I have a SP with where condition
as where id=@id and month=@month and Eid=@Eid
What I need is if @Eid=0 i need to display all the records
if Eid>0 then display only that particular reocrd
I tried
where id=@id and month=@month and Eid=
case when @Eid=0 then Eid>0
else
Eid=@Eid
End
But its giving me error
Incorrect syntax near '>'.
Is it possible to have more than one conditions per line? Example below. It works fine if I do this, "When 'M" then 'Yes' But, I am trying to have it to check for more than one. The below example does not work. What can I do to do something like this.
SELECT
FirstName, LastName,
CASE WorkCode
WHEN 'M', 'E', 'F' THEN 'Yes'
WHEN 'C', 'D' THEN 'No'
END
FROM Employees
Hello:Is it possible to use CASE expression in AND condition? i.e.------------------------------------------CREATE PROC spBlah( @id INT, @val INT)ASSELECT * FROM aTableWHERE tableID = @idAND ( CASE @val WHEN 1 THEN otherCol = someValue END CASE @val WHEN 2 THEN otherCol != someOtherVlaue END )-------------------------------------------
View 2 Replies View RelatedI have data for moths which are commulative, for example Feb where month is 02, ecul Jan. + Feb. data. I would like to have the data for only Feb = when month '02' Feb = data for '02' - data for '01'. I would like to writ these commands: For Jan there is no problem to write the command but for other months I am not sure how to write the commands for months other than Jan.
,Jan_qty_1 = case
when [stat_month] = '01' then cast(sum(cast([qty_1_mo] as bigint)) as bigint)
else CAST('0' as int)
end
[Code] ....
here is the data:
ust_code district stat_year stat_monthqty_1_mo
24105220070112619
2410522007022200
2410522007024438
2410522007030
24105220070314434
2410522007042295
2410522007040
2410522007050
2410522007050
241052200706454
below is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
I have a table exam_setup
CREATE TABLE exam_setup
(
setup_id INT,
sub_id INT,
assignment decimal(4,1),
[Code] ....
I have to fetch the values like
assignment = 25
attendance = 15.5
INT_1 =0
INT_2 =0
if decimal point is 0 then have to return integer value only.. but the below query doesn't work, why?
[Code] ....
I've a variable in my SP that I'd like to use to change the format of my output. Try this!
select case when 1=2 then cast(1 as decimal(10,2)) else cast(2 as decimal(10,0)) end
Then this:
select case when 1=1 then cast(1 as decimal(10,2)) else cast(2 as decimal(10,0)) end
Why in either case, the output is returned as n.nn ? Whilst single select expressions (like these):
select cast(1 as decimal(10,2)) -- = 1.00
select cast(2 as decimal(10,0)) -- = 2
Work fine.
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS", otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST", otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAME CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
I write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedHello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies View RelatedI am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedI have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database.
Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case.
In other words how do deal with case sensitiviy issues.
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View Related da = New Data.SqlClient.SqlDataAdapter("SELECT [Products].[Names], Count([ProductList].[Products]) AS [Total] FROM [Products] LEFT JOIN [ProductList] ON [ProductList].[Names] = [Products].[Names] GROUP BY [Products].[Names] ", strConnection)
can we use a where condition in the statement.If so how can we use it.
