Eval 120day limit SQL6.5 SP4 and now wish to upgrade to the full version. We have now purchased the full version but whenever we try to "upgrade" the server all we get told is that we should "Use control panel to add or remove components" or we are told that we should "use service pack 3 to update". I can only assume that this message is refering to Add/Remove programs in the control panel but there is no reference to SQL here.
Any ideas how we can upgrade to the full legal version without loosing our SMS data?
I'm planning to transport a desktop application to the web. A spin-off ofthis application has already been put on the web by another programmer. Heused ColdFusion with MS SQL, Access, VC, and Java. It is faster than thedesktop application (written in VFP).1. Can I get the same results using MS SQL Express Advanced and Access forthe internet version if used with .net?2. Are the select statements limited in power, accuracy, size, etc. for MSSQL Express Advanced when compared to SQL?3. If Access will perform poorly, can VFP be used instead with .net? Ialready know it can't be used with ColdFusion. 4. If MS Express Advancedwill not sufficiently replace SQL, will MySQL do the job better?Thanks
I've installed all the options from the sQL server CD but can't find how to install the Management Studio. I'm missing something obvious, but beat's me where it is.
I've got an issue - A client required SQL 2005 for a new CRM package. They run SBS 2003 standard R2, so I ordered the upgrade to premium. No worries, but the developer needed SQL before the package arrived, so we installed the eval version, and then applied SP2 because this was needed for the CRM package.
Now the full version has arrived. I tried running setup both with and without SKUUPGRADE=1 and neither way will let me upgrade, stating that a later version is already in use.
I do have a good backup of the databases (I also have an entire image-based backup as well) but I don't want a disaster. My question: Do I uninstall SP2 then upgrade to the RTM version of SQL2005 workgroup edition (the one with SBS2003 premium) or is there some other trickery required?
I'd prefer to get a smooth upgrade rather than ending up in a situation where I'd have to restore a heap of things.
I was getting SQL Server errors trying to run the Time Tracker kit, so I tried to establish a connection with the timetracker.mdf from the VWD Database Explorer - but no luck:
Data Source: Microsoft SQL Server Database File (SqlClient)
I installed the evaluation copy remotely and wish to register the product by entering its product key, would that possible since I don't have the cd in the box.
HI, We upgraded to SQL Server 2005 Standard Edition for our ASP.NET 2.0 website. We were using SQL Server Express 2005. That worked fine. Now we are unable to connect to the database. I have googled, but I just cann't figure out what is going on. Any help is appreciated. Here is the error. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) In our firewall sqlbrowser.exe and sqlservr.exe are allowed. Thanks Matt
I used the following connection string when working with a SQL server DB locally in an ASP.NET code-behind module: dim source as string="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|Registration.mdf;User Instance=true"
However, when I uploaded the application to a web server where my site is hosted, I spent considerable time debugging the "Cannnot establish connection" exception, I was getting.
After adding "Database=Registration.mdf;server=<server N/W address>" and removing "AttachDBFilename=|DataDirectory|Registration.mdf;" from the connection string, the connection was finally established.
Now, I have two questions: What's the difference between database and attachDBFileName options (And when should I use which)?
Secondly, why I had to add the server option, when it worked fine locally, and the application & db are located on the same web server?
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio ------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported. Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Does anyone know how to get SQL Server versions, Service pack versionsand the Server that instance of SQL is running on a network. I haveseen some threads on how to list SQL servers in a network but I need tofind more info about these SQL servers.Any help appreciated..!Thx...
Hello, I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development". How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict? Thanks,
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to back up file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file], MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to backup file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file]', MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