Hi all,I'm building a DataSet on Visual Studio and don't know how to do a condition (if/else) with SQL... I have a search form, with a DropDownList and have 2 options in it: Search by Title or Search by Author. If the "Title" is selected, then the value is "title and if "Author" is selected, then the value is "author".Here is what I have right now for the DataSet, as seperated queries but I think I can combine them to be one single query 1.This will returns the songs that matches the title:SELECT LYRICS_PK, LYRICS_TITLE, LYRICS_TITLE2, LYRICS_WRITER, LYRICS_WRITER2, LYRICS_COWRITER, LYRICS_DATE_ADDED, UserId_FK, LYRICS_APPROVED, LYRICS_TYPE, LYRICS_VIEWS, LYRICS_ADDED_BYFROM t_lyricsWHERE ((@LYRICS_TITLE IS NULL) OR (LYRICS_TITLE LIKE '%' + @LYRICS_TITLE + '%') OR (LYRICS_TITLE2 LIKE '%' + @LYRICS_TITLE + '%')) AND (@LYRICS_TYPE = 'title') 2. This returns the songs that matches the author: SELECT LYRICS_PK, LYRICS_TITLE, LYRICS_TITLE2, LYRICS_WRITER,
LYRICS_WRITER2, LYRICS_COWRITER, LYRICS_DATE_ADDED, UserId_FK,
LYRICS_APPROVED, LYRICS_TYPE, LYRICS_VIEWS, LYRICS_ADDED_BY
FROM t_lyrics
WHERE ((@LYRICS_AUTHOR IS NULL) OR (LYRICS_AUTHOR LIKE '%' +
@LYRICS_AUTHOR + '%') OR (LYRICS_AUTHOR2 LIKE '%' + @LYRICS_AUTHOR + '%'))
AND (@LYRICS_TYPE = 'author') This is very inefficient because I have 2 queries, and I need to build 2 ObjectDataSources as well as 2 different GridViews to display the results. I think we can do something likeSELECT .... ... FROM t_lyricsif (@LYRICS_TYPE = 'title') DO THE WHERE CLAUSE THAT RETURNS MATCHES WITH TITLEelse if (@LYRICS_TYPE = 'author') DO THE WHERE CLAUSE THAT RETURNS MATCHES WITH AUTHOR But I don't know how to write that in T-SQL.Any help would be greatly appreciated,Thank you very much,Kenny.
hi
i want to give .text filed of a TextBox to where condition but the result is not correct.
The SQL is like following:
selStr = "SELECT COUNT(*) FROM Users WHERE (Name = usernameTextBox.Text) and (Password = passwdTextBox.Text)"
i have a table like this
ID DATE time status
01 11/11/2011 10.23 Entry
02 11/11/2011 11 .47 Exit
03 11/11/2011 12.54 Entry
04 11/11/2011 2.54 Exit
i want to select the minimum time from entry and maximum time in exit.
the status should be checked when taking the max and min values .
how to do this.
Hi,I want to write a SQL stmt.(condition) that checks the following @ActionPLanID > 0 and ActionPlanID exists in table A simultaneously?
I was thinking of using IF NOT exists but don't know how to write it. Am I going in the right direction?
Thanks,
VBJP
hi,
i'm working on a query and have discovered something fairly simple regarding "and" / "or" condition.
if I use e.g.
id_product in ('1111','2222')
as a result i should get all products that match id = 1111 and id = 2222.
But if I do it like
id_product in ('1111')
and id_product in ('2222')
as a result i get 0 rows returned, where as i want to find invoices that have both products, and not those which have either product 1111 or 2222 or even both :)
thank you for any suggestions!
I have a query something like
select a, b, c from mytable where a=@prmA
If prmA is something like generic all, any, I want this query return value without condition. Is there a way to do this with sql or I should write stored procedure that checks @prmA and all other condition parameters and generate new SQL statement?
Regards,
Hakan
Hi All,
I have stored Candidates Resume in binary(Image) format in database.
I have a search feature to search resume.
For Example:
with all these words: ASP.Net, SQL Server, 2 Years
without these words: Java
Here I get Candidate which CONTAINS("ASP.Net" AND "SQL Server" AND "2 Years" AND NOT "Java")
Now I want to search candidates only
without these words: Java
it means the condition is CONTAINS(NOT Java)
is this possible?
if yes, how?
Thanks in advance.
Hi,
In following query, I use three conditions in WHERE caluse. When I use only CreditUnion.Id=@CreditUnionID
Then I get the right value set. But when I join other two conditions , i get all the values instead of relevant data for that parameter.
Can anyone say why it happenes?
Code Block
SELECT
Member.LastName + ' ' + Member.FirstName AS MemberName, CASE WHEN CuStatus = 'Existing' THEN 'Existing' ELSE 'New' END AS MemberType, EnumCUMembershipStatus.UIText AS Status, CDOrder.DecidedOnCU, SysUserLogon.LastName + ' ' + SysUserLogon.FirstName AS CUDecisionOfficer, 'CD' AS ProductType, CreditUnion.Name
FROM
Member INNER JOIN
CDOrder ON Member.LastCDOrderFK = CDOrder.Id AND Member.Id = CDOrder.MemberFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id INNER JOIN
EnumCUMembershipStatus ON Member.CuStatus = EnumCUMembershipStatus.Name INNER JOIN
SysUserLogon ON CreditUnion.Id = SysUserLogon.CreditUnionFK
WHERE (CreditUnion.Id = @CreditUnionID) AND (Member.CuStatus = 'Approved') OR (Member.CuStatus = 'Declined')
UNION
SELECT
Member_1.LastName + ' ' + Member_1.FirstName AS MemberName,
CASE WHEN CuStatus = 'Existing' THEN 'Existing' ELSE 'New' END AS MemberType, EnumCUMembershipStatus_1.UIText AS Status, LoanApplication.DecidedOnCU, SysUserLogon_1.LastName + ' ' + SysUserLogon_1.FirstName AS CUDecisionOfficer, 'Loan' AS ProductType,
CreditUnion_1.Name
FROM
Member AS Member_1 INNER JOIN
LoanApplication ON Member_1.LastLoanApplicationFK = LoanApplication.Id AND Member_1.Id = LoanApplication.MemberFK LEFT OUTER JOIN CreditUnion AS CreditUnion_1 ON Member_1.CreditUnionFK = CreditUnion_1.Id LEFT OUTER JOIN EnumCUMembershipStatus AS EnumCUMembershipStatus_1 ON Member_1.CuStatus = EnumCUMembershipStatus_1.Name LEFT OUTER JOIN SysUserLogon AS SysUserLogon_1 ON LoanApplication.SysUserLogonFK = SysUserLogon_1.Id AND LoanApplication.SysUserLogonCUFK = SysUserLogon_1.Id AND CreditUnion_1.Id = SysUserLogon_1.CreditUnionFK
WHERE (CreditUnion_1.Id = @CreditUnionID) AND
Member_1.CuStatus = 'Approved' OR Member_1.CuStatus = 'Declined'
I am an ASP.NET Developer I am using two SQL Server databases, 2005 and sql express.I am using a select statement on an IN CONDITION
One table, Table name = SOP10100 resides in a SQL Server 2005 DatabaseThe other table, Table name = ORDER resides on a SQL server express Database
I am writing the following sql statement
SELECT ORDERNO, CARRIER FROM SOP10100WHERE ORDERNO IN ('ORD000234','ORD000384',....)
My question is how many values can I fit on this IN conditionI mean the maximum number of values (upperlimit)
Is there a better way to do this Using ASP.NET ?
Hi This is madhavi
am working with a project with ASP.NET Using VB.NET..
i have requirement that i have to provide the result based on search condition....
First : For Serach i have to search based on given CITY and CATEGORY....
For this i have written a StoredProcedure like:
******************************************************************************************************************
Create PROCEDURE YellowPages_Search(@city nvarchar(50),@SearchWord nvarchar(200),@Name varchar(50) OUTPUT,@CompanyName varchar(50) OUTPUT,@Address varchar(1000) OUTPUT,@PhoneNo varchar(50) OUTPUT,@MobileNo varchar(50) OUTPUT,@Fax varchar(50) OUTPUT,@Email varchar(50) OUTPUT,@WebSite varchar(50) OUTPUT)AS
declare @sql nvarchar(1000)set @sql='select * from YellowPages_Userdetails where city='''+@city + '''and (category like ''%' + @SearchWord + '%'' or subcategory like ''%' + @SearchWord + '%'') '
exec(@sql)
GO
*************************************************************************************************************************************************************************
Now i want to extend this search condition for LOCATION and SUBCATEGORY
means my search condition should include CITY , LOCATION , CATEGORY and SUBCATEGORY
(here the location and subcategory may be given or may not be given)
so please help me out
Thanks in Advance,
Madhavi